Used Oce Plot Wave 360 for sale (4,231)

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Prodpfx Asrx S Ipsazjb Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: excellent (used), Year of construction: 2012, operating hours: 78,733 h, functionality: fully functional, DMG / DECKEL MAHO DMF 360 linear Machine was overhauled in 2025 for approximately 60,000 EUR. 21,000 spindle operating hours Year of manufacture: 2012 Working area X: 3,600 mm Y: 1,100 mm Z: 900 mm Sliding table design 2 working areas for pendulum machining Removable working area partition Direct measuring systems Dynamics / Axes Linear drive X-axis Rapid traverse X/Y/Z: 80 / 60 / 60 m/min Acceleration X/Y/Z: 5 / 6 / 6 m/s² Active cooling for main spindle and linear motor Swiveling head / Main spindle CNC swiveling head B-axis Speed range: 20–18,000 rpm Tool holder: HSK-A63 Holder according to DIN 69893 Power: 35 / 25 kW at 40 / 100 % duty cycle Tool magazine 60 tool positions Magazine design compatible with HSK-A63 / SK40 Chain magazine Double gripper Chip-to-chip time: 7.5 s Control system HEIDENHAIN iTNC 530 3D control smarT.NC ERGOline Control 19" screen Table / Rotary table Fixed table: 4,200 × 1,100 mm Integrated rotary table Rotary table Ø 1,050 mm Arranged on the left Max. load capacity: 1,200 kg Hydraulic clamping Hydraulic clamping 30–240 bar 2 circuits Coolant / Production Through-spindle coolant (TSC) 40 bar Coolant system 980 liters Chip conveyor Cooling nozzle Rotary union for spindle Compressed air for linear measuring systems Blow-out air through the spindle center Blow-out air selectable via M-function Maintained compressed air with low oil content Measuring technology Infrared measuring probe HEIDENHAIN TS 649 DMG Prodpfez Elfksx Aazsb Laser tool breakage measurement Additional standard equipment Automatic working area doors 2 rotating viewing windows 4-color signal light Electronic handwheel Operating mode 4 / Process monitoring Safety package in case of power failure Overvoltage protection Undervoltage monitoring Fast brake control Torque support HSK-A63 / SK40 / CAT40 Tool package for aluminum machining DMG Messenger Web DMG Netservice Client

Condition: not inspected (used), Year of construction: 1999, cutting width (max.): 360 mm, overall weight: 2,500 kg, cutting capacity, maximum diameter 360 mm roller tables Psdpfx Aezbrnbsazsrb chip conveyor weight 2500 kg

Condition: used, Year of construction: 2013, turning diameter 360 mm turning length 1000 mm Prsdpfx Aaszfqi Rozeb swing diameter over bed slide 215 mm reus 30 - 3000 U/min spindle bore 38 mm feed längs 0,043 - 0,653 m/min total power requirement 3,5 kW weight of the machine ca. 1500 kg dimensions of the machine ca. 1900 x 900 x 1300 mm

Condition: good (used), Year of construction: 2021, Used edgebander SCM Olimpic K360 - 11 m/min - 8 - 60 mm panel thickness - 0.4 - 6 mm edge thickness - machine length approx. 4,200 mm - weight approx. 1,200 kg - immediately available Podpfoyrrpmox Aazorb - few operating hours/metres (see photo) If you have any questions, please let us know.

Condition: like new (used), Year of construction: 2006, For sale: Huvema HU 360 x 1000 VAC conventional lathe, manufactured in 2006. This Huvema lathe is a robust and versatile machine for various metalworking operations. With a maximum turning diameter of approximately 360 mm and a turning length of 1000 mm, the machine is suitable for both general turning work and maintenance and repair tasks. The lathe is designed as a conventional machine, making it practical and easy to operate. The Huvema HU 360 x 1000 VAC is suitable for professional workshops, machine construction companies, maintenance companies, and metalworking businesses. Specifications Turning diameter over bed: 360 mm Turning length: 1,000 mm Turning diameter over cross slide: 220 mm Spindle bore: 38 mm Spindle speed: 30 – 2,200 rpm Motor power: 2.5 kW Voltage: 400 V Tailstock spindle: MK3 Tailstock diameter: 45 mm Prjdpfxjzwpfnj Aazob Tailstock travel: 110 mm Number of feeds: 40 Metric thread cutting: 0.4 – 7 mm Spindle nose: D1-4 / Camlock Dimensions Length: approx. 1,920 mm Width: approx. 920 mm Height: approx. 1,298 mm Weight: approx. 750 kg

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Prsdpfx Aottakhsazsb Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: used, Year of construction: 2026, functionality: fully functional, empty load weight: 240 kg, load capacity: 2,500 kg, Rotary device ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: very good Predpfxszwyf Ee Aazob Description: Good working condition, ready for use, as returned by the previous owner.

Year of construction: 2020, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 12000 mm TRANSVERSAL TRAVEL: 1600 mm VERTICAL TRAVEL: 3600 mm RAPID FEEDS L-T-V: 30 m/min TABLE SIZE: 13000 x 2500 x 300 mm SPINDLE: 450 - 5000 rpm; 34 kW; 830 Nm; ISO 50 HEAD: UNIVERSAL AUTOMATIC A/B AXIS ; MILLESIMAL POSITIONING TOOL MAGAZINE: CHAIN-TYPE ; 100 POS CONTROL UNIT: HEIDENHAIN TNC 640 Prodpfx Aaezbnr Aozob HIGH PRESSURE COOLANT: 40 Bar WEIGHT: 87480 Kg ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; LASER TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL NOTE: ROTARY TABLE 1500X1500, 1,5 rpm, MAX ADMITTED LOAD 15.000 Kg; HEAD LOADING/UNLOADING DOUBLE CRADLE; MOBILE WORKING PLATFORM; PERIMETER FENCES; STATIC RTCP OF ROTATING TABLES; STATIC RTCP IN THE SPACE ; AUTOCAL; VIBRATION DETECTION PROBE; COOLING TANK 1500L; GREEN MODE FUNCTION

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,000 h, functionality: fully functional, load capacity: 3 kg, arm reach: 1,130 mm, No minimum price – guaranteed sale to the highest bidder! Auction of two ABB IRB 360 (Flexpicker) robots including vision system! TECHNICAL DETAILS Payload: 3 kg Working area diameter: 1,130 mm Positional repeatability: 0.03–0.1 mm Path repeatability: 0.1–0.33 mm MACHINE DETAILS Weight: 120 kg Supply voltage: 200–600 V Supply frequency: 60 Hz Power consumption at maximum load: 0.477 kW Payload for pick-and-place cycle: 1 kg Ambient temperature: 0 to +45 °C Relative humidity: max. 95 % Noise level: < 70 dB(A) Emissions: EMC/EMI shielded Operating hours: 6,000 h Predpfx Aasznh T Ejzjb

Year of construction: 2020, condition: ready for operation (used), A Vollmer CNC 5-axis tool grinding machine for the manufacture and regrinding of solid carbide rotary tools is available. Grinding spindle interface: HSK50, max. workpiece diameter: 100mm, max. workpiece length: 360mm, max. grinding wheel diameter: 150mm, travel X/Y/Z: 350mm/450mm/500mm, workpiece magazine: pallet magazine, workpiece capacity: 272. Machine dimensions X/Y/Z: approx. 2650mm/2800mm/2200mm, weight: approx. 5550kg, control system: Vollmer. Including automatic workpiece magazine HP160. Documentation available. An on-site inspection is possible. Podpfx Aaszg Ir Eezerb

Condition: as good as new (ex-display), Year of construction: 2000, functionality: fully functional, GRABENER toggle press for sale type GK 360 power 360 tons distance between uprights 700 mechanical ejector 35 strokes/minute stroke 120 millimetres slide adjustment 40 mm maximum table height 650 Podpfx Ajrt Uz Ajazorb French standards APAVE control visible in good working order

Year of construction: 2016, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH 360 Year: 2016 Width: 36 cm Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Conveyor: Entry conveyor belt – Motor: 0.25 kW – three-phase 400V – Product guidance via stainless steel comb Conveyor: Outfeed belt – Motor: 0.37 kW – three-phase 400V – Integrated air blow-off ramp Cutting unit – Cutting wheel Ø350 mm – 3 blade holders (45° and 90°) – 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – Option to add more – Rotation speed: 72 rpm – Motor: 0.37 kW – three-phase 400V – Guide with stainless steel bearings – Cutting kit available: 90° and 45° Pedpfxey Hdqae Aazorb Product orientation kit: 1 symmetrical set, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function – Non-motorised stainless steel roller, Ø140 x 350 mm – Gap adjustment: manual – Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: used, KUKA AG Central Hand KR360 R2830, 00226914, ZH 360 4 Model: 00226914 Type: ZH3604 Condition: Used General information: Robotic wrist / Axis group 4-6 Heavy-duty, precise subunit for the hand axes A4, A5 and A6 Psdpfew Ex Idsx Aazerb Serial number: 003296 Paintwork: KUKA standard paint (orange, similar to RAL 2003) Suitable for: KUKA KR 360 R2830 Removed from Kuka KR360 R2830 Without oil (drained)

Condition: used, mileage: 61,050 km, power: 105 kW (142.76 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle no.: 1617X ----Why autonext? Over 400 immediately available cars & commercial vehicles. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options available. Complete vehicle range available at autonext? Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Top condition! 1st owner, German vehicle, non-smoking vehicle Complete service history exclusively at Mercedes Benz Next service in 24,800 km Number of seats: 3 Trailer coupling Multimedia system MBUX (touchscreen 10.25) Parking package with 360° camera Navigation system Blind Spot Assist Seat heating Regulated air conditioning (Tempmatik) Instrument cluster with color display Increased payload due to reinforced rear axle suspension ---- Special equipment: * Multimedia system MBUX (touchscreen 10.25" with navigation) Pedpfxez Hhpno Aazerb * Voice control system (Linguatronic) * Hands-free system Bluetooth * WLAN hotspot * Steering wheel with multifunction * Parking package with 360° camera * 360-degree camera system * Trailer coupling: fixed ball head * Regulated air conditioning (Tempmatik) * 3-button remote control for central locking * Armrest, driver and passenger door * Exterior mirrors, electrically foldable * Exterior mirrors with blind spot assist * Passenger-optimized center console (without storage compartment in center console on the right) * Driving assistance system: traffic sign recognition * Suspension: stabilization level II * Rear axle suspension: increased payload * Additional main key * Wooden floor in the loading area * Folding cover for storage compartment * Folding cover for storage compartments left/right * Instrument cluster with color display * Cable duct on rear portal * Cable duct on side wall * Marking lights on the side * Metallic paint * Tire pressure monitoring system * Spare wheel in driving condition * Spare wheel holder under frame end including jack * Socket (12V connection) in the loading/passenger compartment * Fuel tank lid red * Paneling in the loading/passenger compartment: wood, high (up to the roof) * Fleece battery 92 Ah * Front axle reinforced * Seat heating for driver * Seat heating for passenger Standard equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag on the passenger side, airbag on the driver side, hill-start assist, trailer socket 13-pin, anti-lock braking system (ABS), traction control system (ASR), drive type: front-wheel drive, display for washer fluid level, exterior mirrors, electrically adjustable and heated, both, outside temperature display, brake assist, DAB tuner (digital radio reception), roof lining in the driver's cab, ceiling light in the loading area with door contact, automatic switching on of driving lights, entry handle on the rear pillar on the right, entry handle for the sliding door on the bulkhead, electronic brake force distribution (EBV), electronic stability program (ESP), driving assistance system: side wind assist, electric windows 2-way, generator 230 A, cruise control, 6-speed gearbox - FSG, rear door (opening angle 270 degrees), body/superstructure: high-roof standard van, keyless start, child lock, communication module (LTE) for digital services, fuel tank: main tank 92 liters, loading package dashboard (USB connections and 12V socket)

Condition: used, Liquid chiller, cooling unit, Used machine Manufacturer: Hoffmann Type: ERK 360-H Overall dimensions: Predpfoyzywlsx Aazjb Width: 2200 mm Depth: 1000 mm Height: 2450 mm Year of manufacture: 1996 Cooling capacity: 36,000 kcal/h Refrigerant: R134A – 20 kg Max. operating pressure: 17 bar Electrical data: 400V; 17 kW

Condition: excellent (used), Direct from closed ready meals manufacturer in London. Psdpfjywpb Ssx Aazorb

Condition: used, Year of construction: 2012, TGW belt conveyor belt transfer GF 3520-490-360 RA2034 Technical data: Conveying length (NL): 3520 mm Framework width (NB): 490 mm belt width (GuB): 360 mm height (BH): 115 mm, 330 with Motor support feet: optionally available Conveying speed (v m/s): no Motor at the moment, contact us with your needed conveying speed Drive: SEW gear motor Electrical data: 50Hz V380-500, kW dipends on the Speed Year of construction: 2012 Optionally available: Frequency converter Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Prjdpfx Aer Ht I Soazsb Your specialist and contact for intralogistics

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: Machine with PLC control Feed rate: 12/16 m/min Edge feeder for roll and strip material, automatic 1901 Glue application unit, cartridge 1906, with sensing nozzle Pneumatic pressure unit, motorised adjustment to edge thickness 1926 Trimming unit, twin-motor, pneumatically swivelling 1918 Rigid milling unit up to 30 mm, 1962 MOT 5 milling unit with multifunction capabilities: flush, radius, chamfer, 1966 Radius scraper 1927 Corner copying machine 1983 Surface scraper 1964 1944 sanding unit Blow moulding nozzles Technical specifications: Workpiece thickness min./max.: 6/60 mm Prodpfszk N Hrjx Aazeb Workpiece width min. 60 mm Minimum workpiece length: 140 mm Maximum gluing thickness: 13 mm Weight: 1,350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: at short notice

Condition: as good as new (ex-display), machine/vehicle number: MCC101A260T7E00B, Manufacturer: Danfoss Product type: VLT MCC 101 sine-wave output filter Type code: MCC101A260T7E00B Part number: 130B4125 Input/output voltage: 3 × 525–690 V Rated current: 260 A at 50 Hz Psdpfozw Enxjx Aazjrb Rated current: 246 A at 60 Hz Rated current: 195 A at 100 Hz Frequency: 50/60 Hz Maximum output frequency: 100 Hz Switching frequency: 2 kHz Inductance: 480 µH Capacitance: 198 µF Power loss: 1,300 W Protection class: IP00 / open chassis Maximum ambient temperature: 45 °C Weight: approximately 315 kg Serial number: 000168-423 Made in Germany CE and UL marked The Danfoss VLT MCC 101 sine-wave filter is designed for installation on the output side of a frequency converter. It suppresses the switching-frequency component and provides a near-sinusoidal motor voltage, reducing stress on motor insulation and bearings as well as audible motor noise. Suitable for industrial high-power drive applications and use with compatible Danfoss VLT frequency converters. Condition: Surplus unit. Please refer to the photographs for the actual condition and scope of supply. The buyer is responsible for verifying compatibility with the intended frequency converter, motor and application.

Condition: as good as new (ex-display), Year of construction: 2008, operating hours: 133 h, functionality: fully functional, load capacity: 3 kg, arm reach: 1,130 mm, controller manufacturer: ABB, controller model: IRC5, ABB IRB 360-3/1130 FlexPicker delta robot complete with IRC5 controller and machine vision system – Only 133 Operating Hours. The robot is capable of identifying randomly oriented products and picking them directly from a moving conveyor using ABB Conveyor Tracking and integrated vision technology. Ideal for: Pick & Place applications Food processing and packaging Confectionery industry Pharmaceutical products Plastic components handling Product sorting and orientation High-speed automation projects Condition Ex-display machine Only 133 operating hours New OEM battery installed Robot joints lubricated Robot calibrated Fully tested and ready for installation Scope of Supply ABB IRB 360-3/1130 FlexPicker robot ABB IRC5 controller Machine vision camera FlexPendant Complete cable set Robot stand / aluminium frame structure Installed Software Options Conveyor Tracking (606-1) DeviceNet Master/Slave Advanced RAPID PC Interface Socket Messaging Fieldbus Command Interface Prodpozcp Egofx Aazsb World Zones Path Recovery Independent Axis Logical Cross Connections Analog Signal Interrupt Electronically Linked Motors Fixed Position Events Multiple Axis Positioner Key Advantages Complete vision-guided FlexPicker package Conveyor Tracking included IRC5 controller Very low operating hours (133 h) Serviced and calibrated Ready for integration into production lines Additional photos, videos and controller backup available upon request.

Condition: used, mileage: 960 km, power: 265 kW (360.30 HP), first registration: 12/2025, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: automatic, loading space width: 2,450 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, municipal new vehicle with day registration, Iveco T-Way 360 AD BL 4x4 tipper, wheelbase 3.80 m, with Meiller winter service hydraulics, front mounting plate, winter service lighting, air-suspended rear axle, differential lock on front and rear axles, Euro 6 E engine, automatic transmission, pneumatic rear tailgate locking system on the rear drop gate, AHK coupling Rockinger, switchable ABS, tipping hydraulics connections, reversing camera, air conditioning, and more. Equipment: Mileage approx. 960 delivery kilometers 18,000 kg permissible total weight 21,000 kg technically permissible total weight for winter service 9,000 kg permissible front axle load 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load Winter service hydraulics, Meiller Front mounting plate with hydraulic connections, Meiller Winter service lighting AD Active Day cab Wheelbase 3,800 mm Euro 6 E engine with 360 hp and 1,850 Nm of torque 4x4 drive Differential lock in front and rear axles Meiller 3-way tipper approx. 4.80 m x 2.45 m x 0.60 m high Front wall approx. 1.15 m high, with chute 6 lashing eyes, fully retractable in the floor panel Rear tipping bridge with pneumatic claw locking system ZF-TraXon 12 TX automatic transmission Transfer case with reduction gear Air conditioning AHK coupling Rockinger with compressed air connections 2 tipping hydraulics connections at the rear Front axle with leaf springs and rear axle with air suspension Shock absorbers and stabilizers on front and rear axles Hill start assist Rocking function Blind spot assistant Lane keeping assist Podpoz Dmfvefx Aazorb Emergency braking assistant EBS with ABS and ASR ABS switchable Cruise control Sun visor Reversing camera Multi-function steering wheel Driver's seat with air suspension Electrically adjustable and heated exterior mirrors Electric windows municipal new vehicle with day registration on December 19, 2025 Price NET, plus 19% VAT. We will gladly send you attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2617

Condition: used, mileage: 960 km, power: 265 kW (360.30 HP), first registration: 12/2025, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: automatic, loading space width: 2,450 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, municipal new vehicle with day registration, Iveco T-Way 360 AD BL 4x4 tipper, wheelbase 3.80 m, with Meiller winter service hydraulics, front mounting plate, winter service lighting, air-suspended rear axle, differential lock on front and rear axles, Euro 6 E engine, automatic transmission, pneumatic rear tailgate locking system on the rear drop gate, AHK coupling Rockinger, switchable ABS, tipping hydraulics connections, reversing camera, air conditioning, and more. Equipment: Mileage approx. 960 delivery kilometers 18,000 kg permissible total weight 21,000 kg technically permissible total weight for winter service 9,000 kg permissible front axle load 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load Winter service hydraulics, Meiller Front mounting plate with hydraulic connections, Meiller Winter service lighting AD Active Day cab Wheelbase 3,800 mm Euro 6 E engine with 360 hp and 1,850 Nm of torque 4x4 drive Differential lock in front and rear axles Meiller 3-way tipper approx. 4.80 m x 2.45 m x 0.60 m high Front wall approx. 1.15 m high, with chute 6 lashing eyes, fully retractable in the floor panel Rear tipping bridge with pneumatic claw locking system ZF-TraXon 12 TX automatic transmission Transfer case with reduction gear Air conditioning AHK coupling Rockinger with compressed air connections 2 tipping hydraulics connections at the rear Front axle with leaf springs and rear axle with air suspension Shock absorbers and stabilizers on front and rear axles Hill start assist Rocking function Blind spot assistant Lane keeping assist Emergency braking assistant EBS with ABS and ASR ABS switchable Cruise control Sun visor Reversing camera Multi-function steering wheel Driver's seat with air suspension Electrically adjustable and heated exterior mirrors Electric windows municipal new vehicle with day registration on December 19, 2025 Price NET, plus 19% VAT. We will gladly send you attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2617 Psdoz Dmg Topfx Aazjrb

Condition: good (used), mileage: 411,695 km, power: 265 kW (360.30 HP), first registration: 12/2012, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, loading space length: 7,570 mm, loading space width: 2,460 mm, loading space height: 2,550 mm, Year of construction: 2012, Equipment: AdBlue, central locking, cruise control, soot filter, spoiler, tail-lift, = Additional Options and Accessories = - Rear work lights - Front work lights - Heated mirrors Pedpfxeyv U Hws Aazorb - Roof spoiler - Enclosed cab - Cab - Particulate filter = Remarks = Iveco Stralis 360 - 4x2 - Box with side doors - Tail lift - Euro 5 - Full air suspension Model Year: 17-12-2012 Mileage: 411,695 km VIN: WJMA1VPH404395602 Box dimensions: 757 x 246 x 255 cm Tail lift Full air suspension Euro 5 = Additional Information = Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Max. axle load: 8,000 kg; Steered; Tire tread left: 40%; Tire tread right: 40% Rear axle: Tire size: 315/70R22.5; Twin tires; Max. axle load: 13,000 kg; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Kerb weight: 9,895 kg Payload: 9,105 kg Gross vehicle weight: 19,000 kg Tail lift: Zepro, rear door Technical condition: good Cosmetic condition: good

Condition: used, Year of construction: 2003, Technical details: Prodpfjzi Nc Rsx Aazob x-travel: 3600 mm y-travel: 900 mm z-travel: 820 mm b-axis: -100 - +100 ° control: Siemens 840 D tool changer with: 30 Plätze rapid traverse:: 100 m/min rapid traverse:: 60 m/min. table-size: 4200 x 900 mm table load capacity: 4200 kg total power requirement: 92 kW Weight approx.: 30 t dimension machine xH: 4,6 x 8,7 x 3,3 m The DECKEL MAHO DMF 360 Linear is a highly dynamic 5-axis travelling-column machining center designed for the complete machining of large and heavy workpieces. Thanks to the linear drive in the X-axis, the machine achieves very high rapid traverse speeds and reduced non-productive times, making it particularly suitable for toolmaking, mold making, and general mechanical engineering. Travelling-column design for high stability when machining long workpieces Linear drive in the X-axis with rapid traverse speeds up to 100 m/min 5-axis machining with NC swivelling milling head (B-axis) Large travels for machining components longer than 4 meters High precision through direct measuring systems and thermally symmetrical machine design *