Used Mbo K55/4 Ktl for sale (58,805)

Condition: ready for operation (used), MBO Folding Machines Njdoir A Imopfx Abujlh MBO ET46 bump turn -1983

Condition: ready for operation (used), Flat pile feeder Touch screen navigation control with auto set plates rollers 4 plates 2 knives Side pocket Nodpowt Eqbjfx Abuslh SAK stream shingle belt delivery

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver Nledjlthguopfx Abujh * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Nedpfx Aboz Dmn Rjuslh Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: used, machine/vehicle number: 980117384, Vertikalstapelauslage - Vertical Stack Delivery with Pressing and Marking Device MBO SAP46L Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Nlodpfx Ash Axqfebujh

Year of construction: 2016, condition: ready for operation (used), - USED - CO2 TUBE LASER CUTTING MACHINE WITH LOADING/UNLOADING SYSTEM MAX CUTTING THICKNESS: 16 mm mm MIN CIRCULAR SECTION: 80 mm MAX CIRCULAR SECTION: 610 mm MAX SQUARE SECTION: 400x400 mm MAX RECTANGULAR SECTION: 500x300 mm SOURCE: ROFIN DC045 ; 4500 W CONTROL UNIT: SIEMENS 840D WEIGHT: 100000 Kg ACCESSORIES: FUME EXHAUSTER NOTE: LENGTH OF LOADING BAR MIN.4.000-MAX 18.000 mm; LENGTH OF UNLOADING BAR MIN. 3.000 - MAX 12.500 mm; SHORT PIECE UNLOADING LENGTH UP TO 3.200 mm; 3D HEAD; CAPACITIVE SENSOR; AUTOMATIC SETTINGS; BOOSTER; FOCUS AUTOMATIC ADJUSTMENT. MACHINE REVISED BY BLM ADIGE BEFORE DISMANTLING Njdpfsytkdljx Abuslh

Condition: used, Year of construction: 2006, Kombi-Falzmaschine - Combination Folder Heidelberg-Stahlfolder KH78-4KTLL Year 2006 - Serial-No. 0-00256 Nlsdpep Symgofx Abueh Palettenanleger / Pallet Feeder PFH-82 Format / Size min. 140 x 180mm Format / Size max. 780 x 1280mm Falztyp / Folding Type: 4 buckles - 3 knives Automatische Falztascheneinstellung / automatic buckles setting Speed 50.000 Cycles/hour Digitaler Bildschirm / Digital Display Auslage / Delivery Heidelberg SAK-94.H Inklusive Kompressor / include Compressor Inklusive Handbücher / Included Manuals Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 2007, Additional Machine Details: Automatic buckles and roller Navigator control 1st unit : 6 motorized buckles Nljdoza Ugdopfx Abush Batch counter Noise hood Round Pile Feeder Till 230 meter per minute

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Nljdpetk N Dkefx Abush

Condition: used, Year of construction: 2019, machine/vehicle number: 604.11.059.19, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 200 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, total length: 3,200 mm, total width: 450 mm, total height: 1,200 mm, overall weight: 1,200 kg, table height: 1,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Felder Kappa 550 circular saw, 0-45 degree swivel, maintenance-free, saw blade D=250mm-550mm Nljdj Ad Ituopfx Abush Extension arm 1250mm x 650mm, cutting length 3200mm, crosscut function. Kappa 550X - motion control with LCD screen with touch function...etc. Circular saw table extension 1620mm Additional light, scoring unit, red LED strip marks the danger area. Scoring unit Control with 3 controlled axes. Cutting width 1250mm, aluminum, anodized. Controlled parallel fence 1250mm Sliding table 3200mm Rip fence 3200mm with 2 fence blocks, digital The machine was used in a two-person business and has hardly been used for the past 2 years. The saw was only used for fine work (not for carpentry). Selling due to retirement. If interested, please request more information.

Condition: excellent (used), Year of construction: 2012, operating hours: 1,800 h, FEELER VMP-1100 CNC Vertical Machining Centre with NIKKEN CNC202 FA 4th Axis Year 2012 Control FANUC 0i-MD Table size 600 x 1200 mm Travels XYZ 1100 x 610 x 600 mm Spindle nose to table 137 - 735 mm Spindle centre to column 660 mm Spindle speeds to 10000 rpm Spindle taper BT 40 Spindle motor 18.5 kW Number of tools 30 ATC Rapid traverse X & Y 36 m/min, Z 24 m/min Weight 6800 kg Supplied with: BLUM Tool Probe, Swarf Augers, Rear Swarf Conveyor, Spindle Chiller, Filtermist FX5002, Tooling Package. NIKKEN CNC202 FA 4th Axis complete with 200 mm Diameter Faceplate, 135 mm Centre Height, 115 mm Riser Block, Tailstock and Mounting Sub Plate/Table. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27003 Machine Serial Number: VNJ1074 Nljdpfx Aez R Tn Hobuoh Cost: £34,950.00 + VAT

Condition: used, mileage: 874,000 km, power: 324 kW (440.52 HP), first registration: 10/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space volume: 118 m³, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * MAN TGX 26.440 6x2 Jumbo articulated truck, 118m³ capacity, 3+2 axle configuration, with through-loading system * Euro 6 compliant * Automatic transmission * Intarder * ACC (Adaptive Cruise Control) * LGS (Lane Guard System) * XLX cab * Sliding tarpaulin body Nledpozkyiwsfx Abuoh * Dimensions: L 7.30m x W 2.50m x H 3.05m * Edscha sliding cover * Hudach sliding cover * Portal doors * Low coupling * Aluminum rims * Air suspension * Auxiliary air conditioning * Automatic climate control * Auxiliary heater * Navigation system * Refrigerator compartment * EFH (Extended Fifth Wheel) * RUFA 2-axle Jumbo trailer * Year of manufacture: 2013 * Dimensions: L 8.15m x W 2.50m x H 3.10m * Edscha sliding cover * Liftable roof * Air suspension * Portal doors * Twin tires * Aluminum rims * EBS (Electronic Braking System) * ABS (Anti-lock Braking System)

Condition: excellent (used), We have several adjustment sets, all fully functional. Nlsdpfxsyrd S Ts Abueh

Condition: used, mileage: 674,000 km, first registration: 05/2020, fuel type: diesel, fuel: diesel, Year of construction: 2020, DAF XF 530 FT 3-axle Euro 6 SuperSpaceCab (SSC) MEGA/LOW semi-trailer with MEUSBURGER 4-axle gooseneck flatbed trailer for special transports, up to 5 m wide DAF tractor unit features: • Euro standard: EURO 6D • Power: 390 kW / 530 hp • Engine displacement: 12,902 cm³ • SuperSpaceCab (SSC) cab • ZF Intarder • AS-Tronic 12-speed automatic transmission • Brakematic • ABS/ASR/EBS • EBV • ESTEPE (2nd axle): Leading/Steering/Lift axle! • Adaptive cruise control • Lane departure warning system • Brake assist system • Collision warning system • BRIGADE turning assistant • Differential lock • TC traction control • Hill start assist • Full air suspension • Cab spoiler • Automatic climate control • Auxiliary heater • Navigation system • TV • Microwave • CB radio • Multifunction steering wheel • Driver airbag • Leather seats • Driver and passenger comfort seats • 2 bunks • Stainless steel diesel tank: 600 liters Nlsdpfx Aezyz U Hobuoh • Tire size: 1st axle: 355/50 R22.5 2nd axle: 235/75 R17.5 3rd axle: 295/60 R22.5 • Tire tread depth: 13/13 8/8 10/11/10/11 mm • Wheelbase: 3,800 mm • Unladen weight: 9,120 kg • GVWR: 23,900 kg • Technically possible gross combination weight: 50,000 kg / 68,000 kg • Vehicle dimensions (external): 6,200 x 2,550 x 3,950 mm MEUSBURGER - Special trailer • Year of manufacture 2016 • Trailer can be widened to 5 meters electrically and pneumatically • No vehicle hydraulics required - the vehicle has an electro-pneumatic pump! • Internal height: 3,250 mm (3,730 mm possible!) • External dimensions: 13,810 x 2,550 x 4,000 mm • Internal dimensions: 13,480 (gooseneck 3,480 mm + low bed platform 10,000 mm) x 2,490 x 3,250 mm • EDSCHA tarpaulin • Electric/hydraulic lift roof • Anodized/galvanized frame! • Sliding lashing points • 2 x lashing rail on the side • 2 x lashing rail in the middle • 2 x 9 folding lashing rings on the side on the low bed • 2 x 4 lashing rings in the gooseneck • 4 x twin-tired and air-suspended BPW - ECO PLUS axles • Electrically steerable • Disc brakes • Aluminum rims • 1st axle can be lifted • 3rd + 4th axles are steerable - friction-steered! • Tire size: 205/65 R 17.5 • Tire tread depths (per axle): 10/10/11/10 ; 10/7/11/10 ; 6/6/10/11 ; 9/10/8/7 mm • BEKA central lubrication system • GVWR: 38,800 kg • Unladen weight: 11,250 kg • Payload: 42,000 kg - German vehicles! - SERVICE BOOK KEPT UP TO DATE: all services performed at DAF!! - 1st owner! - TÜV/MOT inspection and emissions test on request and for an extra charge: new! Errors and prior sale excepted!

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Nedpoz Iz Sfsfx Abuslh Turnover / straight-through module Transfer conveyor Shingled delivery conveyor 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Integrated vacuum system Interlocked safety guarding Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Secondary rotary pick & place feeder Secondary product size: 54 x 54 mm to 150 x 150 mm Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Air requirement: 4.1–7 bar

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 02/2016, loading space length: 13,610 mm, loading space width: 2,470 mm, loading space height: 2,690 mm, total length: 13,870 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,050 mm, color: red, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 2: Max. axle load: 9000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 9.120 kg Carrying capacity: 22.880 kg GVW: 32.000 kg Functional Tail lift: Dhollandia DHSMR.20, slider lift, 2000 kg Make of bodywork: Groenewegen Jumbo Plywood Box Nljdpfszw A Icjx Abueh History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 04 24446, Folder incl.: Paper format: 760x1100mm Maximum speed: 180m/min 6 cassettes 2 knives 1 side cassette after the knife Pallet loading MBO SBAP-82ME stacking press Nedsztp Axopfx Abuslh SBAP 46 ME sheet press stacker delivery unit

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, operating hours: 9,495 h, load capacity: 6,000 kg, lifting height: 4,000 mm, free lift: 325 mm, fuel type: diesel, construction height: 2,900 mm, motor manufacturer: Perkins, Equipment: cabin, lighting, Diesel Sideloader JUMBO J/SHP60/15/40 Year of manufacture: 2004 According to hour meter: 9,495 hours Perkins engine 6 ton lifting capacity 4 metre lift height 2.90 metre overall height 1.50 metre fork length - Full cab with heating and radio - Lighting system - Immediately operational! Nodeyk Tc Sjpfx Abuslh - MADE IN AUSTRIA! Sale price: €13,500 net Low-cost delivery available!

Year of construction: 2008, condition: used, Kombi-Falzmaschine - Combination Folder Heidelberg Stahlfolder KH82-4KTLL32 Seiten Seitenfalz - 32 pages cross Fold Nledpfx Abjrp En Ueuoh Year 2008 - Serial-No. 0-00256 Palettenanleger / Pallet Feeder PFH-82 Format / Size min. 140 x 180mm Format / Size max. 820 x 1200mm Falztyp / Folding Type: 4 buckles - 3 knives Automatische Falztascheneinstellung / automatic buckles setting Speed 50.000 Cycles/hour Digitaler bildschirm / Digital Display Inklusive Kompressor / include Compressor Inklusive Handbücher / Included ManualsAuslage / Delivery Heidelberg SAK-94 Year 2006 - Serial-No. 0-00421 Arbeitsbreite max. 940mm / Working width max. 940mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2026, operating hours: 100 h, condition: new, functionality: fully functional, Maximum jumbo roll width: 450 mm Maximum jumbo roll diameter: 1000 mm Maximum rewinding diameter: 500 mm One rotary die-cutting unit Die-cutting (roll-to-roll): 120 m/min Compatible with magnetic cylinders from 12" to approximately 24" Optional features not included in the offer price: Magnetic cylinder holder: Adaptable to existing die-cutting units. iKnife Automatic knife positioning system: Available as an additional option. Contact us. We will be happy to provide you with a detailed quotation. Nlodpfjvq I Niex Abueh

Year of construction: 2004, condition: used, Emmegi Comet Isola, 4 Axis CNC Vertical Machining Centre for Milling, Drilling and Tapping Aluminium with Emmegi CNC Control (Isac Cam Editor), Bed Length 6800mm, X Axis 5500mm, Y Axis 525mm, Z Axis 380mm, Pneumatic Vices and Auto Vice Positioning. S/No. M271748 (2004) Machine Weight 5300kg Nljdpfxjz Rnwzj Abush Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, first registration: 07/2020, empty load weight: 2,840 kg, maximum load weight: 15,160 kg, overall weight: 18,000 kg, tire size: 445/45 19,5, tire condition: 60 %, axle configuration: 2 axles, color: black, driver cabin: day cab, emission class: none, suspension: air, Year of construction: 2020, front tire size: 445/45 19,5, rear tire size: 445/45 19,5, Equipment: ABS, truck registration, Vehicle number for inquiries: 41937 Krone, AZW 18 * Year of manufacture: 2020 * ABS, Anti-lock Braking System * EBS, electronic brake system * Air suspension * Maxi trailer * 7.15 * 7.45 * Spare tire holder * Lifting and lowering device * Other * Suspension: Air * Total weight: 18,000 kg * Unladen weight: 2,840 kg * Payload: 15,160 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 60% - 60% - Tire size: 445/45 R19.5 * Tire condition 2nd axle: 60% - 60% - Tire size: 445/45 R19.5 * Tire sizes: 445/45 R19.5 * Lowering height: 1320mm * AZW 18 * BDF trailer * Driving height: 1080 mm * For lowering heights of 1120mm and 1320mm * Lifting height: 1000mm-1390mm * Extendable drawbar Disclaimer: Subject to changes, prior sale and errors. More photos and videos can be found on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates/customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please ask our trained specialists; we will be happy to advise you. Njdps Aa Ifvjfx Abuslh

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, working width: 720 mm, Equipment: compressor, Pallet stacker Nljdpfx Abjzhh Tfeueh MBO MC Control system with independent control Double-sheet control Printing - vacuum pump

Condition: used, first registration: 06/2016, empty load weight: 1 kg, maximum load weight: 17,999 kg, overall weight: 18,000 kg, tire size: 255/60 19,5, tire condition: 30 %, axle configuration: 2 axles, color: black, driver cabin: day cab, emission class: none, suspension: air, Year of construction: 2016, front tire size: 255/60 19,5, rear tire size: 255/60 19,5, Equipment: ABS, truck registration, Vehicle number for inquiries: 42006 Krone, ZZW 18 * Year of manufacture: 2016 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Jumbo tandem trailer * 7.15 * 7.45 * 7.82 * Duomatic air coupling * 15-pin connecting plug * Lifting and lowering device * Rear support * Other * Suspension: Air * Gross vehicle weight: 18,000 kg * Tare weight: 1 kg * Payload: 17,999 kg * Permissible gross vehicle weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 30% | 30% – 30% | 30% - Tire size: 255/60 R19.5 * Tire condition 2nd axle: 30% | 30% – 30% | 30% - Tire size: 255/60 R19.5 * Tire sizes: 255/60 R19.5 * Lowering height: 980 mm * Lifting range: 840 mm to 1350 mm * Height-adjustable twist locks Disclaimer: Subject to changes, prior sale, and errors excepted. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists; we will be happy to advise you. Nodps Aa Iggsfx Abuolh

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,100 kg, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,325 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – 3-Axle Turntable Combination Trailer for Roll-Off Containers & Machinery Transport * High-tensile steel welded chassis construction * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Adjustable and removable longitudinal guide rails, approx. 115 mm high * Heavy-duty turntable with ball-bearing slewing ring * Recessed mushroom lashing points on the top and sides of the outer frame, each rated at 5 tonnes * Integrated stake pockets in the outer frame (internal dimensions: 70 × 40 mm), convertible to 5-tonne lashing rings * Wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Quarter mudguards * Spare wheel carrier including mounting kit * Spare wheel matching the standard tyres, mounted on a steel rim * Lockable plastic toolbox with drawer and shelf insert, dimensions: 650 × 520 × 670 mm (W × H × D) ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * Drum brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 235/75 R 17.5 tyres * Twin steel wheels, factory silver finish ### Braking System * Dual-line compressed air braking system Nodpfx Abjzhf Aksujlh * Spring-loaded parking brake * Electronic Vehicle Stability Control System * Duomatic air coupling at the front with connecting line to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 1 × 15-pin front connector with connecting cable ### Loading Platform * Steel floor * Recessed front roller channel for roll-off containers * Suitable for roll-off containers from 5,000 mm to 7,000 mm in length ### Loading Ramps * Lockable storage compartment for loading ramps beneath the loading platform * Reinforced access hatch suitable for driving over * 1 pair of aluminium loading ramps, approx. 3,000 mm long and 450 mm wide * Load capacity: 14,000 kg per pair ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Surface Protection & Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.