Used Precision Seeder for sale (7,039)

Condition: good (used), Year of construction: 1998, functionality: fully functional, Schaublin 102 N, Machine number BL 329218, Year of manufacture approx. 1998, Center height 102 mm, Gbodpfx Aqjzlcz Esior Distance between centers 375 mm, Max. turning diameter over bed 200 mm, Max. turning diameter over slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories.

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages Gjdpfxozmyvie Aqiobr 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: used, Hydro-mechanical NC machine vice, VIS - HYDRAULIQUE\nPrecision machine vice, clamp\nType 20700\nYear of manufacture approx. 2000\nJaw width 150 mm\nJaw height 42 mm\nClamping range 0 to 250 mm\nMax. opening width 253 mm\nClamping force 6 tons\nGuideway height 51 mm\nGuideway length 450 mm\n- Hydro-mechanical machine vice\n- Quick adjustment with clamping ball lock in 8-position hole grid\n- Rigid base body, precision ground on all sides\n- Can be clamped horizontally, vertically, or laterally\n- Guideway with 19 mm guide slot\n- Additional set of prism jaws included\nDimensions (L x W x H): 480 x 150 x 107 mm\nWeight: 32 kg\nGood condition Gbedpfx Aey Sbxfoqisr

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm centre height ca. 125 mm turning speed range 80 - 3000 U/min number of speeds 18 spindle bore 24 mm tailstock quill taper MT 3 weight ca. 400 kg dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; Gbjdpfx Aqewa Dz Esisr collet chuck device incl. collets 1-20 mm with 1 mm gradient Multifix size A with 3 interchangeable holders; chuck protection with shutdown

Condition: used, centre height 102 mm centre distance 450 mm spindle bore 25 mm spindle speed: 220 - 2600 Gbjdpfxswbi Hps Aqijr Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: excellent (used), functionality: fully functional, from an EDM (electrical discharge machining) machine Travel in X: 220 mm Travel in Y: 160 mm Mitutoyo 2-axis digital readout with a display accuracy of 1/1000 mm . Base without evaluation Gbedpfx Aqjznh E Ieijr .

Condition: ready for operation (used), Faithfull Printing Equipment Digithick TM-353 High-precision Thickness Gauge SN:602262 + Side Table 1040 x 520 x 760 mm, used, normal signs of wear, 100% fully operational, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and transport! Gsdpfx Ajx Eq Hroqiobr

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Electronic control of the X-axis X-axis positioning speed (m/min) 25 Detection of the moving head position using a direct measurement system with an absolute magnetic strip Mechanical adjustment of intermediate angles; maximum external inclination 22°30' Oil-pneumatic blade feed Gjdpfx Aqezr E S Toiobr Useful cutting length (mm) 4,000 Blade diameter (mm) 550 Blade motor power (kW) 2.2

Condition: ready for operation (used), Operating hours: 59,018h, Equipment: Workpiece magazine, Linear transfer system, Station I: Swaging unit HU 15/VE, 4-die version, Stations I+II: Hydraulic feed unit VS 29/200, Version G, Station II: Swaging unit HE 17-V, Station III: Rotary station DS 19, Station III: Cutting tool SW 2, Station III: Hydraulic feed unit VS 29/200, Version A, Hydraulic pump drive, Cooling unit KE 33, Cooling unit KE 15, Central lubrication system, Documentation available, Operating manual, Oil specification, Maintenance and lubrication instructions, Hydraulic schematic HP 361, Hydraulic functional diagram, Hydraulic spare parts list, Electrical schematic with parts list Stp. 484, General assembly drawing. An on-site inspection is possible. Gsdpfxezkvmre Aqiebr

Year of construction: 1985, condition: ready for operation (used), Equipment: Base frame, pump drive, coolant system, central lubrication system, control panel channel, workpiece magazine, feeding unit, linear transfer system, hammer unit, stations I to IV, hammer unit HE0, station V, cutting tool, hydraulic feed unit VS29/200, version F and X, hydraulic control system, electrical control system, hydraulic oil capacity: 175 l, lubrication oil capacity: 60 l, operating hours: 55,349h. Documentation available. On site inspection is possible. Gsdjzkvlnopfx Aqisbr

Year of construction: 1991, condition: ready for operation (used), Connected load: 11.5kW, rated voltage: 380/220 V, rated current: 25 A, control voltage: 24 V, upstream fuse: 35 A, operating hours: 56,780 h. Equipment: Complete machine assembly, Machine base, Workpiece magazine, Linear transfer system, Hydraulic feed unit (Stations I-IV): Version F, Option X, Hammering unit (Stations I+II): HE 17/D, Three-jaw version, Hammering unit (Stations III+IV): HE 17/E-D, Hydraulic feed unit (Station V): VS 29/200, Version F, Option X, Hammering unit, Cutting tool, Pump drive, Coolant system, Central lubrication system, Including hydraulic circuit diagram, Equipment list, Functional diagram, Electrical schematic. An on-site inspection is possible. Gbjdpfezkvl Ujx Aqier

Year of construction: 1985, condition: ready for operation (used), Equipment: Base frame, pump drive, hydraulic oil capacity, coolant system, lubrication oil capacity, central lubrication system, control panel channel, workpiece magazine, linear transfer system, hammer unit, cutting tool, hydraulic feed unit, hydraulic control system, electrical control system, operating hours: 77,107h. Documentation available. On site inspection is possible. Godpfjzkvlhsx Aqiobr

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. Godpjzt A H Refx Aqiebr The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: like new (used), Shimadzu Precision Balance UX4200H Electronic precision balance from the Shimadzu UniBloc series, featuring high resolution for laboratory, quality assurance, and industrial measurement applications. Power adapter included. Manufacturer: Shimadzu Gbsdpfozdah Uox Aqisr Model: UX4200H Series: UniBloc Balance Type: Electronic Precision Balance Maximum Capacity: 4200 g Readability: 0.01 g Minimum Load: 0.5 g Display: LCD Weighing Pan: Stainless steel Interface: Print function available Condition: Used

Condition: new, Precision surface grinding machine MIOTAL FSM 3060 AH Table size: 300 x 600 mm Installation height: 500 mm Max. table load: 300 kg Motor power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All cast iron parts, such as machine frame, table, etc., made of MEEHANITE® quality cast iron - Automatic transverse and longitudinal feed - Permanent lubrication - Automatic transverse feed device - Rear splash guard - Grinding wheel - Grinding wheel flange - Dressing device - Balancing arbour - Balancing scale - Dressing diamond - Machine lamp - Leveling elements - Operating tool - Operating manual - CE Special equipment for our stock machine: - Electric magnetic chuck 300 x 600 mm (fine-pole) - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic vertical feed AD 5 (NC-controlled) for model AH - Function: Automatic rapid traverse vertically and automatic fine feed vertically Gbsdpod Sfd Eefx Aqijr - Automatic demagnetization control for magnetic chuck - Coolant system with magnetic separator - Manual dressing device - Part enclosure - Ergonomically arranged control panel - Additional grinding wheel flange - Ball screw for transverse feed - Grinding wheel and flange for normal steel - Grinding wheel and flange for HRC55 Alternative equipment features / other machine configurations available on request.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 200 x 450 mm Installation height (Max. distance spindle/table): 450 mm Max. Table load: 150 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2080 x 1200 x 1700 mm Weight, approx.: 950 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel Gedjp Dt Ttopfx Aqiebr - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 2550 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 250 x 500 mm Installation height (max. distance spindle/table): 500 mm Max. Table load: 250 kg Motor power main spindle: 1,5 kW Connection: 400 V Godpfx Aqep Dt T Neisbr Dimensions (LxWxH), approx.: 2250 x 1400 x 1800 mm Weight, approx.: 1350 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Pictures may show the machine with special accessories and with application examples.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 400 x 800 mm Installation height (max. distance spindle/table): 550 mm Max. Table load: 400 kg Motor power main spindle: 3,7 kW Connection: 400 V Dimensions (LxWxH), approx.: 3450 x 2050 x 1900 mm Weight, approx.: 3250 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication Gsdpfjp Dt Uisx Aqiebr - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 3060 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: like new (used), Michilin MCL AP 80 precision vice Condition: As good as new, unused Jaw width: 70 mm Gsdpevygwdofx Aqiobr Jaw height: 32 mm Opening width: 83 mm

Condition: excellent (used), functionality: fully functional, 1 x Tailstock lathe Precision engineering PM 1-FZ Equipment: - Hand lever cross slide with Tripan quick-change system - Electric tailstock for drilling and threading - Collet chuck with draw-in collets Gbsdjzl Dr Ejpfx Aqisr Technical data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Maximum diameter over bed: 220 mm Accessories: 20 x Draw-in collets 359 E K 23 (1 - 20 mm/ 1 mm increment) 1 x Draw-in collet in tailstock 319 E K 12 1 x Tripan tool holder with 1 cassette Operating manual (copy) Additional accessories, such as collets, are available at an extra charge. The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, 1 x Backturning lathe Precision engineering PM 1-FZ Year of manufacture: 1995 In very good condition with a comprehensive range of accessories. Equipment: - Hand lever cross slide with Tripan quick-change system - Electric tailstock for drilling and threading - Collet chuck with draw-in collets - Coolant system Technical data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Largest turning diameter over bed: 220 mm Accessories: 39 x draw-in collets 359 E K 23 (1 - 20 mm, 0.5 mm increments) + 5 x square collets 10 x draw-in collets in tailstock 319 E K 12 (1 - 10 mm, 1 mm increments) 1 x Tripan quick-change tool holder with 1 cassette 1 x spindle in tailstock with MK 2 taper Gbodpfxoqyfpme Aqijr 1 x MK 2 drill chuck Röhm 1 - 10 mm 1 x simple clamping tool holder Operating manual (copy) Photos of the accessories will follow. Further accessories, such as collets with intermediate sleeves, are also available in stock. The machine can be inspected while powered on.

Condition: good (used), functionality: fully functional, Center height 110 mm Center width 160 mm Spindle bore 23 mm Gbsdezl Ew Njpfx Aqisr 3 speeds for clockwise rotation and 3 speeds for anti-clockwise rotation

Condition: excellent (used), I am offering for sale a high-quality RÖHM KFD-HS 200/3 hydraulic lathe chuck, designed for professional CNC lathes. The chuck is in very good technical and visual condition. It looks practically new and appears to have been used only a few times. The working surfaces and guides show only minimal signs of use. The set includes: Gedpfxszlaqks Aqiebr * RÖHM KFD-HS 200/3 lathe chuck, * 3 standard jaws, * 3 RÖHM 538-55 top jaws, * operating wrench, * sturdy wooden transport box (I am not sure if this is the original box for this chuck). Technical data: * Manufacturer: RÖHM * Model: KFD-HS 200/3 * Diameter: 200 mm * Type: hydraulic 3-jaw lathe chuck * Maximum clamping force per jaw (Fmax): 48 kN * Total clamping force (Fges): 110 kN * Maximum rotational speed: 6500 rpm * Identification number: 155099 * Top jaws: RÖHM 538-55 * Country of manufacture: Germany The chuck is ideal for professional applications in machining and working on CNC lathes. It is a robust piece of equipment from the renowned German company RÖHM, which is valued for its high quality and precision.

Condition: used, Hydromechanical, NC machine vise, VIS - HYDRAULIQUE Precision machine vise, spanner Type 20700 Gbsdezczvqspfx Aqisr Year of manufacture approx. 2000 Jaw width 150 mm Jaw height 42 mm Clamping range 0 to 250 mm Opening width max. 252 mm Clamping force 6 tons Guide rail height 51 mm Guide rail length 450 mm - Hydromechanical machine vise - Quick adjustment with clamping ball lock in a hole grid, 8 positions - Stable base body, ground on all sides - Can be mounted horizontally, vertically, or laterally - Guide rail with 19 mm guide groove - Additionally, 1 set of prism jaws Dimensions L x W x H 480 x 150 x 107 mm Weight 32 kg Good condition

Condition: new, Diamond Wire for Precision Cutting Suitable for semiconductor, silicon wafer and precision material cutting applications. Manufacturer: Diamond Wire Material Technologies Gedjzta E Rspfx Aqiebr Quantity: 7 spools available Price: EUR 700 per spool Specifications: Part No.: 17GNPU2506M30 Length: 30 km per spool Wire diameter: 231 µm Diamond size: 22–36 Core: 175 Spool type: MB80 Break strength: 97.8 N Original manufacturer's quality certificate included. New, unused.