Used Kurtz Mfv (4920 X 1274/1000 X 1240Mm) for sale (64,191)

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Nwodsb A Iqvepfx Akcoi -Table surface: 260 x 1000 mm -T slots: 16 mm

Condition: used, Cast iron clamping cube 2 faces Length: 1000 mm Height: 600 mm Depth: 800 mm T-slots dimensions: 38 x 22 mm Nsdpfx Aezmw S Ijkcjwi Weight: approx 600 kg

Condition: used, Pair of cast iron angle plates Width: 1000 mm Height: 2075 mm Nsdpfx Akjzmw Rwscjwi Depth: 700 mm Unit weight: 1 T

Condition: used, Pair of cast iron angle plates Height: 3000 mm Width: 1000 mm Nwedpfxezmw I Nj Akcei Depth: 1245 mm Weight: 3 T / unit

Condition: excellent (used), Year of construction: 1995, overall weight: 4,000 kg, total height: 300 mm, total length: 4,500 mm, total width: 1,000 mm, T slotted bed plate STOLLE - 4500 x 1000 Cast iron floorplate 4500 x 1000 x 300 mm Floorplate Length: 4500mm Floorplate Width: 1000mm Height: 300mm No. Of T-slots: 4 Distance from T to T-slot / Jump:250mm T -slot size: 30mm Weight a plate approx.: 4000kg Number of matching pieces: 1 Length: 4500mm Njdpfozc If Ejx Akcswi Width: 1000mm Height: 300mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 14016, Rotor diameter: 530 mm Nwsdsyuz Dxopfx Akcsi Rotor width: 1000 mm Rotor knives: 4 x 2 Stator knives: 2 Feed opening approx. 700 x 1000 mm Drive motor: 90 kW

Condition: used, Year of construction: 1990, Year of manufacture: Nov 1990 Serial number: 1000 X 20 Nwodpsxwkrisfx Akcoi OLD TRAILER TIRES 1000 X 20 TRACTION.

Condition: good (used), Year of construction: 2006, Switch-on hours (date 18. May 2026): 28.970 h Technical details turning diameter 570 mm turning length 1000 mm control WEILER D3 swing diameter over slide rest 325 mm Swing in gap 600 mm length of gap 140 mm spindle bore 83 mm spindle diameter in front bearing 120 mm Njdjzcmccopfx Akcswi face stroke 340 mm longitudinal stroke 1100 mm workpiece weight max. 1200 kg spindle turning speed - stepless 1 - 2500 rpm transmission ratio 2 rapid travel - longitudinal/face 10 / 5 m/min main drive motor (60/100 % ED) 20 / 17 kW tailstock quill diameter 80 mm tailstock quill stroke 200 mm tailstock quill taper MT 5 weight of the machine ca. 3,8 t dimensions of the machine ca. 2,95 x 1,90 x 1,82 m * Control WEILER D3 * Chip conveyor * 4-station toolholder PARAT with several inserts * 3-jaw chuck SCHUNK ROTA-S plus 315-92

Condition: used, Year of construction: 1972, turning length / mm turning speeds / U/min centre height / mm LÖW Universal Lathe V 1000 Details of Model V 1000 Machine no. HO 1026 Nwedpfozcgi Nsx Akcji Centre height over flat track 500 mm Swing diameter over bed 1,000 mm Bed length 6,200 mm Turning length 4,000 mm Spindle bore 104 mm Face disc diameter 900 mm Max. workpiece weight between centres 5,000 kg max. workpiece weight with 1 vice 6,000 kg max. workpiece weight with 2 setting vices 7,100 kg incl. documentation

Condition: good (used), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm Here we offer a used workbench from the manufacturer Jung Heinrich for sale. The scope of delivery includes: 02x Workbench stands, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Nsdpfx Akjhm Stzscjwi Stand depth: 1,000 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 04x Workbench crossbeams, used Material color: orange Box profile: 85 x 40 mm Crossbeam type: GN85x41mm Clear width: 2,775 mm 08x Locking pins, used Design: fully galvanized 01x Chipboard, second choice, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,980 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 01x Chipboard, second choice, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,755 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 16x Drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images serve to illustrate the material. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: new, The vertical shelving system is a sophisticated storage solution for the upright storage of long goods such as roof battens, skirting boards, pipes, or beams. It was specially developed for both commercial and private use and offers a particularly space-saving alternative to traditional horizontal storage. Thanks to the vertical storage, only a minimal footprint is required – ideal for confined storage areas or self-service areas in retail. The scope of delivery includes: 1x Vertical Shelving System, new Shelf height: approx. 3,050 mm Shelf depth: approx. 1,000 mm Shelf length: approx. 2,360 mm Overhang: approx. 500 mm Your contact persons in our company: Njdewd Srmspfx Akcjwi Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: new, TC 180 x 1000 V Center distance: 1000 mm Center height: 178 mm Swing over bed: Ø 356 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2500 RPM Mechanical feed steps: 3 Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 - 1.96 mm/rev Cross feed X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Inch thread: (32) 4 - 56 TPI Module thread: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Tailstock spindle diameter: Ø 40 mm Tailstock spindle taper: MK 3 Tailstock quill travel: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Nwjdeir Imyspfx Akcei Dimensions, approx.: 1880 x 880 x 1390 mm Features: - Acceptance test report according to DIN - Precise, hardened, and ground guides - Robust headstock with oil circulation lubrication, precision-bearing spindle, gears hardened and ground for lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking system (V models) - Torsion-resistant machine beds made of MEEHANITE quality cast iron, stress-relieved by annealing and with multiple ribs for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gear - Pulse button for main spindle - CE / IEC as well as German documentation and German service Standard equipment (standard accessories): - Machine stand with splash guard back panel - 3-jaw chuck - 4-way tool post - Foot pedal with mechanical braking system - Coolant system - Chuck guard and spindle cover in accordance with European CE safety standards - 1 Fixed center for main spindle - 1 Fixed center MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Quick-change tool holder system Multifix also available as geared variants

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder Nwsdsvzmtzjpfx Akcji - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Nwjdjtv Iibspfx Akcsi Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, coolant device,

Condition: ready for operation (used), functionality: fully functional, Used impact crusher, Kleemann SDR 1000 x 230 mm, capacity 20 - 70 t/h, final grain size approx. 0/25 mm, maximum feed size 200 mm, weight approx. 9 tons. The crusher can be easily rotated by hand. Immediately available, subject to prior sale. Nwjdpfezhn Hxox Akcsi

Condition: excellent (used), Year of construction: 2008, Technical specifications: Turning diameter over bed: 1000 mm Turning diameter over cross slide: 680 mm Nwsdpszfvqmsfx Akcsi Center height: 500 mm Distance between centers: 4000 mm CNC control: FAGOR 8055T (new) Max. spindle speed: 0 - 1600 RPM Spindle bore diameter: 104 mm Spindle diameter: 150 mm Bed width: 550 mm Spindle nose: DIN 55026 / 11" Max. workpiece weight: 4,800 kg Rapid traverse rate X-axis: 8 m/min Rapid traverse rate Z-axis: 8 m/min Tailstock travel: 300 mm Tailstock quill diameter: 140 mm Motor power: 34.5 kW CE marking Dimensions (length x width x height): approx. 8250 x 3250 x 2950 mm Weight: approx. 10.5 tons Condition: Very good condition, only used sparingly The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are commensurate with its age; used machines are sold without any warranty. The stated prices are always net prices.

Condition: good (used), Year of construction: 1998, Manufacturer: Henninger Type: ZS-201 Year of manufacture: 1998 Self centerring device Double column slide ways Dressing Unit Tailstock by rack & pinion Eccentric adjustment 0 - 20 mm Large Cone-Stone tooling package Specifications Metric US Standard Minimum workpiece Ø 20 Ø Min. Maximum workpiece Ø 450 Ø Max. Max. product length 1200 mm Speed 18300 Rpm Max. grinding angle 45 - 120 ° Max. workpiece weight 190 Dimensions (estimate) Length 1250 mm Width 1250 mm Height 1900 mm Nodpfxsvt Tuij Akcowi Weight 365 kg Please note: The information on this page has been compiled to the best of our knowledge and belief by us and, where possible, by the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you review all important details.

Condition: good (used), overall weight: 2,800 kg, total length: 1,500 mm, total width: 1,000 mm, total height: 900 mm, Manufacturer: CORREA Type: Box Table Year of manufacture: 2006 Specifications Metric US Standard Number of T slots: 8 Pitch from T to T: 150 mm Nedpfxjwp Dn De Akcowi T dimension: 22 mm Number of T-slotted sides: 2 Dimensions (approx. estimate) Length: 1500 mm Width: 1000 mm Height: 900 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you verify all important details.

Condition: new, Year of construction: 2026, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Manufacturer: GERD WOLFF Website: Technical Details: • Length 1000 mm • Width 1000 mm • Height 200 mm • Weight 300 kg Nwedpfxey S D Naj Akcji • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Our welding tables are manufactured with HT 300 casting quality. All welding tables are also available in a nitrided version. • Plate thickness: 25mm All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum 665 mm. Nwodpfx Akoymf Tujcsi Thus, a working height of 820 - 865 mm is possible. Further details on the production and characteristics of our tables can be found in our catalogue. The illustrations do not correspond to the original size and are for llustration purposes only. 3D welding table - 3D clamping devices - 3D precision welding table

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Nsdpfx Aked I A Dhjcjwi Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm

Year of construction: 1971, condition: used, machine/vehicle number: 51, Color: yellow Force: 6,3 to Stroke: 1000 mm Weight: 3.300kg Nwjdpjbrclzefx Akcei

Condition: good (used), functionality: fully functional, working width: 1,040 mm, sheet thickness (max.): 4 mm, Counterweight in large protective housing Njdpozhgpxofx Akcowi

Condition: used, Year of construction: 2000, functionality: fully functional, 1x Used Bühler MDDL / MDDK Rollers are worn and can be re-grooved at an additional cost. Nwjdpfx Akjyudt Njcei Complete mill is already dismantled. Includes 4 drive motors. Spare parts can be supplied at extra cost.

Condition: good (used), 2 used T-slot angle plates Height: 1500 mm Width: 1000 mm Depth: 500 mm Nedpoy Iakfefx Akcewi 10 transverse slots 3 longitudinal slots First-class surface finish