Used Pendraulik Dissolver for sale (64)

Year of construction: 2016, operating hours: 10 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 09/2016 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) Gjdpfx Ansvtf Are Iekb - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Year of construction: 2020, condition: new, machine/vehicle number: 6159326350, We are dissolving part of our demonstration tool inventory: Desoutter ESP1 control for SLBN low-voltage screwdrivers Year of manufacture: 11/2020 Article no.: 6159326350 new, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN003 Gksdpfx Anjv Iqcgo Ieb -SLBN010 -SLBN012 -SLBN020 The ESP1 control was developed to optimize the performance of Desoutter screwdrivers and offers two speed ranges while reducing energy consumption. Advantages: With 2 speed options, the ESP1 offers flexibility to optimize your screwing process and ensure lasting quality. Compatible with 100V or 240V inputs for a standardized platform, faster readjustments and lower total cost of ownership. Other tools for industrial manufacturing and maintenance on request.

Condition: used, Year of construction: 2015, machine/vehicle number: MR007049, Used: SCM edge banding machine, in very good condition. Complete machine, ready for immediate use. Used: Edge banding machine, manufactured by SCM – model Olimpic K360 T-ER13 Equipped with the following options: - Machine complies with European CE standards - Anti-adhesion spray unit AAR - Glue scraper unit RC-V - Brush unit SP-V - Touch 7 control – 7'' touchscreen control (including the ability to store up to 60 programs) - AUTOSET for T-ER1 3 positions for R-K flush-trimming unit 2 positions for round-over unit pneumatic on/off switching of the glue scraper unit - Nesting sensors for the machining units The machine is equipped with the following units: – Pre-milling unit with 2 motors – with compressed air cleaning after milling – Spray unit, sprays after pre-milling, to prevent adhesion of the glue to the surface. Gkedozgwzvepfx An Isb – Glue unit, with dual temperature setting for selecting, for example, PU and EVA glue. – Trimming unit for cutting off the edge band. – Milling unit with solid guide rollers, for a perfect milling operation along the surface. – Round-over unit, for milling rounded edges or bevels. – Radius scraper unit for a perfectly smooth finish (R=2). – Spray unit, for dissolving the glue and applying a sheen. – Glue scraper unit, for removing glue residues on the surface. – Brush unit for polishing the glued edge. Technical specifications: - Min./max. band thickness: 0.3-3 mm - Feed speeds: 11 m/min - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Weight: 1433 kg - Serial number: AH/118707

Condition: used, This listing is for a Jenway 3540 pH & Conductivity Meter. The unit is in full working condition and is ready for immediate release. The Jenway 3540 is a versatile combined pH and conductivity meter tailored for water testing applications in laboratories. Its compact design and dual functionality make it an excellent choice for efficient analysis of both parameters. Key Features: - Conductivity Measurement Range: Measures conductivity from 0.01 μS/cm to 1.999 S/cm, suitable for various water quality assessments. - pH Measurement Range: Capable of measuring pH levels from 2 to 20.000, accommodating a wide range of samples. - Temperature Measurement Range: Operates within -10.0 to 105.0°C (14 to 221°F), enabling measurements in diverse environmental conditions. - Versatile Measurement Options: Includes salinity and TDS (Total Dissolved Solids) measurement, resistivity, and ORP/Redox measurement via the pH channel. - Ultra-Pure Water Function: Ensures ideal temperature compensation for precise readings in ultra-pure water applications. - Temperature Compensation: Offers both manual and automatic temperature compensation with an adjustable temperature coefficient (0.00 to 10.00 % per °C). Godpfx Anoyk Dwye Iokb - Adjustable Conductivity-to-TDS Factor: Customize the TDS factor from 0.4 to 1.0 for accurate conversions based on specific sample conditions. - User-Friendly Features: Selectable units for temperature (°C/°F), ready indicator, and measurement hold features enhance usability. - Data Management: Store up to 500 data sets with date and time stamps, ensuring comprehensive record-keeping. - Output Options: USB or RS232 output enables easy data transfer to software or printers, facilitating analysis and reporting. - GLP-Compliant Data Storage: Maintains compliance with Good Laboratory Practice (GLP) standards for traceability. - Compact Design: Features a built-in stand and wall-mount option, saving valuable lab space. Applications: - Water Quality Testing:Ideal for testing pH and conductivity in drinking water, wastewater, and industrial applications. - Laboratory Research:Useful in laboratories for environmental monitoring and experimental setups requiring precise pH and conductivity measurements. - Aquaculture and Hydroponics:Supports monitoring water parameters critical to fish farming and soil-less cultivation, ensuring optimal growing conditions. SpecificationsManufacturerJenwayModel3540ConditionUsedSerial Number01298Stock Number29042

Condition: used, This listing is for the Mettler Toledo Seven Excellence Multi parameter Metre plus P25 Printer The unit is in full working condition and is ready for immediate use The METTLER TOLEDO SevenExcellence series includes a line of advanced benchtop meters designed for high-precision electrochemical measurements. These meters are ideal for applications in pharmaceuticals, food and beverage quality control, and environmental testing. Key Features Across the Series Measurement Capabilities: Models support pH, conductivity, resistivity, redox/ORP, TDS, salinity, ISFET, ion selective electrodes (ISE), and dissolved oxygen (DO). User Interface & Workflow Optimization: Large touchscreen display for intuitive, efficient navigation. Plain language menu structure eliminates confusion during setup. One-click operation launches one of 17 predefined or 60 customizable methods, boosting throughput. Choose from uFocus™ view, which displays only critical data, or standard view for detailed information including setup and measurements. Data Management: Export results to printers, Excel, or LIMS. Compatible with LabX software for 21 CFR Part 11 compliance and advanced data control. Time and date stamps from a radio-controlled clock ensure compliance with GLP standards. Security & Compliance: User management settings and PIN protection prevent unauthorized method changes. Integrated Sensor Management (ISM®) pH electrodes are automatically recognized and retain their own calibration data—ensuring accuracy even when electrodes are swapped. Modular and Ergonomic Design: Gkodpfxoxhgdps An Isb Electrode arm enables easy one-handed operation and precise vertical movement to reduce spills and save time. Modular construction allows for easy upgrades and expansion as your lab's needs change. Connectivity options include USB, Ethernet, and RS-232 ports for integration with PCs and peripheral devices.

Condition: used, This listing is for one of 2 Sets Mettler Toledo Seven Excellence Multiparameter Meters, each with a Mettler Toledo P25 Printer These units are in full working condition and is ready for immediate use The METTLER TOLEDO SevenExcellence series includes a line of advanced benchtop meters designed for high-precision electrochemical measurements. These meters are ideal for applications in pharmaceuticals, food and beverage quality control, and environmental testing. Key Features Across the Series Measurement Capabilities: Models support pH, conductivity, resistivity, redox/ORP, TDS, salinity, ISFET, ion selective electrodes (ISE), and dissolved oxygen (DO). User Interface & Workflow Optimization: Large touchscreen display for intuitive, efficient navigation. Plain language menu structure eliminates confusion during setup. One-click operation launches one of 17 predefined or 60 customizable methods, boosting throughput. Choose from uFocus™ view, which displays only critical data, or standard view for detailed information including setup and measurements. Data Management: Export results to printers, Excel, or LIMS. Compatible with LabX software for 21 CFR Part 11 compliance and advanced data control. Time and date stamps from a radio-controlled clock ensure compliance with GLP standards. Security & Compliance: User management settings and PIN protection prevent unauthorized method changes. Integrated Sensor Management (ISM®) pH electrodes are automatically recognized and retain their own calibration data—ensuring accuracy even when electrodes are swapped. Modular and Ergonomic Design: Electrode arm enables easy one-handed operation and precise vertical movement to reduce spills and save time. Modular construction allows for easy upgrades and expansion as your lab's needs change. Connectivity options include USB, Ethernet, and RS-232 ports for integration with PCs and peripheral devices. Gksdpexv Adbefx An Iob

Condition: used, This listing is for 1 of 2 Hanna HI 180 Speedsafe Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The Hanna HI 180 Speedsafe Magnetic Stirrer is an excellent choice for laboratories seeking a compact and efficient mixing solution. Here’s a detailed overview of its features and applications: Key Features: Gkedpexxz U Rjfx An Isb Compact and Lightweight Design: Its small footprint makes it perfect for laboratories with limited bench space. Attractive Colour Options: Available in various colours, it allows easy identification of different samples, enhancing workflow efficiency. Electronic Speed Control: Users can easily regulate stirring speed through electronic controls, ensuring precise mixing. Speedsafe Mechanism: This safety feature limits the maximum stirring speed to 1000 rpm, even if the load is suddenly removed. This helps prevent accidents and ensures consistent performance. Durable ABS Housing: The stirrer's housing is constructed from ABS, making it resistant to most harmful chemicals typically found in laboratory environments. Maximum Stirring Capacity: Capable of stirring up to 1 litre, making it suitable for small-scale applications. Performance and Applications: The Hanna HI 180 Speedsafe Magnetic Stirrer is ideal for various light-duty laboratory stirring tasks, such as: Mixing Small Volumes of Liquids: Perfect for preparing solutions in microcentrifuge tubes or small beakers. Dissolving Solids in Solvents: Efficiently mixes solids into liquids, ensuring thorough dissolution. Preparing Samples for Analysis: Excellent for creating homogenous mixtures needed for accurate laboratory testing.

Condition: used, This listing is for the Stuart Scientific SM1 Magnetic Stirrer The unit is not at it's best aesthetically and that is reflected in our pricing, it is however in full working condition and is ready for immediate release. The Stuart Scientific SM1 Magnetic Stirrer is a laboratory bench-top device designed to mix liquids uniformly using a rotating magnetic field. It’s a basic analogue magnetic stirrer often found in educational, research, and routine laboratory settings for mixing solutions, suspensions, or samples without heating Gksdpsx Npnvofx An Iob The SM1 is suitable for everyday laboratory mixing tasks such as: Mixing aqueous solutions, buffers, and reagents. Suspension of particulates or cells. Routine solution preparation and titration support. Because it lacks a heating element, it’s ideal where temperature control isn’t needed, or when stirring only is required (e.g., during dissolving solids into liquids).

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Gkodpfx Aoxhfpden Ijb Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: used, This listing is for the H+P Komet Variomag Poly 15 Magnetic Stirrer The unit is in full working condition and is ready for immediate use The Variomag Poly 15 is a precision-engineered, 15-position direct-controlled magnetic stirrer built for laboratory applications requiring simultaneous mixing of multiple samples. Developed by Variomag-USA (2mag GmbH, Germany), this stirrer is ideal for chemical, microbiological, biotechnical, and medical environments. Gedpfx Asxl E Izen Iokb Core Features Direct-Controlled Operation: Offers simple, immediate speed control for easy use. Inductive Drive: Wear-free and low-maintenance magnetic induction ensures quiet, long-lasting operation. Digital Speed Control: Microprocessor-based for consistent performance, with memory recall for repeated tasks. Soft Start Function: Prevents splash and ensures gentle acceleration to protect magnetic coupling. Simultaneous Stirring: Ideal for processing multiple Erlenmeyer flasks or beakers at once—up to 15 × 250 mL or 6 × 1 L vessels. Typical Applications The POLY 15 is designed for a wide range of laboratory tasks, such as: Growing micro-organisms (e.g., aeration and culturing bacterial cultures) Dissolving nutrient media and solids Preventing settling of suspended particles Performing titrations General liquid mixing in R&D, pharma, food science, and education labs

Condition: excellent (used), Double-Jacketed Mixing Vessel / Pot – 650 L – Stainless Steel Industrial mixing vessel / pot with a capacity of 650 liters, made of stainless steel, equipped with a double jacket for heat treatment and a mixing system, designed for the preparation, mixing, heating, and homogenization of food products in industrial batch processes. The equipment combines a 650-liter vertical vessel with a motorized agitator and a double jacket, allowing mixing and heat treatment operations to be carried out in a single container. Its design is particularly suitable for products that need to be kept in motion during heating to achieve a uniform distribution of ingredients and temperature. MAIN FEATURES -Type: Industrial mixing vessel / pot with agitator -Capacity: 650 liters -Vertical configuration -Double jacket for heat treatment -Integrated mixing system -Agitator with motorized drive -Mixing and homogenization of the product -Stainless steel construction -Large-capacity process vessel -Curved bottom -Sanitary product connections -Bottom discharge -Robust structure on legs -Designed for batch processing -Hygienic construction for the food industry -Integrable into existing production lines PROCESS The vessel is designed to receive the ingredients and continuously mix them using the internal agitator. Gksdpfozxcd Hex An Isb The double jacket allows for heat treatment of the product, which can be used for heating, temperature maintenance, or cooking operations, depending on the product and the available thermal services. Agitation during the process promotes homogenization of the ingredients and a more uniform distribution of the temperature, making it particularly useful for liquid, semi-liquid, and viscous products. It can be used for: Mixing and homogenization Heating Cooking Temperature maintenance Dissolving ingredients Preparation of formulations Production of sauces, creams, and purees Preparation of fillings and formulated products APPLICATIONS Especially suitable for canning industries, sauce manufacturers, ready-meal producers, vegetable product manufacturers, cream and puree manufacturers, filling manufacturers, and other food industries that require a versatile mixing and heat treatment equipment. The combination of a 650-liter capacity, double jacket, motorized agitator, and stainless steel construction provides a robust solution for industrial processes involving preparation, cooking, and mixing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), FOR SALE: Complete Automatic Production Line for Paints, Primers, Undercoats, and Acrylic Plasters - DIAMAC (Italy) For sale: a highly efficient, professional industrial line from the renowned Italian manufacturer DIAMAC. The installation is in ideal condition - it has been used only a dozen times. KEY ADVANTAGES & WORKFLOW: Continuous production cycle (zero downtime): While the operator unloads the first tank via the filling line, the next batch of finished product is being prepared in the second dissolver. Complete system: The installation comes fully equipped with all necessary pumps, transport pipelines, filters, and electrical control cabinets. Full documentation: The machines include a complete set of design drawings, electrical schematics, technical documentation, operating manuals, and CE certificates. PRODUCTION LINE COMPONENTS: Main Dissolver Unit: 2 x Stationary Dissolver 50 HP (2 x 1500 L) with Inverter: Mounted on a high steel support structure (platform + stairs) Made of stainless / acid-resistant steel (INOX) Automatic control and cycle programming Automated dosing/filling for water, 4 types of resins, and dry/powder raw materials Integrated washing system: automatic water supply for tank cleaning + discharge of wastewater to separators (allows reuse of purified water) Direct connection to the semi-automatic filling machine Stationary Dissolver 30 HP with Inverter (2500 L) Slow-speed Stationary Mixer 10 HP (6000 L) Column Dissolver 15 HP with Inverter + dedicated tank/vessel Laboratory Dissolver 2 HP with Inverter (stepless speed adjustment for testing and formulation) Industrial Tinting System (Dosing & Coloring Unit): High steel support structure with 16 INOX stainless steel tanks and slow-speed mixers. Application: production of colored paints or multi-component specialty products (up to 16 additives). Upgrade options: Currently configured for manual operation, but fully prepared for semi-automatic production (gravimetric/volumetric dispensers) or fully automatic production (by connecting an optional PLC + dispensers/flow meters to generate color formulas via PC). Packaging & Filling Unit: DIAMAC mod. DPC30 semi-automatic liquid filling machine: Designed for packaging finished products into containers (buckets, cans, etc.) Can be permanently connected to the main 50 HP stationary dissolvers Gsdpfx Ansztwp Hs Iokb ADDITIONAL INFORMATION: Option to purchase additional auxiliary equipment. Equipment is ready for inspection and transport. Please feel free to contact me for further details, pricing, or to arrange an inspection.

Year of construction: 1988, condition: ready for operation (used), functionality: fully functional, usable tank capacity: 400 l, rotational speed (max.): 3,000 rpm, Process plant for the production of emulsions, creams, ointments, pastes, lotions, suppository masses. The plant consists of the following components: - Heatable stainless steel vessel with double jacket - Lifting column for hydraulic raising and lowering of the lid - Swiveling control panel - Steel housing with hydraulic and vacuum pump for water circulation - Discharge device for the jacket TECHNICAL DETAILS Usable volume: 400 l Total volume: 480 l Minimum volume: 105 l Mixing unit speeds Anchor scraper agitator (1.5 kW): 20 rpm Toothed colloid mill (5.5 kW): 3,000 rpm Dissolver (5.5 kW): 1,500 rpm Disc diameter: 250 mm Connection diameter: NW 32 mm MACHINE DETAILS Motor power hydraulic pump: 1.1 kW Motor power SIHI vacuum pump: 1.5 kW EQUIPMENT - Thermostats and solenoid valves for temperature control - Fryma type PK 84/25 discharge pump - Sight glass with lighting and wiper - Diaphragm vacuum gauge Gksdpfx Anoxt E Iqj Iob - Connection for external compressed air supply - Ventilation device - Cleaning wash nozzles

Condition: used, Year of construction: 1992, The CO2 target value is entered on the digital controller, causing the CO2 metering valve to open accordingly. The CO2 is introduced into the product stream via an injector and then dissolved and bound in the saturation section. The amount of CO2 in the beverage is monitored by a CO2 analyser and computer. The actual value is automatically compared with the target value and corrected via the CO2 valve if necessary. A CO2 recorder records the actual value. Additional title: impregnation plant Capacity: 20000 l/h Gjdpfsxzqufex An Iokb Final CO2 content value (operating value) up to: 7 g/l Material: stainless steel Features: CO2 injection; settling section; control cabinet with user interface for CO2 control and CO2 recorder; various pipes, valves, measurement technology