Used Niles Heavy Duty Lathe for sale (9,931)

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Lrjdpfx Adeh U Rzgetsk Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, color: other, first registration: 04/2010, Year of construction: 2010, Serial number: 25.50.744.012 We have a stock of >100 axles. Lodpfx Adjy Eft Hetjrk Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 04/2010, Year of construction: 2010, Serial number: 25.50.744.013 We have a stock of >100 axles. Lrodpey Efrcefx Adtsk Please contact us if you can't find what you are looking for.

Condition: used, machine/vehicle number: XL9T0N30074415045, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2008, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Lift Axle = More information = Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg Registration number: OK-81-SK Lredpfx Aoy Extasdtok

Condition: used, machine/vehicle number: XL9T0N30004415021, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2006, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2006, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes Lrjdpfx Adox R Stwotok = More information = Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 6.330 kg Carrying capacity: 38.670 kg GVW: 45.000 kg Registration number: OJ-39-DY

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, total length: 10,000 mm, total height: 3,200 mm, total width: 1,200 mm, overall weight: 1,000 kg, No minimum price – guaranteed sale to the highest bidder! Lrodpey D Txbofx Adtok Bidding obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Dimensions of storage platform: 2,700 x 1,100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 10,000 x 1,200 x 3,200 mm Weight: 1,000 kg Internal reference: 74

Condition: not inspected (used), functionality: unexamined, table length: 1,700 mm, table width: 500 mm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely pickup between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Number of workbenches: 4 Surface dimensions: 1,700 x 500 mm Dimensions per workbench: 1,500 x 730 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 7,500 x 1,100 x 2,700 mm Ljdpfx Asy D Tuvedtsrk Weight: 1,500 kg EQUIPMENT • Welding positioner (Manufacturer: RÖHM) • Balancing scale • Sheet metal cutting device (cutting length: 100 mm) • Collets • Arbor press • Electric engraver • Vice (jaw width: 150 mm) • Abrasives • Sandpaper • Sheet metal shears (Manufacturer: FEIN) • Screws • Drill bits • Number punches • Heavy-duty rack without contents External Reference: 25

Condition: not inspected (used), functionality: unexamined, load capacity per storage section: 2,600 kg, total length: 5,700 mm, total height: 3,500 mm, total width: 1,200 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23.06.2026 and 26.06.2026! Ledpfx Adjy D Th Astsrk TECHNICAL DETAILS Dimensions per shelf: 2,700 x 1,200 mm Shelf load capacity: 2,600 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,700 x 1,200 x 3,500 mm Weight: 700 kg External reference: 5

Condition: not inspected (used), functionality: unexamined, total length: 5,700 mm, total height: 3,500 mm, total width: 1,200 mm, overall weight: 700 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obligates you to timely collection between 23/06/2026 and 26/06/2026! Lrjdey D Tg Sspfx Adtjk TECHNICAL DETAILS Dimensions per storage shelf: 2,700 x 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,700 x 1,200 x 3,500 mm Weight: 700 kg External reference: 7

Condition: used, machine/vehicle number: XL9T0N30074415051, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2010, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Lift Axle = More information = Lodpfjyu Iinox Adtjrk Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg Registration number: OL-10-GF

Condition: used, machine/vehicle number: XL9T0N30074415050, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2010, total length: 13,800 mm, total width: 2,550 mm, suspension: air, wheelbase: 9,110 mm, color: other, Year of construction: 2010, = Additional options and accessories = - Air Suspension - BPW Axles - Lift Axle = More information = Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Lrodeymluropfx Adtjk Rear axle 3: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg Identification Registration number: OL-11-GF

Condition: used, machine/vehicle number: XL9T0N30074415053, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2010, total length: 13,800 mm, total width: 2,550 mm, suspension: air, wheelbase: 9,110 mm, color: other, Year of construction: 2010, = Additional options and accessories = - Air Suspension - BPW Axles - Lift Axle Ljdpfjymlulex Adtork = More information = Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg Identification Registration number: OL-08-GF

Year of construction: 2007, condition: excellent (used), Roll pallet, heavy-duty roll pallet, platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagons -Platform: 7100/2820/H800 mm -Load capacity: 12 t -Stake pockets: 2 pieces -Tires: Pneumatic tires, dual tires, 4 pieces 7.00-12, see photos -Transport dimensions: 7100/2820/H800 mm -Weight: 2760 kg Lredpfxey Aybto Adtok

Year of construction: 2007, condition: excellent (used), Forklift gooseneck, gooseneck for roll pallets, heavy-duty roll pallets, platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, forklift gooseneck -Gooseneck: with automatic locking -Load capacity: 4 t Lsdpfxsy Aya Ne Adterk -Transport dimensions: 1060/2580/H850 mm -Weight: 522 kg

Condition: excellent (used), functionality: fully functional, mileage: 422,272 km, power: 375 kW (509.86 HP), first registration: 01/2019, empty load weight: 9,814 kg, overall weight: 26,000 kg, axle configuration: 6x4, next inspection (TÜV): 12/2026, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, suspension: air, number of seats: 2, Year of construction: 2019, Equipment: air conditioning, full service history, hill-start assist, lane keeping assist, navigation system, parking heater, Volvo FH 500/6x4/Lift Axle/60t/Inspection valid until 12/26 • Manufacturer: Volvo • Model: FH 500 • Mileage: 422,272 km • First registration: 01/2019 • Power: 375 kW/510 hp • Axle configuration: 6x4 • Transmission: Automatic Lrodpfoy Ey Sdjx Adtek • Suspension: Air-air • Lift axle • Retarder • PTO (Power Take-Off) • Tipping hydraulics • Lane keeping assistant • Auxiliary heater • Air conditioning • Heater • Navigation system • Sleeper cab • Radio • Hands-free telephone system • Hill start assist • Unladen weight: 9,814 kg • Payload: 16,186 kg • Gross vehicle weight: 26,000 kg • Euro 6D • Inspection (TÜV) valid until Dec 2026 • German vehicle • German documents • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or spelling mistakes excepted. - Sale according to our general terms and conditions (GTC).

Condition: used, machine/vehicle number: XL9T0N30064415023, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2006, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2006, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes Lredpfx Aoymbgqodtsk = More information = Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 6.320 kg Carrying capacity: 38.680 kg GVW: 45.000 kg Registration number: OJ-76-HX

Condition: used, mileage: 51,800 km, power: 346 kW (470.43 HP), first registration: 04/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, compressor, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.470 6x6 with HMF 3220 K-6 Loading Crane Vehicle Data * MAN TGS 33.470 * 6x6 All-wheel Drive * Gross Vehicle Weight: 33,000 kg * Wheelbase: 3,600 mm -- Engine & Drivetrain * 6-cylinder Diesel Engine * 470 hp * Euro 6 * Traxon Transmission – 12-speed * Automated Gearbox * Retarder * Transfer Case with Off-road Reduction * Differential Locks: Front, Centre & Rear * PTO (Power Take-Off), transmission dependent -- Chassis & Axles * 6x6 Drive * Driven Front Axle * Two Driven Rear Axles * Leaf/Air Suspension * Drum Brakes on All Axles * Electronic Braking System (EBS) * Off-road ABS -- Tires & Wheels * Front Axle: 385/65 R22.5 * Rear Axles: 315/80 R22.5 * Twin Tyres on Rear Axles -- Tanks & Dimensions * Fuel Tank: 400 litres * AdBlue Tank: 85 litres -- Lighting & Visibility * LED Beacon * LED Work Lights * Additional Rear Work Lights Lrjdpfxevhvlge Adtok * LED Side Marker Lights * Daytime Running Lights * Exterior Sun Visor -- Cab & Comfort * MAN NN Cab * Comfort Cab Suspension * Air-suspended Driver’s Seat * Driver’s Seat Heating * Multifunction Steering Wheel * On-board Computer * Air Conditioning * Interior & Exterior Sun Visor * Electrically Adjustable & Heated Mirrors * Storage Compartments * Central Locking * Comfort Entry -- Infotainment & Digitalization * MAN Media System Advanced * 7-inch Touch Display * Connectivity Board Module (RIO Box) * Smartphone Integration (Apple CarPlay/Android Auto) * MAN SmartSelect Control Unit * Bluetooth / USB * On-board Computer with Driving Data Display -- Hydraulics & PTO * PTO (Power Take-Off) * Transmission-dependent PTO, type NH/4c, without flange, ratio = 0.88/1.14, position approx. 2:30 * Tipping Hydraulic System * Transmission-side Switchable -- Loading Crane * HMF 3220 K-6 * 6 Extensions * Year of Manufacture: 2022 * RCS * HMF RCL 5400 Control System * Radio Remote Control * JIB * 4 Hydraulic Connections at Crane End * 4 Hydraulically Telescoping Outriggers Lifting Capacity at 4.60 m = 6,070 kg Lifting Capacity at 16.70 m = 1,330 kg Errors and prior sale excepted. Internal Vehicle Number: 9506 WhatsApp Support Available! If you have questions about the vehicle or would like further information, please feel free to contact us conveniently via WhatsApp.

Condition: used, mileage: 310,100 km, power: 390 kW (530.25 HP), first registration: 08/2006, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x4, wheelbase: 5,450 mm, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: steel, total length: 7,700 mm, total width: 2,550 mm, Year of construction: 2006, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, retarder, = Additional options and accessories = - Leaf suspension - Digital tachograph Lredpfx Aey Dpxwedtok - Refrigerator - Hub reduction - PTO (Power Take-Off) - Radio/CD player - Sleeper cab - Bowl - Sun visor = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,816 cc Axle configuration Front axle 1: Tire size: 385/65 R 22.5; Steered; Tire tread left: 50%; Tire tread right: 50%; Suspension: leaf suspension Front axle 2: Tire size: 385/65 R 22.5; Steered; Tire tread left: 50%; Tire tread right: 50%; Suspension: leaf suspension Rear axle 1: Tire size: 315/80 R 22.5; Twin tires; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60% Rear axle 2: Tire size: 315/80 R 22.5; Twin tires; Tire tread left inner: 35%; Tire tread left outer: 35%; Tire tread right inner: 35%; Tire tread right outer: 35% Weights Unladen weight: 12,260 kg Payload: 19,740 kg Gross vehicle weight (GVW): 32,000 kg Condition Damage: none Identification Registration number: BS-FS-89

Condition: used, 110 Kw / 150 hp model. Machine has been refurbished previously. Perfect for grinding full frozen blocks etc. Ledpfxjywpcis Adtjrk

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,515 h, load capacity: 18,000 kg, lifting height: 4,500 mm, load center: 1,200 mm, fuel type: diesel, mast type: triplex, power: 168 kW (228.42 HP), motor manufacturer: Cummins QSB6.7, fork carriage width: 2,600 mm, fork length: 2,400 mm, fork width: 260 mm, fork thickness: 110 mm, tire condition: 70 %, front tire size: 14.00-24, rear tire size: 14.00-24, overall weight: 33,540 kg, color: blue, Equipment: CE marking, air conditioning, cabin, centralized greasing system, pallet forks, sideshift, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 4,515 h Max. lifting capacity: 18,000 kg Max. lifting height: 4.5 m Mast type: Triplex Fork length: approx. 2,400 mm Sideshift fork carriage: Yes Drive: Diesel Transmission: Automatic (powershift) Cabin: Enclosed Heated cabin: Yes Lrsdpfx Aeyid Iysdtsk Tyres: Pneumatic Stabilisers: No Engine manufacturer: Cummins QSB6.7 Emission class: Stage IV / V Weight: 33,540 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available Heavy-duty 18-ton diesel forklift Triplex mast with free lift Sideshift fork carriage Comfort operator cabin Hydrodynamic powershift transmission Oil-cooled wet disc brakes Hydraulic servo steering Continental pneumatic tyres Rear view camera system Ideal for heavy industrial handling, steel, concrete and port logistics. === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection available upon request. Tyres in good condition (approx. 70%). Machine ready for immediate work. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines from first owner with full service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE certified and ready for immediate use. Spare parts and professional assistance available upon request. === DELIVERY === Crane loading available on request for smooth transport during shipment. Flexible shipping options tailored to your destination and logistical preferences. All transports are professionally handled by the Collé Rental & Sales logistics team.

Condition: used, machine/vehicle number: XL9T0N30074415042, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2007, total length: 13,800 mm, total width: 2,550 mm, suspension: air, wheelbase: 9,110 mm, color: other, Year of construction: 2007, = Additional options and accessories = - Air Suspension - BPW Axles - Lift Axle = More information = Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg Identification Registration number: OK-33-DK Lsdpsx Ihazsfx Adtjrk

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer Lredpeygtbasfx Adtsk -Manufacturer: Plan, heavy-duty transport wagon with 1-axle turntable steering -Platform: 6520/2500/H755 mm -Load capacity: 20 t -Tires: Solid rubber dual tires, 8 pieces, 405/130-305, see photos -Overall dimensions: 8020/2500/H755 mm -Transport dimensions: 6520/2500/H755 mm -Weight: 2640 kg

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross Ljdpfxsy D Sbns Adtsrk You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: new, APPROX. 8.4 RUNNING METERS, H: 500CM, SHELF LOAD: 4500 KG, PALLET RACKING, HEAVY-DUTY RACKING, HIGH-BAY RACKING, INDUSTRIAL RACKING, RACKING IMMEDIATELY FROM STOCK Approx. 8.4 running meters, h: 500 cm, shelf load: 4500 kg Pallet racks, heavy duty racks, high racks . Industrial shelving , Racks Immediately from stock Lredpfx Ajy D R R Usdtek Data : - Height : approx. 500 cm - Depth : approx. 110 cm - Length : approx. 8.4 running meters - Load: 4500 kg shelf load - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 04 x upright approx. 500 cm x 110 cm, disassembled. - 18 x crossbar approx. 270 x 15 x 5 cm, T45. - 36 x safety pins. - Levels: Floor + 3 - 36 pallet spaces incl. floor spaces. - - IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1840,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece.

Condition: used, functionality: fully functional, The used Stow pallet racking system is a high-quality heavy-duty rack designed for industrial storage – approximately 100 linear meters in length and 7 meters high. Ideal for logistics, warehouses, and trades requiring maximum storage capacity in a minimal footprint. Manufactured in Europe, this racking system stands for stability, quality, and durability. Now available directly from stock – perfect for businesses with a high turnover of goods. Customizable to your requirements: The rack frames can be individually modified to your desired height – precisely and professionally in our workshop. Contact us – we offer tailor-made solutions for your storage needs. PRODUCT DETAILS: - Height: approx. 700 cm - Depth: approx. 110 cm - Length: approx. 10,000 cm (100 linear meters) - Shelf load: 3,200 kg - Beams: 360 x 14.5 x 5 cm - Beam color: RAL2004 (orange painted) - Uprights: 700 x 110 cm, RAL5015 (blue painted), pre-assembled - Levels: floor + 3 - Pallet spaces: 432 incl. floor positions - Version: Used Stow equipment INCLUDED IN DELIVERY: - 28 x upright frames (approx. 700 x 110 cm), pre-assembled - 162 x beams (approx. 360 x 14.5 x 5 cm) - 324 x safety pins Price: €9,800.00 net €11,662.00 gross An invoice with VAT shown will be issued. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner carrier – shipping costs depend on postal code - Professional installation and dismantling by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department will be happy to prepare a non-binding, customized offer based on your requirements. Whether new builds, conversions, or expansions – we offer expert advice for your racking configuration. SHOWROOM: You are welcome to visit us in our showroom! Experience our pallet racks, storage racks, and other solutions firsthand. Many systems are assembled and can be viewed in operation. Our specialists are on site to answer your questions and provide personalized advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of numerous offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. Our telephone number is available on our company page. ☎️ Lrodpfjy D R Ruox Adtjk We can be reached by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.