Used Precision Cycle Lathe for sale (13,887)

Condition: used, Year of construction: 2015, bed width 350 mm turning length 1.000 mm control Manual plus 620 Heidenhain greates pass round over bed 430 mm Swing dia. over traverse guideway 220 mm turning speed range - main spindle 1 - 3.600 min/-1 power capacity - main spindel 9 / 11 kW max. Torque ca. 200 Nm spindle head DIN 55027 / 6 spindle diameter in front bearing 110 mm spindle bore 80 mm usable bar diameter max. 80 mm System MultiFix Shank diameter 20 x 20 mm x-axis 230 mm z-axis ca. 1.000 mm diameter of quill 70 mm quill stroke 150 mm taper of center MK 5 hollow fix: 12 -150 mm hollow var: 12 -125 mm rapid traverse X: 10 / Z: 7 m/min feed power X: 4 / Z: 5 kN weight of the machine ca. 3,2 t dimensions of the machine ca. 2,8 x 2,1 x 1,9 m Lathe cycle controled SEIGER - SLZ 420 E / 1000 - WITHOUT three-jaw chuck Iodpfxeyvkr As Apneat - Impulse lubrication Flow rate: 0.1 l/min, Pump pressure: 30 bar, Tank capacity: 2 dm³

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Year: 2017 Some repairs have been carried out, and the following defects are known to us: Iaedpow I S Uusfx Apnst Geometry checked. Z-guides in the area of the main spindle (chuck) are 'slightly' worn. Tool turret checked and adjusted. X-axis belt renewed and machine zero point set. Z-guides in the area of the chuck are slightly worn. Automatic band lubrication oil leak – troubleshooting completed, problem resolved, lubrication oil line renewed. 100% operational. Loaded free of charge. Immediately available. Location: 8740 Zeltweg, Austria

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: K0118120267, spindle bore: 86 mm, turning length: 1,000 mm, turning diameter over bed slide: 440 mm, quill stroke: 160 mm, quill diameter: 75 mm, center height: 220 mm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 6 m/min, spindle speed (max.): 2,000 rpm, feed rate X-axis: 6 m/min, feed rate Z-axis: 8 m/min, bed width: 330 mm, total length: 27,000 mm, total width: 19,000 mm, total height: 22,200 mm, workpiece weight (max.): 261 kg, overall weight: 1,800 kg, rotational speed (max.): 2,000 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 920 mm, power: 0.009 kW (0.01 HP), Equipment: rotational speed infinitely variable, in the following version: - CNC control SIEMENS 828D BASIC T - STORE TURN SOFTWARE - Spindle holder: DIN 55029 / KK 8 - Morse taper of the main spindle: MK 5 - Morse taper in the quill: MK 5 - Steel holder head B - Torsion steel holder BD 25140 (3 pcs.) - Turning steel holder BH 32130 (1 pc.) - Schunk 3-jaw lathe chuck Ø 250 mm Type ROTA-G 250-82 D8, DIN 55029, Iedpfxjra Ehrj Apnsat Bore Ø 82 mm, steel body, incl. hard base jaws, art. no. 815026 - Incl. accessory package (see photo), without turning tools! - Full cladding - Chip tray can be pulled out to the front - Automatic central lubrication of the slideways - Ball screw in X- and Z-axis - Movable panel with electric handwheels for X- and Z-axis - 3-color status light - Work area lighting - Coolant device - Reducing sleeve for main spindle - Set of operating tools - Technical documentation - CE version

Condition: good (used), height of centers: 220 mm Iaedpfx Apjd Scafsnjt center distance: 1000 mm max. circulation-Ø over bed: 440 mm spindle boring: 52 mm spindle retainer: Gr. 6 mm retainer taper tailstock: 4 MK spindle speed: 37,5 - 3000 Upm forwarding feed: 7500 mm/U thread pitch: electrical connection: 400 V kW space needed: 2800 x 1480 x 1570 mm weight: 2150 kg

Year of construction: 1995, condition: used, machine/vehicle number: 30-S/70, circulation-Ø: ueber Bett 625 mm Iodpfx Ao Nzhdjpneat max. center distance: 1500 mm spindle boring: 105 mm spindle speed: 6,6 - 2000 rpm space needed: 4400 x 2050 x 1820 mm weight: 5200 kg

Condition: new, schinfa Machinerevisie has been the specialist in revision for over 27 years. We do all this in-house. We can grind up to 2700 mm. We bring the machines far back within the DIN standard. Iedofhnr Iopfx Apnjat We can overhaul a machine from you or deliver a machine from us.

Condition: used, Year of construction: 1998, turning diameter 555 mm turning length 4000 mm control Monforts Control System type MTC-K CCUO turning diameter over slide rest 290 mm cross movement . mm Iodpfxsyqv N Uo Apneat spindle passage . mm turning speeds 1600 U/min transmission ratio . quill stroke . mm rapid traverse . m/min main drive motor . kW 3-jaw chuck Rotha-S Plus 3-jaw-chuck diameter . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m Serial number: 262/01 Machine number: Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, turning diameter over cross slide: 480 mm, spindle bore: 103 mm, turning length: 2,000 mm, turning diameter: 520 mm, turning diameter over bed slide: 520 mm, three-jaw chuck diameter: 400 mm, spindle diameter: 110 mm, workpiece length between centers: 2,000 mm, CNC: Siemens Sinumerik 840 D Swing over bed: 520 mm Permissible swing over carriage: 480 mm 12-position turret Speed range: 7-2800 rpm Distance spindle nose to faceplate: 2171 mm Maximum turning diameter: 520 mm Maximum turning length: 2000 mm X axis: 405 mm Iaedoyxv D Njpfx Apnst Z axis: 2049 mm Spindle speed: 7-3000 rpm Spindle bore: 103 mm Spindle nose: A11 No tailstock.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: BL278700, spindle bore: 40 mm, spindle nose: Camlock D1-4, spindle speed (max.): 55 rpm, spindle speed (min.): 3,000 rpm, empty load weight: 1,250 kg, For sale is a Schaublin 150 in very good refurbished condition. Fully operational. The spindle was overhauled in 2021, with the spindle bearing set ordered directly from Schaublin. The guideways have been scraped and adjusted. The machine turns very accurately, with cylindrical deviation of only 1-2 thousandths over 200 mm. The machine can be inspected under power in 5023 Salzburg. Ijdpfxsy Iu Nve Apnsat

Condition: good (used), functionality: fully functional, Technical data: Centre height 110 mm Centre width 160 mm Spindle bore 23 mm Motor power 1.7 kW Speed can be set via potentiometer from approx. 100 - 2,300 rpm 3 pre-selected speeds or 3 switching levels . Iasdpfoy Egmhox Apnot Scope of delivery, machine with: Operating modes: Manual + automatic Pneumatic clamping device Tilt tailstock with 2 sleeves for K 12 collets, with control switch for switching Hand lever cross support with 4 stops, consisting of cross and longitudinal support .

Condition: excellent (used), Year of construction: 2009, Heidenhain digital display Working area Centre height: 310 mm Centre distance: 1625 mm Max. turning diameter in the gap: 880 mm Max. turning diameter over bed: 620 mm Iaedsyyv N Uepfx Apnst Turning diameter in front of the longitudinal carriage: 580 mm Turning diameter over cross slide: 425 mm Bed width: 350 mm Length of the gap in front of the faceplate: 200 mm Main spindle bore: 80 mm Spindle mounting: DIN 55027/8 Optional Camlock spindle mounting: DIN 55029/8 12 spindle speeds: 30 – 1500 rpm Cross slide travel: 365 mm Top slide travel: 165 mm Drive power: 5.5 kW Coolant pump motor power: 0.06 kW Weight: 1805 kg

Condition: good (used), Year of construction: 1998, Circulation/rotation Ø over bed 475 mm Rotation/rotation Ø via cross slide 260 mm Sledge path plan 260 mm centre distance 1500 mm power capacity 22 kW Gear stages. m= manual / e= electric. 2 e Spindle head DIN 55026 / DIN 55027 A6 / 6 Spindle Ø in front bearing 115 mm spindle bore 78 / 70 mm Iaodpfx Ajwgn Agepnot turning speed range (V-constant) 1 - 3.000 U/min feed range flat 1µ - 1.000 mm/U feed range lengthwise and thread 1µ - 2.000 mm/U Rapid traverse plan/longitudinal 5 / 10 m/min diameter of quill 70 mm quill travel 120 mm quill inner cone 5 MK This machine is used for the production of individual parts and small batches from simple to the most complex contours. It is characterised by: --> Ease of operation Precision Working range

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Technical details are shown on picture. Iedpfx Apoyyniaenoat

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 56 mm, turning length: 345 mm, turning diameter: 380 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, overall weight: 4,200 kg, torque: 72 Nm, travel distance X-axis: 166 mm, travel distance Z-axis: 339 mm, 2 DMG Gildemeister CTX 210 for sale: One from 2007 and one from 2006. Model V2 Iedpfx Ajyw Ndtspnsat Very few spindle hours. CNC Siemens 840D, 12-position turret VDI 30. Supplied with some tooling + documentation for each machine. Test possible by appointment.

Condition: excellent (used), For sale is a Schaublin 125 precision lathe in exceptionally good condition with extensive accessories. The machine was never used in production and shows barely any noticeable wear. Radial and axial runout at the spindle nose is less than 0.001mm. In terms of condition, this machine is almost as new. Naturally, the machine is fully functional and has been thoroughly checked. The brake and the feed control board were recently replaced. This is a rare opportunity to acquire one of the most precise conventional lathes in outstanding condition. TECHNICAL DATA: - Centre height: 125 mm - Centre distance: 500 mm - Maximum workpiece diameter over bed: 270 mm - Maximum workpiece diameter over cross slide: 120 mm - Infinitely variable spindle speeds: 225–3000 rpm - Spindle nose: Camlock D1-3 - Spindle bore: 32 mm - Collets: Schaublin B32 - Collet pass-through: 24 mm - Chuck pass-through: 28 mm - Bed travel: 440 mm - Carriage travel: 90 mm - Cross slide travel: 130 mm - Tailstock quill taper: Morse 2 - Tailstock quill travel: 100 mm - Automatic feeds, longitudinal & cross: 4–260 mm/min, stepless Weight approx. 950 kg Accessories: - Röhm 160 mm 3-jaw chuck - Reishauer 160 mm 4-jaw independent chuck - 160 mm 4-jaw self-centering chuck - 6x Multifix tool holders - Change gears for thread cutting - B32 collet set from 1 to 24 mm with draw tube Iaedpfx Asy Hnucjpnjt - Machine mounts - Complete documentation including original brochure

Condition: used, For sale is a used Weiler Matador lathe. Version VS2 with pre-select gearbox. Comes with change gears and collet set. Good, fully functional condition. Centre height: 140 mm Swing over bed: 295 mm Iodpfsy Hi A Iex Apnoat Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 15 - 3350 rpm Inspection under power possible in 5023 Salzburg. Forklift available for loading.

Condition: used, Year of construction: 2000, turning diameter 400 mm Iajdpfxsvh I T Ae Apnst turning length 1000 mm control FAGOR control CNC 8055/B-T centre height 200 mm centre distance 1000 mm turning dia. over face-slide 210 mm bed width 300 mm spindle bore 65 mm spindle turning speed range 0 - 3000 U/min transmission ratio 2 feeds - longitudinal 0 - 10.000 mm/min feeds - cross 0 - 10.000 mm/min rapid travel - longitudinal/face 15 m/min tailstock quill diameter 68 mm tailstock quill stroke 155 mm tailstock taper MT 4 total power requirement 8 kW dimensions 3,1 x 1,9 x 1,78 m Accessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolant

Condition: used, Year of construction: 1995, turning diameter 560 mm turning length 1250 mm control Sinumerik 805 turning dia. over face-slide 340 mm spindle bore 63 mm spindle turning speed range 3 - 2500 U/min feeds - longitudinal 0,001 - 3 mm/U feeds - cross 0,001 - 3 mm/U rapid traverse longitudinal 7 m/min rapid traverse cross 3,5 m/min thread - mm pitch 0,5 - 140 mm thread - inch 1/4 - 56 Gang/ inch. Iaodpfxoymp Sue Apnjt thread - module mm main drive 19 kW clamping length max. 2250 mm total power requirement 24 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 4,0 x 1,65 x 1,75 m controll Siemens 805, for cone turning, contour turning and threat cutting. Machine has MULTIFIX toolholder system size "C", steady and 3 jaw chuck.

Condition: used, functionality: fully functional, We are selling our Feinbau lathes due to relocation. There are three different machines available. The machines can be inspected and collected on site at our location in Königsbach-Stein. Iasdpfx Aoyzfcaopnjt

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Isdpfxoh Hvk Ao Apnoat Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: excellent (used), Year of construction: 2018, Maximum workpiece diameter 285mm, maximum workpiece length 280mm, Bar capacity 38mm, X axis stroke 480mm, Iaodpfx Aswb A Hcspnst Z axis stroke 285mm, spindle speed 6,000 rpm, power 5.5Kw, swarf conveyor.

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Iasdpfx Apsyucf Rsnst Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret

Condition: excellent (used), Year of construction: 2004, - Fagor digital display - Accessories available Working area Max. turning diameter over bed: 350 mm Max. turning diameter over cross slide: 200 mm Centre height: 180 mm Centre distance: 1000 mm Bed width at guideway level: 255 mm Top slide travel towards headstock: 60 mm Top slide travel away from headstock: 55 mm Spindle nose with flange according to ISO 702-3 (DIN 55027) C6 (DIN 6) Spindle taper: Morse taper 6 Spindle bore: 54 mm Tailstock quill taper: Morse taper 4 Tailstock quill travel: 100 mm Tailstock lateral adjustment: ± 10 mm Ijdpfxeyvy Rns Apnoat Spindle speed range, stepless: 40 – 2500 rpm Feed levels: Longitudinal feed: 9 Cross feed: 9 Feed rates: Longitudinal feed: 0.04 - 0.4 mm/rev Cross feed: 0.02 - 0.2 mm/rev Metric threads: Number: 28 Pitch: 0.2 – 4.5 mm Inch threads: Number: 21 Pitch: 76-8 TPI Module threads: Number: 28 Pitch: 0.2-4.5 mm Diametral pitch threads: Number: 21 Pitch: 76-8 DP Leadscrew thread pitch: 6 mm Tool holder section: 20x20 mm Max. spindle torque: 200 Nm Main drive power: 4 kW (5.5 HP) Electric pump power: 0.12 kW (0.16 HP) Synchronous speed of main motor at 50 Hz: 1500 rpm / at 60 Hz: 1800 rpm Synchronous speed of coolant pump motor at 50 Hz: 3000 rpm / at 60 Hz: 3600 rpm Machine dimensions Length x width x height: 2300 x 940 x 1400 mm Weight: 1500 kg

Condition: used, Year of construction: 2003, turning diameter 320 mm turning length 750 mm control Siemens type 810DL CCUO turning diameter over slide rest 150 mm cross movement 185 mm spindle passage 52 mm turning speeds 14-3550 U/min transmission ratio 2 quill stroke 120 mm rapid traverse 6 m/min main drive motor 7 kW 3-jaw-chuck diameter 200 mm total power requirement 10 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,6x1,44x1,44 m 8950 turning hours The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Iaodpfxsyutuco Apnot than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2004, turning diameter 550 mm turning length 1100 mm control Fagor 8040T turning diameter over slide 230 mm turning dia. in gap 740 mm length of gap 350 mm Iedpfx Aeyuqh Hepnsat spindle passage 72 mm turning speeds 100-4500 U/min Power 7,5 KW 3-jaw chuck 250 mm steady 220 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team