Used Polzer Frame Press Polzer Ht 30/21 for sale (46,912)

Condition: excellent (used), working length 3300 mm working height 1800 mm 3 vertical cylinders 2 horizontal cylinders Nsdpfx Agoy Uuwaj Tjwh manual operating mode

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Nwedpfjk S Htxox Ag Toh Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Nwedpfow Tukiex Ag Tsh Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Machine included: - Fence Nwsdpeuqdwxefx Ag Tsh HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: used, Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Nwsdpfewyplcex Ag Tsh Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Condition: used, Year of construction: 1971, machine/vehicle number: 7130, Capacity: 60 ton Throat depth: 275 mm Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Nwsdpfx Aouqcxnsg Toh Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton

Condition: used, Year of construction: 1970, Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Slide adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Nwedpouqc Ensfx Ag Tjh Weight of machine approx.: 2,67 ton Standard configuration the electric is new from 2015.

Condition: used, Year of construction: 1983, machine/vehicle number: 5154, Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Nedpfsuqc Hfex Ag Tewh Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton Standard configuration Extended machine accessories Press body can be tilt

Condition: good (used), Frame press, gluing press Nedpfxeb A H Dhs Ag Towh -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg

Condition: new, New electro-hydraulic garage press. Model: HP-30. Capacity: 30 tons. Pressure: 25 MPa. Cylinder stroke: 260 mm. Distance between columns: 495 mm. Vertical table travel: 270 mm. Table dimensions (W x D): 300 x 460 mm. Machine dimensions (W x D x H): 1000 x 400 x 1400 mm. Connection voltage: 3 x 400 Volt. Motor power: 3 kW. Machine weight: 420 kg. Special price for in-stock machine: available upon request, via email only. Delivery conditions: Delivery time: in stock, subject to availability. Delivery: ex works, Baarle-Nassau. Payment: before collection. Prices: net, excluding VAT. Machinehandel De Leeuw BV cannot be held liable for any discrepancies between the technical specifications in this offer and the actual machine. Machinehandel De Leeuw BV specializes in used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Visiting address: Oordeelsestraat 7 b, NL-5111 PA Mailing address: Postbus 294, NL-5110 AG Baarle-Nassau / The Netherlands Tel: GSM: Email: info@ Njdsgbd H Tepfx Ag Tswh Web:

Condition: used, Die-cutting machine – Swivel frame die-cutting machine – Flatbed die-cutting machine – Toggle press – Eccentric press Die-cutting machine + feeder for use with strip-type die-cutting tools Flatbed die-cutting machine HELMERDING, type PSH 25 Item no. EP 97784, Machine no. 6073, Year of manufacture 1998 Pressing force 25 tons Distance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame, width 510 x depth 440 mm, plate thickness 20 mm Punch area 800 x 670 mm Through-hole in the table 490 x 420 mm Punch stroke 45 mm Punch adjustment distance 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min Motor power 15 kW Mains connection 400 volts, 50 Hz - controlled drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - punch equalizing cylinder - automatic central lubrication system VOGEL - massive base plate with 4 vibration damping elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for die-cutting cardboard sheets. Ideal for die-cutting non-woven fabrics or similar materials for respiratory masks. Nedpsdzqmzjfx Ag Tewh

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Nwodoh U Dtuopfx Ag Tjh Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Nwjdpsh Uhqyofx Ag Tjh Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: used, Single-column hydraulic press, HYDRAP, type HPSK 25 Serial No. 6312, Year of manufacture 1989 Clamping force: 25 tons Ram stroke: 500 mm Reach: 300 mm Installation height: 700 mm Table surface: 1000 x 500 mm Table bore: Ø 210 mm Ram surface: 400 x 360 mm Dowel pin bore: Ø 40 mm Nedpfx Ajhrakvsg Tewh Table height above floor: 855 mm Rapid traverse speed: 280 mm/sec Press speed: 3.5 mm/sec to 25 mm/sec Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Power supply: 400 volts, 50 Hz - Operation and programming via SIEMENS S5 with OP1 control unit - Measuring system for stroke adjustment - Press speed adjustable in infinitely variable steps via potentiometer - Pressure setting adjustable in infinitely variable steps manually via pressure regulator - Short-stroke device - Mechanical tool clamping on the ram with T-slots and dowel pin bore - Control cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control unit designed for electrical tool monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H: 1800 x 1200 x 2930 mm Weight: approx. 4 tons Good condition

Condition: excellent (used), For sale: Hofer press in good working condition. Nwedpfx Agox Rrw Nj Tsh

Condition: excellent (used), Year of construction: 2007, Window fitting press Nwedst T Srpepfx Ag Teh

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Nwedpfx Agoyr Ek Rj Tsh Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 250 kN (approx. 25.5 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 10 mm/s Return speed: 14 mm/s Motor power: 3 kW

Condition: good (used), ZIM Hülsta cabinet press NOW Easy Make: ZIM Hülsta-Werke Type: NOW Easy Ser. no.: 380125028 Carcase max. 260 x 1100 mm 2 supports at the bottom, movable 2 press bars at top, movable Beckoff control panel Roller conveyor 4500 x 600 mm Roller width: 500 mm Nodpevdbv Asfx Ag Towh Overall dimensions: W x D x H 3300 x 1800 x 3600 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, Working width 3500 mm Nodpfx Agod Rzc Ro Towh Working height 2300 mm Number of cylinders 4 St.

Condition: ready for operation (used), Year of construction: 1993, machine/vehicle number: 9306005, functionality: fully functional, Motorquickomat Z Automatic width and height adjustments Wood scanning Controlled pressing time Nwsdewa Sxxopfx Ag Toh

Condition: new, Year of construction: 2026, machine/vehicle number: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, functionality: fully functional, input voltage: 400 V, pressing force: 51 t, stroke length: 200 mm, table width: 400 mm, table length: 500 mm, pressing speed: 18 mm/s, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 500 kN (approx. 51 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 19 mm/s Return speed: 18 mm/s Motor power: 4 kW Nwodoyr D R Nepfx Ag Teh Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the machining of larger components and convenient handling of materials from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and better access to the working area. Solid steel frame – ensures durability and operational safety. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – suitable for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 1000 kN (approx. 102 tons) Maximum pressure: 25 MPa Maximum opening: 600 mm Stroke: 300 mm Table dimensions: 700 × 500 mm Throat depth: 250 mm Downward speed: 11 mm/s Return speed: 25 mm/s Motor power: 5.5 kW Nsdpeyrr Rksfx Ag Tewh Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: excellent (used), 2 support legs for Esterer gate type EHD 30. Used for only 6 years. Njdeip Uf Uepfx Ag Tjwh Support legs and spare parts are also available for other Esterer gate types.

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Nwodpfjyxgr Rex Ag Tjh

Condition: used, NICO DUIN frame press Nsdpjytc Snefx Ag Towh