Used Litech Hm 300 - 7.5Kw for sale (14,721)

Condition: excellent (used), Year of construction: 2001, Boiler Vitoplex 300 130Kw Used Year: 2001 Type: TX3 Output: 130Kw Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Njdpfx Aajtu Txhozjwl Request more information

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Nedpfx Aaoz Agzdszewl Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Nsdpfx Aaoz Ag Abezewl Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Year of construction: 2022, condition: like new (used), functionality: fully functional, REF: MM6430 1 x Easibelt Coveya horizontal mobile conveyor with inverter. Manufacturer - Coveya Ltd Model - EB300 S/S. Date of manufacture - 2022. Belt dimensions - 10500mm L x 300mm W (270mm useable) x 920mm H (height adjustable frame). Distance between flights on belt - 950mm. Nedpfx Ajy Unm Isazswl Condition - Excellent, used for one season packing advent calendars.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Jaw Crushers generally crushes 200 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. Nwsdpfozzcrvjx Aazsl GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1175 • Type: Primary Jaw Crusher • Inlet Dimensions: 1070 x 760 mm • Jaw Opening: 45-160 mm • Max Feeding: 760 mm • Capacity: 200 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 110 Kw • Bearings: Heavy duty SKF-FAG • Weight: 21360 kg • Dimension: 2730 x 1698 x 2492 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR300 5AX. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, Renishaw probing, 30 Station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 410 mm, Y Axis 610 mm, Z Axis 500 mm A Axis +30° to -120°, C Axis Continuous 360° TABLE: Diameter 300 mm Max Swing Diameter 300 mm, Max Weight on Table (evenly distributed) 100 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 FEEDRATES: Rapid and Jog (Max.) 36 m/min Cutting Feed Rate (Max.) 20 m/min Rotary Axis Speed 25 rpm BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Through Spindle Coolant Coolant Flow Rate at Cutter 160 L/min Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min Njdpjzzax Tjfx Aazewl GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X410 Y610 Z610 mm A360| 12000RPM | BT40 Accessories: 5 axis Table, Renishaw Probing, Side Mount Tool Changer, Swarf conveyor

Condition: used, OKK HM 4 is a horizontal machining center designed for precision, high accuracy and reliability. Working capacity: table 400×400 mm, travels X 560, Y 510, Z 560 mm; workpiece up to 620×620×700 mm, table load 400 kg. Key specs: spindle ISO 40 100–12,000 rpm (stepless), max torque 150 Nm, feed 1–40 m/min, rapid 40 m/min, spindle nose‑to‑table 150–710 mm; machine size L2100×W3995×H2884 mm. Equipment: 60‑station tool magazine, tool Ø 82 mm (140 with free adjacent pockets), length 300 mm, max tool weight 8 kg, tool change 1 s, chip‑to‑chip 3.4 s, automatic pallet changer (2), pallets 8, coolant 400 L with 20 bar through‑spindle, status light. Delivers tight tolerances; ideal for automotive, aerospace, medical, watchmaking and machine tool sectors. Nodpfx Aaez Dv Akszjwl

Condition: used, Year of construction: 2021, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 505 IE 2021, tank capacity: 300 l, usable tank capacity: 300 l, total length: 1,120 mm, total width: 1,120 mm, total height: 1,000 mm, inner diameter: 900 mm, outer diameter: 1,000 mm, overall weight: 400 kg, wall material: stainless steel, wall thickness: 25 mm, wall structure: double-walled, number of chambers: 1, manhole diameter: 500 mm, manhole location: front, reception height: 500 mm, discharge height: 500 mm, operating temperature: 10 °C, operating pressure: 3 bar, pressure (max.): 2.55 bar, power: 38 kW (51.67 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, The core Thissen & Stecher TSRR series is primarily manufactured as an indirectly heated electric vessel. However, Thissen & Stecher designs for energy input from gas. The specific factory physical and structural dimensions for the TSRR 300-liter core chassis provide the official footprint for this unit: 📐 Structural Dimensions (300L Chassis) Internal Diameter: Ø 900 mm Internal Depth/Height: 500 mm External Width: 1,120 mm External Depth: 1,250 mm External Height: Approx. 1,000 mm to the lip (excluding top-mounted lid clearance/venting arrays). ⚖️ Weight: Net Weight (Empty): The baseline unit weight ranges between 380 kg and 450 kg, depending on the reinforced frame option and agitator configuration. Operating Weight (Full): Approx. 680 kg to 750 kg when loaded to its full 300L liquid capacity. 🔥 Gas Heating & Utility Requirements. Fitted with a gas burner jacket, the unit utilizes an indirect thermal jacket fluid or a direct-fired bottom array. Nedjzzxcwepfx Aazswl Thermal Power Output: Typically engineered between 38 kW and 44 kW to manage a rapid heat-up curve for a 300L volume. Gas Connection Port: 3/4 inch or 1 inch standard gas line connection. Electrical Supply (For Agitator): Requires a 3-phase 400V / 50Hz connection to power the bottom-driven heavy-duty scraping agitator. ⚙️ Operational Features: Agitator System: Bottom-driven stable agitator with standard stepless speed regulation from 10 to 60 RPM. Tilt Angle: Built with an integrated 5° oblique slope toward the front outlet valve to guarantee smooth product discharge and improved mixing geometry. Controller: Standard integration of the Aditec MIC 900 microprocessor supporting multi-step cooking programs.

Condition: used, machine/vehicle number: 008157, Position 1: Brushing Machines GIARDINA-1VE - 300 Position 2: Sprayers GIARDINA-1VE - 300 Position 3: Panel Feeding and Loading GIARDINA-1VE - 300 Nwedpsw Sdu Ujfx Aazsl

Condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. Trumpf TruPrint 3000 G02, featuring Zirox sensor, single laser, and powder bed monitoring options. Trumpf TruPrint 3000, including filtration system Serial number: S0721Q0022 Laser runtime: 17,508 hours (laser beam on) Most recently used with AlSi10Mg aluminum alloy The 3D printer has already been dismantled by the manufacturer. Dismantling and functional test reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. Accessories: 4x dosing containers 1x build cylinder 1x overflow container Nedpfx Aaszpvumjzewl Various spare parts (e.g., protective glass) Manuals An Armanni CAR.Elev. pallet truck for container exchange is also in stock and available as an optional add-on. Faster production of high-quality 3D components D1. Machine concept The TruPrint 3000 is a versatile medium-format machine featuring external part and powder management for the industrial production of complex metal components via 3D printing. Thanks to its large build volume, it offers great flexibility regarding the size, quantity, and geometry of parts for specific applications. Technical data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials: Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate cm³/h 5 – 60 Layer thickness μm 20 – 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 – 500 O₂ concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring – Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas – Nitrogen, argon Power supply V / A / Hz 400 – 32 – 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The specifications in our quotation and order confirmation are authoritative. Technical data TruPrint 3000 Tab. 3

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Nwedpfx Aaeyhcabozsl Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), functionality: fully functional, mileage: 34,000 km, power: 219.91 kW (298.99 HP), first registration: 10/2010, fuel type: diesel, overall weight: 14,500 kg, tire condition: 95 %, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 11/2026, fuel: diesel, color: red, driver cabin: other, gearing type: automatic, suspension: steel, number of seats: 9, total length: 7,750 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, additional headlights, airbag, differential lock, fog lights, parking heater, trailer coupling, truck registration, Iveco 160 E HLF 20, superstructure by MAGIRUS AF 3 Road-going 4x2 drive Crew cab for 1 + 8 personnel Rear axle differential lock 2000 l water tank and 150 l foam tank Pump, 2000 l/min, manufactured by MAGIRUS Pneumatic lighting mast at the rear of the superstructure Area lighting Camera system Storage for electrical equipment/lighting PA system storage/backrests in the cab Special paint job, red/yellow Extendable hygiene board Martin fanfare system Front strobe lights Auxiliary heater Electric exterior mirrors Roof storage for extension ladder and 3-part sliding ladder Tool deployment panel Rear warning system Tire chains for rear axle Euro 5 engine Nwjdjzx D Nwepfx Aazjl One-person hose reel system L/W/H: 8200x2500x3100 mm New inspections (MOT/emission test/safety inspection) available upon request for an additional charge Price available upon written request Sale without any included equipment -Sale only to authorities and businesses- (no sale to private individuals) Sold as a used vehicle without warranty.

Condition: ready for operation (used), JW Froehlich MFL 300 leak tester, front door fastening latch missing—see photo, SN:6/50 600.01, used, normal signs of use, 100% functional, scope of delivery as per photos. Njdpfx Asx Etzxoazswl

Condition: used, Year of construction: 2023, operating hours: 489 h, Homag EDGETEQ 300 The machine will be available from approximately the end of December 2026. For further information about the machine, please see the images or feel free to request it. Nodpfx Aaoz D U A Aszswl

Condition: ready for operation (used), JW FROEHLICH MFL 300 leak tester SN:6/50 600.02, the locking cylinder of the front door is missing, see photo, used, normal signs of use, 100% functional, scope of delivery as per photos Njdpfx Aerv S Dqoazjwl

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Nodpfx Aaowl H Niszowl Model - KBBFT1300A. Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: used, RMS 300 Reignmac Multi Rip Saw. Came out working. 33.37kW . Saws 200mm to max of 305mm Nwodpfx Aajz Dx Agezsl

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW Nwodpoy A Ewtjfx Aazol — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Condition: used, functionality: fully functional, color channels: CMYK, Weiß, Gloss/Klarlack, Primer, number of print heads: 4, year of last overhaul: 2026, type of input current: AC, input current: 2 A, input voltage: 100 V, Equipment: brochure finisher, documentation/manual, For sale is a Roland VersaUV LEF-300 UV flatbed printer including a BOFA extraction system and a primer configuration. Nwedpfx Aez Eazgoazjl Extensive investment – 4 new original Roland print heads A major advantage of this machine: significant investments have already been made in important components. All 4 print heads have been replaced with new original Roland print heads. In addition, 8 dampers, 4 cap tops, a dust filter, and other maintenance and wear parts have been renewed. A total of €7,227.12 gross was invested in these works, including the four new original print heads, other components, materials, and technician services. The corresponding invoice is available and can, of course, be viewed upon serious interest. Primer configuration Approximately €700 was also invested in reconfiguring the machine for primer application. Instead of a second clear coat/gloss channel, primer is now directly available via the machine. This is particularly interesting for applications where additional surface preparation is required to improve adhesion. The machine is equipped with CMYK/color, white, gloss/clear coat, and primer. BOFA extraction system included The offer also includes a BOFA extraction system. This means that not only the printer itself is offered, but a comprehensively equipped complete package. Inspection & test print possible Especially when purchasing a used professional UV printer, one should be able to personally inspect the machine before buying. Therefore, inspection and test printing on site are expressly possible. The existing invoices and documentation regarding the work carried out and the replacement of the print heads can also be viewed. Why is the printer being sold? I acquired the Roland specifically for my own production and subsequently invested extensively in the machine. However, in practical use, it has become apparent that I need a different production process for my very specific application and my requirements for the final product. Therefore, I am restructuring this production area and selling the Roland. Location & shipping Location of the machine: 3730 Austria Collection and inspection on site are possible. Alternatively, the machine can be shipped throughout the EU by a forwarding agent. The transport costs depend on the respective destination and can be clarified in advance. Price €16,900 net (negotiable) An interesting complete package for commercial enterprises looking for a Roland VersaUV LEF-300 with four already renewed original Roland print heads, a primer configuration, and a BOFA extraction system. Please feel free to contact me if you are seriously interested. Inspection and test printing are possible by appointment. Weight: 144 kg Input voltage: 100–240 V Frequency: 50/60 Hz Current consumption: 2.1 A Number of phases: 1 φ Printing area: 770 × 330 mm Max. workpiece/media size: 800 × 360 mm Max. object height: 100 mm Max. object weight: 8 kg Printing resolution: max. 1,440 dpi

Condition: used, Used Silverson model GX10/1500 V range stainless steel high shear mixer. Unit direct driven by approximately 7.5kw electric motor. Stainless steel mixing shaft measures approximately 1100mm long with 100mm diameter upwards facing general purpose disintegrating head. Nwsdpfx Aaozvylcozel

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 680 mm, spindle motor power: 26,000 W, total height: 2,000 mm, total width: 2,050 mm, overall weight: 6,600 kg, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details. • CNC: Mazatrol Fusion 640T Nexus (8.4" color LCD) • CE marked • Capacity • Max bar diameter: 77 mm • Max cutting diameter: 420 mm • Max swing: 680 mm • Spindle bore: 88 mm • Spindle center height: 1,080 mm • Max chuck workpiece weight: 450 kg • Main spindle • Max spindle torque: 600 Nm • Spindle nose: A2-8 • Chuck: 10" through-hole, type B210A815X • Axes • Cutting feedrate: X 8 m/min, Z 8 m/min • Rapid traverse: X 30 m/min, Z 25 m/min • Turret Nodpsz Eavwsfx Aazowl • Type: Drum turret • Stations: 12 • Turning tool shank: 25 × 25 mm • Indexing time: 0.8 s (½ turn), 0.2 s (single step) • Tailstock • Programmable, motor-driven movement • Stroke: 645 mm • Taper: No. 5 • Dead centre included • Live centre: NSK LC-5SW (speed up to 4,000 rpm) • Thrust selection: 10 levels • Control equipment and functions • Mazatrol Fusion 640T Nexus • Interfaces: RS-232C, Network • Background tool-path check • Machining Navigation – Prediction / Monitor / Results • Velocity and feedrate control • Tool path storage • 3.5" FDD unit • Coolant / machine equipment • Complete coolant system (tank 210 L, pump 520 W) • Preparation for side chip conveyor • Automatic tool eye • Hydraulic chuck pressure interlock • Chuck open/close confirmation • Double foot switch • Full chip and coolant guarding • Work light • Electrical • Power requirement (30 min rating): 49.69 kVA • Continuous power requirement: 43.83 kVA Additional equipment • European-market power transformer • Foundation plates • One set of adjusting tools • Manuals included Technical Specification Driven Tools No Counter Spindle No

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 100166696, AHLSTAR pump APP43-300 S Centrifugal pump with mounting frame, motor not included. Nodpfxexg Nxae Aazswl

Condition: good (used), 1 x Unipack Paddle Mixer 300 Litres Nodpfoz Ebnzjx Aazswl Model: MIX 300

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, total height: 1,900 mm, total width: 2,400 mm, total length: 6,000 mm, type of input current: AC, overall weight: 500 kg, input voltage: 220 V, machine base height: 900 mm, operating pressure: 9 bar, year of last overhaul: 2027, control voltage: 220 V, input current: 16 A, input frequency: 50 Hz, inner diameter: 610 mm, space requirement length: 6,000 mm, space requirement height: 2,000 mm, space requirement width: 3,000 mm, We offer this ready for use The Raw Juice Company TOP-21 Bottle Filling Machine 100ml - 3000ml, year of construction 2022. Manufacturer: The Raw Juice Company Nwedpfx Ajz D Uuxjazol Model: TOP-21 Year of construction: 2022 year Condition: ready for use / Currently in use Category ID: 310 Type ID: 1066 Machine type: Bottle Filling Machine 60ml - 3000ml This versatile filling machine is currently being used for filling bottle sizes from 60ml - 2000ml. It is a fully automatic line, run by 1 person. Put the bottles on the line, it will fill them (4 bottles at a time) with a 4 headed diving nozzle (to avoid foaming), then moving the bottles along to a cap placer and finally a to a cap tightener. The cap tightener is set up for a 38mm cap (this can be changed). This line has been regularly maintained by our in house service team and is in perfect working order. Capable of filling from 500 - 2000 bottles P/Hour If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2015, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 210054, tank capacity: 225 l, usable tank capacity: 200 l, total length: 800 mm, total width: 1,600 mm, total height: 1,020 mm, inner diameter: 1,498 mm, overall weight: 315 kg, wall material: stainless steel, wall thickness: 10 mm, wall structure: double-walled, number of chambers: 1, manhole diameter: 50 mm, manhole location: front, reception height: 250 mm, discharge height: 250 mm, operating temperature: 300 °C, operating pressure: 20 bar, input voltage: 230 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, The Firex Easybratt 200L Gas Variant (BM1G200I) is a heavy-duty industrial tilting bratt pan engineered for bulk cooking, braising, shallow frying, and boiling. While marketed in the 200-liter chassis tier, its precise volumetric breakdown consists of a 225-liter total geometric capacity with a 170-to-200-liter usable working capacity. The comprehensive breakdown of dimensions, weight, and utilities sourced from the manufacturer's technical specifications includes: 📐 Physical Dimensions & Cooking Vessel Overall Width: 1600 mm Overall Depth: 900 mm Overall Unit Height: 1020 mm (with lid closed) Vessel Internal Width: 1498 mm Vessel Internal Depth: 564 mm Vessel Internal Height: 250 mm Cooking Surface Area: 84 dm² 🏋️ Weight & Construction Details: Net Weight: 315 kg. Pan Base Thickness: 10 mm to 15 mm high-thickness compound steel for balanced heat distribution. Nwsdsz Ad Stspfx Aazel Chassis & Tank Material: High-grade AISI 304 stainless steel throughout. Tilting Mechanism: This is a motorized model; the suffix is BM1G200I. Lid: Double-skinned, counterbalanced lid with spring loading to reduce heat loss and enable hands-free opening. 🔥 Gas & Burner Specifications: Total Gas Power: 40 kW. Burner Type: High-efficiency stainless steel multi-tube gas burners. Gas Connection Size: 1/2" inlet. Thermostatic Control: Micro-adjustable range between 45°C and 300°C Safety Features: Automated pilot valve safety shut-off; when the tank is tilted/lifted, burners drop down to a pilot-only mode and automatically re-ignite when lowered back into place. 🚰 Water & Electrical Supply Requirements Water Connection Size: 1/2" cold water inlet Water Supply Pressure: 50 to 300 kPa Water System: Integrated swivel water fill tap built into the top surface for automated pot filling and seamless cleaning. Electrical Feed: Requires a basic 230V / 1-phase supply solely to power the easy-light electronic ignition and internal control array.