Used Marelli Rotary Ups System 1000 Kva for sale (59,217)

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Knodjhkzu Ajpfx Adyec Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Year of construction: 2022, condition: good (used), PLP MT100 Paddle coating machine Kjdpsz I Dtfsfx Adysnc 2022, Stainless, The coating system MT is a complete machine able to mix in line pellets, kibbles, and other granulated products with additives such as liquid enzymes, fat, digest, aromas, oil, medicines, vitamins, complete with two shafts and adjustable paddles to mix and hold the product, capacity up to 50T per hour, with twin 5.5Kw motors, with heating, comes with 1500Kg buffer holding tank, infeed conveyor, paddle coater and outfeed conveyor

Condition: like new (used), Year of construction: 2016, Cleaning system type W 60 C Machine body, internal pipe system, switch cabinet and washing basket in stainless steel Combination machine - turntable system with removable turning device and small parts basket - Basket diameter turntable wash basket 600 mm - Usable interior height 370 mm - Basket load rotary plate wash basket 100 kg - Usable interior height 530 mm - Dimensions of small parts basket 375 x 220 x 200 mm Mesh size 12 mm - Basket load small parts basket 20 kg Complete stainless steel design Pump(s) and external piping/fittings Version for operation with Liquids with a density of 1.3 due to reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO flushing (loss of sink) for minimum water consumption Water supply from the operator's mains supply with hot water supply on the machine side Hot air drying 1 x 4 KW Oil skimmer Pumping device/floor flushing with pump and pipe system in stainless steel Ksdpfx Adoq Ewgkjyjnc

Condition: refurbished (used), Year of construction: 2003, operating hours: 7,951 h, functionality: fully functional, total width: 2,450 mm, total length: 7,600 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 9,000 kg, rotational speed (max.): 2,100 rpm, empty load weight: 9,000 kg, year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 205 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit, Hammelmann HDP 402, housed in a WAB container. Similar to, but not a Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 402 PRESSURE STAGE 1: Operating pressure: 880 bar Flow rate: 242 l/min PRESSURE STAGE 2: Operating pressure: 1000 bar Flow rate: 205 l/min Drive speed: 2100 rpm Plunger: d50 mm Drive power: 400 kW with a 442 kW Caterpillar C-15 2CPXL14.6ESK diesel engine Knodpfx Ajipadxsdyec with workshop and changing room. Dimensions L x W x H: approx. 7600 x 2450 mm Weight: approx. 9000 kg Year of manufacture: 2003 Operating hours: 7951 Condition: The high-pressure pump has been fitted with new valves. New batteries. In good used condition.

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Knodpfxjyy U Shj Adyjc Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Knedjy Spclopfx Adyjc Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: used, Domino DPX 1000 Laser Fume Extraction System The Domino DPX laser fume extraction system for your CO2, fiber, and UV lasers effectively filters smoke and particulate residues from laser coding processes, improving product performance and overall equipment effectiveness (OEE): Contaminants that are invisible to the human eye are filtered from the work environment. Protection of the laser system for a longer service life and more reliable performance. Maintaining code quality through a clean laser lens. Manufacturer: Domino Model: DPX 1000 Production volume: 200 to 500 codes per minute Throughput (max.): 320 m3/h (188 cfm) Vacuum (max.): 1143 mm WG Operating hours: 40402 HxWxD: 1060 x 430 x 500 mm Weight: 55 kg Kodpfxevi E A Dj Adysnc You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Knsdpfx Aeynnlisdyjc Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: excellent (used), working width: 240 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 240 mm, working height: 160 mm, total width: 240 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, Weinig Unimat 1000 with grooved table Working width: 240 mm, working height: 160 mm, 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 RPM 2-Right (7.5 kW) 7000 RPM 3-Left (7.5 kW) 7000 RPM 4-Top (7.5 kW) 7000 RPM Knedpfx Aszbz Ukedysc 5-Bottom (5.5 kW) 7000 RPM Feed rate: 4 kW / 6-36 m/min, one driven roller in the table at the outlet.

Condition: good (used), Year of construction: 2006, FERAG SNT-U for rotary trimming of printed products Knedpfxjtk S Ilo Adysc

Condition: new, machine/vehicle number: QEP-M029, fuel type: diesel, motor manufacturer: Perkins 404J-22G, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 1.430 kg Functional Generator capacity: 22 kVA Dimensions of cargo space: 220 x 120 x 184 cm CE mark: yes Other information Fuel consumption: 5.2 Liter/Hour at 75% Load Generator: Mecc Alte ECP28-L/4 Knodeynfp Eepfx Adyjc Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 500 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Kjdpeq Igyvjfx Adyjnc Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm Kodpfx Adondk N Aeyenc - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 6 V, NEW AUTOMATIC SACKING MACHINE (P SYSTEM Automation) FOR PELLETS – COMPLETE WITH FEEDING SCREW AND CONTROL PANEL For sale is a new automatic sacking machine (exhibition model), designed for packaging pellets and other granular materials into bags formed directly from plastic film on a roll. This solution is suitable for both integration into existing pellet production plants and for new packaging lines. Composition of the supply: • New automatic sacking machine with product weighing and dosing system. • Inclined feeding screw. • Screw designed for connection to a suction and dust extraction system. • Control unit. • Conveyor belt for discharging packaged bags. Operation: The packaging cycle is fully automatic and includes: Knodpfsz Sc Acex Adyjc • Bag formation from plastic film on a roll. • Weight-based dosing of the pellets. • Bag filling. • Vertical and horizontal heat sealing. • Automatic cutting. • Discharge of the finished bag onto the discharge conveyor. The machine is designed to be operated by a single operator. Main technical features: • Indicative productivity: up to 200 bags/hour. • Maximum bag weight: 25 kg. • Bag width: 350–500 mm. • Bag length: 500–700 mm. • Packaging material: plastic film on a roll. • Film thickness: 60–120 microns. • Electrical supply: 400 V – 50 Hz. • Installed power of the sacking machine: 6 kW. • Control system: touch screen panel. Integration options: Upon request, the supply can be completed with: • KIT FOR CREATING FOLDED CORNERS ON THE BAGS • Pellet storage hopper of various capacities. • Suction and dust extraction system. • Automatic palletizer. • Pallet wrapper. Supply conditions: New machine, not used or reconditioned. Under manufacturer's warranty. Supply terms: Ex Works – Cremona, Italy.

Condition: used, Dimensions: 2430x2400x2730 mm Trolley dimensions: 800x1000 mm Capacity: minimum 180 baguettes Kodewxl R Eepfx Adyjnc Usable baking surface: 32 m² Burner location: Top Model: R1016-6 / 4130901 Iedcowxl R Esu T Rxijii Power: 5.0 kW Voltage: 400 V Year: 1996 Gas burner

Condition: new, power: 850 kW (1,155.68 HP), total length: 6,400 mm, total width: 2,100 mm, total height: 2,640 mm, Year of construction: 2006 Knjdjzx D Rhjpfx Adysc

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Ksdsz Slltspfx Adyjnc Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, -Dimensions: 1700x2870x2500 mm -Trolley dimensions: 1000x800 mm -Number of trays: 14-16 -Useful baking area: 210-178.75 m² -Oven width + controls: 1400+300 -Burner position: Top Knsdpfx Adjwxmtzjysc -Number of decks: 7-8 -Combination of deck oven and rack oven -Reference: LH108HD 9R101028 -Serial number: 5000-110 Ljy Tdjwxmtzexugorr -Power: 3 kW -Voltage: 230-400 V / 50 Hz -Year: 2011 -Sold with gas burner

Condition: like new (used), A stainless steel screw conveyor (in mint condition) for an extraction system upstream of the rotary valve. Knsdpfx Aozzzuijdyjc Technical data: - Length: ~ 530 mm - Diameter: ~ 145 mm

Year of construction: 1979, condition: used, Control box, control unit, pneumatic control Ksdpfeix Ay Eex Adysnc -Manufacturer: Festo, pneumatic control system 1000 -Control no.: 3051 9 -Inlet pressure: max. 14 bar -Operating pressure: 4 - 6 bar -Dimension: 490/410/H945 mm -Weight: 56 kg

Condition: good (used), Year of construction: 1986, functionality: fully functional, Machine Name - Benelli 1000 Tonne press Machine Model - Automatic transfer press PMT/3d/1000/5/1000P Y.O.M 1986 (Retro-fitted 2015 by Helm) Description - 1000 ton SPM up to 26 Number of operational positions: 5 Press bed 5000mm x 2000mm Main carriage 5100mm x 1400mm second carriage Lateral opening between columns: 2500 mm Voltage power supply: 415V; 50 Hz Kedoz Nhx Aepfx Adyjnc Shut height range 730mm- 1070 Light guards Schlechier decolier : Coils up to 10ton and 1.2m wide, ID 500mm OD 1500mm Can be seen underpower from site.

Year of construction: 1988, condition: ready for operation (used), I sell the flader orbital brushing machine. Model Quickwood Fladder Working width 1060mm Mechanically adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Kedpfx Aof Rth Tedyonc Made in Denmark Hansen - Hundebol AS

Condition: new, functionality: fully functional, Year of construction: 2021, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, working height: 650 mm, machine/vehicle number: SM20215245, Equipment: documentation/manual, Well-maintained Lantech C-1000, right-hand stainless steel model, 2011 Stainless steel version Kodpet Dn Hqefx Adyonc Speed: approximately 25 boxes per minute, suitable for right-hand American folding boxes/Fefco 0200/0201 Also available: Lantech C-2000, C-1000, C-300, C-400, CS-300, MFC-2000, hotmelt, Nordson, Robatech.

Condition: ready for operation (used), TETRA PAK COMPLETE FILLING LINE, INCLUDES: - TBA/8-1000 SLIM FILLER, VERSION 120, YOM 2009, 27.000 RUNNING HOURS - CAP30 HELICAP23 100V CAP APPLICATOR Knjdpfx Ajxz Eztsdyoc - TCBP70 WRAP AROUND PACKER, V110 WITH RENOVATED EL. BOX - EASY RIDE ACCUMULATOR - CONVEYOURS SYSTEM EXCELLENT CONDITION, STILL RUNNING

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. ✅ Model - LCWS. Kodexd Thmopfx Adyenc ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.