Used Ldm Strip Leveller for sale (8,067)

Condition: excellent (used), Panel Saw HOLZ-HER 1255 SECTOR pro – used – • Welded frame with extremely high rigidity • Pneumatically retractable support grid • Sturdy saw carriage latching mechanism at top and bottom • Electrically monitored latching in vertical cutting mode • Foldable plunge lever on the saw unit • Retractable riving knife for cut-outs • Operator control panel at eye level • Digital display on longitudinal fence • Digital display for horizontal cut • Strip cutting device • Lift roller transport system • Trimmable support table • TRK extraction unit • Dust tested • Only used for 2 months ----- Technical Data ----- Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 60 mm Saw blade Ø: 250 mm Motor: 4 kW Extraction port Ø: 120 +100 mm Compressed air: 8 bar Year of manufacture: 2025 Quality info: - Complete basic inspection - Complete basic cleaning Fjdjy N Rihepfx Aggsgg - Ready for immediate use

Condition: used, mileage: 3,000 km, power: 125 kW (169.95 HP), color: white, gearing type: mechanical, number of seats: 5, Year of construction: 2026, Equipment: ABS, air conditioning, - In order to provide you with the best possible advice, we kindly ask you to arrange an appointment. Mr. Kiel will be pleased to assist you, Tel: Fjdsyy H Saepfx Aggegg A50 Front axle with increased load capacity, AR2 axle ratio i = 3.923, BA3 Active Brake Assist, C6L multifunction steering wheel, CB8 Stabilization Level II, CL1 steering wheel adjustable for tilt and height, CL2 leather steering wheel and leather gear lever, CW2 deletion of vehicle lowering function, D03 high roof, D93 deletion of partition wall, E07 hill start assist, E1D digital radio (DAB), E1U USB socket 5V, E3J switch panel pre-installation, E57 electrical wiring for trailer socket, E7B navigation pre-installation, E7M MBUX multimedia system, ED4 fleece battery 12 V 92 Ah, EE1 230 V power outlet, EK1 terminal strip for electrical connection, ES0 jump-start contact, ES5 instrument panel charging package, F61 interior mirror, F64 electrically folding exterior mirrors, F68 heated and electrically adjustable exterior mirrors, FF5 overhead storage above windscreen, FJ1 folding lid for storage compartment, FJ4 storage compartment under dashboard, FKA PANEL VAN, FM3 WET WIPER SYSTEM, GD8 6-speed manual ECO Gear 360 transmission, H00 hot air duct to passenger compartment, H12 auxiliary hot water heater, H16 driver seat heating, H21 heat-insulating glass with band filter on the windscreen, HH2 electric auxiliary air heater, HH9 SEMI-AUTOMATICALLY CONTROLLED AIR CONDITIONING TEMPMATIC, IL5 left-hand drive, IR6 wheelbase 4325 mm, rear overhang 1615 mm, IT4 3.5 ton class, J10 speedometer km/h, J55 seat belt warning for passenger seat, J58 seat belt warning for driver seat, J65 outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JB4 Active Lane Keeping Assist, JB7 Parking Package with reversing camera, JF1 rain sensor, JG0 shift point indicator, JH3 communication module (LTE) for digital services, JI7 maintenance interval start 60,000 km, JK5 instrument cluster with color display, JS2 intelligent speed assistant, JW8 ATTENTION ASSIST, KB7 main tank 93 liters, KP7 emission control SCR generation 4, L LEFT-HAND DRIVE, L13 fog lights with cornering light, L94 deletion of parking lights, LA2 driving light assistant, LB1 side marker lights, LB5 third brake light, LE1 adaptive brake light, LX5 Europe, M60 alternator 14 V / 250 A, M6B EMISSION CLASS EURO 6E-BIS N1, M72 vehicle suitable for HVO, MJ8 ECO start-stop function, MK2 speed limitation 130 km/h, MS1 cruise control, MU5 OM 654 DE 20 LA 125 kW (170 HP) 3800 rpm, P4F Euro-NCAP country package, Q11 longitudinal member reinforcement, Q67 rear towing eye, R65 spare wheel carrier at end of frame, R87 spare wheel, RY2 wireless tyre pressure monitoring on front and rear axle, RZ2 wheel manufacturer Magnetto Wheels, S04 adjustable passenger seat, S22 armrest for driver seat, S25 armrest for passenger seat, S87 low-profile seat base driver, SA5 driver airbag, SA6 passenger airbag, SB3 comfort suspension seat, driver, SK0 comfort headrest driver, SK2 seat occupancy recognition driver, T16 right-hand sliding door, T74 entry grab handle, T86 rear right pillar grab handle, U22 pre-installation for seating configuration 3/-/-, U65 passenger compartment seating 3-seater bench first row, V36 roof lining, V40 combi floor assembly, V43 wooden floor, VA1 standard load compartment paneling to belt line, VA7 storage compartment with net in rear doors, VF7 fabric Maturin black, W16 window front left fixed in side wall/sliding door, W17 window front

Condition: used, 1. Decoiler Brand : SCHLOEMANN Type : Hydraulic expanding decoiler Function : Coil holding and controlled rotation Expansion control : Hydraulic Frame : Welded steel base with integrated brake Estimated capacity : 8–12 tons Coil bore : Ø 508 mm ----- 🔹 2. Straightener / Pinch Roll Manufacturer : COMEC (Société de Constructions Mécaniques de Creil) Type : Pinch roll and leveler Control : Mechanical Order number : 1305.1268 Recommended lubricants : Shell Macoma, Tellus, Alvania (as per nameplate) Function : Feeds and flattens strip before slitting Secondary role : Synchronized strip puller ----- 🔹 3. Slitter Manufacturer : COMEC Type : Circular blade slitting machine Drive : Mechanical gear train Blade adjustment : Manual Blades installed : ~10 sets (visible) Function : Longitudinal slitting of metal sheets into narrow strips ----- 🔹 4. Shear (End Cropper) Manufacturer : COMEC STAMCO Type : Rotating or inline shear Function : End cropping or final length cut Fgsdpfx Aow Dd Igoggeg Control panel : Electromechanical (visible on photo) Machine Application Complete line for metal coil slitting, producing narrow strips from master coils, with upstream flattening and final end cutting. Features / Differences – Heavy-duty hydraulic decoiler by SCHLOEMANN – Mechanical straightening section from COMEC – Manual-adjust slitter with circular blades – Outfeed shear for end trimming or final cut-to-length – Older but industrial-grade line, suited for medium gauge materials

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, FAM CHD-3D | Meat Dicing Machine Manufacturer: FAM n.v. Model/Type: CHD-3D Serial number: 6238 Year of manufacture: 2005 Power supply: 400 V, 3 phases, 50 Hz Power: 7.5 kW Blade spacing: 4 mm and 20 mm Dimensions: 1350 x 1700 x 1900 mm Machine weight: 475 kg Rotational speeds: Impeller wheel (drum) max. 150 rpm, Circular blade shaft max. 850 rpm, Chopping blade shaft max. 1800 rpm Fsdpfxszhgvrs Aggsgg Control enclosure: Rittal Type: AE 1008 Cabinet serial number: 127088 The professional industrial dicing machine FAM CHD-3D is an extremely efficient and versatile three-dimensional slicing machine, designed for continuous operation in the demanding conditions of the food industry. The machine is ideal for large meat processing plants. Its special design allows for the processing of even very large products without the need for pre-cutting, which significantly shortens the entire process time. The machine's operating mechanism is based on an advanced, three-stage cutting system. The product fed into the rotating drum (impeller wheel) is stabilized and first cut into slices by centrifugal force, then divided into strips by a system of circular blades, and finally, a precise shaft with chopping blades performs the final cut into perfect cubes. This technology guarantees perfect geometry and consistent slicing, minimizing waste and the formation of "ragged" edges. The entire construction of the machine is made of high-quality stainless steel, ensuring maximum resistance to aggressive cleaning agents and moisture. The heart of the drive is a powerful 7.5 kW motor, which easily handles hard raw materials, guaranteeing a performance level of up to 3000 kg/h (depending on the type and size of the raw material). This is a reliable investment for companies aiming to automate production lines and raise quality standards.

Condition: excellent (used), Panel Saw ELCON ADVANCE 215 DSX-A - used - Fgjdpfx Ageyq Rwyogeg Automatic clamp system for trimming the lower edge, Pneumatically retractable support grid, Sturdy locking positions for the saw carriage at the top and bottom, Electrically monitored locking for vertical cuts, Retractable riving knife for cut-outs, Control panel positioned at eye level, Digital display at the longitudinal stop, Digital display for horizontal cuts, Scoring saw unit with counter-rotation, TRK extraction system, Certified dust extraction, Strip cutting device ----- Technical Data ----- Cutting length: 6,300 mm, Cutting height: 2,100 mm, Edging height: 2,000 mm, Cutting depth: 80 mm, Saw blade Ø: 300 mm, Motor: 4 kW, Extraction port Ø: 200 mm, Compressed air: 6-8 bar, Required space (LxWxH): 7,700x2,000x3,000 mm Quality Information: - Guide rails renewed - Complete basic inspection - Thorough cleaning - Electrical system checked - Immediately ready for operation

Condition: new, Year of construction: 2025, warranty duration: 12 months, total width: 1,900 mm, total length: 1,800 mm, total height: 1,550 mm, SPRAY STRIPPING MACHINE – TECHNICAL SPECIFICATION 1. EXTERNAL DIMENSIONS Width: 1 800 mm Length: 1 900 mm Height: 1 600 mm 2. WORKING DIMENSIONS Width: 1 300 mm Length: 1 300 mm Height: 670 mm* 3. TECHNICAL CHARACTERISTICS Total power: 9.2 kW Heating power: 7.0 kW Pump power: 2.2 kW Number of nozzles: 24 Fluid flow rate: 320 l/min Operating pressure: 4.5 bar Operating temperature: 85°C Construction material: AISI 316 (1.4401) acid-resistant stainless steel 4. TANK CAPACITY & HEATING SYSTEM Indirect heating medium: 167 l (±2%) Main tank capacity (stripping fluid): 480 l (±2%) Heating system: indirect heating jacket, separately controlled 5. MACHINE CONSTRUCTION Machine tank equipped with 4 adjustable legs for levelling. Control panel mounted on the machine base. Equipped with an industrial CLICK-CLACK quick-release connector. 6. CONTROL SYSTEM 2 × temperature controllers: One for the heating jacket One for the main processing tank Process time controller LED indicator lights for monitoring correct process operation. 7. DEVICE CAPACITY Suitable for 4–8 rims up to 23”. 8. PLATFORM GRATE Made entirely of acid-resistant stainless steel AISI 316 (1.4401). Serves as a durable, chemically resistant working area for placing rims or other items to be stripped. 9. ROTATING NOZZLE SYSTEM 2 Rotating Arms The machine features two rotating arms, each equipped with a section of the 24 specially engineered nozzles. Nozzles provide multidirectional, high-pressure spraying for fast and uniform paint removal. Designed for maximum coverage, including internal and hard-to-reach areas of the rim. 10. APPLICATION Spray stripping machines represent a modern and highly efficient method of removing paint from alloy wheels. Their use is increasingly appreciated in automotive workshops, tyre services and professional rim refurbishment facilities. Using this machine significantly improves working comfort by providing perfectly cleaned surfaces, allowing all further service operations to be performed faster and with higher precision. 11. KEY BENEFITS Ideal for rim refurbishment centres, tyre services and automotive workshops. Perfect stripping results thanks to counter-rotating spray nozzles. Fodpfx Agjghl Dzegegg Extends the service life of other tools and machines due to improved pre-cleaning. Optimises employee working time and increases process efficiency. Ensures consistent, precise and repeatable stripping performance.

Condition: used, first registration: 04/2025, Year of construction: 2025, Equipment: ABS, Kögel MEGA S24 MEGA, lift axle on the 1st axle, lifting roof, Vario Loch-FIX frame, BPW axles, pallet stop strips left and right, sliding curtain sides, sliding roof cover, toolbox, 1st owner, as new condition. Permissible kingpin load: 12,000 kg Technical possible kingpin load: approx. 12,000 kg Permissible axle load: 24,000 kg (8,000 kg per axle) Technical possible axle load: approx. 27,000 kg (9,000 kg per axle) Permissible total weight: 36,000 kg Technical possible total weight: approx. 39,000 kg Unladen weight, basic equipment: approx. 6,130 kg Unladen weight, individual configuration: approx. 6,582 kg Theoretical payload: approx. 29,418 kg Floor load capacity according to DIN EN 283 with test axle load 7,200 kg (A) Wheelbase: approx. 6,390 mm (A1) Axle spacing: approx. 1,310 mm (A2) Axle spacing: approx. 1,310 mm (D) Overall length: approx. 13,950 mm (E) Overall width: approx. 2,550 mm (F) Internal loading length: approx. 13,620 mm (G) Internal loading width: approx. 2,480 mm (G2) Rear through-loading width: approx. 2,480 mm Tire size: 445/45R19.5 (H1) Loading height unladen, driving position level: approx. 1,020 mm (H2) Loading height laden, driving position level: approx. 990 mm (H3) Achievable dock height at rear with kingpin height 910 mm, loaded, raised: approx. 1,200 mm Ride height set to 265 mm. (K) Side through-loading height, internal: front approx. 2,735 mm - 2,860 mm [adjustable by 5x25 mm], rear approx. 2,810 - 2,860 mm [adjustable by 1x50 mm] (K1) Height under roof, internal: front approx. 2,875 mm - 3,000 mm [adjustable by 5x25 mm] | rear approx. 2,950 mm - 3,000 mm [adjustable by 1x50 mm] (X1) Overall height unladen, driving position level: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment (X2) Overall height laden, driving position level: = H2 + K + T +/- body height adjustment Fgjdpszxiyuofx Aggsg Superstructure settings: The “Mega” superstructure design allows a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, lateral through-loading height, internal height) change accordingly depending on the selected body setting. (T) Roof construction height, side: approx. 180 mm. Due to the design of the roof beam, the internal pallet-width height corresponds to the specified internal height under the roof. (N) Front overhang (according to ISO 1726): approx. 1,685 mm (N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm (O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm (P) Construction height above king pin: approx. 90 mm (S) Possible kingpin height unladen: approx. 930 - 1,060 mm, horizontal at approx. 930 mm (Pay attention to overall height!) Braking system in accordance with ECE-R13 Electrical system in accordance with ECE-R48 Wabco brakes, air suspension BPW triple-axle assembly ECO Air with disc brakes Ø 370 mm, ET 120, 260 mm air suspension stroke. 6 x 445/45 R 19.5 tires Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in the direction of travel Vario Fix steel-perforated outer frame with 3 pairs of stanchion sockets Mechanical/hydraulic lift mechanism, lift height from lowest position approx. 500 mm/600 mm, 4 operating levers at each corner stanchion. Complies with safety regulations according to BGV D 29. (Lifting roof can only be operated with doors open!) Load securing certificate according to EN 12642 XL (VDI 2700). Road transport only. "Daimler load securing DL 9.5" certificate

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Fgjdezhnlzopfx Aggsg Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, functionality: fully functional, Equipment: documentation/manual, 2021 Star SR32 JII Type A (15,000 hours) 4m FMB Turbo 3-36, Hydrajet UB20 High Pressure Coolant, LNS Swarf Conveyor, FireTrace Suppression, JBS Guide Bush System, Fully inspected & serviced, 30 Day Warranty # Star SR-32JII CNC Sliding Head Lathe Machine Hours: Approx. 15,000 hours Maximum Machining Diameter: Ø32 mm standard / Ø34 mm optional CNC Control: Fanuc 32i-B ## Machine Configuration * Twin-spindle CNC sliding head lathe * Main spindle and sub-spindle * Main and sub-spindle full C-axis control * Gang-type tooling system * Cross-working driven tooling * Back-working tooling * X1, Y1, Z1, C1, X2, Z2 and C2 controlled axes * Type B configuration additionally incorporates Y2 control on the back-working unit ## Main Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 7.5 kW continuous / 11 kW short-time rating * Maximum headstock stroke: 320 mm * Full C-axis contouring capability ## Sub-Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 3.7 kW continuous / 5.5 kW short-time rating * Full C-axis contouring capability * Maximum chucking diameter: Ø32 mm / Ø34 mm optional ## Main Tooling * 6 × turning tool positions * Tool size: 16 mm square * 5-spindle sleeve holder * Maximum drilling capacity: Ø13 mm * Maximum tapping capacity: M12 × P1.75 ## Cross-Working / Driven Tooling Configuration options include: * 3 × ER20 cross-milling positions + 2 cartridge-type positions * Or 6 × ER16 cross-milling positions * Maximum milling capacity: Ø10 mm * Maximum driven tapping capacity: M8 × P1.25 * Cross-milling spindle speed: 6,000 rpm * Cartridge-type driven tooling speed: up to 8,000 rpm * Driven-tool motor: 2.2 kW continuous / 3.0 kW short-time rating ## Back-Working * Maximum chucking diameter: Ø32 mm / Ø34 mm optional * Maximum front ejection length: 125 mm * Maximum projecting component length: 45 mm * Back-working tool positions: * 6 positions – Type A * 8 positions – Type B * Stationary drilling capacity: Ø13 mm * Driven drilling capacity: Ø8 mm * Stationary tapping capacity: M10 × P1.5 * Driven tapping capacity: M6 × P1.0 * Maximum back-working driven-tool speed: 6,000 rpm ## Rapid Traverse * X1 / X2 / Y1 / Z1 / Z2: 35 m/min * Y2: 24 m/min on applicable Type B machines ## Ancillary Equipment Included * 4 metre FMB Turbo 3-36 Magazine Bar Feeder * Hydrajet UB20 High-Pressure Coolant System * LNS Swarf Conveyor * FireTrace Automatic Fire Suppression System * JBS Guide Bush System ## Machine Condition & Support * Approx. 15,000 operating hours * Fully inspected and serviced * Supplied ready for production Fgjdpfozuxfrsx Aggog * 30 Day Warranty * Warranty valid within the UK only ## General Specification * Coolant tank capacity: 255 litres * Approximate machine dimensions: 2,690 × 1,345 × 1,780 mm * Approximate machine weight: 4,100 kg * Power requirement: 8.8 kVA * Maximum sound pressure level: 77 dB

Condition: excellent (used), Panel Saw HOLZ-HER 1255 -used- Welded frame with extremely high rigidity, pneumatically retracting shifting grid, stable latching of the saw carriage at both top and bottom, Fgsdpfx Agjyyzp Hogsg latch monitoring in vertical cut electrically controlled, foldable plunge lever on the saw unit, retractable riving knife for cut-outs, operator panel at eye level, digital display on the longitudinal fence, digital display for horizontal cut, strip cutting device, roller lift transport system, trim-capable support surface, dust extraction device TRK, dust-tested. ----- Technical Data ----- Cutting length: 5200 mm, Cutting height: 2200 mm, Trimming height: 2100 mm, Cutting depth: 60 mm, Minimum height on folding rail: 120 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Extraction port Ø: 120/100 mm, Compressed air: 6 bar, Required space (LxWxH): 6500x1650x3050 mm, Weight: 900 kg Quality Information: - Fence strips replaced / refurbished - Comprehensive basic inspection - Complete basic cleaning - Electrical system checked - Immediately operational

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Fgsdpfszhn Rqex Aggjg Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, material width 250 mm material thickness 2 - 4 mm no. of straightening rolls 7 run-in height 1250 mm mm strip intake tiltable, positiv 25 ° strip intake tiltable, negativ 30 ° total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. m Leveler was dismantled, checked and then repainted Fgedogbl Aaspfx Aggeg

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. Fsdpfx Agjyx Uy Aogegg • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: used, mileage: 223,050 km, power: 110 kW (149.56 HP), first registration: 07/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,331 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 3454 ----Why autonext? Over 400 cars & commercial vehicles available immediately. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options available. Full vehicle range available at autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99 % ### ----Get a clear impression now: Watch the video via the YouTube link to see the vehicle completely, inside and out: Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively at Mercedes Benz Next service in 492 days Deep-freeze van Refrigeration unit: Carrier Viento INT 350 (-20°) Refrigerant: R-452A Optionally, we offer a refrigeration maintenance service from the manufacturer for only €899. Multimedia system MBUX (7" touchscreen) Parking package with 360° camera Blind spot assistant Active brake assist Active lane keeping assist Cruise control Regulated air conditioning (Tempmatik) Heated seats Comfort suspension seat Sliding door assist Thermal curtain for rear door and sliding door Fgjdpfx Agezzug Ssgsg Upon request, we offer a trailer coupling retrofit for only €599, and if possible, an increase in the trailer load to up to 3.5 tons. ---- Special equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * Parking package with 360° camera * 360-degree camera system * Airbag passenger side * Exterior mirrors, electrically foldable * Exterior mirrors with blind spot assist * DAB tuner (digital radio reception) * Entry handle on rear pillar, rear right * Driver assistance system: active brake assist * Driver assistance system: active lane keeping assist * Tachograph operation at the front under the headliner * Digital tachograph * Suspension: stabilization level I * Cruise control * Rear door (opening angle 270 degrees) * Connection strip for electrical connections (driver's seat box) * Regulated air conditioning (Tempmatik) * Cable duct on rear portal * Cable duct on side wall * Marker lights, side * Engine drive front with carrier for additional coolant compressor * Tire pressure monitoring system * Windshield wipers with rain sensor * Seats in the driver's cab: double passenger seat * Seats in the driver's cab: heated driver's seat * Seats in the driver's cab: comfort suspension seat, driver's side * Seats in the driver's cab: driver's seat box, low * Rear door step * Heat-insulating glazing (windshield with band filter at the top) * Sliding door assist, right Standard equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard passenger side, adaptive brake light, airbag driver side, anti-lock braking system (ABS), anti-slip regulation (ASR), drive type: rear-wheel drive, display for washer fluid level, exterior mirrors, electrically adjustable and heated, both, exterior temperature display, automatic switch-on of headlights, entry handle for sliding door at cargo area partition, electronic brake force distribution (EBV), electronic stability program (ESP), driver assistance system: breakdown management, driver assistance system: crosswind assist, electric windows 2-way, noise reduction measures, exterior, transmission 6-speed - TSG (Eco Gear), body/structure

Condition: used, Year of construction: 2013, operating hours: 4,867 h, functionality: fully functional, Equipment: Basic model DW 3060-C “Büffel” Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. ABS and lighting according to EC directive 50 mm EC drawbar coupling incl. adapter shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the side) Permissible total weight 25,000 kg Tires 385/65 R22.5 Mercedes-Benz diesel engine OM460LA, 315 kW at 2,000 rpm, meets exhaust emission standard EUROMOT IIIB Additional hydraulic connections 20 l and 70 l/min. (using a variable pump) Hydraulic preparation for comb basket system and drive mechanism Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pieces) and comb (22 pieces) - form C (174 mm, armored) Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control system Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint finish: 2-component paint RAL2011 deep orange Additional equipment: BioPower package - Engine output: 360 kW, with reinforced planetary gearbox Fgedezn Icyopfx Aggjg - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 form C armored (42 pieces) - Comb basket system with fine strip basket - Transmission oil cooler Hydraulic drive mechanism Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system Funnel attachment plates foldable on both sides Delivery date will be agreed upon.

Condition: used, maximum load weight: 32,320 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2019, Equipment: ABS, Vehicle Description: Kögel S24-1 Cargo, Lifting Axle, BPW ECO Axles Air Compact, Edscha sliding roof, side curtains, mounted on both sides: Steel pallet stop strips with VarioFix hole pattern (bolted), VarioFix slotted frame, on both left and right sides in the direction of travel, for internal width 2,468 mm (loading height under outer rail is reduced by approx. 20 mm). Axle lift mechanism on axle 1, fully automatic, load-dependent axle lift control. Start assist: activation by pressing the brakes three times, 30% overload allowed up to a speed of 25 km/h. Plastic toolboxes EBS system 2S/2M with stability control program (includes ABS/ALB function). IDEM Telematics System BasicTrailer incl. GPS location monitoring, coupling status, EBS data. - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". Technical Data: Permissible total weight: approx. 39,000 kg Basic equipment unladen weight: approx. 5,920 kg Unladen weight of customized vehicle configuration: approx. 6,333 kg Bed length (internal): approx. 13,620 mm Bed width (internal): approx. 2,480 mm Rear through-loading width: approx. 2,480 mm Loading height unladen, level travel position: approx. 1,220 mm Loading height laden, level travel position: approx. 1,190 mm Vehicle height set at 290 mm Side through-loading height (internal): approx. 2,680 mm Height under roof (internal): approx. 2,760 mm Front overhang (ISO 1726): approx. 1,685 mm Front overhang radius (ISO 1726): approx. 2,040 mm Rear swing radius (contrary to ISO 1726): approx. 2,100 mm Fifth wheel coupling height: approx. 1,130–1,190 mm Fjdpfezxizxsx Aggegg Chassis: Axle lift mechanism on axle 1, fully automatic and load-dependent. Start assist via triple brake actuation, 30% overload up to 25 km/h. BPW ECO Axles Air Compact assembly with disc brakes Ø 430 mm, ET 120. Air suspension with 180 mm lift. Tyres: 6 x 385/65 R 22.5 tyres, 160J (European brand of Kögel's choice). Steel rims 22.5 x 11.75, offset 120 mm (ET 120). Tarp: Tarp rope with two holders on the front wall Sliding tarp, quality approx. 900g/m², with over-center tensioning system, according to DAIMLER cargo securing standard (DL 9.5). Documents: - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". TECHNICAL DETAILS Gross weight: 39,000 kg Unladen weight: 6,330 kg Max payload: 32,670 kg Axle configuration: 3 Wheelbase: 6,390 mm Loading length: 13,620 mm Loading width: 2,480 mm Loading height: 2,710 mm First registration: 03/2019 Suspension: Air Color: Silver Tire size: 385/65R22.5 Features: ABS, EBS, Telematics A complete equipment list is available on request. Despite utmost care, errors in this advert cannot be excluded. Subject to prior sale and errors. Please request more information.

Condition: used, Year of construction: 2017, operating hours: 10,400 h, Equipment: Basic version DW 3060-F "Buffalo" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EU directive 50 mm EU towing eye incl. adaptor shoe Hydraulically adjustable support leg Splash protection (mudguards inside and on the sides) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with emission standard EUROMOT IV Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fgodpfx Asyu Srmeggjg Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) - Size L (174 mm, armoured) Rear conveyor belt: length 5,500 mm, width 1,200 mm, hydraulically foldable, with anti-magnetic central section Longitudinal conveyor belt: length 3,300 mm, width 1,000 mm Centrally positioned wear strips 24 V electric control Roller reversing via electric motor when engine is off automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic travel drive Radio remote control Attachment for comb extension Limiter Size “L” Comb extension Size "L" Limiter Wetting system Removable hopper extension plates on both sides Delivery date by arrangement

Condition: as good as new (ex-display), functionality: fully functional, Affordable CNC technology is becoming increasingly important, especially for versatile craft businesses. Whether standard products or individually designed one-offs, the all-purpose Format4 CNC machining center profit H200R produces both single pieces and large series with maximum efficiency and delivers immediate value from day one. With its newly redesigned appearance, the profit CNC machining centers from Format4 convey dynamism, power, and the latest high-end technology at first glance. The new machine frame with massive steel ribbing guarantees maximum stability during peak performance. With a wide selection of various tool changers and perfectly integrated Format4 software, the new FORMAT4 CNC machining center is a reliable complete package for the production of doors, windows, stairs, and solid wood furniture starting from batch size 1. Optional Equipment C15 Enclosed drag-chain for cable management in X and Y axis C29 Mobile operator terminal instead of fixed terminal C42 Safety system with pressure-sensitive mats incl. pendulum mode C58 Monitoring of stop cylinders for 6 workpiece supports C70 Continuous stop rail in the Y direction, 2 pcs. C81 Preparation for 0–360° C-axis C85 Tool changer with 12 tool positions on the left C98 Optical machine status indicator C99 Blue LED light strip C101 Vacuum suction cup FA 125 x 75 x 100 mm C103 Vacuum suction cup FA 140 x 115 x 100 mm C135 6 workpiece supports instead of 4 424 F4Integrate – Lamello Clamex P macro module C490 F4design (incl. 3-axis post processor) C601 F4Design initial equipment bonus 800 E-learning F4Design Machining Area H200 13.33 Axis Travel Range X = 4000 mm Y = 1670 mm Z = 500 mm Working Area X = 3300 mm Y = 1280 mm Z = 250 mm clearance height from the console level, depending on clamping system (see layout) Axis Positioning Speeds Depend on the selected safety system (refer to layout for details). Fodpfjwztuqex Aggsgg Equipped With High-performance PC 24" LED color display Keyboard, mouse, and mousepad 1 USB interface Including delivery and setup in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89 Including 3 days of software training in Leutkirch

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 1,600 rpm, travel distance X-axis: 368 mm, travel distance Z-axis: 2,900 mm, total height: 1,925 mm, total width: 1,525 mm, overall weight: 3,820 kg, product length (max.): 5,278 mm, number of axes: 2, Horizontal turning machine manufactured in 2022. This Optimum OptiTurn TH 8030D features a maximum swing diameter of 800 mm and a turning length of 250 mm. It includes a robust spindle chuck and a rapid motion speed of 3800 mm/min. If you are looking to get high-quality turning capabilities, consider the Optimum OptiTurn TH 8030D machine we have for sale. Contact us for further details regarding this machine. • Type and highlights • Leading and traction spindle lathe, high flexibility, precision and cost-effectiveness • With digital position indicator prepared (see Additional equipment) and quick-change steel holder (see Additional equipment) • Shipping information • Packaging metrics: Length 4770 mm, Width 1150 mm, Height 1840 mm • Weights: Gross 4480 kg, Net 3870 kg • Technical data • Load bearing capacity 1,4 t/m • Work areas: • Max. height 400 mm • Swing diameter above machine bed 800 mm • Swing diameter above planing slide 570 mm • Bed width 400 m • Max. width 3050 mm • Swing diameter in bed bridge 1035 mm • Turning length in bed bridge 250 mm • Speed range: • Number of gears 16 • Fast motion speed: • Rapid motion speed 3800 mm/min • Explanations about rapid motion max. 5 min (30 min. break) • Electrical data: • Drive motor output 11 kW • Supply voltage 400 V • Mains frequency 50 Hz • Electrical connections: Total rated value 12 kW • Cooling lubricant system: • Coolant pump output 150 W • Spindle: • Spindle chuck Camlock DIN ISO 702-2 No. 8 • Spindle bore/rod passage diameter 105 mm • Spindle cone Ø113 (cone 1:20) mm • Tool holder max. chuck height 32 mm • Tailstock: • Tailstock chuck MK 5 • Tailstock quill stroke 235 mm • Tailstock quill diameter 90 m • Pitches: • Metric pitch 0,45 – 120 mm/rev (54 pitches) • Imperial pitch 80 – 7/16 Gg/1" (60 pitches) • Diametrical pitch 7/8 – 160 (42 pitches) • Modular thread pitch 0,25 – 60 mm/rev (46 pitches) Fgodpeyxncdefx Aggog • Travel: • Travel upper slide 230 mm • Travel carriage saddle 2900 mm • Travel cross slide 368 mm • Feed: • Longitudinal feed range 0,044 – 1,48 mm/rev (25 feeds) • Flat feed range 0,022 – 0,74 mm/rev (25 feeds) • Design features and safety • Hardened and ground Z-axis guideway • Spindle mount Camlock DIN ISO 702-2 No. 8 • Precisely crafted sled; all guides adjustable by wedge strips • Adjustment range upper slide ± 90° • Guaranteed concentricity of the spindle nose better than 0.015 mm • Waves, wheels and main spindle running in oil bath • Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings • Clear selection lever for switching the feed rates • Closed design of the rapid-action feed gear • Gears and shafts hardened and ground in an oil bath in precision bearings • Handwheels decoupled and tested according to EN 23125 • Two-channel right-left switch tested to EN 23125 • Switch with life cycle calculation, tested according to EN ISO 13849 • Right/left rotation on bed carriage via switching spindle switchable • Central lubrication in the bed slide • Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN • Leading spindle • Emergency stop blow switch, motor protection switch, lockable main switch • Emergency stop device with foot control • Safety handwheels with release function in the X-axis • Handwheels with adjustable fine scale 0.04 / 0.02 mm • Tailstock for taper turning ± 10 mm adjustable • Tailstock quill and handwheel with adjustable fine scaling

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming Fgedpfeuc Sw Asx Aggeg exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. Fgodpfxszl Rfxo Aggog • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming REVAMPED AS NEW Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW Fjdpfx Agey Uhxkegjgg - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: used, mileage: 215,050 km, power: 110 kW (149.56 HP), first registration: 10/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,331 mm, loading space length: 3,100 mm, loading space width: 1,450 mm, loading space height: 1,670 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 6505 ----Why Autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing and trade-in options available. Complete vehicle selection on autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: See the vehicle in its entirety, both inside and out, via the YouTube link: Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, only serviced at Mercedes-Benz Refrigerated van Refrigeration unit: Carrier Xarios 350 (-20°) Refrigerant: R-452A Optionally, we offer a refrigeration maintenance service from the manufacturer for only €899. Automatic transmission MBUX multimedia system (7" touchscreen) Parking package with 360° camera Blind Spot Assist Active Lane Keeping Assist Active Brake Assist Speed control system (cruise control) Controlled air conditioning (Tempmatik) Heated seats Comfort suspension seat Tachograph Sliding door assistance Thermal curtain for tailgate and sliding door On request, we offer a trailer coupling retrofit for only €599, and if possible, an increase in the trailer load to up to 3.5 tons. Fjdpfx Ajzzug Ejggsgg ---- Special equipment: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * Parking package with 360° camera * 360-degree camera system * Airbag on the passenger side * Electrically folding exterior mirrors * Exterior mirrors with blind spot assist * DAB tuner (digital radio reception) * Entry handle on the rear pillar on the right * Driving assistance system: active brake assist * Driving assistance system: active lane keeping assist * Tachograph operation at the front under the headliner * Digital tachograph * Chassis: Stabilization Level I * Speed control system (cruise control) * Rear door (opening angle 270 degrees) * Connection strip for electrical connections (driver's seat box) * Controlled air conditioning (Tempmatik) * Cable duct on the rear portal * Cable duct on the side wall * Marker lights on the side * Front engine drive with carrier for additional refrigerant compressor * Tire pressure control system * Windshield wipers with rain sensor * Seats in the cab: Double passenger seat * Seats in the cab: Heated driver's seat * Seats in the cab: Comfort suspension seat, driver's side * Seats in the cab: Driver's seat box, low * Rear door step * Heat protection glazing (windshield with band filter at the top) * Sliding door assistance on the right Standard equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag on the driver's side, hill-start assist, anti-lock braking system (ABS), anti-slip control (ASR), drive type: rear-wheel drive, display for windshield washer fluid level, electrically adjustable and heated exterior mirrors, both, outside temperature display, automatic activation for driving lights, entry handle for the sliding door on the cargo area partition, electronic brake force distribution (EBV), electronic stability program (ESP), driving assistance system: breakdown management, driving assistance system: crosswind assist, electric windows 2-fold, noise reduction outside, gearbox.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 731 h, pressing force: 51 t, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, number of axes: 7, This 7-axis TRUMPF TruBend 7050 (B28) was manufactured in 2022. It features a press force of 500 kN and a bending length of 1,530 mm. The machine includes a dynamic electromechanical drive and a CNC-controlled crowning system for precise bending operations. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 7050 (B28) press brake we have for sale. Contact us for further details. • Drive: Dynamic electromechanical Torque Drive • Capacity and dimensions: • Free upright clearance: 1,305 mm • Usable installation height: 385 mm • Throat depth: 250 mm • Working height: 1,150 mm • Machine frame: Stable welded frame • Axes and backgauge: • CNC axes: 7 (Y, X1, X2, R1, R2, Z1, Z2) • Backgauge: 6-axis independent system (X1/X2/R1/R2/Z1/Z2), both units move independently • Backgauge features: Carbon-fiber fingers, hardened reference surfaces, helical rack Z-drive, flexible positioning • Travels / working range: • Y stroke: 215 mm • X travel: 240 mm (max backgauge range 500 mm) • R travel: 153 mm • Speeds: • Y rapid/return: 220 mm/s • Y working: 25 mm/s • X: 1,500 mm/s • R: 750 mm/s • Z: 2,200 mm/s • Positioning accuracy: • Y: 0.002 mm • X: 0.02 mm • Z: 0.02 mm • Crowning: • CNC-controlled crowning, automatic compensation via drive • Crowning drive integrated in the table • Suited for multi-station bending • Y-axis / press beam: • Inductive Y measuring system • Dynamic spring-back compensation with automatic force-based correction • Hardened adjustable guide strips • Control system: • TRUMPF Touchpoint TruBend, 21.5" TFT Full HD (1920×1080) Fodpfx Agozu S Uasgjgg • Intel Core i5 2.7 GHz dual-core, Windows Embedded Standard 7 • Realistic 3D visualization, TRUMPF technology database • User management with Standard/Expert/Administrator levels • 10 user access cards included • Data interfaces: • USB, RJ45, Ethernet 10/100 Mbit/s • Central Link, OPC UA • Internet teleservice / remote diagnostics • Tool clamping and setup: • Automatic TRUMPF upper and lower tool clamping (self-centering, hardened) • Fast segment change • LED Tool Indicator integrated in upper clamping (shows setup positions/next bend station) • Safety: • Automatic BendGuard (part of Productivity Package Plus) • Optoelectronic safety system with automatic tool-height setting • Allows max permissible Y speed with foot pedal • Automatic adjustment, movable out of working area for side processing • Electronically monitored side safety doors • Electrically operated lift-up rear doors • Emergency stop • Transport securing devices • CE marking • Ergonomic package: • Front support table • Front and rear LED work-area lighting • Support for seated/standing operation • Document shelf • Drawer for measuring instruments Additional equipment • Measuring equipment: • Digital angle gauge • Digital caliper • 90-degree edge square • 1x TecZone Bend license • Wireless 2D code reader with Bluetooth connection Technical Specification Bending Length 1530 mm

Condition: used, mileage: 217,000 km, power: 140 kW (190.35 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 2nd battery (auxiliary battery) in cabin, 3-button remote control for central locking, overhead storage in driver's cab, Acoustic package, electrically folding exterior mirrors, exterior mirrors with blind spot assist, DAB tuner (digital radio reception), entry handle on rear right pillar, Driver assistance system: Attention Assist (drowsiness detection sensor), tachograph controls in front under overhead shelf, Suspension: Stabilization level I, fire extinguisher, vehicle without speed limiter system, rear lights partly LED, terminal strip for electrical connections (base of driver’s seat), instrument cluster with color display, chrome radiator grille, radiator grille frame in vehicle color, cable duct at rear portal, cable duct at side wall, side marker lights, metallic paint, engine PTO front with bracket for additional coolant compressor, MBUX multimedia system (10.25" touchscreen with navigation), Park Package with reversing camera, spare wheel with standard tires, spare wheel carrier under rear frame incl. jack, windshield wipers with rain sensor, LED High Performance headlights, sliding door cargo/passenger area left, rear mud flaps, Seats in driver's cab: double passenger seat, comfort sprung driver's seat, driver's seat base low, additional relay for auxiliary battery, rear door step, USB port center under dashboard (charging only), fleece battery 92 Ah, jack Additional features: 3rd brake light, storage compartment above windshield, storage compartment below dashboard passenger side, adaptive brake light, driver's airbag, Hill start assist, traction control (ASR), washer fluid level indicator, electrically adjustable & heated exterior mirrors (both sides), outside temperature display, automatic headlight activation, entry handle for sliding door at cargo partition, Electronic brake force distribution (EBV), Driver assistance system: Active Brake Assist, Side Wind Assist, Lane Keeping Assist, digital tachograph, rear door (opening angle 180 degrees), body/construction: standard high-roof panel van, keyless start, child lock, communication module (LTE) for digital services, fuel tank: main tank 71L, full partition wall in cargo area, steering column (mechanically adjustable), headlamp leveling system, Mercedes-Benz emergency call system, engine 3.0 L - 140 kW CDI CAT, wheelbase 3,665 mm, low emissions according to Euro 6 standard, sliding door cargo/passenger area right, driver's seatbelt system with warning device, seat upholstery: fabric, start/stop engine system, service interval display (Assyst), heat-insulating glazing (windshield with upper band filter), gross vehicle weight 3.5 t * Power steering * Partition wall * Central locking Air conditioning: Air conditioning Safety: ABS * ESP Parking aid: Camera * Rear * Front Between wheel arches: 96 cm The vehicle is in TOP condition!!! Mercedes service history up to 160,000 km, 2 keys Financing available! Fjdjzzm Inepfx Aggsgg