Used Protostar Indexable Insert Drill for sale (7,359)

Condition: good (used), Capacity up to 40 mm Mount: Mk-4 Bjdjy Ht H Rjpfx Al Ijdb Left/right rotation Variable speed with variator drive

Condition: excellent (used), ERLO TCA 32 column drilling machine with automatic feed. Capacity: 32 mm Spindle taper: MK-4 Speed: 8 steps, between 93 and 1420 rpm Feed: 0.10 - 0.18 - 0.24 mm/rev Bdjdpfx Alsy Hrido Ijb Machine equipped with a cross table.

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Bsdpfx Aletx E Rqs Iodb Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Morse taper MK 2 Throat depth: 245 mm Bdodpfxey Ih Tzj Al Isb Drilling depth: 100 mm Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Bdodjw Naabjpfx Al Ijb Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: excellent (used), Boring bar Bdsdpfjum Uzgex Al Iob Bar diameter: 180 mm Overall length: 2500 mm Weight: 920 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1993, 1 used column drilling machine Brand: Alzmetall Model: AB 36 Year of manufacture: 1993 Spindle taper: MK 4 Drilling capacity in steel St 60: 34 mm Drilling capacity in cast iron GG 20: 40 mm Max drilling capacity in St 60: 40 mm Bsdpfx Aloy H Dfwe Iodb Thread cutting in ST 60: M 24 Thread cutting in GG 20: M 30 Reach: 330 mm Column diameter: 145 mm Spindle stroke: 160 mm with automatic drilling feed Total power requirement: 1.3 kW Machine height: 1865 mm Weight approx. 470 kg

Condition: excellent (used), Year of construction: 1996, Overhauled in 2005 Number of spindles: 2 Bsdpfx Ajy Eykgel Ijdb Drilling capacity per spindle, steel: 1-6 mm Drilling depth: max. 350 mm Travel distance Z: 350 mm Travel distance W: 350 mm Drive power per spindle - 100% duty cycle: 3.7 kW - 50% duty cycle: 5.5 kW Spindle speed: 3,000 - 27,000 rpm Spindle mounting: Ø 10 - 60 mm Coolant pressure: max. 150 bar Coolant flow rate: 48 l/min Coolant volume: 1,000 l

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: Bsdpfx Aexlqxfsl Isdb - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: used, Year of construction: 1994, functionality: fully functional, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Cooling Bodpfx Alsv Rpf Se Ijdb Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Brand: GSP Model: 407C22 Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Vertical arm travel: 850 mm Bdedpfoy D Hr Uox Al Ieb Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: new, Year of construction: 2022, bore capacity in steel (diameter) 35 mm throat 350 mm bore stroke 180 mm thread dia. M 24 mm feeds 0,1 - 0,2 mm/U spindle turning speed range 100 - 1450 U/min spindle taper MT 4 table surface area 560 x 385 mm Distance spindle/table max. 780 mm distance spindle/base plate 1320 mm voltage 400 V / 50 Hz total power requirement 1,5 kW weight of the machine ca. 0,46 t dimensions of the machine ca. 1,2 x 0,7 x 2,4 m • with cooling and thread cutting device, • adjustable bore depth with automatical switch-off, • left-/right rotation of spindle, • adjustable chip protection Bedpfxoy H Nvbj Al Isdb

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: AB/222595, total width: 1,950 mm, total length: 2,300 mm, total height: 1,850 mm, empty load weight: 1,240 kg, Equipment: CE marking, MACHINE DETAILS Bdsdpfxsy Akdxj Al Iob Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,950 x 1,850 mm Unladen weight: 1,240 kg Voltage: 400 V Power consumption: 10 A EQUIPMENT CE marking

Condition: good (used), centre height 220 mm table diameter 220 mm Bdjdpfx Alju Sbl Re Isb 250mm - chuck - 3 jaws 80mm passage Can be used vertically and horizontally Standing tip height 220mm

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm Bdjdpeuhhzhofx Al Isb bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: not inspected (used), Year of construction: 1987, machine/vehicle number: 5755, functionality: unexamined, drilling depth: 120 mm, rotational speed (max.): 1,125 rpm, rotational speed (min.): 160 rpm, table width: 300 mm, table length: 300 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Speed range: 160 – 1,125 rpm Bodpfxjy D Sydo Al Iodb Drilling depth: up to 120 mm Table dimensions: 300 x 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 500 x 1,800 mm Machine weight: 250 kg FEATURES Vice External reference: 18

Condition: good (used), Drill bits, twist drills, drill bits Bdodpjy A Inusfx Al Ieb -Manufacturer: Maysso / Unisto / Hartner / Stock, Spiral drill bits 6 pieces Ø 51 - 70 mm -Type: Two-flute end mill, MK5 chuck with flat drill tip -Size/Quantity: see photo parts list -Price/Fee: complete -on request: various sizes/quantities available from further stock -Transport dimensions: 345/270/H100 mm -Weight: 23.7 kg

Condition: good (used), Drill bits, twist drills, drill bits -Manufacturer: Gühring / Unisto / Hartner, Spiral drill bits, 11 pieces, Ø 51 - 75 mm -Type: Double cutter, MK5 chucks Bdjdpfxsy A Ihno Al Ijb -Size/Quantity: see photo parts list -Price/Fee: complete -on request: various sizes/quantities available from further stock -Transport dimensions: 650/430/H75 mm -Weight: 44 kg

Condition: good (used), Drill bits, twist drills, drill bits Bodpfx Aljrqin Hj Ijdb -Manufacturer: Gühring / Maysso / Titexplus, Spiral drill bits, 7 pieces, Ø 29 - 48 mm -Type: Double cutter, MK4 chucks -Size/Quantity: see photo parts list -Price/Fee: complete -on request: various sizes/quantities available from further stock -Transport dimensions: 340/290/H45 mm -Weight: 12.1 kg

Condition: good (used), Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) Bdedpfsv H D N Rsx Al Isb -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, STC-Ref:G-182-3197 STAGO-PB-2015 ,Year: 1995 Bdsdpfx Aey It E Ael Ieb equipped with: - paper drilling machine 2 spindles - model: Stago PB-2015 - Drill spindle spacing: 60–120 mm

Condition: used, bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm spindle taper MK 3 number of spindle speeds 12 spindle speed: 35 - 5600 Upm column diameter 92 mm table-size 340 x 360 mm table rotating 360 ° Bdedpfxefbh Aks Al Iob total power requirement 1,5 kW weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm

Condition: good (used), Spindle: 130 mm Travel X: 5000 mm Travel Y: 2500 mm Bdodpfx Ajy D Tvgel Iob Travel Z: 1000 mm Rotary table: 2000 x 2500 mm, approx. 30 tons With faceplate Vertical head Some tools included Without platen field

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, type of input current: three-phase, spindle mount: MK 3, drilling depth: 120 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 200 rpm, total width: 400 mm, total length: 600 mm, total height: 1,820 mm, table width: 320 mm, table length: 400 mm, Flott SB M3 ST 3-phase 380V motor runs smoothly. Stepless speed adjustment via variomatic spindle drive. Spindle speed adjustable from 200 to 2000 RPM. MT3 spindle taper. Röhm Supra 3-16mm drill chuck included. Machine vice included. Bedpfx Aley D Uiho Iodb Spindle safety guard. Emergency-off switch. Drilling depth adjustable. Maximum drilling depth: 120mm Table size: 400x320mm Table height adjustable. Overall dimensions: 60x40x182cm Year of manufacture: 1987 Made in Germany Overall good condition. Contact us for shipping options! € 2,350.00

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing Bdjdpfxoy E T Dgo Al Iob - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition