Used Maweg Typ Saturn D for sale (47,597)

Condition: excellent (used), CATALOGUE NUMBER 7964 TECHNICAL DATA - max. width of workpiece: 630mm Kodpfjzfi E Rox Al Nslu - max. thickness of workpiece: 250mm - top: - toothed feed roller - pressure rollers - pressure pad - toothed feed roller, 2 pcs - pressure pad - 4-knife planing shaft, 630mm, 15kW - pressure pad - smooth feed roller - bottom: - adjustable infeed table - toothed feed roller - 4-knife planing shaft, 630mm, 7.5kW - adjustable feed roller in the bottom table, 2 pcs - electric height adjustment - lifting motor 0.65kW - 6 feed speeds - feed motor 4kW - diameter of dust extraction nozzle 2x160mm - dimensions (L/W/H): 1780x1850x1700mm - weight approx. 3000kg ADVANTAGES - manufactured by the German brand KUPFERMUHLE - very good condition - used planer Net price: 37900 PLN Net price: 9024 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: like new (used), Year of construction: 2023, operating hours: 16 h, Raw material press Purchased to compress cardboard. However, the project was never implemented! Therefore, the press is in like-new condition. Klsdpfx Alozdrf Rs Nou I have attached the original invoice in the documents below.

Condition: used, Year of construction: 2016, functionality: fully functional, The MB Conveyors conveyor belt is for sale: m800/1500 x 245 mm Task: 800 mm Inclined belt: 1500 mm Usable width: 245 mm Center distance: 315 mm Belt speed: 9 m/min High-quality aluminum profile, anodized, with grooves - Rubber-coated drive roller - Aluminum side guide, 50 mm high - PU conveyor belt with cleats, 30 mm high, every 400 mm, temperature-resistant from -10°C to +90°C - Worm gear motor, 3 x 400 V, 50 Hz Kljdpfx Aezbxplsl Nju - Belt speed constant at approximately 9.0 m/min - Mobile base frame, with adjustable angle from 25° to 50°, discharge height at 25°: 650 mm, at 50°: 1,150 mm - Grounding connection - Motor protection switch with 5 m cable & CEE plug

Condition: used, power: 237 kW (322.23 HP), gearing type: other, mileage: 443,736 km, driver cabin: other, Vehicle location: Bovenden, body: 5 - cylinder in-line engine, D2865 LF 06 MAN engine, 5 - cylinder in-line engine, type D2865 LF 06, engine number: 2486892020D111, liners are leaking, engine block is in order, engine from MAN F10 26.322 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Klsdpfx Aovhhaisl Nsu - .

Condition: used, mileage: 12,000 km, power: 103 kW (140.04 HP), first registration: 01/1950, fuel type: diesel, axle configuration: 4x2, color: grey, driver cabin: other, gearing type: mechanical, Year of construction: 1950, Vehicle location: Bovenden, Kjdovhgzrjpfx Al Nolu Body: 3-sided tipper body Vomag body type H6, 6 cylinder engine VEB Dieselmotorenwerke Schönebeck / Elbe, restored collector's vehicle, vehicle was assembled from parts of the 40s and 50s, year of construction can therefore not be determined exactly !!! ACCESSORIES WITHOUT WARRANTY, subject to changes, prior sale and errors! - .

Condition: used, mileage: 12,000 km, power: 103 kW (140.04 HP), first registration: 01/1950, fuel type: diesel, axle configuration: 4x2, color: grey, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 3, Year of construction: 1950, Equipment: cabin, Vehicle location: Bovenden, If you have any questions, please call ! Color: grey Leather: red Vomag body type H6, 6 cylinder engine VEB Dieselmotorenwerke Schönebeck / Elbe Restored collector's vehicle Vehicle was assembled from parts from the 40s and 50s Kjdpfxovhg Sdj Al Njlu Year of construction can therefore not be determined exactly !!! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! - .

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Engine: 6-cylinder inline engine, type 520D6T, H64 Henschel engine, 6-cylinder inline engine, type 520D6T, H64, engine number: 123907. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Kedpfxoi Rnvrj Al Njlu

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Klsdjzd Da Tepfx Al Nou Table size: 3,000 mm x 2,500 mm Option: External blowing air Kinematics: Fork head

Year of construction: 2001, condition: used, 800 kVA transformer substation, year of manufacture 2001, 10/0.4 kV, oil-filled transformer, manufacturer: ELIN, OS/US porcelain bushings. Kledpfx Asza Urmel Nsu

Condition: used, Year of construction: 1985, functionality: fully functional, 3150 kVA oil transformer, 20500V – 5 taps/6600V, with oil conservator, Buchholz relay, dial thermometer, Dyn5, year of manufacture 1985, make Asea Lepper, type DOHH Klsdpsw In Htefx Al Nou

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Fooke Endura Type 8. Year of manufacture 1999, Siemens 840 D Powerline control, X/Y/Z travel 3000/2500/1150 mm, Bridge height 800 mm, Kodpfxev N Uuvs Al Nolu 23 kW milling spindle, Forked milling head with 365° rotation axis, Swivel axis +/- 100°, Feed rates up to 15 m/min, Spindle speed up to 16,000 rpm, HSK A 63, Electric handwheel, Machine weight 50,000 kg

Condition: as good as new (ex-display), Semiconductor protection Make Klöckner Moeller Type DIL SM 16 V-k 400 Volt 16 A 7,5 kw Kodpfemxi U Sox Al Nolu unused from stock

Condition: used, Year of construction: 2010, Charger Kedpfxjy Up U To Al Njlu

Condition: used, Charger Kledpfxey Up Uye Al Neu

Condition: used, Charger Kljdpoy Up Utefx Al Nou

Condition: used, Year of construction: 2006, Charger Ksdpey Up Umofx Al Njlu

Condition: new, machine/vehicle number: C-CL-360-FR-EC, functionality: fully functional, input voltage: 230 V, volume flow: 390 m³/h, noise level: 58 dB, total height: 1,190 mm, total length: 900 mm, total width: 550 mm, warranty duration: 12 months, Equipment: type plate available, ISI C-CLEANER Mechanical air filter device Type: 360 FR Design: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating gas and solids. TECHNICAL DESCRIPTION: Air volume: - 390 m³/h (free blowing) - 360 m³/h (effective) (depending on the filter configuration without capture elements) Ksdpfxovrw T Hs Al Nelu Air inlet: with baffle plate as pre-separator Filter configuration: - Filter cartridge made of polyester fleece (dust class M) - Pre-filter mat G4 - Suspended matter filter H13 - Activated carbon cassette refillable with 3 kg In order to achieve a consistent suction power, the filter cartridge can be cleaned at regular intervals using compressed air via a ball valve. Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 58 db (A)) Dimensions: length 900 mm / width 550 mm / height 1190 mm

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable king pins and 2 king pin positions Container receptacles: Included Rear extension retracted: 1 x 20 ft, flush with the rear, note: low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with gooseneck tunnel and rear overhang Without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. Plug adapter for front locking, to secure containers without a tunnel from below, with bracket when not in use Rear extension on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underride protection Extendable underride protection for 45 ft containers Half-shell fenders, included with anti-spray flaps according to EC regulations Rear impact guard Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons total train weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line compressed air braking system Color-coded lines for easy servicing 200 spring-loaded parking brake 2 keyed coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with raising and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! In some towing vehicles, false diagnoses may occur, even though the function is working) Klodpei Ri Eqsfx Al Nou 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole keyed sockets at the front, without connecting cable Operating Instructions When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from king pin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underride protection must be manually extended! An exemption permit according to § 70 StVZo is required! Registration Country/Signs Germany with DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder 390 contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame hot-dip galvanized including passivation 15-year warranty against rusting Support legs black coated

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-spray flaps according to EG Rear impact protection Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport), up to 44 tons gross vehicle weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System Kjdsi Rizuspfx Al Nolu 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, the truck must be appropriately prepared Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front Operating Instructions Special permit required if the overall train length exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / Signage Germany Type approval according to EG 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape

Condition: excellent (used), Automatic filling system Logdos Späth GmbH Type K-DOS.F/AL 40/EX for filling liquids into buckets, jerricans, IBCs and drums ATEX-protected mobile, can be moved on rollers compact dimensions: 3m x 2m x 2m (L x W x H) Programmable X/Y axis and palletizing Very good condition, directly from production!!! Klodpfxjiyytqj Al Nou

Year of construction: 2013, condition: not inspected (used), Number of sanding units 4 st. sanding width max. 200 mm Sanding height max. 7-150 mm Working speed 8-16 m/min Band Speed 18-30 m/sec Stähle-Hess Sanding Machine Saturn-Duo ----- Manufacturer's Technical Description: Stähle-Hess Finish Sanding Machine, Model Saturn Duo Featuring 2 sanding units, plus additional upper and lower Roto-Finish sanding units. 1 Upper sanding belt 1 Lower sanding belt 2 Upper Roto-Finish sanding units 2 Lower Roto-Finish sanding units Workpiece Dimensions Height: 7–150 mm Width: max. 200 mm Minimum length: 300 mm Belt speed: 18–30 m/s (variable) Feed rate: 8–16 m/min (variable) Ksdpfxey Spvlj Al Nelu ----- Price for the above-mentioned machine available upon request! ----- Note: This machine was previously used in conjunction with a Weinig Variomat four-sided planer/moulder (see Stock No. #7007). (Technical specifications provided by the manufacturer – subject to verification!) All listed prices are net, plus applicable statutory VAT.

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Availability: by arrangement; currently being overhauled at Ganner factory Kedpey Ih Sksfx Al Nslu Location: Austria

Condition: used, Year of construction: 1974, machine/vehicle number: 4139, functionality: fully functional, pressing force: 80 t, stroke length: 140 mm, table width: 530 mm, table length: 750 mm, ram plate width: 335 mm, ram plate length: 440 mm, Equipment: documentation/manual, For sale is a robust eccentric press from Beutler Maschinenbau with approximately 80 tons of pressing force. The machine is ideally suited for punching and forming operations. Kljdpfjzb Eaqjx Al Nsu Specifications: • Table area: approx. 750 x 530 mm • Ram area: approx. 440 x 335 mm • Ram adjustment: approx. 150 mm • Stroke: adjustable from 20 – 140 mm • Max. installation height: approx. 320 mm • Table opening: approx. Ø 230 mm Sold without warranty, ex works. The machine will be delivered without electrical power and compressed air connection. Payment before collection.

Condition: good (used), 1. DEMAG drum brake Type: TH806/60 - RT315 TH806 1 piece available. 2. ELDRO electrohydraulic lifting device Ed 1250/60 Kledpfsu Uvmfjx Al Nju

Year of construction: 2021, condition: excellent (used), Richel irrigation and fertigation system with 4 vertical centrifugal pumps WILO type: Helix. Mixing unit : 12m3/h Kodpfxoupwhzo Al Nslu 1 wastewater treatment plant make : UVGERMI Type: 3XAD300. with water filter Hectron AG 100 1 fresh water tank capacity : 1.900L. 2 x water tank capacity : 3000L