Used Ika Ms1 for sale (965)

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, year of last overhaul: 2026, Erika Record Automat bread roll press Dedpfjyurfmjx Anzekr TOP Erika Record Automat, 30-piece set Partially refurbished head New stainless steel blades With 3 forming plates Easy to clean Only available from us, DGUV V3 certified Connection: 400V, 16A-CEE plug Used machine, overhauled Warranty + spare parts service Visit our wide selection!

Condition: excellent (used), very good condition. Dkedpfx Anjzkvpgjzor

Condition: ready for operation (used), Year of construction: 2008, operating hours: 2,288 h, functionality: fully functional, machine/vehicle number: 936, workpiece weight (max.): 150 kg, power: 8 kW (10.88 HP), workpiece length (max.): 800 mm, workpiece width (max.): 600 mm, number of support arms: 16, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with an optional support system and can therefore accommodate one large workpiece or a maximum of 16 smaller workpieces on the supports. TECHNICAL DETAILS Turbine power: 8 kW Workpiece size (single workpiece) max.: 800 x 600 mm Workpiece weight (single workpiece) max.: approx. 100 kg Number of positions in the support system: 16 Workpiece size (on support system) max.: 200 x 200 mm Workpiece weight (on support system) total max.: 150 kg Filter data Number of filter cartridges: 2 Total filter area: 20 m² Filter area per filter cartridge: 10 m² Air velocity: 1.25 m/min Compressed air data Dkodpfx Aezh Nf Aonzor Compressed air pressure: max. 4–5 bar Compressed air consumption: approx. 7 m³/h Compressed air connection: G 1″ Permissible negative pressure: max. 1,500 Pa Dust container: 20 l Residual dust content in the exhaust air: below 5 mg/m³ MACHINE DETAILS Control unit: Pulse/time: 24 V, 1 phase, 50 Hz Solenoid valves: Voltage: 24 V, 50 Hz Timer: Input/output voltage: 24 V, 50 Hz Operating hours: 2,288 h Fan data Air flow: 2,000 m³/h Static pressure: 1,800 Pa Total pressure: 2,000 Pa Power consumption: 2.2 kW Motor power: 1.1 kW Motor voltage: 400 V Motor frequency: 50 Hz Motor phases: 3 phases EQUIPMENT Filter cartridges with 10 m² filter area each Aluminum venturi tubes Solenoid valves, type CA 25 DD Timer CG 03.06/04 Filter group Pressure regulator Pressure gauge 1″ ball valve Dust container, 20 l Fan

Condition: as good as new (ex-display), Semiconductor protection Make Klöckner Moeller Type DIL SM 16 V-k 400 Volt 16 A 7,5 kw unused from stock Dodpfxjmxi U Se Anzokr

Condition: good (used), Year of construction: 1999, PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. With APV Rannie-High Press Pump Good condition, Not used last two years!. Year of Production: 1999. Dimension: L 4.000 MM Dedpfx Anohqhw Iezjkr W 1200 mm H 1900 mm Press: Medium pressure 20 bar Retentat flow: 1200 l/h

Condition: used, Year of construction: 1997, Micoflow insulator - Glovebox Glovebox insulator The device is unused. with microfilter extraction unit type 112108614A36, flow rate 1870 m³/h with 2 airlocks (for feeding and discharging work materials) Inlet/outlet size: W:400 x D:260 x H:430 mm ilumination 2x glove ports Castors (appliance can be moved) Front panel made of polycarbonate Interior dimensions: W:1200 x D:650 x H:100 mm Machine dimensions: W: 2100 x D: 850 x H: 2100 mm Weight: approx. 400 kg Dkodpfx Ansvw I Npozjr *

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Dkodpeu Nc Rijfx Anzsr Reference tool SK40 Milling head SEMPUCO *

Condition: new, For sale: a new, shock-absorbing ring roller for conveyor belts. This item comes from warehouse stock (new, unused), has not been installed, or put into operation. Technical data: • Type: shock-absorbing ring roller • Outer diameter: Ø180 mm • Overall length: 565 mm • Weight: approx. 27.75 kg • Steel construction • Rubber shock-absorbing rings • Bearing-mounted • Hexagonal shaft ends Application: • Conveyor belts • Mines • Gravel pits • Quarries • Cement plants • Recycling plants • Transport of bulk materials and aggregates Condition: • New – warehouse stock • Not used • May have minor signs of storage Dodpfx Anjzcq Ucjzskr • Visual condition as shown in the photos Included: • 1x shock-absorbing ring roller Ø180 mm L=565 mm The price is for 1 piece.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Technical Data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: Dodpfxeyv Ewmj Anzokr The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: excellent (used), Year of construction: 2020, operating hours: 5,200 h, functionality: fully functional, machine/vehicle number: OWD/381/2020, feed length X-axis: 5,200 mm, I have an Optymalizerka OWD-1600 Metal-technika machine for sale. It is a very good machine manufactured by a Polish company. The arm movement is driven by a servo motor, enabling very fast and precise cutting. The machine control is based on a Mitsubishi controller (one of the best in the world for machine control solutions). Year of manufacture: 2022. The machine was used as a backup, operating on average for half a shift per day. The machine is connected and ready for testing. Interested parties are welcome to come and see it. I can record videos or send more photos. Price is net. KEY FEATURES SPECIFICATIONS Electronics: Controller with a color touchscreen display "MITSUBISHI" Functions: - Full optimization of 30 dimensions in two quality classes. - Creation of cutting programs for different clients. - Cutting at a point marked with a fluorescent pencil. - Trimming the margin (beginning and end of the input material). - Cutting in batches (several elements at once). - Counters: meters, total, shift, operator, monthly. - Cutting accuracy: ±0.2 mm. - Ability to handle material up to 5.2 m in length. - Table with ejectors. Motor: 7.5 KW (saw Ø500 – 140 teeth) Input material width: 12 - 250 mm max. width/height (250 / 50 mm) Input material height: 20 - 120 mm max. height/width (140 / 120 mm) Input material length: up to 5,200 mm Lubrication: Oil-based central lubrication system Automation at the output: Connection for an inclined conveyor and sorting table. Dodpfx Anszhltvozekr

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: Djdpszgr Iqofx Anzskr This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: used, Year of construction: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm tool taper 2500 x 600 mm control 2000 kg tool magazin: SK40 rapid traverse HEIDENHAIN table-size 30 - 8000 U/min Dkedpfx Aneulnbkszer feed 45 m/min total power requirement 45 m/min workpiece weight max. 20 kW diameter of tools max. 10500 kg tool length - max. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor - Screen filter system with IKZ - Operating instructions Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 03-2018, For sale: perfectly preserved and fully operational semi-automatic flexo printing machine for corrugated board, manufactured by the renowned EMproject 89. Built in 2018, this machine is designed for reliable and precise 2-color printing on cardboard packaging. The machine is currently connected to power, fully functional, and ready for work. It is ideal for printing logos, barcodes, and graphics on shipping, industrial, or transport boxes in a single pass. Key Technical Specifications: Manufacturer: EMproject 89 (Serbia) Model: FLEXO PRINTER MS-1700/1400 Year of Manufacture: 03 / 2018 Number of Colors: 2 (Two-color printing) Maximum Cardboard Format: 1700 mm x 1400 mm Voltage: 220 V Dkedpfxszilvgs Anzjr Condition: Fully operational, well-maintained, testing possible before purchase. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Price is negotiable for serious buyers upon inspection. We also have other cardboard manufacturing equipment available printing machine (Flexo Printer EMproject 89), automatic paper slitting and rewinding machine YYS-I ( 2023), automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME ( 2024) and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are also available for sale.

Condition: excellent (used), Clamp holder make Comet FG IIII (28396) Dedpfx Ansmk E Uiozjkr for Comet threaded steel FG IIII TR 12

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) Dkodpfeyc H N Nex Anzsr • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: good (used), Year of construction: 1959, HESTIKA 22N Hand lever turret lathe Dkedpfsrm R Dujx Anzsr

Condition: new, For sale: High-quality steel compensating hose (Ringwellschlauch) made of stainless steel, designed for industrial applications. This component is used to compensate for vibrations, thermal expansions, and stresses in piping systems. Ideal for installations: - industrial - heating - gas - water - process/technological ⚙️ Technical data Type: SP20 Nominal diameter: DN100 Length: 1000 mm Pressure: PN10 Material: stainless steel 1.4404 (INOX) Standard: ISO 10380 / DIN 3384 Designation: BOA-MS (10/2022) Connections: pipe ends for welding Braid: reinforced stainless steel braid ✅ Advantages Dedsyzimvepfx Anzekr ✔ corrosion resistance ✔ high durability and flexibility ✔ vibration and noise damping ✔ compensation of thermal expansion ✔ industrial-grade product – robust construction

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: Dksdpfey Aagijx Anzsr ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: used, machine/vehicle number: V-17 1782, Jaw width: 103 mm Jaw height: 37 mm Spindle travel: 175 mm Swiveling range: 90° Dodpfxsdp S U Ns Anzekr Space requirement: 600 x 180 x 150 mm

Year of construction: 2017, condition: ready for operation (used), Belt length: 2900 mm Belt width: 360 mm Dkedpfxjdzx E Ue Anzer Belt speed infinitely adjustable Drive motor Table height adjustable by: +/- 500 mm Space requirement: 2000 x 600 x 650/700 mm

Condition: good (used), Delta New Poluclean P30 dust extraction system Delta New Poluclean P30 Dust extraction system 400 V 5,5 kW 3500 m³/h 95 liters weight: 361 kg Dimensions: HxWxD = 300 x 100 x 97 cm Djdeihfwpopfx Anzskr More extraction units in other sizes - new and used - you will find in our store! International shipping costs on request!

Year of construction: 1995, condition: like new (used), * Automatic flatbed die cutter Dksdpjkyt U Tjfx Anzjr * Very good condition. Cldsvexqcy * Possible to see in production. * Max size 1100x1600

Condition: good (used), Used in good condition 4 pieces in stock Dkedpfevt Szzsx Anzsr

Condition: good (used), Stainless steel tank 5000 L with mixer, cooling. In good condition Djdpfevr E N Nex Anzekr They have a built-in pipe around the tank that can cool

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card Dksdpfxowz Rifs Anzjr - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.