Used New Delta Lc400 for sale (20,330)

Condition: good (used), functionality: fully functional, machine/vehicle number: T.D.B (Serienummer: F9902637), For sale: High-capacity industrial load resistors manufactured by Delta Résistances S.A. Technical specifications per unit (as per the official nameplate): - Power rating: 300 kW at 400 V - Current: 433 A Gsdpozl Eprjfx An Ioug - Resistance: 0.533 Ohms - Duty cycle: Continuous (PERM) Ideally suited for heavy-duty industrial applications, including generator load testing (load banks), emergency power systems, motor braking cycles, and electrical discharge systems. The units are CE certified. Logistics: Both units are securely packed and stored together on a single pallet for easy transport. Dimensions per unit are 240 cm (width) x 35 cm (depth) x 110 cm (height). Worldwide shipping can be arranged upon request. Inspection is available by appointment.

Condition: used, Year of construction: 2012, operating hours: 7,000 h, Equipment: all wheel drive, New Holland B115C (C-Series, approx. year of manufacture 2012) 110 hp Very good condition Approx. 7000,- Gedpjxnvlvsfx An Ioug

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA Guedjyug R Ropfx An Iog • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: used, Filler, manufacturer: KHS / H+K, type: Delta VVF 90/16, rated output up to 38,000 bph, operated at 24,000 bph, with 90 filling valves, with double pre-evacuation, vacuum pump, high-pressure injection, motorized height adjustment, with CIP caps, residual liquid control before filler infeed, with 16-head crowner including crown cap feeder, running direction: left to right, year of manufacture: 1982, retrofitted with new S7 control system in 2004. Gusdpfoyzhqtex An Isg

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, overall weight: 38,500 kg, empty load weight: 38,500 kg, digging bucket width: 299 mm, Year of construction: 2006, operating hours: 13,500 h, Equipment: standard shovel, steel tracks, NEW HOLLAND KOBELCO tracked excavator, year 2006, 13,500 hours, ISUZU 185 [kW] engine, 3,000 hours since replacement, 2.99 [m] bucket, weight 38.5 [tons]. Guedpfx Aezw Ntron Ieg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, product height (max.): 450 mm, product height (min.): 90 mm, product length (min.): 230 mm, product length (max.): 800 mm, product width (max.): 500 mm, product width (min.): 120 mm, Equipment: documentation/manual, The production line is a complete system suitable for packaging all types of AFH tissue paper products. The line begins with a conveyor belt which serves as a buffer. The end of the conveyor belt can be lowered, enabling the machine to handle all types of hand towels. Following the conveyor belt is an Italian-made MAC DUE stacker, which is capable of stacking toilet roll in 1, 2 or 3 layers. This is followed by another conveyor belt, which connects the stacker to the packaging machine. Guodpfxezvym Tj An Isg Next comes the CB 150A universal, fully automatic packaging machine, designed in Italy for packaging AfH tissue products. The packaging machine is highly flexible, easy to set up and operates automatically. The maximum packaging speed is 5 packs per minute. Following the packaging machine is a shrink tunnel, which is integrated into the packaging machine. The MAC DUE HMI is a new DELTA model. The CB 050A packaging machine’s PLC (OMRON) comes with a new program; the electrical cabinet was rewired in 2022, and a diagram of this has also been drawn up, which I will provide with the machine. This packaging machine’s HMI is also a new Delta model. I will provide the source programs for both the HMI and the PLC with the machine. The production line was dismantled on 12 July 2026 due to the purchase of a new machine. The machine is packed and in storage, ready for delivery at any time. Commissioning can be arranged on request, but it is straightforward to install and I can also provide online support. Numerous videos have been made of the machine.

Condition: used, Year of construction: 1989, color: red, Applicable material: Hay Gsdpfxoziplre An Isug Bale width: 1200 Bale height: 900

Condition: like new (used), Year of construction: 2022, power: 2.2 kW (2.99 HP), SEW Eurodrive KH77 DRN90L4/BE2/DI/DFC/IV Manufacturer: SEW Eurodrive Type: KH77 DRN90L4/BE2/DI/DFC/IV Serial Number: 01.8125801513.0001.22 Technical Data Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed [rpm]: 2900 Output Speed [rpm]: 33 - 1.6 Total Gear Ratio [i]: 88.97 Max. Torque [Nm]: 1,550 Output Torque [Nm]: 645 Service Factor SEW-FB: 2.40 Design: IM M1A ISO Designation: CLP 220 Lubricant Type: Mineral Oil Lubricant Quantity [l]: 2.10 Motor Power [kW]: 2.2 / 0.11 Motor Rated Power [kW]: 1,500 Motor Frequency [Hz]: 100 Mains Rated Frequency [Hz]: 50-60 +/- 5% Supply Voltage [V]: 3x AC 380 -5% to AC 500 +10% Mains Rated Current [A]: 5.00 Output Rated Current [A]: 5.5 Duty Cycle S1-S10: S1 Adjustment Range (VT): 1:20 Motor Voltage [V] / Switching Mode: 230 Delta Motor Mains Frequency [Hz]: 50 cos phi: 0.74 Insulation Class [°C] / Protection Class [IP]: 155(F) / 54 International Efficiency Class: IE3 Motor Mains Efficiency [%]: 85.6 Efficiency at 50/75% Pn [%]: 84.6 / 86.1 Ambient Temperature Min. [°C]: -20 Ambient Temperature Max. [°C]: 40 Brake Voltage [V] / Brake Torque [Nm]: 400 AC / 10 Gedpfxszrdg No An Ioug Brake Rectifier: none Nameplate: German Weight: 78.00 kg SEW Eurodrive Gear Motors – Various Types Immediately Available Several high-quality gear motors from the manufacturer SEW-EURODRIVE are available for sale in various sizes and designs. These drives are ideally suited for use in machinery and plant engineering, in material handling technology, and for numerous industrial applications. Available Types: 1. SEW KH107/T DRN132S4/BE11HR/ASE1/TF Motor Speed: 1,461 / 12 rpm Total Gear Ratio: i = 121.46 Max. Permissible Torque (Ma max): 8,000 Nm Output Torque: 4,370 Nm 2. SEW KH77 DRN90L4/BE2/DI/DFC/IV Including Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 33 – 1.6 rpm Total Gear Ratio: i = 88.97 Max. Permissible Torque (Ma max): 1,550 Nm Output Torque: 645 Nm 3. SEW KH67/T DRN90L4/BE2/ASB1/Z Speed: 1,461 / 26 rpm Total Gear Ratio: i = 57.28 Max. Permissible Torque (Ma max): 820 Nm Output Torque: 560 Nm 4. SEW K57 DRN80MK4/BE1/ASB1/Z Speed: 1,435 / 13 rpm Total Gear Ratio: i = 108.29 Max. Permissible Torque (Ma max): 600 Nm Output Torque: 395 Nm 5. SEW KH37 DRN71M4/BE05/DI/DFC/IV Including Decentralized Inverter: DFC20A-0020-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 30 – 1.5 rpm Total Gear Ratio: i = 97.81 Max. Permissible Torque (Ma max): 200 Nm Output Torque: 177 Nm General Information Manufacturer: SEW-EURODRIVE Robust Industrial Quality Various Power and Torque Ranges Available Partially with Integrated Decentralized Frequency Inverter (DFC) Ideal as a Replacement Drive or for New Projects

Condition: like new (used), Year of construction: 2019, Used belt dryer New eco tec Model Woody 500-100-1.0 SP Produced in 2019. Gjdjvrd Uqepfx An Ieug Like new.

Condition: good (used), Year of construction: 2008, operating hours: 45,000 h, Used, oil-free, variable 55 kW screw compressor ALMIG LENTO 55 WK (water-cooled) The compressor is in good, neat condition. Year of construction: 2008 Operating hours: 45,000 operating hours Technical specifications Type: LENTO 55 WK Possible operating pressures of the system (continuously adjustable): 5 - 10 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C: at 5 bar min / max: 1.41 / 7.79 m³ / min at 6 bar min / max: 1.40 / 7.74 ​​m³ / min at 7 bar min / max: 1.39 / 7.69 m³ / min at 8 bar min / max: 1.38 / 7.64 m³ / min at 9 bar min / max: 1.37 / 7.59 m³ / min at 10 bar min / max: 1.35 / 7.29 m³ / min Rated power drive motor: 55 kW Degree of protection / insulation class of drive motor: IE 3 Protection / insulation class fan motor: IP 54 / H Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ Cooling water requirement at 100% load (with inlet + 15 ° / delta t = 15 K): 55 l / min Cooling water supply (min / max): 5/35 ° C Cooling water outlet (max): 45 ° C Cooling water pressure (min / max): 4/10 bar Cooling water volume (min / max): 140 l / min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point refrigeration dryer 50% load: 3 ° C 100% load: 3 ° C Sound pressure level (DIN 45635 part 13) Gsdjgkbfhopfx An Ijug soundproofed, at 50% load: 64 dB (A) 100% load: 73 dB (A) Length: 2,300 mm Width: 1,400 mm Height: 1,560 mm Weight: 1,590 kg Compressed air connection: G 1 1/2 inches Visit our shop, we always have a large number of new and used compressors in stock.

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, Rev. Speed: 9 revs/min Height: 900 mm (35.43 in), adjustable ±50 mm (±1.97 in) Gedstp I Dcjpfx An Ieug Diameter: Ø 1150 mm (45.27 in) Electricity supply: 250 W, 1 A, 230 V, 1 Ph, 50 Hz (110 VAC, 2 Amps, 60 Hz) Castor wheels with brakes Load: 80 kg (176 lbs) Materials used: stainless steel AISI304, food grade ALU and PE CE marking

Condition: used, Artrhur Klink RSH1 - 1250 Broach Grinder 09.2009 , new 1979, Table 200 x 1800, Electro mag 200 x 600, with related tooling/accessories, no cabinet. Gusdszc Iq Ispfx An Iog

Year of construction: 2022, condition: used, Second-hand machine Year of manufacture: 2022 Condition: as new, very few operating hours, not used in production Features and technical specifications: Gjdszk Nrzspfx An Ioug - Compact screw compressor with variable speed control and innovative LOGIN control system - With tank and refrigerated dryer - Maximum pressure: 10 bar - Effective delivery rate: 1,050 l/min - Motor power: 7.5 kW - Noise level: 62 dB(A) - Connection: 1/2 - Tank capacity: 270 litres (AD2000) - Frequency-controlled - Electronic control - Oil heat exchanger - Compressed air receiver, hot-dip galvanised inside and out - Drive transmission: Direct coupling - Starting method: Star-delta - Compliant with AD 2000: yes Dimensions: 1,200 × 650 × 1,540 mm Weight: 295 kg Availability: at short notice Storage location: Röllbach

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Guedsp H Swdjpfx An Ieg Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Guodpszlgbpefx An Iog Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: good (used), Year of construction: 2023, operating hours: 159 h, Used, oil-free, variable 55 kW screw compressor Immediately available! (Subject to prior sale!) ALMIG LENTO 55 WK (water-cooled) with Air Control Premium controller The compressor is in very good condition and has only run for 157 hours so far. Year of manufacture: 2023 Operating hours: 157 h Technical data Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min Godpfxsxud Eqs An Ijug at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: new, High-quality grid decking with high load capacities, a cost-effective alternative to grid grating – new product – Prices available upon request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (so, for a 2.70m beam, 3 deckings are required = 2,655mm) 1335mm Frame depths: 1.05m 1.10m 1.20m Other depths available upon request! Uniformly distributed load: between 250 and 1,500kg Standard (price applies to the standard version): 1,000kg, i.e., also per pallet Guedpfx Aneiuvxbj Iog Grid spacing: 50 x 100 or 25x100mm When making an inquiry, please also specify the type of beam (crossbeam) you have! I.e., whether it is a box profile (or IPE beam) 50 or 40mm, or whether you have crossbeams with a step. Advantages: no sharp edges 200% safety factor – independent of the shelving beams Tested for permissible deflection and structural failure Wide selection of standard sizes and load capacities MantaMESH is our market-leading wire mesh decking solution. MantaMESH provides assurance with more than 70% open area and a safety factor of 200%, exceeding the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR sprinklers. Compatible with ANSI MH 26.2 - 2007 Made in Germany Pre-welded, hemmed support channels Pre-galvanized finish Maximum deflection independent of the rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of the beam: 1100 mm deep: 2000 kg Mesh has more than 70% open area Example configuration – we would be happy to create a configuration for your application! Depth 1102mm Width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the beams Front: folds out 30mm Rear: folds down 30mm on the outside Item weight 9.43kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: T7-165S, Brand New Holland Models T7.165S Type Agricultural Tractor Year 2018 Excellent condition Power 165 HP RM Number 4 RM Number of hours 4300 h Gearbox type Semi-automatic gearbox Transmission name RANGE RECOMMENDATION Air conditioning Yes AV equipment Rel PdF AV equipment Front suspension axle Yes Gedpowq A Apofx An Ijug Suspended cabin Yes Number of distributors 4 distributors Front dimensions 540/65R28 Rear dimensions 650/65R38 Front wear (%) 70% wear Rear wear (%) 70% wear (AR)

Condition: reconditioned (used), Year of construction: 2019, operating hours: 6,700 h, functionality: fully functional, machine/vehicle number: 3.9 - 1200C, type of input current: three-phase, input voltage: 400 V, filter area: 40 m², suction capacity: 1,500 m³/h, negative pressure: 3,000 Pa, compressed air connection: 5 bar, power: 3 kW (4.08 HP), extraction connection diameter: 200 mm, LM Ecocell 1500 Godpfex Rrlmjx An Ieug Year of manufacture: 2019. 3 KW / 6 A / 50 HZ Type: 3.9 - 1200C - Equipped with DOL relay start in original LM control unit, with on/off and automatic start-up functions. - Price includes 9x 4.5m² NEW filter cartridges installed in the unit upon sale. - Price includes 1x NEW HEPA filter cartridge installed in the unit upon sale. - Equipped with compressed air cleaning system, Delta P controlled. - Ex works Soerendonk (NL), loaded on truck free of charge. Tested and operational, can be demonstrated in our workshop. - Sold as seen, no warranty. - Tested on site and in proper working order. - Testing and inspection possible.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Storage Tank – 1.4404 – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o., Slovenia Type: SVBBH-3500 Tag no.: Serial number: 1003461 Year of manufacture: 2020 Condition: As new / unused BH6771-BH1001 Package 29 TECHNICAL DATA Product type: Storage tank / process vessel Nominal capacity: 3,500 liters Total volume: approx. 4,082 liters Empty weight: approx. 1,750 kg Material in contact with product: 1.4404 (AISI 316L) Internal surface: electropolished Surface roughness: tested according to roughness protocol (Ra ≤ 0.8 µm) Permissible pressure PS, vessel: -1 / +3 bar Test pressure PT, vessel: 5.6 bar Permissible pressure PS, jacket: -1 / +6 bar Test pressure PT, jacket: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 Pressure vessel according to PED 2014/68/EU Category III Module G – single item inspection CE marking FAT – Factory Acceptance Test Full FAT inspection carried out on 26.08.2020. Documentation check: complete and released Welding documentation inspected and compliant Delta ferrite inspection conducted, no deviations Surface roughness checked and compliant All inspections rated “OK”. EXECUTION • Horizontal cylindrical pressure vessel • Dished heads • Multiple CIP connections on end face • CIP spray ball system • Manhole with round pressure cover • Pressure and temperature connections • Bottom discharge outlet • Stainless steel support legs • Pharmaceutical-grade weld seams DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV certificate • Module G individual inspection • FAT protocols • Welding documentation • WPQR / WPS • 3.1 Material certificates • Non-destructive test reports • Delta ferrite test report • Roughness protocol • Dimensional accuracy report • Calibration certificates • Technical drawings • Parts list • Operating and maintenance manual Complete digital documentation folder available. CONDITION • Never in productive use • Stored item • Interior surface in absolutely as-new condition • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotechnological applications SPECIAL FEATURE Guodpfx Anjylnppj Iog Custom-manufactured BRINOX pharmaceutical tank with full FAT acceptance, verified welding documentation, delta ferrite certification, documented surface roughness, and comprehensive PED Module G single-inspection. Not a standard tank – but pharmaceutical grade suitable for validation, with complete technical documentation throughout.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 45 kW (61.18 HP), Material shredding machine MHR 1030-45 kW Immediately available demonstration machine – as new condition For sale is a new material shredding machine MHR 1030-45 kW from our exhibition and demonstration stock. The machine is immediately available and can be inspected and demonstrated by appointment. Due to the elimination of the usual production and delivery times, the system is ideal for companies that require additional shredding capacity in the short term. Technical data Infeed opening: approx. 1,030 x 1,235 mm Hopper design: inclined Hopper volume: approx. 1.5 m³ Rotor diameter: 360 mm Rotor design: standard Cutting system: 25 concave knives + 25 square knives Screen size: 25 / 30 mm (optional) Main drive: 45 kW Power connection: 400 V / 50 Hz / 3 phases PLC control Control cabinet completely wired including 5 m connection cable Hydraulic slide with pressure bar Equipment Automatic star-delta start Automatic idle detection with shutdown Cyclic control to avoid unnecessary idle times Performance-enhancing step control for the hydraulic slide Vibration-dampening machine feet Solid base frame Control cabinet extension for integration of conveyor belt and overband magnetic separator Painting Machine body: RAL 9005 Deep black Hopper and drive guard: RAL 5012 Light blue Application areas Suitable for shredding: Wood and wood waste Gusdpfx Anezhx Ele Ieg Plastics Packaging materials Production waste Commercial and industrial waste Recyclable materials for further processing ✔ New machine from exhibition stock ✔ Ready for demonstration ✔ Immediately available ✔ No production or delivery time ✔ Inspection and test run possible by appointment Price, net plus VAT Further information, videos or an individual offer can be provided upon request.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,250 kg, fuel type: electric, For sale is a ROBUST REUSER SD 600 industrial shredder in like-new condition. The machine comes from an exhibition and has not been used in production. It has no operating hours and is therefore offered as a new machine from an exhibition. The SD 600 is a compact and powerful shredder for various materials, such as wood, plastic, cardboard, paper, and electrical cables. Thanks to the PLC control, automatic operation, and robust cutting unit, the machine is ideal for craft, recycling, and industrial businesses. Technical data: Model: ROBUST REUSER SD 600 Condition: New machine / Exhibition machine Operating hours: 0 Motor power: 15 kW Operating voltage: 400 V Frequency: 50 Hz Fuse rating: 40 A gG / 50 A D Weight: approx. 1,250 kg Dimensions L × W × H: 1.88 × 1.12 × 1.67 m Rotor diameter: 222 mm Rotor length: 550 mm Rotor speed: 80–120 rpm Number of cutting blades: 14 Size of the feed opening: 946 × 567 mm Granulate size: approx. 10–30 mm Capacity: up to 2.5 m³ per hour HOLE SIEVE HARDOX 450 (30mm) The actual throughput and granulate size depend on the material used and the size of the sieve openings. Features and advantages PLC control included Suction connection Ø 160 mm included Fully automatic operation Hardened blades with four usable cutting edges Gjdpfezl A I Eox An Ijug Robust sieve made of HARDOX Protected hydraulic system Star-delta motor control Quiet and energy-efficient operation Compact and robust design Easy installation Low maintenance requirements We offer the following warranty on the machine: 12 months or up to 1,000 operating hours, whichever comes first. The machine is available immediately. Inspection and further information are available by prior arrangement. The stated selling price is a net price. The statutory value-added tax will be added and shown separately on the invoice. Sale subject to prior sale and errors.

Condition: good (used), Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, We are offering this used Costa Delta TRI-T-T 1350 wide belt sanding machine, manufactured in 2009. The machine has only 2500 operating hours and is in good condition. Further details can be found in the data sheet. Gusdpszx Tgrjfx An Ieg If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 500 h, Sublimation machine for wood effect on aluminium profiles. Gedpfxou Td Ize An Ijug the machine has 11 places for profiles and is totally functionable and ready for use.

Condition: used, Year of construction: 2025, New demonstration machine! List price €25,500 net. Machine concept WL 4 / 18.5 kW. The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed either via a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended on universal joints to avoid transverse forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 256 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive and 4-way rotatable knives/cutting inserts are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction of the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption and an optimal discharge of the shredded material. The screen attached under the rotor determines the chip size (10 - 100 mm). On request, a hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor stub on one side. Equipment and technical data: Drive power 18.5 kWHopper opening with Logspacer: 600 x 1,050 mmHopper capacity: approx. 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 252 mmRotor speed 60-100 rpmNumber of knives: 28Type and size of knives: concave / 40 x 40 mm, cutting insertsScreen size: 12/10 mmPainting: Weima Standard RAL 2002 / 7016Connection value: 400 V +/- 5% / 50 HzWeight approx. 1,300 kg including:Control cabinet with display and 5 m cableElectrical controlStar-delta startRubber vibration elementV-rotor (patented) with knife pockets milled into the profileGearbox limit switch2nd knife rowClamping bar on the slide Godpfx Aozuf U Tsn Ioug Location: