Used Rego Pm 60 for sale (22,845)

Condition: ready for operation (used), Alpha SPG 75-MF1-7 gearbox SN: 203771 - 6000 rpm, used, in good condition, fully functional, delivery scope as per photos. Isdpfoy Nn Hkex Aayoaw

Condition: ready for operation (used), ATB Motor - 400V / 2860 RPM / 11 A - IP54 / 50Hz with pump - Length: 127 cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iajdpfx Aaorwtmzsyow

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Iasdswc Afhepfx Aayow Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x pallet rack beam, used Material color: yellow Box profile: 60 x 40 mm Beam type: TRV1-270-064-30 CE Clear span: 2,700 mm Bracket: 5 HK (hooks) 02x safety pins, used Design: fully galvanized For securing the cross beams against accidental lifting Iaodeynlraopfx Aayow Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is desired, additional costs will apply. These can be requested from us separately depending on the delivery location and scope of delivery.

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 08/2027, electrical fuse: 16 A, input frequency: 50 Hz, Mixing machine / whipping machine TOP Rego model: SM 2000 M The machine for all your mixing and whipping needs! with timer control 2 operating functions: 1 x mixing / 1 x whipping 1 mixing whisk, 1 whipping whisk 1 32-liter stainless steel bowl Bowl lighting Connection: 400V, 16A-CEE plug Quality from a specialist company! Used machine, refurbished with warranty and spare parts service Option: additional accessories More TOP mixing machines in stock! Iasdew Hk Daepfx Aaysw

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg Iodpszhvaaofx Aaysaw ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 07/2027, total length: 680 mm, overall weight: 385 kg, total width: 720 mm, total height: 1,760 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 385 kg, Mixing machine, whipping machine Rego TOP model: SM 4 RMT, refurbished Iedjw Hk Aijpfx Aaysaw with timer control The machine for all your mixing and whipping needs! 2 operating functions: 1 x mixing / 1 x whipping Working shaft/mixing shaft newly overhauled Powerful and robust technology Connection: 400V, 16A CEE plug Dimensions: 720 x 680 x 1710 mm, W x D x H Quality from a specialist company! Used machine, refurbished with warranty Optional: additional accessories ring gas burner new boiler new whipping beater new mixing beater maintenance contract service package delivery service instruction and commissioning Visit our large showroom!

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 07/2027, overall weight: 320 kg, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 320 kg, TOP Mixing Machine Rego SM 2000 Mixing machine with timer control 1 mixing paddle, 1 whisk 1 32-liter stainless steel container Container lighting Connection 400V, 16A-CEE plug Used machine, refurbished with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Optional: additional accessories Ring gas burner Maintenance contract Service package Iaodoygcxbopfx Aaysw Delivery service Instruction / Commissioning We have many more mixing machines in stock!

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 07/2027, total length: 615 mm, overall weight: 258 kg, total width: 640 mm, total height: 1,380 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 258 kg, TOP mixing machine, Rego SM 2, refurbished Stationary machine 2 working functions: 1 x stirring / 1 x whipping Iedezb Udlopfx Aayoaw Bowl lighting Connection: 400V, 16A-CEE plug Dimensions: 640 x 615 x 1380 mm (W x D x H) Quality from a specialist company! Refurbished used machine Visit our large exhibition of mixing machines!

Condition: good (used), Year of construction: 2014, functionality: fully functional, input voltage: 400 V, overall weight: 195 kg, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 195 kg, Mixing and beating machine Rego model: SM 40 with timer control 1 mixing beater, 1 whisk beater Ijdpfx Asyw Eawoaysaw 1 32-liter stainless steel container Connection: 400V, 16A-CEE plug Used machine

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SM3/101/13, year of last overhaul: 2025, warranty duration: 6 months, height adjustment type: mechanical, total length: 680 mm, total width: 690 mm, total height: 1,590 mm, empty load weight: 277 kg, Used machine Completely dismantled by bak-tec, mechanics overhauled & newly painted Electrical system newly installed by a local specialist company for control panel engineering 6 months warranty Features: + Stationary machine, mounted on a base plate, 4 holes prepared for foundation bolts + 32-liter capacity, optionally reducible to 20 liters + 2 operating modes (mixing & whipping) + With manual timer and automatic operation + With kettle lighting + With mechanical bowl height adjustment Iodoug Ud Topfx Aayjaw + With infinitely variable speed control and beater adjustment + Complete overhaul in our workshop to German quality standards + Only high-quality original parts installed + Machine has been final-inspected by our master baker + Supplied with operating manual Quantity/capacity information (according to manufacturer, depending on product): Dough: min. 0.5 liters / max. 6 liters Mass: min. 1 kg / max. 24 kg Cream: min. 1 kg / max. 15 kg STANDARD equipment included in price: + incl. 1x 32-liter stainless steel bowl, new + incl. 1x whisk size 3, new + incl. 1x mixing paddle size 3, new Technical data: - Motor power: 1.5 HP - Speeds: 85 - 760 rpm - Fuse protection: 16A CEE plug - Electrical connection: 400 V - 3Ph - 50Hz - Protection: 16A CEE plug - Dimensions: 690 x 680 x 1590 mm (W x D x H) - Net weight: approx. 277 kg

Condition: excellent (used), CATALOGUE NUMBER: 6935 TECHNICAL DATA - Shaft width: 630 mm - Number of knives: 4 pcs - Maximum thickness of the workpiece: 210 mm * From above: - Pawls - Toothed infeed shaft, pull-type - Pressure rollers - Planing shaft - Pressure rollers - Smooth outfeed shaft, pull-type * From below: - Adjustable rollers in the lower bed, 2 pcs - Motor: 4.4 kW Iedsy T Rfwspfx Aayeaw - 2 types of feed speeds - Dimensions (L/W/H): 1220x950x1060 mm - Weight: 750 kg ADVANTAGES - Made in Germany - Used thickness planer, very good condition Net price: 12,900 PLN Net price: 3,071 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (The price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: Iedpjy Sny Aofx Aayoaw - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, cutting width (max.): 16 mm, type of input current: three-phase, total length: 700 mm, total width: 1,000 mm, total height: 1,050 mm, control voltage: 24 V, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, space requirement height: 1,050 mm, space requirement length: 700 mm, space requirement width: 1,000 mm, Rego Herlitzius Roto Shop DL circular knife machine stainless steel version mobile, with oiling Knife reground and coated manual operation via rotary control Cutting width 3 - 16mm Connection 400V, 16A-CEE plug Bread chute: 40 x 23 cm Dimensions: 1000 x 700 x 1050 mm, WxDxH Used machine cleaned with guarantee Isdpfx Aajmfnz Teyeaw Visit our large bakery machine park!

Condition: excellent (used), Year of construction: 2010, total height: 3,300 mm, total length: 5,600 mm, total width: 4,300 mm, table load: 2,000 kg, overall weight: 10,500 kg, Spindle SK 40 Speeds 8000 Rpm with 165 Nm Workload 2000 Kg ATC 56 Positions Iedpfxjyh U E Ho Aayjaw Hours spindle 10.304 Closed housing with automatic top door IKZ Coolant system LTA Air Cleaning Length:5600mm Width:4300mm Height:3300mm Weight:10500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, cutting width (max.): 16 mm, type of input current: three-phase, total length: 700 mm, total width: 1,000 mm, total height: 1,050 mm, nominal power: 1.6 kW (2.18 HP), input frequency: 50 Hz, space requirement height: 1,050 mm, space requirement length: 700 mm, space requirement width: 1,000 mm, Rego bread slicing machine Stainless steel version, mobile Ijdsvktlvjpfx Aayjaw Manual operation via rotary control Cutting width: 3 - 16 mm Connection: 400V, 16A CEE plug Dimensions: 1000 x 700 x 1050 mm (W x D x H) Used machine, SAB inspected Many more bread slicing machines in stock!

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 07/2027, total length: 615 mm, overall weight: 258 kg, total width: 640 mm, total height: 1,380 mm, electrical fuse: 16 A, empty load weight: 258 kg, TOP Rego SM 2 stand mixer, refurbished Stationary unit Isdpfszaigfjx Aayeaw 2 working functions: 1 x mixing / 1 x whipping Bowl illumination Connection: 400V, 16A CEE plug Dimensions: 640 x 615 x 1380 mm (W x D x H) Used machine, refurbished Quality from a specialist company!

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: RMS6, Versie 3.18, total height: 2,600 mm, total length: 4,210 mm, total width: 2,350 mm, table width: 405 mm, table height: 405 mm, table load: 800 kg, rotary table diameter: 405 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSKE40, number of spindles: 1, number of slots in tool magazine: 26, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Röders RFM 600-DS is a high-speed (HSC) milling/machining centre. This machine is designed for applications such as high-precision engineering, high speed cutting (HSC), and for small to medium-sized workpieces like mould parts, tools, injection moulding frames, precision components, housings, and complex geometries. The machine is equipped with a chip conveyor, Blum laser, 3D tool probe, Hirschmann 9000 zero-point clamping system, electronic handwheel, Extor extraction unit, and all original documentation. Isdpsxcvgijfx Aaysaw Weight: approx. 7000kg Dimensions: 4210x2350x2600 (LxWxH) For further information such as positioning accuracies, see last image!

Condition: excellent (used), functionality: fully functional, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 07/2027, overall weight: 258 kg, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 258 kg, Rego Vario Stainless Steel Mixing Machine The machine for all your mixing needs! With automatic timer 2 working functions: 1 x mixing / 1 x whipping 1 mixing attachment, 1 whipping attachment Iaedpfjxmrbqox Aayow 1 32-liter stainless steel mixing bowl Manual bowl lift Robust technology Connection: 400V, 16A CEE plug Used machine, cleaned Quality from a specialist company! Benefit from over 35 years of experience! Optional: Additional accessories Ring gas burner Maintenance contract Service package Delivery service Instruction / Commissioning We offer a wide selection of mixing machines!

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 07/2027, total length: 650 mm, overall weight: 285 kg, total width: 690 mm, total height: 1,560 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 285 kg, Rego SM 3 mixing machine, refurbished Mixing machine with timer control The machine for all your mixing needs! 1 mixing beater, 1 whipping beater 1 32-liter stainless steel container Working shaft/mixing shaft newly refurbished Powerful and robust technology Container lighting Only available from us, DGUV V 3 tested Connection 400V, 16A CEE plug Ijdjy U Tudspfx Aayeaw Quality from a specialist company! Used machine

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 07/2027, total length: 615 mm, overall weight: 258 kg, total width: 640 mm, total height: 1,380 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 258 kg, Rego SM 2 mixing machine, refurbished Stationary machine 2 working functions: 1 x mixing / 1 x whipping Bowl lighting Connection: 400V, 16A-CEE plug Dimensions: 640 x 615 x 1380 mm (W x D x H) Iodpfjy U Tt Tox Aayjaw Used machine, refurbished Quality from a specialist company! Benefit from over 35 years of experience! Optional: Ring gas burner Maintenance contract Spare parts box for increased safety Delivery service

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 08/2027, height adjustment type: electric, total length: 800 mm, overall weight: 258 kg, total width: 630 mm, total height: 1,500 mm, electrical fuse: 16 A, input frequency: 50 Hz, TOP Batching machine Rego SM 2 E Mixing machine Rego Digital control 2 operating functions (1x mixing / 1x beating) Iasdjytlthepfx Aayow 1 stainless steel mixing bowl, 20 liters 1 mixing whisk, 1 beating whisk Robust technology Working shaft new Only available from us, DGUV V3 certified Connection 400V, 16A CEE plug Used machine, refurbished & SAB tested With warranty + spare parts service Visit our large showroom!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, cutting width (max.): 16 mm, type of input current: three-phase, total length: 700 mm, total width: 1,000 mm, total height: 1,050 mm, input frequency: 50 Hz, year of last overhaul: 2022, space requirement height: 1,050 mm, space requirement length: 700 mm, space requirement width: 1,000 mm, Rego Roto Shop DL Circular blade cutting machine Blades newly sharpened and coated Manual operation via rotary control Cutting width 3 - 16 mm Connection 400V, 16A-CEE plug Dimensions: 1000 x 700 x 1050 mm, WxDxH Used machine, cleaned, SAB inspected Iodpjrhv E Nsfx Aayeaw Option: Maintenance contract Delivery service Training and commissioning TOP bread slicing machines in stock!

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, DGUV certified until: 06/2027, overall weight: 25 kg, input frequency: 50 Hz, empty load weight: 25 kg, Mixing Maschine Iedpfx Asdlxgtjayoaw Rego SM 2,3 and 4

Condition: new, For sale: high-quality industrial Siemens SIMOTICS motor. Condition: new, unused, original packaging (warehouse stock, may show slight marks from storage). 🔧 Technical data: Manufacturer: Siemens Model: 1FE1093-6WU11-1BN2-Z Serial number: YFJ86378498 001 Type: 3-phase motor (servo / torque motor) Voltage: 425 V Current: 43.0 A / 60.0 A Power: 16.8 kW / 21.5 kW Rated speed: 1600 rpm Max speed: 7000 rpm Max torque: 165 Nm Rated torque: 86 Nm Protection class: IP00 Insulation class: 155 (F) Duty type: S1 Cooling: water-cooled (8 l/min, max 25°C) Standard: EN 60034 Temperature sensor: KTY84-130 📏 Construction: direct drive (torque motor) high-precision manufacturing intended for industrial applications without gearbox 💡 Applications: CNC machines Iodpfx Aajyx I Sloyoaw drive axes industrial automation production lines 📦 Included: Siemens motor original packaging