Used Hydrap Hydraulic Press,100T Press,C-Frame Press for sale (73,766)

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Pjdpfx Abovvkmbousgu Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2026, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Podeztfbwjpfx Abujgu Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Psdpfx Abedzqddjusgu Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Pgsdpfx Ajy Hqz Sobueu Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally Psdpoyupuljfx Abuegu - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Pgsdjr I E Itopfx Abuou Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Technical data: Psdpfx Abezryy Sjusgu - Cylinders: 6 - Hold-down units: 3 - Pressing area: 260 x 145 cm

Condition: new, 4 glueing poles, 1 pressing bar, hydraulic, external sizes L x H 3000 x 2000 mm, ca. 200 kg Pgodpfsvrv H Sjx Abuou

Condition: excellent (used), Year of construction: 1998, Model Amada APX 8025 8 Axis CNC Hydraulic down stroking Press Brake with Operateur II 7 axis CNC control Erwin sick machine mounted light screen guarding system year 1998 stock no. 01834 specification 80 TONS CAPACITY X 2500 7 AXIS CNC CONTROL HYDRAULIC UPSTROKING PRESS BRAKE description TYPE HYDRAULIC UPSTROKING CONTROL OPERATEUR 2 BENDING PRESSURE 80 TONS BENDING LENGTH 2500 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 7 Podpewybcyofx Abusgu AXIS CONFIGURATIONS 1-X YI-Y2 RI-R2 Z1-Z2 GUARDS ELECTRONIC SIDE FENCING REAR INTERLOCKED MACHINE HEIGHT 2300 MOTOR POWER 7.5 KW

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Pgedpjgrkigofx Abusu Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). Psdpsz Snrnefx Abuegu The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. Pedpfo Ad Hmgox Abujgu The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Pgedpfou D Dhxox Abueu Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: used, Year of construction: 2008, machine/vehicle number: 1540.18, functionality: fully functional, pressing force: 160 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,000 mm, total width: 3,200 mm, total height: 5,200 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 160 T. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,200 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, insert molding, and assembly operations in industrial applications. ##### Technical data + information: Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm ==== General information - Manufacturer: HYMAG - Type: Hydraulic 4-column press - Model: HS 4-160K - Machine number: 1540.18 - Year of manufacture: 2008 - Pressing force: 160 T - Table size (working area): 2,000 × 1,400 mm - Table height: 800 mm - Open height: 1,200 mm - Stroke: 700 mm - Overall height: 5,000 mm - Overall width: 3,200 mm - Overall depth: 2,000 mm - Overall weight: 28 T - Basement required: no ==== Hydraulic cylinder - Stroke: 700 mm - Max. working pressure: 280 bar - Return speed downwards: 220 mm/s - Return speed upwards: 150 mm/s - Initial pressing speed: 45 mm/s ==== Hydraulics & drive - Main motor: 55 kW - Auxiliary hydraulics: 7.5 kW - Oil tank: 600 l - Pneumatic pressure accumulator: yes ==== Control - Control: SIEMENS SIMATIC C7 - Control panel: pendant control panel - Two-hand operation ==== Safety - Blanking force limitation - Maintenance platform - Emergency stop - Light curtain / light barrier - Protective grating - Separate control cabinet ##### Application areas: Forming, deep drawing, straightening, insert molding, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-column press, 4-column press, hydraulic press, HYMAG, HYMAG HS 4-160K, 160 T press, 160 ton press, forming press, deep-drawing press, straightening press, insert molding press, assembly press, industrial press) Pjdpfx Ao Adtl Aobujgu Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all points of the national Brazilian safety guideline NR 12, which is based on them. Our core strength lies in the design and construction of custom-made machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A Pgjdpsz Sva Hofx Abuju - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Psdpfxjv Sd S Ne Abujgu Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate oil cooler Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Polzer frame press – hydraulic, with 4 press plungers and lateral pressure device For sale is a robust Polzer frame press from the machine engineering sector, manufactured in 1992. This press is ideally suited for the production and gluing of wooden frames, doors, window frames, and other frame constructions in carpentry and joinery applications. The four hydraulic press plungers are particularly noteworthy, as they enable uniform pressure distribution and support the precise gluing of frame constructions. The additional lateral pressure device allows the workpieces to be aligned and compressed laterally. This allows frames to be glued together accurately and at right angles. Equipment and advantages Pedpfxs Abbd Ie Abuegu - 4 press plungers for uniform and targeted pressure distribution - Hydraulic pressing device for powerful and comfortable operation - Lateral pressure device for compressing and aligning the frames - Robust, solid steel construction - Versatile for use with various wooden frame constructions - Ideal for carpentry shops, joineries, and wood processing companies Technical data - Manufacturer: Polzer Maschinenbau GmbH, Herborn - Machine type: according to the nameplate, probably RP 30/21 - Year of manufacture: 1992 - Drive: hydraulic - Mains connection: according to the nameplate, 380 V - Motor power: according to the nameplate, probably 1.5 kW The Polzer frame press impresses with its robust design and the practical combination of four press plungers and a lateral pressure device. This is an interesting machine for anyone who wants to glue frame constructions efficiently, precisely, and reliably. On-site inspection (Luxembourg) is possible by appointment. The price is gross for net within the EU outside of Luxembourg, meaning 0% VAT.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press Pjdpfx Ajy Uiyvebujgu This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: used, Year of construction: 2022, Force: 3000 kN; Stroke: 250 mm; Dimensions: 705 x 500 x 500 mm; Weight: 11.5 tonnes; Hydraulic press, nominal pressure: 260 bar; Maximum pressing force: 300 tonnes. Pjdpfxezgv Rco Abuogu

Condition: used, The second-hand Maweg Euronova-S hydraulic frame press is designed for pressing and assembling windows, doors and frames in professional woodworking. Featuring swivelling pressure shoes, it is also suitable for sloping windows. Pedpez Hiurefx Abujgu Technical data: - Press height: 2,250 mm - Press width: 4,500 mm

Condition: excellent (used), Year of construction: 2004, specification 150 TONS X 4000 4 AXIS CNC HYDRAULIC DOWN STROKING PRESS BRAKE COMPLETE WITH FULL LENGTH TOP AND BOTTOM TOOLING INCLUDING A BOTTOM MULTI VEE BLOCK description TYPE HYDRAULIC DOWNSTROKING BENDING LENGTH 4000 BENDING PRESSURE 150 TONS CONTROL CYBELEC DNC 60 NO OF AXIS 4 AXIS CONFIGURATION X1 Y1 R MAX SPEED 80mm/SEC STROKE 180 mm GUARDS MACHINE MOUNTED ELECTRONIC GUARDS SIDE AND REAR INTERLOCKED FENCING WEIGHT 11200 KG SERIAL NO. 6150/11324 MOTOR SIZE 7.5 KW Podpfxjh N Dqrs Abuegu YEAR OF MAUFACTURER 2004

Year of construction: 2005, condition: like new (used), Used Kojima 2200ton hydraulic H frame press for sale Machine Type Hydraulic Press Make Kojima Capacity 2200 tons Stroke 1200 mm Daylight 1800 mm Slide 3200 x 1800 mm Moving Bolster 3200 x 1900 mm Moving Bolster Stroke 2500 mm Moving Bolster Speed 100 mm/sec Die Cushion 100 – 500 ton Pgodpfx Abelqxg Houeu Cushion Stroke 450 mm Cushion Pad 2000 x 1275 mm Cushion Pin 50 mm dia Slide descending speed 235 mm/sec Hydraulic Tank 3200 litre

Condition: used, Year of construction: 2015, machine/vehicle number: 1606.18, functionality: fully functional, pressing force: 163 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,400 mm, total width: 3,200 mm, total height: 5,200 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 163 T. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,300 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, inserting, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm ==== General Information - Manufacturer: HYMAG - Type: Hydraulic 4-Column Press - Model: HS 4 160-K3 - Machine Number: 1606.18 - Year of Construction: 2015 - Pressing Force: 163 T - Rated Force: 1,600 kN - Table Size (Working Area): 2,000 × 1,400 mm - Ram Plate Size: 2,000 × 1,400 mm - Table Height: 800 mm - Open Height: 1,300 mm - Stroke: 700 mm - Front Clearance: 2,010 mm - Side Clearance: 900 mm - Overall Height: 5,200 mm - Overall Width: 3,200 mm - Overall Depth: 2,400 mm - Total Weight: 28 T - Basement Required: No ==== Hydraulic Cylinder - Max. Working Pressure: 305 bar - Return Speed Downwards: 220 mm/s - Return Speed Upwards: 150 mm/s - Initial Pressing Speed: 45 mm/s ==== Hydraulics & Drive - Main Motor: 55 kW - Additional Hydraulics: 7.5 kW - Auxiliary Motor: 7.5 kW - Cooling Motor: 1.5 kW - Oil Tank: 600 l - Drive Type Pump (Drive I): V30D115RKN - Drive Type Additional Hydraulics (Drive II): PGH3-2X/016 - Cooler Type: TFS/A-20-400 ==== Tooling - T-Slots: M20 according to DIN 650 ==== Control System - Valve Voltage: 24 V ==== Safety - Shear Pad Dampening - Maintenance Platform - Follow-Up Travel: 17 mm - Follow-Up Time: 90 ms - Safety Distance: 180 mm ==== Electrical Connection - Operating Voltage: 400 V - Main Motor Current Draw: 98 A - Auxiliary Motor Voltage: 400 V - Auxiliary Motor Current Draw: 15 A - Cooling Motor Voltage: 400 V Pjdpezq Apgsfx Abuogu - Cooling Motor Current Draw: 4 A ##### Application Areas: Forming, deep drawing, straightening, inserting, embossing, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-Column Press, 4-Column Press, Hydraulic Press, HYMAG, HYMAG HS 4 160-K3, 163 T Press, 163 Ton Press, Forming Press, Deep Drawing Press, Straightening Press, Inserting Press, Assembly Press, Industrial Press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which builds upon these. Our core strength is in the design and construction of custom machinery and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: excellent (used), functionality: fully functional, Well-maintained W&D gate-type press, model GXW 71 VH. Frame width 710 x 710 mm. Stroke 500 mm. Infinitely variable hydraulic feed. Hydraulic cylinder lift with adjustable cylinder pressure. Drive. Saw attachment. Electric remote control. Clamping carriage and wedge with electric adjustment. Pgodpfx Abezz Iu Aousu From a small operation. Also interesting as a source of spare parts.

Condition: new, Year of construction: 2026, pressing force: 200 t, Sheet metal bending press – 200 T – Open width 1,600 mm For sale is a hydraulic sheet metal bending press from the manufacturer DURENDUS with a maximum pressing force of 200 T. The machine has an open width of 1,600 mm, a maximum installation height of 1,200 mm, and a stroke of 1,000 mm, making it suitable for bending, forming, and straightening operations in industrial applications. ##### Technical data + information: Sheet metal bending press – 200 T – Open width 1,600 mm ==== General information - Reference ID: ME-2026-A-180_DE-2026-ME-215-01 - Design: 2-column frame press - Manufacturer: DURENDUS - Pressing force: 200 T (adjustable) - Open width: 1,600 mm - Open height: 1,200 mm - Ram surface area: 1,500 mm - Table height from the floor: 850 mm - Overall dimensions (W × D × H): approx. 1,300 × 2,700 × 3,900 mm - Total weight: approx. 5,300 kg ==== Hydraulic cylinder - Stroke: 0–1,000 mm - Working pressure: 270 bar - Cylinder diameter: Ø 220 mm - Piston rod diameter: Ø 130 mm - Column guides: Ø 160 mm - Working speed: 3 mm/s - Approach speed: 9 mm/s - Retract speed: 20 mm/s ==== Hydraulics & Drive - Hydraulic pump: ASC - Flow rate: 40 l/min - Motor power: 7.5 kW - Pressure accuracy: ±5 bar - Tank volume: 160 l - Hydraulic oil: HLP46 (not included in the scope of delivery) ==== Control system - Operation: Foot pedal - Pressure adjustment: manually via rotary control - Stroke limitation: manually via sensors - Safety PLC - Control panel with warning and status indicators ==== Safety - Safety PLC - CE-compliant design - Safety monitoring of all processes ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 7.5 kW - Total connection power: approx. 11 kW - Protection class of the switch cabinet: IP54 ##### Application areas: Bending, forming, sheet metal processing, metalworking, steel construction, container construction, mechanical engineering, contract manufacturing, small series production Pgsdozg Nu Ujpfx Abuou (Sheet metal bending press, hydraulic sheet metal bending press, hydraulic press, 200 T press, 200-ton press, bending press, sheet metal bending machine, forming press, industrial press, coil bending press, battery coil press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all aspects of the national Brazilian safety standard NR 12, which is based on these. Our strength lies in the design and construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. The hydraulic systems of the presses primarily use components from leading European manufacturers.