Used Meat Press for sale (14,108)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Hfsdoy R Nnfjpfx Apnjg Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, workpiece height max. 2.320 x 1.010 mm output 33 kW Hfsdpew Na Ulefx Apnjg Available 2 Stück Orma PM/AFT membrane press for coating single-sided profiled workpieces with automatic loading and unloading system

Condition: new, Year of construction: 2024, Bending capacity: 60t Bending length: 1250 mm Distance between uprights (mm): 1050 Material thickness: 7.5 mm Stroke length (mm): 265 Throat depth: 410 mm Installation height: 530 mm Operating speed Y (mm/sec.): 10 Motor power (kW): 7.5 Operating speed X (mm/sec.): 250 Length (mm): 2300 Width (mm): 1550 Height (mm): 2750 Weight (kg): 3,100 Standard equipment: Y1, Y2, X, R (4 axes) X = 650 mm X, R Control unit: DURMA DT15 European clamping system 60 mm die holder (only for European dies) Throat depth: 410 mm Backgauge: Siemens DC servo-driven, linear guide & ball screw system Protective cover Special accessories: European upper tool P97.75.R08 (one in segmented design) European lower tool M.460R.85 (one in segmented design) DURMA quick clamping system Hfsded E If Sjpfx Apnsg CE with manual F.AKAS II M -FPSC-B-C + safety cover & switch Other machines are available for demonstration at our Staufenberg location. Further information available upon request.

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: 2024 (new) Control system: DT 15 Bending length: 4050 mm Distance between the columns: 3600 mm Y fast Speed: 100 mm / s Y Working speed: 10 mm / s Y Retraction speed: 100 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Projection: 450 mm 2 support arms 2 back gauge fingers Travel speed X-axis: 350 mm / s Hfedpfxsff Hvls Apneg Travel in X-axis: 750 mm Travel speed in R-axis: (max.) 300 mm / s Travel distance R-axis: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor and linear guide and ball screw thread Stop finger back gauge with height adjustment (R-axis, manual) CE die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, in accordance with global standards Electrical equipment, in accordance with global standards Option: CE certified Motorized crowning and X & R backgauge Engine power 37 kW Oil tank capacity 250 lt Length 5300 mm width 1910 mm Height 3230 mm Weight approx. 20000 kg

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data: Bending force: 600 tons Hjdpfx Apefir U Nenjfg bending length: 6050 mm passage between the uprights: 5100 mm stroke: 365 mm Installation height: 700 mm Projection: 510 mm table height: 990 mm table width: 154 mm Y High speed: 80 mm Y Working speed: 7 mm/sec. Y retraction speed: 80 mm/sec. X axes working speed: 350 mm/sec. R axes working speed: 300 mm R Axes travel distance: 250 mm X axis distance: 750 mm Engine power: 55 kW length: 8050 mm width: 3200 mm height: 4250 mm Weight: 72000 kg Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment Control unit - ModEva Premium , 69T and 66T CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes Bil0h3uvee R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement

Condition: new, Year of construction: 2024, Are you looking for a powerful press brake that can meet even the most demanding requirements? Then the Durma AD-S 803000 press brake with 3000 tons of pressure could be the perfect solution for your needs. With an impressive length of 8 meters and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with the highest precision. The installation height of 1000 mm allows flexible and comfortable positioning of the workpiece. Hfsdpoi Da Sysfx Apnog The heart of the machine is the DELEM-DA 66T movable control system, which ensures intuitive operation and precise control of the workflow. In addition, the press brake is a special design and can be configured according to customer requirements to meet all individual needs. If you are interested in Durma press brake, we are at your disposal for personal consultation. Other machines are also available and can be visited. Feel free to contact us for more information and let's find a customized solution for your needs together. Control type: DELEM DA-66T Protection oil: suitable for sea transport Front safety system: FPSC (MANUEL) Sheet metal support system: sliding support arm Stroke: 750 MM Backgauge type: X=1500 X, R Overhang:1050 MM Crowning: Hydromechanical Installation height: 1000 MM Power: 400V 50HZ Body type: Welded frame Under tool holder: DURMA Wide

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm Hfedpfjfifg Hsx Apnjg table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: new, Year of construction: 2024, Press brake AD-S 40220 | 4 meters 220 tons Everything can be configured on request, very short production and delivery times. We will be happy to send you further information on request. Technical data: Bending capacity: 220 tons Bending length (mm): 4050 Passage between uprights (mm): 3600 Stroke (mm): 265 Installation height (mm): 530 Projection (mm): 410 Table height(mm): 900 Table width(mm): 104 Y Rapid traverse (mm/sec.): 160 Y Working speed(mm/sec): 10 Y Retraction speed(mm/sec.):140 X axles working speed(mm/sec.): 250 R axes working speed (M): 140 R axes travel distance: 250 X axes distance(mm): 650 Motor power: 22 kW Hsdpfx Apofirx Denjfg Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 14750 kg Standard equipment Control system: CNC Cybelec ModEva 19T CNC controlled motorized crowning European tool clamping system / or Durma clamping system on customer request Extended equipment: Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes backgauge: X1,X2,R1,R2,Z1,Z2 Control unit: DELEM DA-66T Delem 66T - 69T or Durma control is selectable DAM - Durma angle measuring system Hydraulic upper tool clamping Wila NSCL-I-HC/UPB - PRO - 180 t/m Hydraulic lower tool clamping Wila NSCR-I-HC-CNC/UPB - PRO Powerpack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation program AP3 & AP4 bending aid 750mm to 1500 mm selectable Parking area for support arms (1000mm) TANDEM preparation Laser bending line Oil heating Manual or motorized central lubrication Air conditioning for control cabinet

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. AD-R 80400 Bending force: 400 tons bending length: 8050 mm Hjdpfjfin N Sox Apnofg With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally renowned manufacturers in their sector, whose products are sold in 120 countries. With the branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here here we are your direct contact person from the ranks of Durmazlar, who will competently assist you with advice and practical support when it comes to machines for sheet metal processing. Our demonstration centre gives you the opportunity to get an overview of our machines on site, to be convinced of the quality and precise technology of our products at first hand and to receive the best possible advice that is geared to your company goals. It is our task to be your direct contact person for you, our customer, on site and to offer you services in the areas of training and customer service. We are now happy to accompany you from Germany - from advice, through the purchase and di

Condition: new, Year of construction: 2024, operating hours: 32 h, Make: DURMA Type: AD-S 30135 Year of construction: 2018 Folding length: 3050 mm Pressing force: 1350 kN Control: CNC DT-15 Operating hours: 0 h Controlled 3 axes: Y1,Y2, X Clearance between the stands: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm (double guide, aluminum) Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 120 mm/s Dimensions L/W/H: approx. 4200x1680x2750 mm Weight: approx. 10250 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 Manual crowning European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Hfedpfodx Rd Nsx Apnog Backgauge: motorized with linear guide & ball screw spindle Backgauge finger height-adjustable, R-axis manual Backgauge motor servo Safety covers on the side CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C+safety cover & switch The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.

Condition: new, Year of construction: 2024, Make: DURMA Type: AD-S 30175 Year of construction: 2020 Folding length: 3050 mm Pressing force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Bcq29blmc8 Controlled axes back gauge: X,R Hsdpfxsd Srk So Apnofg Clearance between the uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Servo motor backgauge Safety covers on the side CE marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC- Controlled axes X,R-axis, Z-axes manually adjustable CNC controlled motorized crowning European upper tool/lower tool from Rolleri The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: new, Year of construction: 2024, High-performance press brake AD-S 40400 from DURMA: A masterpiece of technology! Hsdpfx Ajrwniqspnefg The DURMA AD-S 40400 press brake combines precision, power and efficiency in a robust package designed specifically for demanding environments. This model not only offers outstanding performance and reliability, but also a wide range of high-quality standard features and options that make it an indispensable tool in your production. Technical data: ・Bending force: 400 tons ・Bending length: 4050 mm ・Clearance between the uprights: 3400 mm ・Rapid speed: 100 mm/s ・Working speed: 8 mm/s ・Return speed: 80 mm/s ・Motor power: 37 kW ・Weight: approx. 27,760 kg Features and benefits: ・Control: With the optional DELEM DA-66T touchscreen control for unsurpassed speed and ease of operation. ・Rugged construction: Reinforced frame for loads up to 200 tons ・Flexibility in use: With 2 support arms and a backgauge with two finger blocks and controlled X-axis for versatile applications. ・Advanced motor power: Equipped with AC servo motor for back gauge and ball screws, it provides fast and precise movements. ・Highly advanced safety: Manually adjustable F.AKAS II M CE safety system protects the operator without compromising on performance. Standard equipment: ・Y1, Y2, X (=650mm), R manual (2 stop fingers) ・Control DT 15 ・Manually adjustable F.AKAS II M CE safety system (on ram) (CE) ・CNC crowning ・Support arms with T-slot and spring-loaded folding stop, laterally adjustable on linear guide ・Durma tool system holder ・AC servo motor for backgauge and ball screws ・Shields at the side and rear Options: ・DELEM DA-66T touchscreen control for intuitive operation ・6 axes - Extended X/R/Z1/Z2 X=750 mm backgauge options ・Reinforced frame, designed for a load of 200 tons per 1 meter, total pressing force is maximum 400 tons Price information: ・The price quoted is for the machine only. Tools and freight costs are not included.

Condition: used, Year of construction: 2010, total width: 2,080 mm, total height: 1,900 mm, total length: 2,440 mm, Colour: Grey Briquette press; Höcker Polytechnik BrikStar C 3-19-L 4.3kW, 400V 25kg/h Funnel volume 3m³ Oil tank 50l Dimensions; 2015x2360x1300mm, 830kg - Year: 2010 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 2440mm x 2080mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hjdexqdxcjpfx Apnjfg Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, total width: 1,700 mm, total height: 1,500 mm, total length: 1,200 mm, Colour: Grey Empty weight: 500 kg Price: On request - Details: - └ Description: Set consisting of briquette press with extraction - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: 2012 1140 - Transport dimensions: 1200mm x 1700mm x 1500mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hfjdpfx Apjyy Rt Uenjg Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, operating hours: 854 h, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Colour: Grey Empty weight: 800 kg Price: On request - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5037411-000150 - Operating hours: 854 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 2 Hfjdpfoxan Utox Apneg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1986, total length: 1,500 mm, total width: 1,450 mm, total height: 2,900 mm, Colour: Grey Empty weight: 5.500 kg Price: On request - Year: 1986 - Documentation available: Yes - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information Hfodpfx Apsylb Edjnog VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total length: 3,200 mm, total width: 1,500 mm, total height: 2,100 mm, Colour: Green Weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: - Drive system: Conventional - Power [kW]: 11.0 - Press force [ton]: 100 - Max. working width [mm]: 3100 - Column gap [mm]: 2700 - Backgauge depth [mm]: 700 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3200mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information Hodpfxey Rrdce Apnofg VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1991, Colour: Grey High frequency press Brand: Italpresse Type: GB/13 Max pressure: 120T Pressing area 2500x1300mm Pressing height 200mm 6 cylinders diameter 90mm Hfjdpfxewng Tmo Apnog Speed 12m/min. Complete line with loading system, gluing machine, destacker and High frequency cabinet (separate for sale) Machine needs some maintenance. Probably the PLC lost his parameters, and some small parts needs to be changed.  - Details: - └ Description: Exclusive High-frequency cabinet - Year: 1991 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 3,950 mm, total width: 1,500 mm, total height: 2,150 mm, Colour: Green Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Serial number: 19198 - Main motor power [kW]: 1.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3100 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 390 - Total stroke [mm]: 390 - Number of work zones [pcs]: 3 - Number of levels [pcs]: 3 - Plate material: Wood - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 80 - Total pressure [Ton]: 160 Hjdpfx Apey Rq Efjnofg - Options: Disable partial cylinders - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 1.1 - Transport dimensions: 3950mm x 1500mm x 2150mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2011, Used 3.6 meter CNC press brake from Haco Hfsdpfsy N Uadex Apnjg Type: ERMS 36220 Capacity: 3600 x 220 tons FastBend 2D CNC control Y1, Y2, X, and R axes CNC controlled CNC crowning Akas Fiessler laser safety Year of manufacture: 2011 1 set of complete tooling for 1 to 6 mm

Year of construction: 2010, condition: good (used), Make: Hegenscheidt MFD Type: PR 250 / 1000 Control: Siemens TOUCH Year: 2010 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Specifications Metric US Standard Centre height 550 mm Max. wheel tread Ø Hjdokvnggspfx Apnofg 1100 mm Max. wheelset length 2500 mm Max. pressing force 250 T Max. cylinder stroke 500 mm Cylinder Ø 300 Working speed 10 - 80 mm/min. Pinole feed 1300 mm/min. Return speed 1300 mm/min. Dimensions (Estimate) Length 6100 mm Width 5730 mm Height 3750 mm Weight 15900 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Hedpfx Apskvmi Sonjfg Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, power: 15 kW (20.39 HP), operating speed: 10 mm/s, total length: 4,000 mm, total width: 2,000 mm, total height: 3,000 mm, overall weight: 11,500 kg, controller manufacturer: Delem DA65, working width: 3,100 mm, bending force (max.): 175 t, distance between stands: 2,550 mm, control type: CNC control, number of axes: 5, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 175T Beam stroke: 225mm Table Width: 150mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Control: yes Crowning: yes Hydraulic toolclamping: yes Power: 15kW Length: 4000mm Width: 2000mm Height: 3000mm Hjdpfxsyvz H Ro Apnjfg Weight: 11500kg

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power Hsdpfx Aewp Nv Hepnsfg 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: good (used), Year of construction: 2008, pressing force: 300 t, control type: CNC control, actuation type: hydraulic, CNC crowning Hydraulic tool clamping EFL Easy Form laser measuring & correction system Set tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Hjdpfswrza Aex Apnofg Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg