Used Koenig & Bauer Punching Machine for sale (65,135)

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - Hsdpfx Apoi Db Ibeyjnn in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Trumpf TruPunch 2020 Hnjdpfx Ajy S Adpepyjn

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Hsdpfx Aeza E S Dopyjnn

Condition: used, Year of construction: 2006, punching force: 30 t, overall weight: 18,000 kg, For sale is a Finn-Power LP 6 combined punching and laser cutting machine, manufactured in 2006. The machine is currently powered and ready for operation. An on-site inspection can be arranged at any time by appointment. We would be happy to demonstrate the machine in operation so that you can see its technical condition and functionality for yourself. The Finn-Power LP 6 combines punching and laser technology in one machine and is ideally suited for the efficient processing of sheet metal parts with high flexibility and productivity. The laser combination requires cleaning of the beam deflection mirrors; the laser source is operating cleanly. Manufacturer: Finn-Power Model: LP 6 Tool stations: 21 Year of manufacture: 2006 Siemens Sinumerik 840D control system CO₂ laser 2.5 kW Hsdpfxezb Rr Eo Apyonn Hydraulic punching technology with 300 kN punching force Multi-tool system Forming functions Automatic clamping positioning CE-compliant safety equipment Cooling system Extraction system Part conveyor belt Machine is powered Inspection and demonstration possible Immediately available upon agreement For further information, technical data or to arrange an inspection, please do not hesitate to contact us. Available from week 30.

Condition: like new (used), Year of construction: 2012, operating hours: 47 h, MACHINE WITH ONLY 47 working hours. Tested by ERMAKSAN FRANCE. COMPLETE DATA CAN BE FOUND IN DOCUMENTS Hodpfx Aporcb Hqsyonn FANUC CONTROL

Condition: used, Shearing/Punching Machine PEDDINGHAUS 210 SUPER 11 Throat depth: 305 mm Maxi punching capacity: 40 T Power: 3 kW Punching capacity: Ø 20 x 15 mm - Ø 90 x 5 mm (see abacus) Shearing capacities: (see abacus) Round shearing: Ø 34 mm Square shearing: 30 x 30 mm Angle shearing capacity: 100 x 10 mm 1 side for shearing/undercutting - 1 side for punching Delivered with some punches Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1800 mm Weight: approx 1,2 T Hjdpfx Ajzbrpropyenn

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 The positioning table is unfortunately defective; otherwise, the machine is in good used condition. Specifications: Punching force            70 t Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm or Rectangular             50 in 8.0 mm or Rectangular             60 in 7.0 mm or Rectangular             70 in 6.0 mm Hnsdpfx Aswrkcyepysn Projection                     750 with -Foot switch

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Table 3050 x 1550 mm Pressing force 220 kN Max. workpiece weight 280 kg Sinumerik 840 D Machine weight 17 t Hjdpozcd Hrsfx Apysnn Axes: X ... 6500 mm Y ... 310 mm Z ... 170 mm A1 ... n x 360 A2 ... n x 360

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm X-axis travel: 1250 x 2000 mm Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Positioning accuracy: +/- 0.1 mm Clamp opening: 11 mm Maximum strokes: 300 (1/min) Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg Hsdpfsy Dgrnjx Apyenn

Condition: like new (used), Year of construction: 2017, HYDRAULIC PUNCHING MACHINE FICEP MOD. SP 40 Good used in excellent conditions cCE. Power exerted: Ton 40 Maximum punching diameter on thickness: mm 32 x 10. Recess: mm 510 Working height: mm 955 Hodewm Emvjpfx Apyenn Stroke length (punch) from 0 up to mm 40 Net weight: kg 860 Dimensions: mm 1365 x 665 x 1700 (h) Motor power kw 4. Large hole device up to diameter 46mm included in the supply.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0164390271794, Offer 26137 Hydraulic combination flat bar shear with notching device and punch press Technical data: Hnjdpfxoy Uwu Ue Apyen - Flat bar shear - Blade length 360 mm - For flat material 350 x 13 mm - or 230 x 20 mm - Profile steel shear - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Round bar shear - Round steel 50 mm - Square steel 42 mm - Notching device - For material up to 12 mm - Right-hand notching up to 52 x 90 mm - Punch press - Punching force approx. 550 kN - Stroke, infinitely adjustable 0 - 60 mm - Punches holes in steel up to 30 mm diameter in 16 mm - Overhang 320 mm - Hydraulic drive 400 V / 5.5 kW - Two separate working cylinders and separate foot switches for each - Space requirement approx. W 1400 x H 1600 x D 750 mm - Weight approx. 1300 kg - Includes: - Various punches and dies in a separate tool cabinet - Support and stop table - Stop

Condition: used, functionality: fully functional, Combined profile shear (ironworker) for metalworking. Punches, cuts, notches, and severs structural steel (angles, flat bars, round bars, square bars) in a single machine. Robust East German/West German industrial design – extremely durable, easy to maintain, no high-tech frills. Features a large base plate and multiple workstations. Ideal for locksmiths, steel construction companies, metalworkers, blacksmiths, training workshops, or well-equipped hobbyists with sufficient space. A comparable new machine costs well over 15,000 EUR. Hnodpfx Aezabv Sjpyen Technical data: - Design: Combined profile shear with multiple stations (punching, shearing, notching, profiling) - Drive: Three-phase motor 400 V - Shear blades: included - Punching tools: included (see photo) - Steel base plate: cast, very stable - Machine weight: approx. 1,500 - 2,500 kg - Year of manufacture: approx. 1970s-1980s Collection / Transport: Self-collection with a heavy-duty forklift (>= 5 tons) or crane. Loading on site is possible. Shipping via a low-bed trailer is available by arrangement.

Condition: good (used), Year of construction: 2000, For sale is a used punching and bending center from Salvagnini. The S4 P4 is functional and ready for use. • Symmetrical bending unit Type: GPS Automatic device for precision bending • Programmable blank holder Hnsdpfxjh Dwqhj Apyjn Type: PB.U12 Consists of a device for automatically setting the length of the blank holder tool and a segment set for the blank holder tool • Panel delivery device/buffer SAP2220.POS Motorized roller table with dimensions of 3000 x 900 mm • Software Type: JOBS4P4.DIARIO Automatic batch size management (JOBS4P4), recording of data and movements of system components (DIARIO) • Control and management system Type: MMACHNT-MICROMach CPU processor: PENTIUM INTEL II 400 MHz Operating system: WINDOWS NT Subject to change/errors in technical specifications and subject to prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 2013, AVAILABLE FROM October 2026 Punching force: 220 kN Laser power in watts: 4000 Travel range - x: 2500 mm Travel range - y: 1250 mm Cutting capacity in structural steel: 8 mm Cutting capacity in stainless steel: 8 mm Cutting capacity in aluminum: 6 mm Workpiece weight: 280 kg Machine weight approx.: 24,000 kg Dimensions: 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Hnsdpfey Tm Dpex Apysn Operating hours: - Approx. 7,880 h Standard equipment: - Traveling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control etc.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head Hedpfxsy Saqgo Apyjnn - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: good (used), functionality: fully functional, Year of construction: 2019, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser hours: 980 h, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Machine - C-frame - Coordinate guide - Linear magazine with 25 stations for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning system with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot pedal for closing clamps - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation - Fine filtration of compressed air for beam tube ventilation - Closed beam guidance Cutting Head Hjdpfx Aoy Sappopyjnn - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level in the punching console - Stroke counter for punches - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control System - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote Support interface - Automatic shut-off with wake-up function - Production planner Functions - PlasmaLine Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Two-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Emergency stop for drives - Warp detection - Protection against stray radiation Extended Standard Equipment: - Network installation via Remote Support - Chiller (water-air) - Compact extraction system - 1st locating pin (inside right) - 2 finished parts containers - Chip container - 40 used RTC cassettes + die plate Punch Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread former breakage control - Marking/fast beading - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format detection - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Foot pedal start incl. rear-view mirror - Brush tables with loading and unloading support - Ejector unit for small parts - CO2 extinguishing system for compact extractor - Connection piece for exhaust air duct of compact extractor MobileControl App SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous loading and unloading during main time - Peeling system incl. positioning aid for oversize formats - Additional positioning aids for medium format - Additional positioning aids for large format - First add-on package with 9 suction cups (incl. vacuum ejector) - Unloading monitoring for laser parts - Loading of blanks GripMaster 4000 x 1500 mm SortMaster Pallet 4 pallets longitudinal ToolMaster Linear 54 stations with simultaneous tool setup during main time - Safety devices for warehouse connection incl. 2nd light barrier circuit - Warehouse interface

Condition: good (used), functionality: fully functional, Year of construction: 2013, laser power: 2,700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: Rexroth IndraMotion MTX (basic version) Laser power: 2700 Watt Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guide system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Maintenance-free three-phase drive motors - Repositioning unit with programmable hold-down device - Foot pedal for clamp closing - Alignment pin (right inside) - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for parts ejection - Two good parts containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - TruFlow 2000 laser with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control - Enclosed beam guidance - Fine filtration of compressed air for beam tube ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change system UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder Hnedpfsy Saqmex Apyon - Tool length compensation - Programmable hold-down device with manually adjustable holding force - Stroke counter for punch and thread-forming - Punch spray lubrication - Punch slug extraction - Measurement of fill level in punching console - Level monitoring for thread-forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Automatic shutdown incl. wake-up mode - Program management - Production scheduling Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light curtain - Monitoring system for gas pressure, temperature, and cooling water - Emergency stop - Protection against stray radiation - Compact extraction unit + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology functions: roll knurling, roll deburring, roll shearing, roll offsetting, roll bead forming, roll cutting + Die spray lubrication + Blow-off device for small parts + 1 pc. additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-damped installation + Repositioning cylinder + Warping detection + Parts conveyor belt in punching area + Parts conveyor belt in laser area + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser Hjdpfsy Samusx Apyenn - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer Hnjdpfx Aey Sat Uopyon - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: good (used), Year of construction: 2009, operating hours: 44,287 h, functionality: fully functional, X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 44,287 hours Control system: Bosch PNC-P Hedpfx Ajy Sathspyonn Standard equipment: Machine - Stable, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 18 tool positions including 2 clamps - Drives with maintenance-free three-phase motors - Reloading device with programmable hold-down device - Ball tables - Part chute 180 x 150 mm - Automatic shut-off Punching head - Hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down device - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming Control system - Open control system based on Bosch PNC-P - Control panel with 15" TFT color screen - Program management - Integrated Technology Data - Teleservice Data Transfer - USB Interface and Network Connection Safety - CE Marking - Multi-Beam Light Barriers - Hydraulic Quick Shutdown + Multitool Function + MultiShear Function + MultiBend Function + Thread Forming Function + Marking/Fast Beading Function + Deburring and Rolling Technology Function + Soft Punch Function + Movable Support Table + Part Slide Sensor + Vibration-Dampened Installation + 2nd Stop Pin + Bow Detection

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, operating hours: 13,817 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, punching force: 22 t, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,200 W Laser model: High-frequency excited CO2 laser TLF 3200W Press force: 22 t X-axis travel: 2,585 mm Y-axis travel: 1,280 mm MACHINE DETAILS Hsdpfx Aey Iz H Iopyonn Control system: Siemens Sinumerik 840 D Laser beam hours: 13,817 h Laser on hours: 71,637 h Operating hours: 80,188 h EQUIPMENT - Sturdy C-frame - Linear guide with integrated magazine - Maintenance-free three-phase servo motors - Programmable hold-down for repositioning - Sensor-monitored part chute 500x500 mm for punching and laser station - Ejector cylinder at the laser chute - Programmable cutting gas pressure control - Laser cutting head: 5'' lens, quick-change system, height control - Multi-beam light barriers - Quick shut-off hydraulics - Extraction system - Compact dust extractor - Protective device against stray radiation at the cutting head - Brush table - Sign function / rapid beading - Softpunch - Small parts blow-out device - Repositioning cylinder - Warp detection - Chip conveyor

Condition: used, Year of construction: 1993, sheet width 1550 mm plate length 2525 mm plate thickness 6,4 mm Hsdevh Ndpepfx Apyenn Punching capacity 200 kN speed of positioning X 50 m/min speed of positioning Y 50 m/mih no. of strokes 200 / 400 Hub/min control MNC 32000 ATC 22 Pos total power requirement 7,5 kW

Condition: good (used), Year of construction: 2004, Comm. no.: Lg 34522 high performance punching press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of construction 2004 (without sound insulation cabin) with - infinitely variable drive - 2 connecting rods power unit - pneum. Clutch-brake combination - stroke adjustment - screen control Siemens PC 670 - oil circulation lubrication Technical data Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 stroke 12 to 60 mm Installation height (max, stroke un U.T.) 320 mm column width 1.250 mm Table area 1.250 x 730 mm Drop-through opening in table 1,160 x 140 mm ram area 1.250 x 450 mm ram adjustment 60 mm Hsdpsip Uqmsfx Apyjnn Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Servo roll feeder VAMCO SP 150 Year of manufacture 2014 Passage width max. 150 mm Material thickness max. 3.0 mm

Condition: used, machine/vehicle number: 4131, Comm. no. Lg 34422 High performance automatic punching machine BRUDERER BSTA 60 H Hedpfjinzdlsx Apysnn from current production. Stroke adjustment has to be repaired. Without soundproof cabin and without conveyor system. Feed BBV 202/120

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Hnsdpey Szlxofx Apyon Strip infeed basket with strip guide Driven feed, lower roller driven Upper roller adjustable manually Internal lateral strip guides 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Strip outfeed basket Scrap conveyor Wheel displacement for transferring material from the machine line to rollers Protective covers with safety interlocks Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. It operated flawlessly in production at the customer's plant until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other applications.