Used Hydraulic Pressure Switch for sale (29,846)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Psdpfxefzrapo Abgopu • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Psdpfx Abefz A D Negspu User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t Pedpfx Aotndu Uebgepu CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions Ppodpjcmat Uofx Abgou

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Podpou Axfcjfx Abgspu Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Spring & Hydraulic Cone Crusher: Design, Operation, and Technical Insights Cone crushers are vital in mining, metallurgy, and aggregate production, designed for secondary and tertiary crushing of hard and medium-hard materials. Among the most common types are the spring cone crusher and the hydraulic cone crusher, each offering distinct advantages in structure, performance, and control. Spring Cone Crusher The spring cone crusher is a traditional design that uses mechanical spring systems for overload protection. When uncrushable material enters the crushing chamber, the spring mechanism allows the bowl liner to move downward, preventing damage to the crusher. Once the foreign object passes, the springs restore the original position, ensuring continuous operation. Structural Composition: Main frame and base assembly Eccentric shaft and transmission system Fixed and moving cones (mantle and concave) Spring and adjustment mechanism Working Principle: Material is fed into the crushing chamber and compressed between the mantle and concave. The laminated crushing principle ensures that particles are crushed by both impact and pressure, producing uniform and well-shaped aggregates. Technical Highlights: Feed size: ≤300 mm Discharge size: 3–60 mm Capacity: 30–700 t/h Motor power: 75–400 kW Advantages: Simple structure, low maintenance cost, stable performance, and reliable overload protection. Applications: Widely used in crushing granite, basalt, iron ore, copper ore, and limestone. It is suitable for medium-scale operations where cost efficiency and durability are priorities. Hydraulic Cone Crusher The hydraulic cone crusher is an advanced evolution of the spring design, integrating hydraulic systems for improved automation, safety, and precision. It replaces the mechanical spring system with hydraulic cylinders that control the discharge opening and provide overload protection. Structural Composition: Main frame and eccentric assembly Hydraulic cylinders and control system Crushing chamber with optimized liner design Automatic lubrication and hydraulic adjustment units Ppsdpfx Astxhybjbgju Working Principle: The hydraulic system adjusts the discharge opening and releases pressure automatically when uncrushable material enters. This prevents mechanical damage and allows the crusher to resume operation quickly. The combination of high-speed eccentric motion and optimized chamber geometry enhances crushing efficiency and product quality. Technical Highlights: Feed size: ≤320 mm Discharge size: 3–50 mm Capacity: 45–1200 t/h Motor power: 90–630 kW Advantages: Automatic cavity cleaning, precise control, high crushing ratio, and superior particle shape. Applications: Ideal for large-scale mining, aggregate production, and high-demand crushing lines requiring consistent output and minimal downtime. Comparative Overview Both crushers operate on the same compression principle but differ in control and automation. The spring cone crusher offers simplicity and cost-effectiveness, making it suitable for stable working conditions. The hydraulic cone crusher provides advanced control, faster adjustment, and higher efficiency, ideal for modern, large-capacity plants.

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Pedpfx Abszd Uv Ejgjpu Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: used, Marvel Townsend StorkDMM50 meat bone separator to produce best quality low pressure deboned meat when used in conjunction with a Baader or SEPAmatic. This machine has come direct from a closed meat factory in Scotland. Almost impossible to find these machines on the used market. Ppsdpfx Abslkc I Rjgju

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: Pjdpfx Aoru Evgebgspu 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Condition: excellent (used), functionality: fully functional, Cutting Length 6100mm Cutting Capacity 25mm Angle 0.5-2.5 Strokes per minute 3-5. Psdpfx Asygd Auobgopu Number of hold downs 36 Blade gap 0.005-3.00 Throat Depth 500mm

Condition: used, Edwards Truecut 10 x 3000mm Shear Ppjdpfx Abezdicdsgou Capacity mild steel 10mm Capacity in Stainless Steel 8mm. Capacity in Aluminium 13mm. Powered backgauge Elgo readout Shadow line Wandering foot pedal 1 x squaring arm 2 x support arms Rake adjustment Rear safety fencing

Condition: used, Adira GH0640 4000mm x 6mm Guillotine (2015) Maximum Mild Steel Capacity (450 N/mm²) 6.5 mm Maximum Stainless Steel Capacity (700 N/mm²) 4.0 mm Cutting Length 4,050 mm Frame Gap 260 mm Blade Clearance Adjustment 0.05 – 1.1 mm Number of Hold-Down Cylinders 19 Backgauge Range 1,000 mm Ppjdezdgnzepfx Abgju Cutting Angle (Rake Angle) 1° 3' Machine Length 4,980 mm Machine Width 2,840 mm Transport Width 2,180 mm

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, HYDRAULIC SHEAR LVD HD CS 31x13 Serial number: 34887 Year of manufacture: 2007 TECHNICAL SPECIFICATIONS Max. sheet thickness (St45): 13 mm Cutting length: 3100 mm Range of back gauge: 750 mm Ppjdszg Dp Topfx Abgeu Min. cutting angle: 0.5° Max. cutting angle: 2.5° Min. number of strokes/min: 7 Max. number of strokes/min: 35 Min. blade clearance: 0.05 mm Max. blade clearance: 2.2 mm Motor power: 15 kW Weight: 8700 kg OPTIONS: Electrical adjustment of back gauge (1000 mm) with digital readout. Electrical adjustment of cutting angle. Adjustable blade clearance. With 90° square arm front support. Foot pedal. CE safety standards.

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used 3-meter plate shear from Baykal Type: HGL 3100 x 8 Capacity: 3100 x 8 mm (steel) Psdpfx Abjzgt Tbjgspu Electric NC back gauge Year of manufacture: 2006

Condition: good (used), Hydraulic demolition shears, mobile hydraulic demolition shears, hydraulic scissors Pjdpfxjzhnh Ne Abgopu -Manufacturer: Bieri, mobile hydraulic demolition shears -Operating pressure: bar -Opening width: 310 mm -Operation: with hand switch -Dimensions: 1200/800/H740 mm -Weight: 171 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: Linde, double-acting hydraulic cylinders for forklifts -Item No.: 613596 -Stroke: 75 mm -Piston rod: Ø 22 mm -Hole: Ø20 mm / Hole spacing 287 mm -Number: 2 cylinders available Ppedpozhlcqsfx Abgeu -Price: per piece -Dimensions: 345/68/H90 mm -Weight: 3.9 kg/pc.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: Baumann, double-acting hydraulic cylinder from side loader -Stroke: 1275 mm -Piston rod: Ø 40 mm -Hole: Ø25 mm / Hole spacing 1525 mm -Quantity: 1 cylinder available -Dimensions: 1575/80/140 mm Ppjdpfxjzg Ud Uj Abgsu -Weight: 36 kg/pc.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: Baumann, double-acting hydraulic cylinder from side loader -Stroke: 180 mm -Piston rod: Ø 60 mm -Hole diameter: Ø25 mm / Hole spacing 400 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 455/127/164 mm Pedpfszg Udzjx Abgjpu -Weight: 20 kg/pc.

Condition: used, mileage: 305,000 km, power: 300 kW (407.89 HP), first registration: 09/2008, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 10,050 mm, total width: 2,500 mm, Year of construction: 2008, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, = Additional Options and Accessories = - 6x2 - Digital tachograph - Lift axle - Air suspension - Power take-off (PTO) - Radio/CD player - Sun visor = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,946 cc Axle Configuration Front axle: Tire size: 385/65 R 22.5; Steerable; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80 R 22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire size: 315/80 R 22.5; Steerable; Tire tread depth left: 75%; Tire tread depth right: 75%; Suspension: Air suspension Weights Unladen weight: 18,629 kg Payload: 9,371 kg GVWR: 28,000 kg Functional High-pressure pump: Yes Water tank: Yes Hoses: Yes Condition Damage: None Ppsdpozhlngefx Abgju

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Bahco, hydraulic pump hand pump, two-stage Ppodpfx Abohmgz Togju -Type: P2508 -Pressure range: up to 80 Mpa / 800 bar -Oil volume: 2.5 L -Quantity: 6x hand pump available -Price per piece -Dimension: 600/145 / H180 mm -Weight: 14 kg/pc.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir, filter and valves Pedpjzg Emysfx Abgepu -Type: NHY-40-12.2-160-4/400/230V -Hydraulic pump: Pressure up to 200 bar -Flow rate: 12 l/min -Motor: -Hydraulic reservoir: with level indicator -Individual components: see photos -Dimensions: 515/415/H680 mm -Weight: 79 kg

Condition: good (used), Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump Psdpszg Dmxsfx Abgepu -Manufacturer: Lowara, Multi-stage vertical centrifugal pump -Type: 5SV07F022T -Motor: 2.2 kW / 2860 rpm -Protection class: IP55 -Flow rate: max. 8.5 m³/h -Number: 2x pumps available -Price: per piece -Dimensions: 250/210/H685 mm -Weight: 30.2 kg

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, air cushion tables, movable tables, infinitely variable feed rate of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, Cutting width: 4,200 mm, Max. cutting height: 72 mm, Number of clamps: 6 pcs, Feed rate saw unit max.: 100 m/min, Feed rate for width stop max.: 80 m/min, Main saw motor power: 11 kW, Pedpfxoyrqrto Abgepu Scoring saw motor power: 1.5 kW, Main saw blade Ø: 300 x 30 mm, Scoring saw blade Ø: 180 x 30 mm, Extraction port Ø bottom: 140 mm, Extraction port Ø on pressure beam: 3x100 mm, Airflow volume: 5,000 m³/h, Compressed air connection: 6 bar, Air consumption: 140 l/min, Nominal current: 38 A, Max. circuit breaker: 50 A Quality information: - complete basic inspection - complete basic cleaning - Electrics checked - immediately ready for operation

Condition: excellent (used), Panel saw HOLZ-HER Cut 70 6110 - used - PC control with optimization, scorer, automatic cut length detection, side pressing device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer ----- Technical data ----- Cutting length: 3900 mm, Cutting width: 3100 mm, max. cutting height: 70 mm, Number of clamping devices: 6 pieces, Feed rate saw unit max.: 0-70 m/min., Feed rate width guide max.: 25/70 m/min., Motor power main saw: 11 kW, Motor power scorer: 1.1 kW, Saw blade main saw Ø: 350 mm, Saw blade scoring saw Ø: 180 mm, Extraction port Ø bottom: 120 mm, Extraction port Ø on the pressure beam: 3 x 120 mm, max. fuse rating: 35 A, Rated current of the largest consumer: 20.6 A Quality information: Pjdpfoyu N Rgsx Abgopu - Saw spindle newly bearinged - Scorer newly bearinged - complete basic inspection - complete basic cleaning - electrical system checked - ready for immediate use

Condition: good (used), Centrifugal pump, water pump, domestic water pump, garden pump, high-pressure centrifugal pump -Manufacturer: WILO, High-pressure centrifugal pump type Helix V1008-1/16/E/KS/400-50 Psdpfjwyaryox Abgspu -Power: 3 kW -Flow rate: l/h -p max: 16 bar -Number: 2x pumps available -Price: per piece -Dimensions: 250/240/H950 mm -Weight: 47 kg/unit