Used Oliver Fritz Gmbh & Co. Kg Sandstrahlcontainer High Cube Basic for sale (104,434)

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: Ledpju Thh Eefx Adtork The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2005, operating hours: 15,606 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, power: 30 kW (40.79 HP), volume flow: 160 m³/h, Good day, We hereby offer you, without obligation, a used baler manufactured by Presto GmbH & Co. KG, model HPK 50 B. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (the main control valve on the hydraulic block was replaced) and tested during ongoing operation in both manual and automatic modes. Machine documentation is available in German. Viewing of the press can be arranged by appointment in our workshop. We would be pleased if this machine is of interest to you. Lsdpeyplwfjfx Adtsrk Your service team at Mertens & Frowein GmbH

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Ledpfx Asx R Uzdedterk Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. On site viewing and inspection recommended

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: Lredex A U Ncepfx Adtok • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Lredpfxovtpq He Adtsk Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Lredpfx Aovcqy Uodtsk Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. Lsdpsyz Af Ejfx Adtsrk We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: used, Year of construction: 2000, machine/vehicle number: P18096N, functionality: fully functional, pressing force: 20 t, stroke length: 160 mm, total height: 2,150 mm, overall weight: 180 kg, Good day, We hereby offer you, without obligation, a used workshop press from Rodcraft, model WP 20F. Manufacturer: Rodcraft Pneumatic Tools GmbH & Co. KG Model: WP 20 F Year of manufacture: 2000 Machine No.: P18096N Hydraulic stroke: 160 mm Pressing force: 20 t Machine dimensions: 2150 x 960 x 660 mm Transport dimensions: 2150 x 980 x 750 mm Machine weight: 180 kg Note: The above technical data has been taken from the manufacturer’s brochures or other sources, for which we cannot guarantee the accuracy or completeness. Scope of delivery: 1 unit used workshop press Rodcraft, type WP 20F Application area and condition: The machine was occasionally used in an industrial metalworking shop for pressing out bearings, etc. The machine is fully functional and in good condition. We would be pleased if this machine is of interest to you. Ljdpfeygm N Dox Adtork Your service team at Mertens & Frowein GmbH

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Lsdsyt Nm Sepfx Adterk Number of needle valves surface: 104 Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Condition: excellent (used), Year of construction: 2017, operating hours: 150,050 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: iTNC530, rotary table diameter: 500 mm, overall weight: 13,000 kg, spindle speed (max.): 14,000 rpm, operating hours of spindle: 6,950 h, coolant supply: 20 bar, spindle nose: HSK 63, number of slots in tool magazine: 60, Equipment: chip conveyor, oil mist separator, rotational speed infinitely variable, • Condition: Excellent condition • Operating hours: 6,950 • KESSLER rotary table, Ø 500 mm • Tool magazine: 60 stations, HSK-A63 • Internal coolant supply: 20 bar, with band filter system • Coolant system: Automatic coolant level monitoring • Air through spindle • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe system), incl. workpiece measurement preparation Lsdsx Hg Ibjpfx Adterk • Collision monitoring: POS DCM module • Media feed: 3-channel media feed in the center of the table • Viewing: Rotary inspection window • Handwheel Please send us an inquiry directly via our website if you are interested in the machine. Due to technical reasons, direct inquiries for a quotation via third-party platforms are difficult and may be delayed.

Year of construction: 2020, condition: new, Title Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate and Frame Filter Press – Year 2020 – NEW / Unused Short Description For sale: unused, factory-sealed plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in brand-new condition, have never been commissioned, and remain in their original packaging from the factory. Manufacturer Strassburger Filter GmbH + Co. KG (Germany) Model / Type SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of Manufacture 2020 Serial Number Among others: 032003303920 (additional serial numbers available) Lrsdox Ihufspfx Adtek CE Marking Yes Condition Brand new / unused Factory-sealed Never installed, never used for production Stored in warehouse Quantity Available 4 identical units available New Price Original price €94,000 per unit (Total value for 4 machines: €376,000) Design / Material All stainless steel Plate and frame filter press Gasketed plates Pharma / biotech specification Hydraulic closure incl. hydraulic unit CE-compliant Technical Data Plate format: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Weight (filter frame): approx. 480 kg Weight (plate pack): approx. 120 kg Plate Pack 14 filter plates 13 filter frames 1 end frame 1 partition plate 28 filter layers per setup Hydraulics & Drive Hydraulic closure Hydraulic power unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Solenoid voltage: 24 V DC Compressed air requirement: 3.0 bar Connections Product inlets and outlets: DN25 Vent / drain: DN15 Connections according to DIN 11864-2 Drip tray included Areas of Application Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location Germany Inspection by appointment Immediately available

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material Lrsdpfjndn Agsx Adtsk bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB Ledpfx Adsng Exaotsrk OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 2008, condition: good (used), Machine type: Finishing machine Lrodpfx Aslrt Sajdtsk Manufacturer: Supfina Grieshaber GmbH & Co. KG Model: 622/1 Serial number: 760001 Year of manufacture: 2008 Available immediately Ex site for self disassembly Optionally we can offer dismantling and loading

Condition: new, Year of construction: 2025, Blasting container for blasting glass beads and ceramic balls with drum magnetic separator and stainless steel grating floor. Inner dimensions L=5850 W= 2300. Side Door Open for easy loading with the forklift. Lsdpfx Adjg S Rt Totjrk

Condition: new, Year of construction: 2024, machine/vehicle number: BN120XT-HA-X, JEWELliner "CUT" 120W model series "PremiumPlus" Cutting & Marking in very short working time. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Our engraving laser JEWELliner "CUT" is very usefull to cut precious metals and soft metals till max. thickness of 2.5mm. Thicker metals are possible, please contact us for more informations. More materials to cut or engrave like all metals, ceramic and some plastics, are possible. Applications can found in the jewellery ans also in other production areas. The machine dimension is very compact to integrade simple into a production area. Samples to cut: gold, silver, brass, carbon, aluminium Samples of material to mark: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.15mm character high) - round engraving (engraving on round or bowed surfaces) optional Ljdsf Ul Uiopfx Adterk The main parts of JEWELliner "CUT" ( BN120XT-HA-X ) : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 280x200mm security glass - electrical automatic door opening - emergency button - 180° view area to the marking field - electrical z-axis for automatic focus positioning - configured engraving software Specification: - laser technology: fiber laser - outputpower CW: 120W - available frequency: 2.1 - 6300kHz MOPA - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – bigger or smaller possible - focus range: ca. 2 mm - min character high: 0.3 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L850 x W660 x H680 mm - weight: ca. 80kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Year of construction: 1992, condition: used, Plate heat exchanger for milk processing Ledpfx Aeh Eulgjdtjrk

Year of construction: 2015, condition: used, Waste water neutralisation Capacity: 8 m3/h Ledpfoxbqr Dox Adterk Operation / Control: Control cabinet with touch-screen display / WAGO Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Condition: good (used), Year of construction: 2011, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 643 m³/h, Good day, We hereby offer, subject to prior sale, a used baler including conveyor belt, wire tying stations, and bale chute from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical specifications were taken from the manufacturer's operating manual and brochures; we do not assume any liability for the correctness or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Baler dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Lrsdpfjymmtcex Adtjk Overall installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced with a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH service team

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, lifting height: 10,000 mm, battery voltage: 48 V, empty load weight: 9,000 kg, General information: The HUBTEX 2125-PU/SO with model MQ 40 is an electric multidirectional sideloader with a load capacity of 4 tons and a cross-seat cabin. This forklift is suitable for warehouse areas where maximum flexibility and maneuverability in narrow aisles are required to handle loads of up to 4000 kg. M = Multidirectional steering Q = Cross-seat cabin 40 = 4,000kg 2125 = Series PU = Vulkollan tires SO = fork tilting and lowering, extendable forks to 1500mm, hydraulic fork width adjustment Additional equipment/modifications: - Camera system on the right and left of the forks, with monitor in the cabin - Positioning lasers on the right and left of the forks Lrjdpfjx Aqaqex Adtjk - Soft-stop feature when lowering the forks and when crossing the telescopic fork extension steps

Condition: excellent (used), Stations/Equipment: Unwinder Rewinder Extraction system incl. shredder (4x Lundberg Type WT200-200U - year 2018) Inert enclosure Busbar laminating unit Cutting units Laminating units / adhesive application units Heated rollers Master computer Control cabinets Drive motors Gantry crane Corona treatment Lodpfjxzufhsx Adtork

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Lsdpfexzuiyjx Adtsrk

Year of construction: 2021, condition: new, Aluminum flat conveyor belt without substructure conveyor belt length: 4000mm drive roller: knurled deflection roller: crowned overturned Our core competence is to supply the customer exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and deliver corresponding systems from our own production. Please contact us by phone to find a suitable solution for your application. PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC white FDA compliant according to EU10/2011 Belt width 500mm outside corrugated edge welded on both sides 40mm high T-30 cleats- 400mm pitch * antistatic due to threads in the fabric of the running side endless welded with stepped finger joint food certificate is supplied V2A stainless steel carpet pad plate full surface Lrodpfx Ajhfwcbodtjk drive: motor approx. 1,1KW * optional controllable with frequency converter connection 220/400V

Year of construction: 2021, operating hours: 60 h, condition: good (used), functionality: fully functional, machine/vehicle number: X620DM-WL, We are selling a very good endoscope. As plant engineers, we used the device for endoscopic inspection of weld seams in piping systems. It delivers excellent image quality and is very easy to operate. Unfortunately, the 2-meter probe length is no longer sufficient for our needs, so we need to sell it and purchase a new one with a longer probe. The device is only 3 years old. Details from the order confirmation: Portable Video Endoscope VTec X Series Forward or side view, white light State-of-the-art CMOS camera technology Bright high-resolution 5.5" monitor integrated into the handset Specifications: Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: White light Front LED, 3.22 lm Side LED, 6.45 lm Camera resolution: Front: 1280 x 960 pixels Side: 1280 x 960 pixels Monitor resolution: 1920 x 1080 pixels Bending angle: ≤ 150° ±10 Bending functionality: Controlled via 4-way motorized joystick Power supply: Four Li-Ion batteries (18650) with protection circuit or via power adapter Environmental conditions, protection class, and weight: Handset: -10°C to +50°C, IP 54, 1.50 kg Probe: -20°C to +70°C, IP 67 Included in delivery: Lrodpfxeu Ul A Ne Adtsk Video Endoscope VTec X620DM-WL SD-USB card reader HDMI cable Mini USB data cable including USB power adapter Battery charger including power adapter Power adapter Four Li-Ion batteries (18650) with protection circuit User manual Transport case Rigid Shaft Adapter with Handle for 6 mm Video Endoscopes Working length of shaft: 350 mm Includes mount for 1/4" tripod thread

Condition: used, Year of construction: 2018, functionality: fully functional, volume flow: 10.2 m³/h, input voltage: 230 V, USED VACUUM PUMP Technical data Max. pumping speed 50 Hz (mbar) 8.9 m3/h Ledpsw Rqx Dsfx Adtjrk Max. pumping speed 60 Hz (cfm) 6.0 cfm Ultimate vacuum 2 x 10-3 mbar / 1.5 x 10-3 torr Ultimate vacumm with gas ballast 1 x 10-2 mbar / 0.75 x 10-2 torr Ultimate partial vacuum without gas ballast 4 x 10-4 mbar / 3 x 10-4 torr Water vapor tolerance 40 mbar / 30 torr Number of stages 2 Permissible ambient temperature range (operation) 15 - 40 °C Permissible ambient temperature range (storage) -10 - 60 °C Max. outlet pressure (abs.) 1.1 bar Oil capacity min./max. 0.45 / 0.85 l Inlet connection small flange KF DN 25 Outlet connection small flange KF DN 25 Rated motor power 0.30 kW Rated speed 50/60 Hz 1500/1800 min-1 Protection class IEC 60529 IP 40 Dimensions (L x W x H) 503 mm x 156 mm x 240 mm Weight 24.8 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) - 52 dBA NRTL certification - No