Used Korrmann Trv 10-5 for sale (75,530)

Year of construction: 2020, condition: new, New - Soco Carton / Box Erector Ndodpfoyvutwsx Aazob Model F-100-5 Never installed Qty 2 available

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control Nedpfxsyug Hxj Aazodb enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Njdpfx Aezvp Uysazodb

Year of construction: 2015, condition: used, Used Machine Year of Manufacture: 2015 Features and Technical Specifications - Stationary piston compressor with 2 two-stage, two-cylinder, high-performance gray cast iron units designed for a long service life - Maximum flow rate: 2 x 960 l/min - Filling capacity: approx. 2 x 750 l/min - Maximum pressure: 10 bar - Tank capacity: 500 l Ndedpfxoz Ek Drj Aazsb - Motor power: 2 x 5.5 kW - Power supply: 400 V - Dimensions L x W x H: 2020 x 570 x 1340 mm - Sound pressure level at 1 m distance per DIN 45635: 83 dB(A) - With base load alternating control - 1st unit: 428 operating hours - 2nd unit: 418 operating hours

Condition: good (used), Year of construction: 2010, functionality: fully functional, Well-maintained and lightly used Gabbiani/SCM Galaxy 105 horizontal panel dividing saw. Ndsdsz Evm Sspfx Aazob Year of manufacture: 2010 Cutting width: 4,500 mm Fence depth: 4,100 mm Cutting height: 105 mm Saw blade: 380 mm The machine can be inspected while powered on.

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Ø23 x 33 mm, 81 pieces Nedpfxjyknlhj Aazodb Sizes: Ø 4/5/6/8/10/12 mm, see photos / parts list -Price/Fee: complete -Transport dimensions: 555/205/H190 mm -Weight: 15.2 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 9,584 h, pressing force: 153 t, total width: 1,700 mm, total height: 2,820 mm, overall weight: 11,000 kg, controller manufacturer: DELEM, controller model: DA-69T, product length (max.): 3,400 mm, number of axes: 4, This 4-axis PLACKE QPB-4 150/3100 was manufactured in 2001. It features a press force of 1500 kN and a bending length of 3100 mm, making it suitable for various bending applications. The machine includes a mechanical crowning system and comes with a comprehensive set of tooling and accessories. If you are looking to get high-quality bending capabilities, consider the PLACKE QPB-4 150/3100 press brake we have for sale. Contact us for further details. Ndodezm Unyjpfx Aazeb - Control System / Software: Delem DA-69T CNC Control (4 axes)- Operating Hours: 9,584.1 hours- Maximum Operating Pressure: 300 bar- Distance Between Uprights: 2600 mm- Ram Stroke: 215 mm- Installation Height: 525 mm- Throat Depth: 300 mm- Working Height (without table/tools): 900 mm- Rapid Advance Speed: 150 mm/s- Working Speed: 0 - 9.8 mm/s- Return Speed: 100 mm/s- Safety Speed: < 10 mm/s- Stopping Time: 0.15 s- Safety Distance: 270 mm- Ram Dwell Time: 0 - 9.9 s- Drive Power: 11 kW- Total Connected Load: 15 kW- Voltage / Frequency: 400 V / 50 Hz (3 PEN)- Control Voltage: 24 V DC- Current Rating: 30 A- Fuse Protection: 35 A- Hydraulic Tank Capacity: 270 L- Max. Oil Operating Temperature: 80 °C- Oil Filtration on Filling: < 25 µm- Sound Level: < 70 dB(A)- X-Axis Travel Range: 600 mm (Max speed: 400 mm/s, Accuracy: +/- 0.02 mm, Motor torque: 1.9 Nm)- R-Axis Travel Range: 200 mm (Max speed: 200 mm/s, Accuracy: +/- 0.05 mm, Motor torque: 1.9 Nm)- Z1-Z2-Z3-Z4 Axis Adjustment Range: 2400 mm (Manual adjustment)- Crowning System: Mechanical crowning system by Wila (0.6 kW, controlled via CNC)- Tool Clamping / System: Wila Modufix- Operating Ambient Temperature: +5 °C to +40 °C- Operating Humidity: 30% to 95% (non-condensing)- Included Accessories & Tooling:* Foot control panel* Technical documentation (1 set)* Sheet support arms: 2x 1m, 2x 0.5m* Punches (Upper Tools): 5x 515mm (28°, H200); 2x 100mm (28°, H200); 1x 200mm (28°, H200); 1x each 20mm, 30mm, 35mm, 40mm (28°, H200); 2x 100mm (28°, H200 with corner notch); 2x 255mm* Dies (Lower Tools): 5x 515mm (12x30°, R=1, H55); 6x segmented (12x30°, R=1, H55) [Total width 3m]; 4x 515mm; 1x 475mm; 8x segmented [Total width 3m]; 1x 515mm (50x80°, R=5, H55); 1x unspecified; 1x 200mm (V=8, 30°, R=1, H55)* Tool extensions: 1x 1240mm (H140, L410), 2x 50mm (H100), 4x custom-made (H100) Technical Specification Bending Length 3100 mm

Condition: good (used), Year of construction: 2014, Glass grinder BOVONE ELB 10-45 BEVELING MACHINE - BOVONE ELB 10-45 - GLASS THICKNESS UP TO 60 mm - WASHER + Brush ----- TECHNICAL DATA Speed: 0,35-5,4 m/min Glass thickness: 2-30 mm OPTION 60 mm Bevel: 0-45° Bevels: 5 mm max Min. glass dimension: 12 mm thick edge 65 x 65 mm bevel 22.5° 85 x 85 mm bevel 45° 105 x 105 mm Gr. 30 mm Njdpfxoulac Hs Aazsdb edge 80 x 80 mm bevel 22.5° 100 x 100 mm bevel 45° 140 x 140 mm Installed power: 31.5 kW Weight: 4950 kg Height of working panel: 920 mm Dimensions: length: 8200 mm width: 1200 mm H: 2900 mm Voltage: 24 V

Condition: excellent (used), Year of construction: 2015, Equipment: chip conveyor, documentation/manual, DMG ECOMILL 1035V machining center Year: 2015 In good condition Spindle bearing issue Njdpfjz Ehuhsx Aazedb

Year of construction: 2001, condition: ready for operation (used), Various lettershop and paper converting units are available. 1) MBO ET46 corner conveyor table, year of manufacture: 1991. 2) MBO ET46 corner conveyor table. 3) MBO Z2 knife folding unit. 4) Herzog + Heymann knife folding unit, year of manufacture: 2001. 5) MBO T45-2-X knife folding unit. 6) Böwe 310 Systec cutting module. 7) Nagel Citoborma 490 Vario SBT multi-spindle paper drilling machine. 8) Hunkeler paper unwind stand. 9) Herzog + Heymann shingle delivery, year of manufacture: 2001. 10) MBO FWIII 52/4 folding unit. 11) MBO T45-2-45/4 folding unit. 12) MBO FWIII 52/6 folding unit. 13) Hunkeler ARAW 50/20 paper unwind stand. 14) Böwe separating cutting module. 15) Herzog + Heymann 2-pocket folding unit, year of manufacture: 2006. 16) Herzog + Heymann 4-pocket folding unit, year of manufacture: 2001. An on-site inspection is possible. Nodpfxsziphas Aazjdb

Condition: used, Automatic start-stop shear manufactured by PROIN. It allows for cutting adjusted to the following specifications: - Strip width: 300 to 2050 mm - Material thickness: 2 – 10 mm - Tensile strength (Rm): maximum 600 MPa - Cutting length: 400 – 1200 mm The cutting speed varies depending on the strip's thickness: Nodpfx Aaoxdcylozedb - Thickness ≤ 5 mm: 36 m/min - Thickness ≥ 5 mm and ≤ 10 mm: 18 m/min Material width: 300 – 2.050 mm Material thickness: 2 - 10 mm Tensile strength (Rm): maximum 600 MPa Length: 400 – 12.000 mm

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Nedpfsyzylvsx Aazodb Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Condition: excellent (used), Year of construction: 2013, 4mm Dia. - 16mm Dia Range of Drilling; Up to 3,000mm Length of Component; Double Axis; Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Nodoy Ey E Repfx Aazjdb Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012);

Condition: used, Little used Silverson model GX10/1500 stainless steel multipurpose batch high shear mixer. Unit has general purpose disintegrated head. Unit direct driven with 7.5kW, 1470rpm motor. Includes Silverson model D/Lift hydraulic operated raise & lower mobile stand rated 300kgs safe working load. Ndedpfx Aoy Inr Rsazsb

Condition: excellent (used), Epson G10-854SR Robot Assembly Station, Dispensing Station The assembly station is divided into the sub-stations 3.1 Dispensing Area, 3.2 Assembly Area Cooler + End Plate, and 3.3 Front Assembly Area. (Cooler = Heat Sink, End Plate = End Plate Angle) St. 3.1: Dispensing Area - A WT (Work Tray) with attached chassis and circuit boards enters the dispensing area via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place. - The x-y-z handling system then moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling system moves over the rest position, and the WT is placed back onto the belt. - Further transport to the assembly area Cooler + End Plate (condition: no WT in the assembly position). St. 3.2: Assembly Area Cooler + End Plate - A WT from the dispensing area enters the assembly area Cooler + End Plate via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place, while the side walls of the chassis of the partially assembled unit are aligned. - Simultaneously, the cooler tray and end plate tray are positioned. - A stack of cooler trays (12) and a stack of end plate trays (12) are manually placed on the respective infeed belt outside the protective enclosure. - The two safety gates are opened, and the loaded tray stacks move into the gripping position of the respective stacker. - The two safety gates are closed again. - The respective grippers grasp the corresponding tray. - The z-axis separates the trays and transports them upwards (above the actual picking height). - A centering support is pushed and positioned under the respective tray using x-axis movement for centering and tray stabilization. Nedpfxoibx S Nj Aazjdb - The respective stacker's z-axis places the respective tray on the corresponding centering support. - The trays are ready for component removal. - The multi-gripper on the SCARA robot grips the cooler in the tray and places it in an intermediate position as an alignment aid (to compensate for inaccuracies when picking from the fixed gripping position for assembly). - The cooler is scanned, gripped again, and, if the scanner result is positive, mounted on the WT. - The non-conforming cooler is placed in a non-conforming box. - The multi-gripper on the SCARA robot then grips the end plate in the tray and places it in the alignment position. - The end plate is gripped again and mounted on the WT. - Continues with the front assembly area. Technical Data Design: SCARA (4-axis robot) Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation reach: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Pressing force: 250 N Weight: 48 kg Controller: EPSON RC180 Type of mounting: Ceiling IP protection class: IP20 Power and signal cable: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,936 h, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, overall weight: 14,334 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS VF-10/50 was manufactured in 2022. It features an impressive X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 3048 x 711 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 35.0 in (889 mm) • Spindle nose to table (min): 5.0 in (127 mm) • Spindle • Max torque: 340 ft‑lbf @ 700 rpm (460 Nm @ 700 rpm) • Drive system: 2‑speed gearbox • Bearing lubrication: Air/oil injection • Cooling: Liquid cooled • Table Ndodszh Hlaepfx Aazob • Length: 120.0 in (3048 mm) • Width: 28.0 in (711 mm) • T‑slot width: 0.626–0.630 in (15.90–16.00 mm) • T‑slot center distance: 4.92 in (125 mm) • Number of T‑slots: 5 • Max table load (evenly distributed): 4000 lb (1814 kg) • Feedrates • Max cutting feed: 360 ipm (9.1 m/min) • Rapids: X 360 ipm (9.1 m/min), Y 600 ipm (15.2 m/min), Z 600 ipm (15.2 m/min) • Axis motors (max thrust) • X: 3400 lbf (15,124 N) • Y: 4100 lbf (18,238 N) • Z: 5600 lbf (24,910 N) • Tool changer • Type: SMTC • Capacity: 30+1 • Max tool diameter (all pockets full): 4.0 in (102 mm) • Max tool diameter (adjacent pocket empty): 10.0 in (254 mm) • Max tool length (from gage line): 16 in (406 mm) • Max tool weight: 30 lb (13.6 kg) • Tool‑to‑tool (avg): 4.2 s • Chip‑to‑chip (avg): 6.3 s • General • Coolant capacity: 95 gal (360 L) • Air requirements • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Electrical • Drive system: 2‑speed gearbox • Input AC voltage (3‑phase) low: 220 VAC, 70 A (FLA) • Input AC voltage (3‑phase) high: 440 VAC, 35 A (FLA) • Dimensions – shipping • Domestic pallet: 288 in x 102 in x 132 in (732 cm x 260 cm x 336 cm) • Export crate: 288 in x 105 in x 134 in (732 cm x 267 cm x 339 cm) • Domestic pallet with EC option: 288 in x 102 in x 140 in (732 cm x 260 cm x 356 cm) • Export crate with EC option: 288 in x 105 in x 141 in (732 cm x 267 cm x 359 cm)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, punching force: 20 t, 1 Used Amada EM 2510 NT Servo Electric Cnc Punch Press For Sale Make: Amada Model: EM 2510 NT Punching Force: 20 Tons (200 kN). Axis Travel (X/Y): 2500 x 1270 mm (expandable for larger sheets) with reposition Turret Configuration: Typically 45-stations with 4 Auto-Index stations. Control System: touchscreen control. Positioning Accuracy: Servo-Electric Drive: Replaces hydraulic systems with a, single AC servo motor (AE) or twin-drive (EM) system. This reduces energy consumption, eliminates oil changes, and minimizes maintenance. Nsdpfx Aajyyck Sozsdb High Speed and Productivity: Capable of up to 900 hits per minute for marking, and 370 hits per minute on 1-inch centers. AMNC-F/3i Control: User-friendly, touchscreen interface for fast, error-free operations. Environmental Efficiency: The machine requires a low 19 kVA power hookup, drawing less than 5 kW at maximum power. Quiet Operation: Uses brush-type tables to reduce noise and prevent scratching on the underside of sheets. Tooling Efficiency: Features a "Triplet Track" turret and power vacuum die system to reduce tool changes and prevent slug pulling.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, BRITAS ABMF 1050 FILTER For plastic recycling Brand: BritAs Recycling Solutions Model: ABMF 1050 Melt filter with belt Fully automatic filtration with an intermediate melt accumulator Filtration area: 1050 cm² Storage volume: 12 liters Production capacity: up to 1500 kg/h Ndsdpoz Ebmqjfx Aazsb Year: 2017

Condition: good (used), Year of construction: 2019, Professional packaging machine from a renowned European manufacturer for adhesive tape widths up to 50 mm. Maximum carton dimensions approximately: width 525 mm x height 505 mm; length unlimited. This is a robust machine designed for the highest demands. - Double-sided sealing of cartons top and bottom with adhesive tape. - Transport speed up to approx. 20 m/min. - Various carton formats can be adjusted continuously in height and width via a quick-adjustment system (no hand crank required). - Working height adjustable from 635 to 950 mm. Special features/options: - Delivery includes an infeed conveyor approx. 1 m in length and an outfeed conveyor approx. 1 m in length. The outfeed conveyor is equipped with a stop plate, which can be removed if needed. Both roller conveyors are adjustable in height and inclination. - The machine has an adjustable sealing device for carton flaps at the infeed. - Machine speed is adjustable via a potentiometer. Nodpfxoyywazj Aazedb The machine can be demonstrated under power.

Condition: good (used), Year of construction: 2009, KUKA KR 210 L150-2 2000 6-Axis Robot The KUKA KR 210 L150-2 2000 (Series 2000) is a high-performance 6-axis industrial robot specifically designed for extended reach combined with a high payload capacity. The "L150" designation indicates the extended arm (Long version), which increases the maximum reach to 3,100 mm, while the rated payload is 150 kg. Key Technical Data Maximum reach: 3,100 mm Rated payload: 150 kg Supplementary load (arm/link arm): 50 kg / 100 kg Number of axes: 6 Repeatability: ± 0.06 mm Ndjdpfezcwxusx Aazsb Weight (excluding controller): approx. 1,285 kg Protection rating: IP65 (standard) Mounting position: Floor Axis Data (Motion Range & Speed) The Series 2000 features high-torque drives that ensure high dynamic performance despite the extended arm length: Axis 1 (A1): ±185° | Max. speed: 86°/s Axis 2 (A2): +90° to -61° | Max. speed: 84°/s Axis 3 (A3): +65° to -209° | Max. speed: 81°/s Axis 4 (A4): ±350° | Max. speed: 100°/s Axis 5 (A5): ±125° | Max. speed: 110°/s Axis 6 (A6): ±350° | Max. speed: 184°/s Typical applications Thanks to its large working envelope and load capacity, the manipulator is ideally suited for: Long-range material handling and palletizing tasks. Milling and machining applications (e.g., component trimming). Spot welding and handling in automotive production. Additive manufacturing and large-scale 3D printing. "A complete solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, clamping force: 1,800 kN, screw diameter: 55 mm, displacement volume: 510 cm³, mold height (min.): 300 mm, ejector force: 80,000 N, ejector stroke: 180 mm, total length: 6,200 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 12,900 kg, Clamping force: 180t Year of manufacture: 2014 Injection unit 1050 Screw diameter: 55 mm Specific injection pressure: 1615 bar Injection volume: 510 ccm Pump motor power: 30 kW Nsdpfez Eacwjx Aazsdb Cylinder heating band power: 16.3 kW Tool closing unit 1800 Clamping force: 180 t Tool plate dimensions: 880 x 830 mm Ejector force: 80 kN Ejector stroke: 180 mm Tool height: from 300 mm Opening stroke: 750 mm Maximum platen distance: 1050 mm Weight: 12900 kg Dimensions (m) L x W x H: 6.2 x 1.8 x 2.2 m Technical data: - Clamping force 1,800 kN (180 t) - Injection unit 1050, screw diameter 55 mm - Max. injection volume 510 cm³ - Injection pressure 1,615 bar, holding pressure up to 2,050 bar - Injection rate 255 cm³/s - Metering stroke 215 mm, max. screw speed 230 rpm - Opening stroke 750 mm, min. mold height 300 mm - Max. platen distance 1,050 mm - Mounting plates 880 x 830 mm - Max. mold weight 2,250 kg - Ejector: stroke 180 mm, force 80 kN - 6 mold cooling circuits at 10 l/min - Dry cycle time 2.0 s at 250 mm - Oil tank 540 l - Machine weight 12.9 t, dimensions 6.2 x 1.8 x 2.2 m

Condition: excellent (used), Year of construction: 2016, ABB IRB4400L-10 + IRC5 controller + TPU-Low DTC Nsdpfxozxbmaj Aazedb DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), Year of construction: 2017, operating hours: 2,742 h, functionality: fully functional, machine/vehicle number: MV0061-000661, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, controller manufacturer: Fanuc, workpiece length (max.): 800 mm, workpiece width (max.): 550 mm, workpiece height (max.): 460 mm, total height: 2,580 mm, total length: 3,260 mm, total width: 3,130 mm, table width: 570 mm, table height: 880 mm, table length: 860 mm, overall weight: 9,200 kg, distance table center to spindle nose: 720 mm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Doosan VC 510 (2017) – Vertical Machining Center with APC High-productivity 40-taper vertical machining center featuring a heavy-duty column-moving design and an integrated 2-pallet automatic pallet changer (APC). Nedpfoz Atqrsx Aazedb Key Specifications: Year: 2017 Control: Fanuc Travels (X / Y / Z): 762 × 516 × 570 mm Pallet Size (×2): 860 × 570 mm (Rotary APC, ~6 sec swap) Max Workpiece Size: 800 × 550 × 460 mm Max Table Load: 350 kg per pallet Spindle Motor: 18.5 / 15 kW Tool Changer (ATC): 30 Tools Rapid Traverse (X/Y/Z): 40 / 40 / 32 m/min Guideways: Heavy-duty Roller LM Guides Machine Weight: ~9,200 kg Excellent condition, fully maintained, and built for continuous high-speed production. Contact for inspection and further details.

Condition: used, functionality: fully functional, Year of construction: 1983, Hand-operated swiveling bending machine Manufacturer: FASTI, Type: 205, 1020 x 2 mm Year of manufacture: 1983 Ndedpoz Ah Apefx Aazjb Technical data Manufacturer: Fasti Type: 205 Year of manufacture: 1983 Usable length: 1020 mm Sheet thickness: 2 mm Stroke: approx. 200 mm Dimensions: approx. L 1.70 x W 0.50 x H 1.60 m Weight: approx. 750 kg Equipment - Swiveling upper die - Stroke approx. 200 mm - Various bending rails as shown in the photo All information is subject to change without notice. A demonstration can be arranged at our showroom at any time.

Condition: excellent (used), Year of construction: 2004, operating hours: 76,085 h, functionality: fully functional, machine/vehicle number: 196531, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 320 mm, displacement volume: 49 cm³, injection pressure: 2,240 bar, injection weight: 45 g, mold height (min.): 200 mm, ejector stroke: 125 mm, opening stroke: 350 mm, overall weight: 2,300 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 15 W, power: 19.9 kW (27.06 HP), Year of manufacture: 2004 Ndedpex Rq Rnjfx Aazeb Clamping force: 50 tons Distance between columns: 320 x 320 mm Screw diameter: 25 mm Injection volume: 49 ccm Injection weight: 45 g for PS Equipment: 2 x core pull, handling interface, interfaces for hot runner systems Fully inspected! PRICE REDUCED FROM 7000 TO 5950 EUR!!!