Used Placement Aid for sale (1,286)

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Isdpfx Agozqfx Dsgeba

Condition: good (used), The scope of delivery includes: 01x inlaid shelf grate, used Material color: hot-dip galvanized Total depth: 1.175 mm (supporting bar direction) clear support width: 1.097 mm Total width: 890 mm (cross bar direction) bearing bar dim.: 50/1.80 mm Frame height: 50 mm crossbar support: 40 mm Mesh size: 90 x 60 mm Weight: approx. 14,11 kg | pcs. Internal designation: GR-17 Remark: - The gratings may have damages, scratches, dents, welds. - The inserted shelf gratings are suitable in spite of the Ibjdpfxenh Rb Ns Aggja 40 mm crossbar support for a rack depth of upright depth of 1,200 mm. General information about the article: This item is offered for pickup only. A transport or shipment of this desired transport or shipment of this item is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), Note: The grating may show signs of damage, scratches, dents, or welded repairs. Scope of delivery includes: 01x inserted shelf grating, used Material colour: hot-dip galvanized Overall width: approx. 1,640 mm (cross bar direction) Overall depth: approx. 1,183 mm (bearing bar direction) Suitable for upright depth: 1,200 mm Clear support span: approx. 1,090 mm Beam support: approx. 50 mm Bearing bar dimensions: 30/1.8 mm Frame height: approx. 45 mm Mesh size: approx. 68 x 47 mm Weight | Piece: approx. 25.20 kg Internal designation: GR-45 Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Isdpfeqwzvcox Aggsba This item is offered for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 4x2, wheelbase: 3,880 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 42,000 mm, loading space width: 24,200 mm, loading space height: 6,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power mirror, seat heater, soot filter, trailer coupling, - Heated exterior mirrors - Heated mirrors - Passenger seat - Leaf spring suspension - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Air-suspended seats - Particle filter - Radio/Multimedia system - Rotating beacon - Rear-view camera - Sunroof - Seat heating - Sun visor - Lane keeping assist - Stability control - Windshield Internal number for customer inquiries: 4-025 MAN TGM 18.320 4x2 BB WITH PAVIC 3-SIDED DUMP BODY AND FASSI CRANE Vehicle: * MAN TGM 18.320 4X2 BB tipper truck * CC cab: the compact one (narrow, short, normal height) * Wheelbase 3,875 mm * Suspension: leaf/leaf (also leaf/air as an option) * Drive: 4x2 * Tires: front axle 2x 295/80R22.5, rear axle 4x 295/80R22.5 * Gross vehicle weight 18,000 kg * Automatic transmission: MAN TipMatic 12 12 OD * Diesel engine: MAN D0836 LFLAP, 235 kW (320 hp) output, 1,250 Nm torque, Euro 6d * Transmission functionality: EfficientRoll * Cruise control * Differential lock in rear axle * MEILLER axial pump 270/45 * Actuation for dump body in the cab * MAN EasyControl control panel, 4 functions, can be operated from the outside when the door is open * Trailer coupling: RINGFEDER Type 4040/G150B * Brake connection: 2-line at the end of the frame * Sun visor in front of the windshield * Central locking with remote control * MAN Media System Navigation Advanced 7 inch * Online traffic for navigation function * Smartphone integration * Heated and electrically adjustable rear-view and wide-angle mirrors * Driver comfort seat: air-suspended, with lumbar support, shoulder adjustment and heating * Height adjustment of safety belt, driver's seat * 2 work lights on the roof of the cab * 2 halogen rotating beacons on the roof of the cab * and more Body: * 3-sided dump body 4200x2420 mm, manufacturer: PAVIC * Front wall height 800 mm Ibjdpfx Aszh I Ivoggsa * Side wall height 600 mm * 8x lashing points fully retractable in the floor of the body (4 per side) * Material: Hardox 450 * Support for horizontal placement of the side wall with rubber support (long load transport) * Springs as a side wall lifting aid for easier opening and closing * 2x eyelets on the front wall (e.g. for attaching a vibratory plate or grapple) * Tipper with hot-dip galvanizing and side walls etc. painted completely with 2K truck paint in RAL9016 * Subframe galvanized and painted in RAL 9011 * Left and right sides in one piece, can be opened on both sides by pneumatics with air valve from the cab, opening on all sides from below (swinging), manually from top to bottom, center posts removable. * Springs as a side wall lifting aid for easier opening and closing * Body additional equipment: Prepared locations in the pillars for the retrofitting of a leaf grid at any time (side wall attachments PLUS 500mm for e.g. hedge trimming transport) Loading crane: FASSI F135AC.0.24 dynamic (4-section boom) Max. outreach 10.85m Slew range 390° Outrigger width 4.37m, hydraulic outriggers All hydraulic cylinders are double-acting Piston rods are hard-chromed Electronic overload cut-off device with FX500 emergency stop, as well as optical alarm (90% and 100%) FASSI stability control FSC-M/1 incl. LMB IID pressure relief and load holding valves...

Condition: used, This listing is for a Mast Uri Well. The unit is in full working condition and is ready for immediate release. The Mast Uri Well is a cutting-edge dispensing aid that features a 96 LED template, specifically designed for the streamlined transfer of urine samples in the diagnostic process for urinary tract infections (UTIs). Key Features: 96-Well Template: The innovative design allows for efficient sample transfer across 96 wells simultaneously, facilitating bacterial identification and antibiotic susceptibility testing (AST). Semi-Automated Solution: Integrates seamlessly into the Mast Uri System, combining manual and automated processes for optimal laboratory performance. Benefits: Increased Efficiency: Automating the sample transfer minimizes manual handling, decreasing the time spent on sample preparation and allowing lab technicians to focus on other critical tasks. Ibjdpjxxy S Ijfx Aggja Improved Accuracy: The precise placement provided by the 96-well template minimizes risks of contamination and mis-identification of samples, ensuring reliable results crucial for patient outcomes. Enhanced Throughput: The streamlined workflow enables laboratories to process a higher volume of samples in shorter turnaround times, essential for timely diagnosis and treatment of UTIs. Cost Savings: By reducing the need for manual handling and minimizing waste through efficient sample management, the Mast Uri Well contributes to overall cost reductions in laboratory operations.

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC MACHINING CENTER WITH EDGE BANDING UNIT AND ASSOCIATED POST-PROCESSING AGGREGATES. Technical Data: Working dimensions: + X-axis: 3,050 mm for single setup + X-axis: 900 mm for pendulum operation + Y-axis: Milling up to 1,220 mm with 25 mm tool diameter Edge banding up to 1,220 mm All aggregates up to 1,170 mm Workpiece thickness up to 60 mm with standard clamp 6 workpiece consoles for a tubeless vacuum system 4 workpiece stops in X-direction, integrated into the machine frame, for large workpieces 6 workpiece stops in the X-direction, one each integrated in the console 1 workpiece stop each on the left and right in the Y-direction 4 lifting rails for easy positioning of heavy workpieces Ibjdpfx Agjy Hrh Tsgja LED positioning aid for easy placement of vacuum cups and consoles Aggregate equipment: Milling spindle 11 kW, HSK F63 Speed range 0 - 18,000 rpm Liquid cooling C-axis for use with processing units, with torque support and 3-point stabilization 12-position tool changer magazine Drilling head with 17 vertical spindles Spindle pitch 32 mm Air nozzle for cleaning workpiece edges Exchangeable edge banding unit for 360-degree edgebanding work With single-roll magazine With granulate feed Edge thickness up to 3 mm Adapter aggregates: + Horizontal boring head in cross-head design + Lock case milling unit, 2 outlets + 90-degree sawing unit + Swiveling drilling/sawing unit + Combination unit for radius milling / scraper blade Control system: POWERCONTROL with: WOOD WOP AV license WOODWOP

Condition: ready for operation (used), Year of construction: 2021, load capacity: 10 kg, arm reach: 1,300 mm, number of axes: 6, This 6-axis DOOSAN M1013 collaborative robot was manufactured in 2021. It features a payload capacity of 10 kg and a reach of 1,300 mm, making it suitable for various applications. The machine includes a stable construction with an aluminum plate and a rotary table for enhanced functionality. If you are looking to get high-quality automation capabilities, consider the DOOSAN M1013 collaborative robot we have for sale. Contact us for further details. Ibsdpfx Aey D S S Teggsa • Total dimensions: 1,790 x 1,100 x 900 mm • Documentation: Complete documentation, risk assessment, and CE conformity declaration included Additional equipment • Machine table: Stable construction with 20 mm aluminum plate (840 x 700 mm) • Additional pallet: 400 x 700 mm support surface • Storage system: Rotary table with automatically rotatable hole-pattern plate (28 mm pitch) • Gripper: Pneumatic double-parallel gripper with quick-change jaws • Insertion aid: Spring-loaded compensating adapter (21 N) for raw part placement • Controller housing: EPS-Case IP54 for robot controller, pneumatic valves, and I/O modules • Construction: Open Item profiles with external T-slots for modular expansion • Electrical/pneumatic: 24-pin Harting plug set, pneumatic connection, ready to plug in • Included accessories: 100 cylinder pins (12 x 120 mm), 5 sets of gripper finger blanks, blow-out nozzle, hose guide, tablet holder, splash guard

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 2,150 mm, loading space volume: 38 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, Saddle Tipper Fine-grained steel welded construction, lightweight design, saddle plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, uncoupling not possible with load, in the uncoupled state, the vehicle must be tilted backwards. 2 chock blocks with holder Underrun protection, foldable Semi-shell fenders Integrated fender holder, surface resistant to stone chipping With anti-splash flaps, only on the last axle 1 tarpaulin rod with holder 2 towing hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid, actuated 3 times by the brakes Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front With lifting and lowering valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5, manufacturer at the discretion of the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the sides Ibjdpfsi Riz Rsx Aggoa 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard chrome-plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant steel, front wall 5 mm thick, with external stiffeners made of 30 mm hollow profile, cleanly welded, with an upper profile that prevents spillage. Inside with ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a hinged flap with double-joint hinge, externally supported with 2-fold hook locking. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connection plate for air/electrical and brake with large clearance for best possible operation. Roller cover, one-sided for placement on the right side, with central locking on the left side Painting Frame DB 7350 Novagrau 10 years Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements.

Condition: used, Year of construction: 2016, Used Filling Monoblock MITSUBISHI up to 39000 BPH It is extremely important to note that this machine is complementary to it’s rinsing machine: (click here). The Filling Monoblock Mitsubishi offers an advanced solution in the bottling sector. Specifically designed to handle a wide range of liquids, it boasts a capacity of up to 39,000 BPH. Ibjdpfx Asvgvlksggoa Technical Specifications of Model FHRJ80M Mitsubishi Heavy Industries Mechatronics Systems Ltd manufactured the FHRJ80M model in 2016 to meet the growing demands for speed and precision in bottling. Equipped with 80 valves, this weight-based filling system accurately doses products, significantly minimizing waste. Moreover, the system fills aluminum bottles in various sizes ranging from 0.29L to 0.41L. Thus, it showcases its versatility for handling different types of liquids such as coffee (last product that has been filled by this monoblock), liquid soap, oil, and spirits. Bottling and Capping Features Furthermore, the Mitsubishi FHRJ80M monoblock integrates a capping function with 24 heads, accommodating aluminum screw caps of 28 mm and 38 mm. Its clockwise rotation direction eases integration into existing production lines. Additionally, the precision in cap placement and swift execution ensure the process’s efficiency, which is crucial for preserving product integrity and container safety during transport and storage. Storage and Maintenance Currently stored in a warehouse, the Filling Monoblock Mitsubishi remains in excellent condition to ensure its functionality and readiness. Also, the availability of instruction manuals aids in maintenance and repair operations, which are essential for extending the machine’s lifespan and maintaining optimal performance. Integrated safety features protect operators and the machinery, thereby reducing accident risks during operation. Conclusions of the Filling Monoblock Mitsubishi Finally, the used Mitsubishi FHRJ80M filling monoblock serves as an optimal solution for those seeking efficiency and reliability in the bottling industry. Its adaptability to various formats and product types, along with the precision of its filling and capping system, make it ideal for a broad range of industrial applications. With proper maintenance and careful management, this monoblock can deliver high performance, significantly enhancing production process optimization. This model not only meets but also exceeds industry expectations in terms of functionality and performance.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 44 kW (59.82 HP), pressing force: 500 t, stroke length: 300 mm, operating speed: 9 mm/s, throat depth: 400 mm, clearance between the columns: 5,050 mm, total length: 7,500 mm, total width: 4,200 mm, total height: 5,900 mm, overall weight: 67,000 kg, T1 and T1 bending aid for supporting arm EASY FORM angle measuring and correction system Oil tank, 650 liters Set of universal LVD tooling Lightly used under power in Germany New price: EUR 650,000 Max. bending length: 6100 mm Distance between columns: 5050 mm Max. pressing force: 500 tons Distance beam to table: 570 mm Ibedpfszuyyqjx Aggja Beam stroke: 300 mm Table width: 200 mm Throat depth: 400 mm Approach speed: 100 mm/min Working speed: 9 mm/min Return speed: 80 mm/min Adjustment of X-axis back gauge: 1000 mm Number of controlled axes: 9 Control: TOUCH Crowning: Yes Hydraulic tool clamping: Yes Power: 44 kW Length: 7500 mm Width: 4200 mm Height: 5900 mm Weight: 67,000 kg

Condition: good (used), mileage: 328,352 km, power: 118 kW (160.44 HP), first registration: 11/2019, fuel type: diesel, tire size: 225/75R16, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 2, total length: 6,500 mm, total width: 2,100 mm, total height: 2,500 mm, loading space length: 3,920 mm, loading space width: 1,800 mm, loading space height: 1,960 mm, Year of construction: 2019, Equipment: ABS, central locking, electric window regulation, power mirror, traction control, = Further options and equipment = - Heated mirrors - Tachograph (control device) - Halogen lamp - None - Manual - Fabric - Partition wall = Remarks = Configuration: 4x2, Curb weight: 2,185 kg, Gross weight: 3,500 kg, Cabin type: single cab, Tachograph (control device), Number of airbags: 1, Parking aid: none, Electric windows, Electric mirrors, Partition wall, Color: white, Heated mirrors, Lighting type: halogen lamp, Engine power: 118 kW (158 HP), Fuel: diesel, Euro: 6, Drive mechanism: timing belt, Transmission type: manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Side walls paneled, Rear step, Roof rack: none, Side doors: 1, Rear closure: double doors, Central locking, Number of seats: 2, Seat configuration: 1+1, Upholstery: fabric, Seat adjustment: manual, Engine hood, Tire type: winter tires = Further information = General information Number of doors: 1 Registration number: KLEYN1 Ijdpfx Agey I Sf Ijgoba Axle configuration Tire size: 225/75R16 Brakes: disc brakes Axle 1: Tire tread left: 7 mm; Tire tread right: 7 mm; Suspension: coil spring Axle 2: Tire tread left: 7 mm; Tire tread right: 7 mm; Suspension: leaf spring Weights Unladen weight: 2,185 kg Payload: 1,315 kg Gross vehicle weight: 3,500 kg Functional Loading platform height: 65 cm Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1

Condition: used, mileage: 374,422 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,330 mm, first registration: 10/2018, loading space length: 4,750 mm, loading space width: 2,060 mm, emission class: euro6, color: silver, driver cabin: day cab, suspension: other, tire size: 195/75R16, number of seats: 3, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, traction control, trailer coupling, = Additional options and equipment = - Bluetooth - Electric windows - Electric mirrors - Tachograph (control device) - Halogen lamp - None - Manual - Radio/Cassette - Fabric upholstery - Winch = Notes = Ibodpfx Agey Hqfwsgoa Configuration: 4x2, twin rear wheels, payload: 1,010 kg, unladen weight: 2,490 kg, gross weight: 3,500 kg, trailer load (unbraked): 750 kg, centre axle trailer load (braked): 3,500 kg, tow bar, winch, cab type: single cab, cruise control, tachograph (control device), air conditioning, number of airbags: 1, parking aid: none, electric windows, electric mirrors, radio/cassette, GPS navigation, colour: silver, metallic, lighting type: halogen lamp, air conditioning, Bluetooth, hazard warning lights, engine power: 120 kW (161 Hp), fuel: diesel, Euro 6, drive technology: timing chain, transmission: manual gearbox, gears: 6, power steering, ABS, ASR, starter battery, roof rack: none, central locking, seats: 3, seating configuration: 1+2, seat cover: fabric, seat adjustment: manual, recovery vehicle, TIJHOF, very complete, from LIER, ECC, navi, etc., tire type: summer tires = Further information = Transmission Gearbox: 6-speed manual transmission Axle configuration Tire size: 195/75R16 Brakes: disc brakes Axle 1: left tire tread: 6 mm; right tire tread: 6 mm; suspension: coil spring Axle 2: twin tires; left inner tire tread: 2 mm; left outer tire tread: 2 mm; right inner tire tread: 2 mm; right outer tire tread: 1 mm; suspension: air suspension Dimensions Dimensions (L x W x H): 790 x 210 x 237 cm Weights Unladen weight: 2,490 kg Payload: 1,010 kg Gross vehicle weight: 3,500 kg Functional Loading platform height: 65 cm Maintenance APK (periodic technical inspection): valid until 01.2027 Condition General condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 1 Identification Registration number: V-175-SK

Condition: used, mileage: 99,900 km, power: 88 kW (119.65 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,300 mm, Equipment: air conditioning, central locking, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention!!! Sales preferably to commercial customers. Internal ID number: [ 3408 ] ----Optional extras: * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV (technical inspection) & emissions test * Nationwide delivery * Financing possible even without a down payment * Spring offer: Upon request and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * German vehicle * Immediately ready for use * First owner * Euro 6 standard * Accident-free * Long wheelbase (L2) * LED daytime running lights * Loading area with wooden lining * Trailer coupling 2,500 kg * Air conditioning * Reversing camera * Reinforced springs * Bluetooth multimedia system * 3 seats Special equipment: Rear parking aid, rear wing doors without glazing (opening angle 250 degrees), wooden floor in the loading area, complete wheel covers, headlights Full-LED with LED signature C Other equipment: Airbag driver side, anti-slip regulation (ASR), exterior mirror electrically adjustable and heated, battery 85 Ah, on-board computer, rev counter, automatic switch-on for headlights, omission of keyless entry, glove compartment with cooling function, interior filter: pollen filter, body/structure: standard van, fuel tank: 80 liters, loading area partition, steering column (steering wheel) adjustable, model update, engine 2.0 liters - 88 kW dCi Diesel Energy, fog light, radio preparation, wheelbase 3498 mm, tire repair kit, low emissions according to emission standard Euro 6d-TEMP, sliding door loading/passenger compartment right, seat cover / upholstery: fabric, seats in the driver's cab: double passenger seat, seats in the driver's cab: driver's seat comfort 3-way adjustable, start/stop system engine, daytime running lights LED, lashing eyes in the loading area on the side, pre-wiring for electrical installation, heat-insulating glazing ----Do you want to lease or finance? We offer attractive deals – even without a down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. ----Note: All information on the Internet is non-binding and serves only as a general vehicle description. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Ibjdoy D Dk Uepfx Aggea We prefer to sell vehicles with a mileage of more than 50,000 km or older than 3 years to our commercial customers.

Condition: new, Year of construction: 2023, functionality: fully functional, QATM Qcut 500 A Precision Cut-Off Machine Manufacturer: QATM / ATM Qness GmbH Type: Qcut 500 A Year of Manufacture: 03/2023 Machine Type: Automatic Metallographic Cut-Off Machine Condition: New / unused Cutting Disc Diameter: up to 508 mm (20") Drive Power: 15 kW S1 For sale is a new and unused QATM Qcut 500 A precision cut-off machine, manufactured in 2023, with extensive equipment, a belt filter system, and an extraction system. The machine is particularly suitable for the precise cutting and sectioning of samples in metallography, material and component testing, quality assurance, research and development, as well as for industrial laboratory and testing applications. The machine is additionally equipped with the option "Laser alignment aid for easy positioning of the workpiece." Technical Data: Manufacturer: QATM / ATM Qness GmbH Type: Qcut 500 A Year of Manufacture: 03/2023 Country of Manufacture: Germany Power Supply: 400 V / 50 Hz Connected Load: 30.0 kVA Fuse Rating: 32 A Drive Power: 15 kW S1 Cutting Disc Diameter: up to 508 mm (20") Speed at Ø 508 mm: 1000 – 2400 rpm Cutting Disc Arbor: Ø 32 / 40 mm Max. Sample Size at Ø 508 mm: 190 mm Max. Sample Weight: approx. 400 kg incl. clamping device Travel X-axis: 420 mm Travel Y-axis: 280 mm Iodszt N Rvjpfx Aggsba Travel Z-axis: 200 mm Positioning Accuracy Z-axis: 0.1 mm Working Speed X-/Y-axis: 0.001 – 50 mm/s Rapid Traverse X-/Y-/Z-axis: 80.0 mm/s Compressed Air Connection: 6 bar (± 2 bar) Noise Emission: max. 62 dB(A) at idle Operating Hours according to Display: 5 h 47 min Software Version: V 4.30 Belt Filter System: Manufacturer: QATM / ATM Qness GmbH Type: Belt Filter Automatic 285 Year of Manufacture: 03/2023 Belt Filter Type: UR 1030 Belt Filter Year of Manufacture: 2022 Rated Voltage: 3 × 400 V / N / PE, 50 / 60 Hz Rated Current: 100 mA Rated Power: 83 VA Dimensions: Machine Dimensions: approx. 1300 × 1820 × 1250 mm (W × H × D) Table Size without Z-axis: 700 × 500 mm Table Size with Z-axis: 550 × 500 mm Table Plate: Stainless Steel T-Slot Width: 12 mm Machine Weight: approx. 1000 kg Equipment: Option: Laser alignment aid for easy positioning of the workpiece Touchscreen control panel X, Y, and Z-axis control Joystick operation Stainless steel work table with T-slots Enclosed work area with viewing window Coolant nozzles QATM Belt Filter Automatic 285 Belt Filter UR 1030 Filter mist extraction system Coolant / filter unit Tools and clamping accessories according to images Piping and connection accessories according to images Operating manuals and documentation according to images Further accessories according to images Transport Data: Machine Weight: approx. 1000 kg Shipping by freight forwarder possible. Condition: New / unused. Year of Manufacture 2023. The machine has not been used in production. Operating hours according to display: only 5 h 47 min. Very well-maintained optical condition according to images. Display and control are shown as functional. Nameplates are present. Scope of Delivery: 1 × QATM Qcut 500 A Cut-Off Machine 1 × QATM Belt Filter Automatic 285 / Belt Filter Unit Filter mist extraction system Laser alignment aid Tools and clamping accessories according to images Piping and connection accessories according to images Operating manuals and documentation according to images Further accessories according to images. Scope of delivery as shown or described. Subject to changes, errors and prior sale.

Condition: used, This listing is for the Grant Bio PMS1000 Microplate Shaker The unit is in full working condition and is ready for immediate use Overview of the Grant bio PMS‑1000i Microplate Shaker Isdpfxoxhfnto Aggeba Applications Ideal for mixing, incubation, and cultivation of biological or chemical samples in disciplines like microbiology, immunology, molecular biology, and biotechnology. Common uses include immunoassays, high-throughput screening, colorimetric testing, and binding assays involving magnetic beads. Improves reproducibility by ensuring proper resuspension of PCR products, aiding in consistent optical density readings and better plasmid DNA yields. Key Features Shaking mechanism: Driven by a brushless, direct-drive motor, providing smooth and reliable motion. Speed range: Adjustable from 150 rpm to 1200 rpm, suitable for both gentle mixing and vigorous agitation. Plate capacity: Supplied with a platform for 2 microplates (standard-depth 96-well or 384-well), with an optional accessory (MPP‑4) for supporting 4 plates. Controls and display: Features a simple dial for speed adjustment, a 4-digit LED display indicating rpm and remaining time, plus a built-in electronic timer (1 min to 24 hours) with automatic shut-off. Secure plate fitting: Uses screw fittings to firmly hold plates in place, minimizing slippage during shaking. Technical Specifications Orbit diameter: 2 mm Dimensions: 90 mm (H) × 205 mm (D) × 220 mm (W) Operating temperature: 4 °C to 40 °C Power and consumption: External power supply (AC 120–230 V to DC 12 V), approximately 3.4 W (0.28 A)

Condition: used, Year of construction: 2019, Corpus press Manufacturer: LINYI JIANZHONG WOOD MACHINERY Type: JJZ-CP Year of manufacture: 2019 The JJZ-CP press is suitable for the production of plywood, doors, and MDF panel joints. The feeding and removal of the glued elements are carried out automatically via powered roller conveyors. Technical data - Max. pressure 500 t (adjustable) - Max. filling height 1300 mm - Min. filling height 900 mm - Max. filling size 1300 x 2500 mm - Press dimensions 3600 x 1370 x 4500 mm - Press placement approx. 500 mm below floor level - Feeding table 2000 x 1960 mm - Receiving table 2350 x 2500 mm - Max. power 13.2 kW - Weight 12000 kg - CE marking - Capacity: 6 batches per hour 2 corpus presses are available for sale. Ibodpszuzwksfx Aggja Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Factory-reconditioned edge processing line for 3 mm edges Manufacturer: IMA Type: Combima Consisting of: Machine 1: Used edge processing machine from IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 1,500 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Milling unit with 1 motor, 4.4 kW, 100 Hz - Hot melt adhesive unit with 2-roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 2 motors, 1.5 kW - Chamfering unit with 2 motors, 0.6 kW - Profile drawing blade unit - Straight drawing blade unit - Edge sanding/buffing unit - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB - 1 used rotating device for changing from longitudinal to transverse - Factory-reconditioned with a 12-month warranty - Max. panel length 2,500 mm, max. panel width 1,500 mm Ibjdpfx Aszuyqvoggsa Machine 2: Used edge processing machine, manufacturer: IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 3,000 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Protective milling unit with motor 3.3 kW, 100 Hz - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Enclosed gluing unit with double roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 1 upper and 1 lower motor, 0.4 kW - Chamfering unit with 2 motors, 0.4 kW - Copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear lower workpiece profiles, copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear upper workpiece profiles, profile drawing blade unit - Straight drawing blade - Buffing unit - Center support - Pull-out rollers 800 mm - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB Delivery time after order placement approx. 4-6 months (depending on current workload and scope of desired work). Individual machine configurations are possible according to customer requirements, as the machines are disassembled down to the base frames and reassembled after replacing all wear parts.

Condition: used, mileage: 225,553 km, power: 375 kW (509.86 HP), first registration: 06/2014, fuel type: diesel, fuel: diesel, driver cabin: sleeper cab, Year of construction: 2014, Equipment: air conditioning, parking heater, Cab: High sleeper cab GVW: 120.000 kg = Additional options and accessories = Ibedpfx Ajzuy Hqsggoa - Heater - Sleeper cab - Vehicle heater = Remarks = = Additional options and accessories = - Driver seat air-cushioned = More information = Steering wheel placement: Left Production country: DE Please contact Theo Lelie , , ) for more information

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Iodpfx Agozux Tpogeba Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: used, Year of construction: 2021, CNC machining center with a fixed worktable, double-sided driven gantry, and a 5-axis milling spindle with continuous interpolation. Machine for processing solid wood, wood-based materials, and various plastics. Base machine and gantry Machine base and gantry made of a ribbed, welded steel construction, offering very high rigidity. Guidance system and drives Gantry movement of the X and Y axes with rack and pinion and servo drive. DUAL GANTRY MOTORIZATION: Drive of the X-axis with two synchronized servo drive motors. Movement of the Z-axis via ball screw with servo drive. Dust-protected linear guide. Safety system Three-part safety floor mats allow for the placement of workpieces in the non-active area. Moving partial enclosure with a Lexan protective window for the machining units. Central lubrication Automatic central lubrication Vacuum system Vacuum system for pendulum machining with constant suction power in both work areas. Machine operation The machine is equipped with a cable-guided remote control for performing basic functions. Electrical equipment Dust-protected control cabinet (CE) according to IP 55 standard, including an air conditioning unit and a mobile control panel. Machine control OSAI Open Numerical Control 5-axis swivel head Z 700 Movement of the C-axis and B-axis via brushless servo drives - Maximum rotational speed: 750 /2 sec. - Rotation C-axis: Swivel axis: +/- 110 Technical data - max. travel speed X-axis: 60 m/min - max. travel speed Y-axis: 60 m/min - max. travel speed Z-axis: 24 m/min - Vector speed: 80 m/min - max. workpiece height: 500 mm - Machining area: 4210 x 1605 mm (Extended working area) - Compressed air supply: 7 bar - Suction power: min. 2200 m3/h - Suction speed: min. 28 m/s - Suction nozzle: 160 mm Work table Comec Designed Phenolic resin table, designed as a grid table, grid dimension 50 x 50 mm, for accommodating Cosmec suction systems and templates. The work table is divided into two work areas. Threaded holes in the table to mechanically fix workpieces, 3 pcs. retractable stops Ibsdpfozux H Aex Aggea Vacuum pump Vacuum pump 250/300 m3/h (50/60 Hz), power: 5.5 kW Main spindle 5-axis spindle: 18 kW main spindle, liquid cooling, tool interface HSK 63 F - 15 kW in S1 operation - 18 kW in S6 operation - Ceramic bearings - Direction of rotation: left/right - Spindle speed: 500 - 24000 rpm Extraction hood Extraction hood controlled via NC program, adjustable in height. 2 x Tool changer Moving 12-position tool changer for tool interface HSK 63 F - max. tool diameter 150 mm, if adjacent position is free - max. tool diameter 120 mm, if adjacent position is occupied - max. tool weight: 6 kg - max. weight of tool and holder: 40 kg Tool length measurement Station for automatic length measurement of the tool Note: Current status of the 5-axis simultaneous machining software through a maintenance contract.

Condition: excellent (used), Year of construction: 2023, Specification: Workpiece Length X: 3100mm Workpiece Width Y: 1250mm (1405mm to back stop) Workpiece Thickness: 260mm including pod 12Kw 5 axis spindle 12 Vertical Drilling Spindles 4 Horizontal Drilling Spindles in the X Direction 2 Horizontal Drilling Spindles in the Y Direction Grooving Saw, can be swivelled 0-90 LED Pod and Rail positioning Aid 10 Position Fixed Lateral Tool Changer 14 Position Rotating Tool Changer Comfort Package Tool Length Check 2 Vacuum Pumps Supply unit for Pneumatic Clamping Elements Energy Saving Function Powercontrol with powerTouch WoodWop for machine Isdpfxjzgtxqe Aggeba 3D Simulator for Machine 3 Phase 400V 50Hz CE

Year of construction: 2020, operating hours: 100 h, condition: excellent (used), functionality: fully functional, overall weight: 300 kg, total length: 1,330 mm, total width: 840 mm, total height: 1,870 mm, compressed air connection: 6 bar, type of input current: AC, Tray-Loader TL-6040 - 2-lane stack-on module for the economical transport of trays (boxes) for printed circuit boards. The empty trays are removed from the transport carriage, automatically positioned and made available for assembly. After placement, the trays are automatically destacked on a 2nd transport trolley. - Compact design - Small floor space - Stacking module - Transport trolley - Standard tray size: 400 x 600 mm - Sturdy welded steel frame - W x D x H: 840 x 1,330 x 1,870 mm - Manual operating height: 930 - 1,050 mm - Compressed air 0.6 mPa (6bar), oil-free, filtered, dry - Average consumption approx. 10l/min - Ambient temperature +18°C - + 30°C Ibedoxuqtbjpfx Aggoa - Weight approx. 300 kg

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace Ibjdpfx Agjxrgl Ijgea - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: excellent (used), Year of construction: 2017, operating hours: 100 h, functionality: fully functional, overall weight: 300 kg, Tray-Loader TL-6040 - 2-lane stack-on module for the economical transport of trays (boxes) for printed circuit boards. The empty trays are removed from the transport carriage, automatically positioned and made available for assembly. After placement, the trays are automatically destacked on a 2nd transport trolley. - Compact design - Small floor space - Stacking module - Transport trolley - Standard tray size: 400 x 600 mm - Sturdy welded steel frame Isdpjunh I Nsfx Aggeba - W x D x H: 840 x 1,330 x 1,870 mm - Manual operating height: 930 - 1,050 mm - Compressed air 0.6 mPa (6bar), oil-free, filtered, dry - Average consumption approx. 10l/min - Ambient temperature +18°C - + 30°C - Weight approx. 300 kg

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, noise level: 59 dB, warranty duration: 12 months, volume flow: 420 m³/h, Equipment: chassis, type plate available, Fume extraction with remote control and suction hose Air inlet interface ρm flange Iedjxt Dq Rjpfx Aggjba Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system