Used Pinheiro Ama2 310 for sale (2,133)

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially with the fire department and then with the municipal depot. This vehicle has a civilian truck registration as a "closed-body truck" and the papers indicate a total of 9 seats. The vehicle was initially used as a multipurpose vehicle (MZF), and later the municipality's lawnmower was transported in it. Only one bench seat is permanently installed. Two of the three bench seats were not needed in recent years and are included as loose items. The seatbelts and mounting screws are also included in their original condition. A folding table with a radio headset is still mounted on the left side, and an original large fire department first-aid kit is integrated into the interior. Engine: OM 602, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and initially runs smoothly, but after approximately 20 seconds of idling, the idling performance deteriorates significantly, and smoke starts to appear. When the engine reaches operating temperature, the smoke decreases, and the engine runs smoothly again, almost normally. The engine is either severely worn or has an engine malfunction. No precise diagnosis has been made yet. The vehicle starts immediately and functions well, and the usual engine power was fully available during a short test drive, but we do not guarantee its drivability. A repair is certainly necessary in the short term! For driving short distances or loading onto a RORO ship in the port heading to Africa, this 310 D appears to function without any problems. 5-speed manual transmission. 127 km/h. Csdpfjyx N Hqox Al Ashc Ball-type trailer hitch with a 2000 kg braked or 750 kg unbraked towing capacity. Power steering. Original Mercedes/Eberspächer auxiliary heater (operational). Body with individual rust spots; overall, it is still relatively well-preserved due to being stored in a garage for many years. The window of the passenger door is damaged and covered with a film. The paintwork has been repaired in black around the lower part of the vehicle. Apparently, the car was always very well maintained at the fire department, but unfortunately not afterwards! The running board on the sliding door – which is still visible in the photos – has been removed for use on another vehicle and is no longer present. Unladen weight: 2370 kg. Permissible total weight: 3200 kg. Overall vehicle dimensions: Length 5345 mm / Width 1975 mm / Height 2680 mm. The tires (205R14C) are from 2013 and are not porous, with approximately 50-60% tread depth. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unaltered base for restoration. The TÜV (technical inspection) expired in 12/2025 and will not be renewed. We have deliberately kept the purchase price attractive, as comparable vehicles in good condition are now usually sold for twice the price or even higher. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for commercial businesses, freelancers, and emergency services of all kinds. Unfortunately, sales to private end consumers are generally excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT (according to §25a UStG / differential taxation).

Year of construction: 2011, condition: ready for operation (used), Swing diameter over bed/facing slide: 330mm/260mm, max. turning diameter: 200mm, max. turning length: 450mm, travel X/Z: 160mm/450mm, rapid traverse: 30m/min, speed: 5000rpm, tool stations: 12, tool holder: VDI30, max. workpiece weight: 100kg. Machine dimensions X/Y/Z: approx. 3300mm/1750mm/2400mm, weight: approx. 3800kg. Documentation available. An on-site inspection is possible. Chedpfx Aljzdkphj Asc

Condition: used, mileage: 604,619 km, power: 228 kW (309.99 HP), first registration: 08/2015, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 10/2026, emission class: euro6, color: white, Year of construction: 2015, Equipment: ABS, air conditioning, parking heater,

Condition: excellent (used), Conventional lathe Manufacturer: ZMM Sliven Huvema Inventory No. 3855 Type HU310 x 750 Year of manufacture 2007 Distance between centers 750 mm Center height 155 mm Swinging diameter over bed 310 mm Spindle bore 32 mm Cjdpfszlx Nlox Al Ashc 3-jaw chuck Quick-change tool holder Voltage 380 V Machine weight approx. 700 kg

Condition: excellent (used), mileage: 932,527 km, power: 228 kW (309.99 HP), first registration: 05/2012, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 10,300 mm, total width: 2,600 mm, Year of construction: 2012, WJME2NNH404393034 Cool unit brand: Carrier = More information = Technical information Number of cylinders: 6 Engine capacity: 7.790 cc Rear axle 1: Lift axle Weights Empty weight: 11.820 kg Carrying capacity: 15.180 kg GVW: 27.000 kg Functional Cooling engine: diesel and electric Condition Technical condition: very good Visual appearance: very good Identification Registration number: BZ-XL-87 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Csdpfx Alsymqgge Aohc Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: like new (used), functionality: fully functional, conveyor belt length: 2,700 mm, conveyor belt width: 3,100 mm, total height: 2,500 mm, Length 270 cm Width 310 cm Height 250 cm Carrier 3 cm With a large storage container Chedpfxexqgnmo Al Ajc

Condition: excellent (used), mileage: 920,661 km, power: 228 kW (309.99 HP), first registration: 07/2008, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,200 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 8,750 mm, Year of construction: 2008, Equipment: tail-lift, Tailgate Plateau length: 230 cm = More information = General information Number of doors: 2 Cab: single Registration number: 1BYV256 Technical information Engine capacity: 9.365 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 6.880 kg Carrying capacity: 12.120 kg GVW: 19.000 kg Functional Tail lift: dhollandia DHLSU 11, tail lift, 3000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Chjdszqcvmjpfx Al Ajc Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, mileage: 370,000 km, power: 279 kW (379.33 HP), first registration: 06/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, emission class: euro4, Equipment: ABS, air conditioning, Manufacturer Scania Model P380 LB6x2?4 Hvidtved Larsen FlexLine 310 Year 2008 Condition Good Serial Number XLEP6X20005200736 Ref. nr. 527999 Reg. date: 10-06-2008 Hk: 380 Km: 370000 Gearbox: GRS905 Manual Eurotype: 4 Diesel tank: 1 Tank liter: 300 L Cabin type: CP16 Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/80R22.5 - 315/80R22.5 - 315/80R22.5 Cover% left 60% - 60% - 50% Chodpfx Alexlw Efe Aec Front suspension: Air Suspension rear: Air Wheelbase: 4500 mm Toolbox: ? Hydraulic system: ? Total weight: 26000 Kg Net weight: 17510 Kg Load capacity 8490 Kg Manufacturer: Hvidtved Larsen FlexLine 310 Tank capacity: 10,000 L High pressure pump: Uraca KD 716G High pressure capacity: 390 l/min 140 bar High pressure pump hours: 2179 Vacuum pump: Wittig RFW 200 Vacuum capacity: 20,600 l/min no.: Vacuum pump timer: 2660 Remote control: ?

Condition: used, mileage: 139,000 km, power: 77 kW (104.69 HP), first registration: 07/2017, fuel type: diesel, overall weight: 3,140 kg, next inspection (TÜV): 08/2026, color: red, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Body/structure: Panel van double cab standard, LED cargo area lighting Additional features: 3rd brake light, overhead storage compartment in cab, driver’s airbag, traction control system (ASR), audio system: radio/CD player with multi-function display, electrically adjustable and heated exterior mirrors, integrated indicator lights in exterior mirrors, rubber flooring in cargo/passenger area (fully covered), onboard computer, headliner in passenger area, tachometer, electronic brakeforce distribution (EBD), electronic differential lock (EDS), driver assistance system: hill start assist, driver assistance system: emergency brake assist, sliding window in cargo/passenger area: 1st row left, sliding window in cargo/passenger area: 1st row right, 165 A alternator, grab handle B-pillar, rear wing doors without glazing (180-degree opening angle), heater with recirculation function, interior filter: pollen filter, Isofix child seat fixtures, body/structure: high-roof panel van, body variant: medium-high roof, silver radiator grille, partition wall behind 2nd seat row, steering column (steering wheel) adjustable in height and reach, headlight range adjustment, truck registration, engine 2.0 litre – 77 kW TDCi CAT, front and rear parking sensors, manufacturing location: Otosan, wheelbase 3300 mm, full wheel covers, spare wheel matching tire size, low-emission according to Euro 6 emissions standard, right-side sliding door in cargo/passenger area, wide side protective moldings (body cladding), seat package 13: driver's seat (4-way adjustable) – double passenger seat, fabric, seats in cargo/passenger area: 1st row, 3-seat bench, partially painted bumpers, Trend trim, integrated rear step, tinted glazing, half-height trim in cargo/passenger area, second folding remote key. Chedpfx Aljz D Hizj Asc The vehicle is in good condition. New TÜV and emissions test available at an additional cost!

Condition: ready for operation (used), Year of construction: 2008, Theisen & Bonitz tb sprint 310 VP / 304 QSM / 503 stitch- fold- trimming unit 304 QSM Chedpfjxnb Agex Al Aec 2 stitching head Hohner Universal 48/5 front cut stream delivery TB 503 - 2008 - Theisen & Bonitz tb sprint 503 form punching, multiple ups inline with Theisen & Bonitz tb 303 or tb 304, or offline Delivery time: immediately from stock

Condition: used, Year of construction: 2002, Cloos – Robotic welding system with 2 robots and a swivel positioner for MIG welding with a TEKA smoke extraction system. Robot type: ROMAT 310 Number of axes: 6 Payload: 10 kg Repeatability: ± 0.1 mm Working range (spherical): approx. Ø 4100 mm Control system: ROTROL II (one programming handheld device is defective) Mechanical torch cleaning: CMR Welding power source: GLC 353 Quinto Profi Wire feed unit: CK 78 A/R Wire feed system: DUO – DRIVE Connecting hose package: 3.5 m Welding torch: MRW 3802 Welding torch holder: with integrated collision protection Two-station workpiece positioner: HWR-3KDP 5.000 Load on the rotary table, one-sided: 5000 N Load on the rotary table, two-sided: 3000 N Torque for station change: 2900 Nm Torque for rotary table: 800 Nm Diameter of rotary table: 400 mm Clamping length: 4000 mm Max. speed of rotary table: 60° / sec Chsdpfxszrux Ao Al Asc Smoke extraction system: TEKA cartridge filter system / Type TK-ZPF-4-40-DP with extraction hood 2300 x 4800 mm Year of manufacture of the system: 2002 Certificates of conformity are available.

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Chsdpfxeyg Eu Ss Al Asc Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: excellent (used), mileage: 971,464 km, power: 310 kW (421.48 HP), first registration: 05/2012, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: automatic, suspension: other, loading space length: 8,050 mm, loading space width: 2,460 mm, loading space height: 3,650 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electric window regulation, fog lights, parking heater, retarder, spoiler, = Additional options and accessories = Chsdpfezw Hd Iox Al Ajc - Aluminum fuel tank - Intarder - Radio/CD player - Reinforced engine brake - Roof Spoiler - Sun visor = Remarks = Tail lift: Yes TRANSPORT TO ANTWERP 590 EURO = More information = Front axle: Steering; Suspension: parabolic suspension Rear axle: Double wheels; Suspension: air suspension Empty weight: 9.830 kg Carrying capacity: 9.170 kg GVW: 19.000 kg Technical condition: very good Visual appearance: very good

Condition: used, mileage: 267,400 km, first registration: 12/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 2,500 mm, loading space length: 7,980 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2014, Equipment: ABS, air conditioning, tail-lift, * Brand: Polarus, freezer distribution unit body * 2 compartments (3 with a folding partition) * 2 side doors on the right * 3-panel rear door * Carrier 1250 MT refrigeration unit (defective) * 2,000 kg MBB Palfinger tail lift * Fully air-suspended * Short cab * Air conditioning * Heated seats * Euro 6 Chedpfxezwia So Al Asc 3 compartments, refrigeration Compartment 1: L x W x H 6200 mm - 820 mm - 2000 mm Compartment 2: L x W x H 1710 mm - 820 mm - 2000 mm Compartment 3: L x W x H 7940 mm - 1610 mm - 2000 mm Double-leaf doors and tail lift from Palfinger, 2,000 kg load capacity Double side doors on the right – cargo area

Condition: excellent (used), Year of construction: 2013, Used automatic band saw MEP SHARK 310 CNC HS Blade dimensions: 4640x34x1.1 mm Variable blade cutting speed: 15–115 m/min Cutting capacity: round 310 mm, square 310x310 mm Automatic blade tensioner Automatic chip conveyor Cjdpfx Aeyyuxnel Ashc Additional equipment: vertical vise Machine weight: 2200 kg The machine is in excellent condition and will be fully inspected and serviced.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Chodpfoygiafsx Al Ajc Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: used, mileage: 234,629 km, first registration: 11/1953, fuel type: diesel, number of seats: 15, gearing type: automatic, emission class: euro1, color: white, total length: 7,700 mm, total width: 2,300 mm, total height: 3,000 mm, Year of construction: 1953, = Additional options and accessories = - Tachograph Chedpfoy Hwhlex Al Asc = More information = Transmission: 5 gears, Automatic Engine capacity: 3.944 cc Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 50%

Condition: used, Year of construction: 2002, turning diameter over cross slide: 260 mm, turning diameter: 200 mm, spindle speed (max.): 500 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,377 mm, total length: 4,165 mm, total width: 1,594 mm, overall weight: 3,200 kg, bar diameter (max.): 50 mm, For sale is a CNC turning machine with 6 driven tool positions, manufactured by Gildemeister, model CTX 310, from the year 2002. Cedpfozkr Skox Al Aohc The machine is in good condition; of particular note are the low spindle hours and the measuring system. Technical data: Year of manufacture: 2002 Max. spindle speed: 5,000 rpm Speed at constant power: 833-3890 rpm Spindle power: 7.5 kW Chuck diameter: 210 mm Spindle bore: 68.5 mm Distance between centers: 581 mm Center height: 190 mm Diameter over machine bed: 330 mm Diameter over slide: 260 mm Swinging diameter: 200 mm Bar capacity: 50 mm Z-axis travel: 450 mm X-axis travel: 160 mm Rapid traverse Z: 30 m/min Rapid traverse X: 20 m/min Rapid traverse C1: 100 rpm Torque C1: 112 Nm Feed force Z: 4500 N Feed force X: 4500 N Number of axes: 2 Turret with tool drive from Sauter Tool positions: 12 Driven tool positions: 6 Cross-section of tools: 20*20 mm Speed of driven tools: 4200 rpm Power of driven tools: 4.2 kW Footprint (installed): 4,165 * 1,594 * 2,377 mm Footprint (transport): 3,190 * 1,600 * 1,700 mm Weight: approx. 3,200 kg Upon request, transport and loading can be arranged throughout Europe for an additional charge. Prices are plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, mileage: 273,000 km, power: 272 kW (369.82 HP), first registration: 10/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), Manufacturer Scania Model P370 6x2-4 Hvidtved Larsen FlexLine 310 Year 2015 Condition Very good Serial Number YS2P6X20005395210 Ref. nr. 178151 Reg. date: 30-10-2015 Last seen: 13.11.2025 Engine: DC13 116/370 hp Hk: 370 Km: 273000 Gearbox: Opticruise GRS895 Eurotype: 6 Diesel tank: 1 Tank liter: 300 L Rear view camera: ? Air conditioning: ? Cabin type: CP16L Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65R22,5 - 315/80R22,5 - 385/65R22,5 Cover% left 50% Front suspension: Air Suspension rear: Air Wheelbase: 4500 mm Toolbox: ? Total weight: 26000 Kg Net weight: 17025 Kg Load capacity 8975 kg Manufacturer: Hvidtved Larsen FlexLine 310 Cedjzhfcqspfx Al Aehc Tank capacity: 10000 liter with stamp High pressure pump: Uraca KD 718G High pressure capacity: 333 L/min at 170 bar High pressure pump hours: 1474 Vacuum pump: CVS Vacustar W1300 Vacuum capacity: 21.667 l/min with variable hydraulics. Vacuum pump timer: 3250 Remote control: ? Water heater: ?

Condition: used, mileage: 191,000 km, power: 228 kW (309.99 HP), first registration: 12/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total length: 10,250 mm, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 46 m³, loading space length: 7,980 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, Year of construction: 2014, Equipment: ABS, air conditioning, soot filter, tail-lift, * Brand: Polarus deep-freeze distribution body * 2 compartments (3 with a folding partition) * 2 side doors on the right * 3-panel rear door * Carrier 1250 MT refrigeration unit (defective) * 2,000 kg MBB Palfinger tail lift * fully air-suspended * short cab Cjdpfx Aljzwiaro Aehc * air conditioning * heated seats * Euro 6 compliant

Year of construction: 2001, condition: ready for operation (used), Various lettershop and paper converting units are available. 1) MBO ET46 corner conveyor table, year of manufacture: 1991. 2) MBO ET46 corner conveyor table. 3) MBO Z2 knife folding unit. 4) Herzog + Heymann knife folding unit, year of manufacture: 2001. 5) MBO T45-2-X knife folding unit. 6) Böwe 310 Systec cutting module. 7) Nagel Citoborma 490 Vario SBT multi-spindle paper drilling machine. 8) Hunkeler paper unwind stand. 9) Herzog + Heymann shingle delivery, year of manufacture: 2001. 10) MBO FWIII 52/4 folding unit. 11) MBO T45-2-45/4 folding unit. 12) MBO FWIII 52/6 folding unit. 13) Hunkeler ARAW 50/20 paper unwind stand. 14) Böwe separating cutting module. 15) Herzog + Heymann 2-pocket folding unit, year of manufacture: 2006. 16) Herzog + Heymann 4-pocket folding unit, year of manufacture: 2001. An on-site inspection is possible. Csdpfxoziphaj Al Aehc

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, operating hours: 4,452 h, cutting height (max.): 120 mm, cutting depth: 340 mm, main saw diameter: 380 mm, Raimann KR 310 E 340/120 multi-saw with movable disc Codpfsrhig Eox Al Ashc - manufactured in Germany - year of manufacture 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height - four top pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg

Condition: used, functionality: fully functional, mileage: 590,000 km, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, number of seats: 2, Year of construction: 2017, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, lane keeping assist, power assisted steering, power mirror, soot filter, tachograph, tire pressure monitoring, traction control, IVECO Stralis Hi-Street, year 2017, approximately 591,000 km, automatic transmission. 9.30m box body with DHOLLANDIA hydraulic tail lift. Cruise control, rearview camera. USED VEHICLE WITH 12-MONTH WARRANTY. Chedey A S D Tjpfx Al Ajc

Condition: used, mileage: 604,158 km, power: 228 kW (309.99 HP), first registration: 08/2015, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 10/2026, emission class: euro6, color: white, Year of construction: 2015, Equipment: ABS, air conditioning, parking heater,

Condition: used, mileage: 429,351 km, power: 228 kW (309.99 HP), first registration: 08/2015, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro6, color: white, brakes: retarder, Year of construction: 2015, Equipment: ABS, air conditioning, parking heater,