Used Levigaltecnica Wide Belt Sander for sale (13,341)

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Features and technical data: • Robust, space-saving 2-belt wide belt sander for demanding pre- and finish sanding • Constant working height thanks to adjustable top section • Working width: 1,350 mm • Overhead sanding, with 2 sanding units • 1st unit equipped with a grooved rubber contact roller of proven hardness • Pneumatically (program controlled) adjustable contact roller; contact roller height continuously adjustable according to a sanding grit scale • 2nd unit equipped with an electronically controlled, segmented sanding pad (segment width 35 mm) and quick-change graphite wear strip • Parallel spring-mounted, ground steel pressure roller at the infeed • Rubber-coated pressure rollers between sanding units and at the outfeed • Motor: 15 kW (20 HP), 400 V/50 Hz, with soft start for reduced current draw during startup • Motorized, fine-adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatically controlled, compressed air consumption approx. 4 l/min • Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage • Workpiece feed: 0.75 kW (1.0 HP) with fabric-reinforced rubber conveyor belt Bsdpfx Ameuhiq Dj Telk • Fully integrated electrical system with contactor control; automatic star-delta start for the main motor, motor protection, and ammeter for monitoring material removal • Maximum passage height: 200 mm • Sanding belt dimensions: 1,350 x 2,000 mm Comfort features: • Automatic thickness adjustment across the entire working width • Workpiece overthickness protection with immediate feed stop and automatic lift of the machine top section • Continuous adjustment of material removal • Electronic feed rate control at the operator panel, stepless from 3 to 15 m/min • PLC control/programming with color touch-screen and TEACH-IN memory function (store parameters at the push of a button based on sanding results, i.e., no manual data entry required) • Pneumatic conveyor belt tracking control • Workpiece support rollers at infeed and outfeed • Enormatic: Fully automatic quick setup and feed solution • eco*-Energy saving mode • Error diagnosis • Job and operating hour counters • Machine in E-Plus version (RE) Including outfeed table extension, 1,350 mm, foldable, without insert plate Location: Solingen Availability: short-term

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Bedpfozh Rufox Am Tslk Features and technical data: MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT ROLLER, 2ND BELT COMBINATION UNIT ROLLER/SHOE FOR SOLID WOOD, VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING SHOE WIDTH mm: 50 - MAIN BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER hp: 0.75 - Infinitely variable feed belt gearbox, speed adjustable m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR hp: 0.33 - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2007, machine/vehicle number: MR006928, Robust and precise wide belt sander with a working width of 1,100 mm. In good condition and ready for immediate use. This Kündig Premium-2 is a robust and precise wide belt sander, equipped with two sanding units: a calibration roller for efficiently sanding solid wood and sheet material to size, and a sanding shoe for a fine, uniform finish. This sander is in good condition and ready for immediate use. Technical specifications: - Number of sanding units: 2 - Sanding unit 1 type: Calibration roller - Sanding unit 2 type: Sanding shoe - Maximum sanding width: 1100 mm - Maximum working height: 200 mm Bledpfx Amszh Hixo Tjk - Minimum working height: 3.5 mm - Feed rate: 3 - 15 /min - Sanding belt length: 2000 mm - Sanding belt width: 1120 mm - Serial number: 26453

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,100 mm, working height: 950 mm, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, input voltage: 400 V, TECHNICAL DETAILS Sanding width: 1,100 mm Sanding thickness: 3 to 160 mm The machine consists of 2 sanding units, one each at the top and bottom: Top Model: VEGA 311 MRL Working height: 950 mm Sanding belt dimensions: 1,120 x 2,620 mm Sanding roller diameter / power / feed speed: 180 mm / 22 kW / 47 m/s Infeed roller diameter / power / feed speed: 220 mm / 22 kW / 18 m/s Combination roller / sanding pad, power / speed: 12.5 / 16 kW, 9 / 18 m/s Finishing brush unit power: 0.75 kW Adjustable feed speed: 2.5 - 13 m/min Extraction capacity: 11,800 m³/h Motorized height adjustment: 0.75 kW Bottom Model: VEGA U 311 MRF Working height: 920 mm Sanding belt dimensions: 1,120 x 2,620 mm Sanding roller diameter / power / feed speed: 180 mm / 22 kW / 47 m/s Infeed roller diameter / power / feed speed: 220 mm / 22 kW / 18 m/s Combination roller / sanding pad, power / speed: 12.5 / 16 kW, 9 / 18 m/s Finishing brush unit power: 0.75 kW Adjustable feed speed: 2.5-13 m/min Extraction capacity: 15,600 m³/h Motorized height adjustment: 0.37 kW Bsdpfxezhm Ste Am Tjlk MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Phases: 3-phase EQUIPMENT Pneumatic sanding belt tensioning

Condition: excellent (used), Year of construction: 2008, Biesse Artech Levia 310 - 1350. YoM: 2008. UK Price £9,000 + VAT Single belt Finishing sanding machine which has been used for pre-sanding and de-nibbing in the paint shop. Now surplus to requirements due to closure of the paint shop. Can also Calibrate and sand solid woods. Single head / belt construction. Connected to services and available for any demonstration. Excellent Condition. Working width 1350mm. Thickness between 3mm & 200mm. Bedsyuy R Dopfx Am Tslk Combi Working Unit Grooved steel Calibration Roller. AND Electronic Sectioned Pad. Cleaning brush on outfeed. Vacuum table to increase panel holding. Compressed air belt cleaning. Automatic panel thickness setting. Extended infeed rollers.

Condition: used, Year of construction: 2005, Number of belts: 2-belt max. Passage height: 150 mm max. Working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller, sanding shoe 1st unit: electronic individual segments 35 mm Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1370 mm Sanding belt speed of 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubber-coated contact roller 65° Shore, sanding shoe 2nd unit: electronic individual segments 35 mm Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1370 mm Sanding belt speed of 2nd unit: continuously variable 2 - 18 m/sec Bsdpfx Aozkh Syom Tjlk Belt blowing device: for 2nd unit Cleaning brushes: Yes Finish sanding possible: Yes Vacuum carpet: Yes Feed rate: continuously variable from 2.5 - 13 m/min Control: Touch screen, electric/pneumatic Belt oscillation: yes Infeed height: fixed (top part moves) Table display: digital Working height or table height: 900 mm Motor power: 36 kW Storage location: Nattheim

Condition: excellent (used), Catalogue No.: 7810 TECHNICAL DATA max working width: 630 mm max working height: 110 mm 2 units: 1) grooved rubber roller for calibration 2) grooved rubber roller for calibration + pad + metal roller *from above: metal feed-in slip roller unit metal slip roller unit metal slip roller *from below: 2 metal slip rollers feed belt 2 metal slip rollers pneumatic belt oscillation 2 feed speeds motor: 2×7.5 kW electric table elevation operating pressure: 6-8 bar extraction port diameter: 2x160 mm overall dimensions (L/W/H): 1650x1060x1970 mm weight: 972 kg – Polish manufacture – 2 units – unpainted Blodpfx Ajzmgk Hsm Tek – very good condition – used sander Net price: 25,900 PLN Net price: 6,160 EUR (at exchange rate 4.2 EUR) (Prices may fluctuate with significant currency changes)

Condition: used, Brilliant 1 1100 Cd-lacquering machine High-quality product from Switzerland CONSTANT TABLE MACHINE / automatic head positioning Wide-belt calibrating and fine-sanding machine Combined unit: contact roller and sanding pad unit with electronically controlled segmented sanding shoe, DIAGONAL / entire sanding unit adjustable at a 10° angle Contact roller level adjustable steplessly according to grit scale Power connection approx. 14 kW Working width 1100 mm Lacquering sanding package: Blodjzp H Udepfx Am Tsk oscillating belt sanding steplessly adjustable sanding belt speed Feed speed 3 - 15 m/min, steplessly adjustable sturdy vacuum table with lacquering felt, fan integrated into the machine frame Thickness adjustment across the entire working width ENORMATIC quick adjustment with feed activation (for long workpieces) Touchscreen display for automation and management of all work programs Infeed and outfeed tables with roller supports very few operating hours First delivery in 2014 / from a training workshop Machine is in VERY WELL-MAINTAINED condition available from Lieboch warehouse

Condition: excellent (used), CATALOGUE NUMBER: 6582 TECHNICAL DATA - max. width of workpiece: 920 mm - max. height of workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW Bjdpozcmqtjfx Am Tslk From above: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers From below: - 3 slip rubber rollers - conveyor belt - pneumatic tape oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar - pneumatic brake - diameter of extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg – German made – 2 units – used grinder, very good condition Net price: 24,900 PLN Net price: 5,929 EUR Net price calculated according to the exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalog number: 7808 TECHNICAL DATA max. width of the processed workpiece: 1100 mm max. height of the processed workpiece: 160 mm 2 units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above 2 metal rollers, sliding units cleaning brush – from below conveyor belt pneumatic belt oscillation with photocells electric table lifting 2 feed speed types, 1.1 kW motor: 15 kW with pneumatic brake additional pneumatic shoe operating pressure: 6-8 bar diameter of the dust extraction nozzle: 2x160 mm, 1x120 mm overall dimensions L/W/H: 2700x2100x2200 mm weight approx.: 3000 kg – German production – 2 units – additional pneumatic shoe – unpainted – used grinder, very good condition Net price: 32,900 PLN Net price: 7,833 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations) Bedpfx Amozcd Ams Telk

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Bsdpfxjw Naanj Am Telk MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw - Electronic work height display - Electronically controlled sanding belt oscillation Bsdpfx Amjtwqn Ss Tjlk - Rubber pressure rollers - Anti-kickback device at infeed before first unit - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor - Automatic belt centering Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 9673240, grinding width: 1,100 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 1,120 mm, Combination sanding unit with contact roller and air sanding pad Brush roller Pneumatic sanding belt tensioning Motorized thickness adjustment Bledpfx Amjtppzve Tek Technical data max. working width 1100 mm max. workpiece thickness 150 mm min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power sanding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0 kW Operating pressure 6 bar Air consumption approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Machine depth approx. 1700 mm Machine height approx. 1900 mm

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide-belt sanding machine with transverse and longitudinal sanding units for sanding, among other things, veneer before painting. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been renewed. Sanding width: 1300 mm Working height: 880 mm (constant) Workpiece thickness: max. 3-140 mm Conveyor bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, incl. dust extraction system Feed speed: 4.5-22 m/min (adjustable) Sanding units: transverse/longitudinal/brush Brush roller unit: centrally adjustable in height Diameter: 150 mm Drive power: 1.5 kW Bristle material: fiber Bedpfeya I Riox Am Tslk 1. Transverse sanding unit: fail-safe braking system, pneumatic belt tension, belt monitoring, pressure pad belt system, intermittent belt extraction, sanding belt dimensions: 4900 x 150 mm, belt sanding speed: 12 + 24 m/s, drive power: 13 / 17 kW 2. Longitudinal sanding unit: stepless, electronic control of the sanding belt speed via a frequency converter, fail-safe braking system, pneumatic belt tension, intermittent belt extraction, infrared belt control, sanding belt running in the opposite direction, sanding belt dimensions: 2620 x 1350 mm, belt sanding speed: 0.3 – 12 m/s, drive power: 11 kW Graphical operator terminal for entering machine setting values, incl. numerical thickness adjustment and display of fault sources, workpiece throughput, and feed speed. Electronically controlled pressure bar. Distance between guide rollers: 40 mm Pneumatic belt tension. The contact surfaces of the pressure bar automatically adjust to the shape of the workpiece. Weight: approx. 5500 kg Space requirement: approx. 2550 x 2675 x 2400 mm

Condition: used, Year of construction: 2008, operating hours: 4,300 h, functionality: fully functional, grinding belt width: 2,000 mm, Finishing sander equipped with: 1 belt with CSD pad, width: 2000 mm Bljdpfx Aezk S Nvjm Tek 1 belt with CSD pad, width: 2000 mm

Condition: used, Year of construction: 2008, operating hours: 4,300 h, overall weight: 16,000 kg, grinding belt speed: 14 mm/s, grinding belt length: 2,620 mm, grinding belt width: 2,000 mm, Calibrating and sanding machine, width: 2000 mm, equipped with: 1 belt with steel roller for calibrating Blsdpfx Amszk S Nce Tjk 1 belt with CSD pad for finishing sanding 1 belt with CSD pad for finishing sanding

Condition: new, Year of construction: 2024, functionality: fully functional, UNITEK NICE 950 2N RKRT Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Sanding roller, rubber-coated, Ø 150 Finishing pad 50 mm Sanding belt motor power 15 HP Sanding belt speed 18/16 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning rollers Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Dust extraction 2 pcs. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Belt motor power 20 HP Automatic conveyor belt centering Oscillating cleaning blower, timer-controlled, 2 pcs. UNITEK NICE 950 1N KRT Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning roller Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Dust extraction 1 pc. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Oscillating cleaning blower, timer-controlled UNITEK NICE 650 1N KRT Working width 650 mm Sanding belt size width x length 670 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/sec Bljdpeznwp Aofx Am Tok Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Self-centering of sanding belts using the system “ECO GEAR SYSTEM” Quick stop belt brake Oscillating tensioning roller Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness 2 rollers on infeed and outfeed table 1 dust extraction port Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Mobile cleaning blower for the sanding belt Warranty 12 months on spare parts.

Condition: excellent (used), CATALOGUE NUMBER 7967 TECHNICAL DATA - max. width of workpiece: 1100 mm - max. height of workpiece: 170 mm 2 units: 1) metal grooved roller for calibration 2) grooved rubber roller + shoe + metal roller – from above: - slip rubber roller - unit (two units on one motor) 15 kW - slip rubber roller - take-off rubber roller - tape blowing – from below: - 2 slip metal rollers - conveyor belt - 2 slip rubber rollers - pneumatic tape oscillation Bedpfx Asza Elwem Tolk - grinding thickness potentiometer - electric table lifting + manual (for precise adjustment) - pneumatic brake - 2 feed speed types - working pressure 6-8 bar - dust extraction nozzle diameter 2x140 mm - overall dimensions L/W/H 1830x1670x1950 mm - weight 1160 kg ADVANTAGES - Made in Italy - 2 grinding units - Unpainted - Used sander, in perfect condition Net price: 72900 PLN Net price: 17357 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Industrial cross-sanding machine for high-quality surface finishing of wood, veneer, and painted workpieces. The combination of a cross-sanding and longitudinal-sanding unit enables efficient and precise processing in a continuous flow. Processing units: 1 × Cross-sanding unit with pressure pad belt 1 × Longitudinal-sanding unit 1 × Brushing unit Technical data Technical data: Bedpjzinviofx Am Tjlk Sanding width: 1,300 mm Maximum workpiece thickness: 140 mm Working height: 780–920 mm Feed rate: 4.5–22 m/min Cross-sanding belt: 4,900 × 150 mm Pressure pad belt: 4,650 × 140 mm Longitudinal-sanding belt: 2,620 × 1,350 mm Brush roller: Ø 150 mm Workpiece vacuum clamping system: 7.5 kW Total connected load: 44 kW Machine weight: approx. 3,850 kg

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg Bljdpfx Aezkufgjm Tjk ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), CATALOGUE NUMBER: 5799 TECHNICAL DATA - Max. width of workpiece: 230mm - Max. height of workpiece: 140mm - Min. length of workpiece: 300mm - 2 sanding units: - Upper and lower + platens * Upper: - 2 sliding, metal pressure rollers - Pressure Bljdezkrxkspfx Am Tjk - Sanding unit: 2 metal rollers + platen - Sliding pressure roller - Conveyor belt * Lower: - Conveyor belt - 2 sliding, smooth metal rollers - Pressure - Sanding unit: 2 metal rollers + platen - 3 sliding, smooth metal rollers - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Smooth feed rate adjustment using a frequency inverter: 3-15 m/min - Feed motors: 2 x 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air consumption: 6-8 bar - Diameter of dust extraction nozzles: 4 x 100mm - Overall dimensions (L/W/H): 2340 x 1420 x 1920 mm - Weight: 1480 kg - For short components (belts overlap) - German manufacture - Very good condition - Unpainted - Used sander Net price: 18900 PLN Net price: 4500 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (Price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 7549 TECHNICAL DATA max. width of workpiece 1100mm max. height of workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + shoe + metal roller Bodpfx Amjzkfybs Tjlk – from above: metal roller, slip unit metal roller, slip unit with shoe metal output roller, slip – from below: conveyor belt pneumatic belt oscillation electric table lifting 2 types of feed speed motor 11kW with pneumatic brake working pressure 6-8bar diameter of extraction nozzle 2x150mm overall dimensions L/W/H 1960x1700x2000mm weight approx. 2000kg – made in Germany – 2 units – unpainted – used sander, very good condition Net price: 31900 PLN Net price: 7595 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Year of construction: 2015, operating hours: 3,240 h, functionality: fully functional, machine/vehicle number: S600RCS110, total width: 1,600 mm, total height: 2,050 mm, total length: 2,700 mm, working width: 1,200 mm, grinding width: 1,200 mm, workpiece weight (max.): 1 kg, overall weight: 1,400 kg, grinding height: 170 mm, power: 8.83 kW (12.01 HP), height adjustment type: electric, type of input current: three-phase, compressed air connection: 6 bar, grinding belt width: 1,115 mm, table length: 2,680 mm, table width: 1,230 mm, Equipment: 3rd hydraulic function, fully functional “Sandingmaster” machine from SCM, currently in operation. Additionally available are original, unopened EKAMANT sanding belts of various grits, which can only be used with this belt sanding machine. Bedpfezm Sliox Am Tslk

Condition: used, Year of construction: 1997, used good condition Bjdpfx Amezkvy Eo Telk low mileage cleaned functionally tested partially refurbished completely adjusted Includes 1 sanding unit Combination unit with electronic shoe Dust brush Manufacturer: Bütfering Type: ECO e1100 Year of manufacture: 1997 Machine no.: 34546 Working width approx. mm: 1100 Passage height approx. mm: 150 CE type-tested Number of units: 1 Belt dimensions l x w mm: 1120 x 1900 Feed speed m/min: 4 + 8 Calibrating roller Grooved Rubberized Combination unit kW: 11 Electronic segmented shoe Dust extraction connection mm: 180 + 140 Space requirement approx. L x W x H mm: 1700 x 1700 x 2000 Weight approx. kg: 1500 Location: 97447 Gerolzhofen, free loading, unpacked Handover in as-is condition, as inspected, without warranty and guarantee

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 26476, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 7,500 kg, grinding height: 200 mm, height adjustment type: electric, grinding belt length: 2,000 mm, workpiece height (max.): 200 mm, grinding belt width: 1,350 mm, power of feed motor: 2,200 W, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,350 mm, Five-belt calibration and fine grinding system, top and bottom grinding for solid wood or wood materials Factory overhauled to the latest standard 5 sanding units (2x calibration roller top / bottom + cross sanding unit, 2x segment sanding pads, 1 of which includes a unique diagonal sanding unit (patented KÜNDIG Brilliant technology)), as well as the KÜNDIG Enormatic control for automatic workpiece feeding. Machine completely overhauled - for more information see appendix Bljdpfsvy Dt Nsx Am Tsk