Used Ribes M 5 for sale (97,214)

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 78 mm, travel distance Y-axis: 56 mm, travel distance Z-axis: 50 mm, General Speed: 60,000 rpm Spindle power: 0.625 kW Torque: 10 Ncm Tool holder: HSK-EZ15 Number of tools: 60 Working area Travel in X: 78 mm Travel in Y: 56 mm Travel in Z: 50 mm Ibedpfjzf Hrnox Afheb B-axis: -110° to +110° C-axis: 400 rpm Chip-to-chip time: 3.5 sec Rapid traverse: X/Y/Z 30/30/30 m/min Workpiece changing device Technology: Zero-point clamping system Workpiece changing time: 10 sec Max. table load: 10 kg Equipment Chip management: Chip conveyor Coolant management: Coolant system Tool measurement: WZK length measurement / -break Other: Automation Feed 5 - retrofittable

Condition: ready for operation (used), Year of construction: 2007, operating hours: 65,000 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 45 mm, injection weight: 289 g, Clamping force 1300 kN Mould opening force, max. 70 kN Size of mould platens (h x v) 745 x 770 mm Distance between tie bars (h x v) 470 x 470 mm Mould opening stroke 600 mm Mould height min 300 mm Max. daylight 900 mm Hydraulic ejector - stroke 150 mm Ejector force 23/10 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22,4 Injection pressure 2336 bar Stroke volume 318 ccm Shot weight (PS) 289 gr. Injection rate 143 ccm/s Screw speed 265 1/min Plasticising rate max. 29,3 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 15,5 kW Adjustable barrel heating zones 5 Oil Reservoir capacity 400 ltr. Dimensions and weights: Dimensions of the machine ca. 5,00 x 2,00 x 2,20 m Total machine weight 8000 kg Max. mould weight 1490 kg Accessories: - Anti vibration pads - 2 x 6-fold water regulator Ibjdjzyrudepfx Afheb Additional Options: - 2 x Air valves - 1 x hydr. Core pull - 12 x hotrunner controller - Robot interface according to Euromap 67 - Accumulator - 1 x pneum. core pull

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Used Blue Mac 2510 Static Trommel Iodpozzrwbsfx Afhjbb Year 2016 10 M Long x 2.5 M Diameter 50mm Round Holes, 8mm Thick All New Drive Shafts & Wheels 4 x 5.5kW Electric Motors / Bonfiglioli Gearboxes 21 Tonne Weight Excellent Condition Ready To Go To Work

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, total width: 1,050 mm, total length: 1,920 mm, total height: 2,160 mm, filter area: 23.75 m², suction capacity: 1,500 m³/h, Equipment: type plate available, HERDING brand dust extraction and welding fume extraction system. Self-cleaning filter, pneumatic, suitable for plasma, laser, abrasive blasting, grinding gypsum, cement, plastics, and all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Model: Delta Comp 1500-5/9 SB Fan power: 5.5 kW Capacity: 1500 m3/h Filtration area: 23.75 m2 Inlet diameter: 150 mm Iodpfxozpxdko Afhebb Height: 2.16 m Width: 1.05 m Depth: 1.92 m Weight: 1200 kg Stock number: 1158

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, Equipment: chip conveyor, documentation/manual, Machine Name - Okuma Isdpfjzair Usx Afhjbb Machine Model - MX45VAE Y.O.M 2000 Descriptions - OSP 700M Spindle Speeds 7000 rpm BT40 taper Table Size 1000 mm x 460mm X – Axis Travel 560mm Y – Axis Travel 460mm Z – Axis Travel 450mm 20 station ATC Renishaw tool setter Renishaw work probe Coolant system and conveyor 2 x identical machines available

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Ibjdpezwgiqefx Afhob

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic Iedpfx Ajzb I Iwsfhobb - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00349, load capacity: 350 kg, arm reach: 2,650 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/350 manufactured in 2012.02. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/350 Model Number: A05B-1327-B501 Year of Manufacture Robot: 2012.02 Warranty term (months): 12 Ibjdpfez Ag Uqsx Afhob   Payload (kg): 350 Reach (mm): 2650 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1800   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.02 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Year of construction: 2020, condition: used, functionality: limited functionality, We offer this technological line for pellet production from vegetable waste (sunflower husk) – BART-M SRL OGM 1.5, manufactured in 2020, in used condition. Manufacturer: BART-M SRL Model: OGM 1.5 Year of manufacture: 2020 Condition: used Category: 34 Ibedpfx Afsztaahohsb Productivity: 800 kg/hour Weight kg: 6800 Dimensions mm Length: 5385 Width: 4400 Height (without exhaust pipes): 6935 Traction: electric Energy performance Total installed power kw: 150 Type of current: Alternating Current frequency hz: 50 Network voltage V: 220/380 Agrotechnical performance: Admissible amount of non-granulated raw material: 2% max Admissible moisture content of cooled granules: 12% max Technical characteristics of the finished product: Caloric value of the granules Mj/Kg: 14-19 (vegetable waste) Kw/kg: 3.89-5.27 Diameter mm: 6-8 Length mm: 40 If you have any further questions or need more information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Ibjdezy Ndcopfx Afhjb Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: used, Year of construction: 2023, turning diameter 380 mm turning length 1000 mm control Mazatrol SmoothG max. swing diameter over bed 695 mm Standard machining diameter 276 mm bar material dia. max. 80 mm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min z-axis 1090 mm rapid traverse Z-axis 33 m/min w-axis 1050 mm rapid travel W 30 m/min turning speeds 35 - 4000 U/min spindle nose A2-8 spindle bore 91 mm Motor output (30-min. rating) 26/22 Max. Torque 465 (15% ED) Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (25%ED) 11 Max. Torque 90 (15% ED) Nm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 x 2,5 coolant tank 270 l Chuck diameter main spindle 10 '' Chuck diameter counter spindle 8 '' total power requirement 37 kW weight of the machine ca. 6,6 t dimensions of the machine ca. 3,6 x 2 x 1,9 m Machine in standard configuration, equipped with the following optional equipment: Air blast through the turret Automatic operator door – opening and closing Air blast system at the main spindle chuck Chip conveyor High-pressure coolant system, 15 bar Robot interface (ADVANCE / Ethernet/IP) C-axis on the sub-spindle, input resolution (contour/indexing): 0.0001° Additional push buttons on the CNC control panel Sub-spindle tailstock function Rectangular 3-colour LED signal light Preparation for oil mist extraction, mechanical flange only, Ø 98 mm Absolent 10C oil mist extraction system Preparation for bar feeder Overload monitoring system Drilling cycle with torque-dependent chip breaking Engraving function Ibjdpfjzzd Rtjx Afhsb Thread re-cutting function All dimensions, weight and performance specifications are non-binding. Used machine – sold without warranty.

Condition: used, machine/vehicle number: 52 / 519, spindle diameter:90 mm x-travel:700 mm distance between columns:900 mm size of table:770 x 900 mm x-Travel:700 mm y-travel:500 mm z-travel:1100 mm feed range - table:15 - 280 mm/min rapid traverse Z-axis:530 m/min spindle bore diameter / taper:MT4 (Morse) mm spindle bore diameter:max. 230 mm spindle stroke - max.:170 mm spindle speeds low range:10 U/min spindle speed high range:2000 U/min vertical feeds of spindle head::0.02 - 0,2 mm/r feed steps:6 Iedpfx Aoh Ra Stofhobb Main spindle capacity:3 kW total power requirement:4,2 kW weight of the machine ca.:4 t dimensions of the machine ca.:1,9 x 2,2 x 2,4 m Hauser (SIP) High Precision Co-ordinated Jig Boring Machine, Model - M5 Douple Column Design Boring machine Large table (900 x 770 mm) for bulky Objects. All Axis are equipped with Fine Dial for High Presion Boring. A Complete Accesseries and tools are Avilable with the machine ( Drill Bits, Drill Chucks, Multiple Boring heads, Boring Inserts and Bits, Small and large rotary index table for small and big loads).

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7HAA047, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 14,000 rpm, spindle speed (min.): 140 rpm, quill diameter: 65 mm, rapid traverse X-axis: 4,200 m/min, rapid traverse Y-axis: 4,200 m/min, rapid traverse Z-axis: 4,200 m/min, table width: 550 mm, table length: 1,000 mm, table load: 550 kg, overall weight: 6,500 kg, workpiece weight (max.): 550 kg, MITSUBIISHI M-V4050 Vertical Machining Centre, new 2005, ex aerospace enviroment. Ibsdpfx Afeyr Nh Hshsb Fanuc 16iMB control, with hand controller, 30 position auto tool changer, BT 40 spindle, 14,000 rpm, renishaw probe, thru spindle high pressure coolant, chip conveyor. XYZ axis travels 800 x 510 x 460 mm, table size 1000 x 550 mm. Machine is in excellent condition. Vice and tooling not available.

Condition: used, Year of construction: 2009, operating hours: 4,050 h, Thermoformer Ibjdpozr N U Ejfx Afheb Make: Multivac Model: R245 Built 2009 Low running hours: 4050hrs from New! Ex bakery: used for flexi film on Bagels Lots of spare parts included

Condition: used, Year of construction: 2011, EMCO Concept Mill CM 450 - 3-Axis CNC Milling Machine - Interchangeable WinNC control: Sinumerik 810/840 D / Heidenhain TNC 426/30 - Automatic tool changer - 20-position tool magazine with directional logic - Tool taper air blow-out device - Coolant system - Central lubrication system - Machine light - Operating manual - Operating time: approx. 24,660 hours - Year of manufacture: 2011 Technical data - Machine type: 3-axis CNC milling machine - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Isdpoz Da Haefx Afhjbb - Distance spindle nose–table: 100–600 mm - Table size: 700 × 520 mm - T-slots: 5 × 18 mm, spacing 100 mm - Max. table load: 500 kg - Main spindle: 11 kW (S6–40 %) - Speed range: 50 – 12000 rpm - Max. torque: 83 Nm (S6–40 %) - Tool holder: SK40 / DIN 69871 - Tool magazine: 20 tools - Max. tool diameter: 80 mm with adjacent tool / 125 mm without - Max. tool length: 250 mm - Max. tool weight: 8 kg - Rapid traverse X/Y/Z: 24 m/min - Coolant pump: 2 bar / 40 l/min - Coolant tank: 160 l - Compressed air: min. 6 bar / approx. 150 l/min - Connected load: 16 kVA - Mains connection: 3 × 400 V / 35 A - Footprint (W x H x D): approx. 2040 × 2920 x 2445 mm - Weight: approx. 4000 kg

Year of construction: 2023, condition: used, Opus CNC Olympus 1325 CNC Router, Working Area 1300mm x 2500mm, Gantry Clearance 300mm, Spindle Power 6kw Air Cooled, Collet Type ER32, X, Y, Axis Speed 30,000mm/min, Z Axis Speed 8,000mm/min, Pendant Hand Held Controller, Vacuum Pump (5.5kw x 1 Dual Stage), Twin Bag Extraction Unit, Ovrall Sizes 3220L x 2222W x 2000H, Weight 2100kg. S/No. 10071 (2023) Please Note: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Location: These lots are located in Burton-on-Tent and Birmingham, UK. Please see individual lot for decommissioning, loading information and charges Iodpfxszy Nxas Afhjbb

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,895 h, functionality: fully functional, machine/vehicle number: 121-02396, total height: 2,200 mm, overall weight: 4,000 kg, total length: 2,500 mm, total width: 2,000 mm, input voltage: 400 V, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Drum diameter: approx. 1,450 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 9 A Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,200 mm Ibedpfxszu Ix Us Afhob Total weight: 4,000 kg Operating hours: 9,895 h

Condition: used, Year of construction: 2021, The Smipack DV150 is a fully automatic monobloc overlap shrink wrapper with an inline infeed conveyor. It packs products like glass/PET bottles, cans, jars, and boxes at speeds up to 25 packs per minute using a single film reel system. [1, 2, 3, 4] Key Features Operation Modes: Works with film-only, or with pad/tray configurations depending on exact model variations (like ALX-T or ALX-P). Infeed System: Multi-row inline infeed with an electromechanical oscillating sorter to align products. Film Handling: Single film reel design with optional printed film centering devices. Shrink Tunnel: Built with an efficient double-chamber shrinking setup. [1, 2, 3, 4, 5, 6] Technical Specifications Max Output: Up to 25 packs per minute (ppm) Max Product Height: 380 mm Max Reel Size: 650 x Ø 400 mm Working Pressure: 6 Bar Machine Weight: Approx. 1,682 kg ed linking conveyor into a high-performance double-chamber tunnel for final heat shrinking. Standard Built-In Features Pneumatic Reel Locking: Uses a dedicated reel chuck with convenient built-in rollers to streamline heavy roll replacements. Safety & Control: Equipped with sliding protection doors featuring a deceleration device, manual reel sealers, and a metric-graduation centering system. Sensor Grid: Features a complete array of photocells monitoring product presence, infeed obstruction, film wrapping, and tunnel outlet accumulation. Are you interested in reading about the FLXMOD® control system details, or do you need a list of available optionals like the printed-film centering device? AI responses may include mistakes. Learn more Year of construction: 2019 & 2021 Max speed: 72000 Current size (ml): 3×2 Ibjdjzp A Uaepfx Afhsb Container material: Can, Glass, Pet Max. container: height 170 mm Packaging Type: Film Number of lanes: 8 Max reel size: Ø 500 mm Number of reels: 2 Automatic Changeover: No Compatible Spare Parts: 6 months Dimensions: 17500x1800x2400 mm Power: 182 kW Compressed Air: 6 bar

Condition: good (used), Year of construction: 2014, functionality: fully functional, SYNCROMILL C21-63 OPERATING RANGES Table 1600 mm X 800 mm Travel (X/Y/Z): 700 / 1,000 / 800 mm FEED AXES Speed (X/Y/Z): 75 / 75 / 105 m/min Iodpfx Asvxpuisfhebb Acceleration (X/Y/Z): 11 / 11 / 17 m/s² MACHINING SPINDLES No. of spindles: 2 Spindle spacing: 700 mm Power S1/100%: 26 kW Torque S1/100%: 60 Nm Power S6/40%: 35 kW Torque S6/40%: 80 Nm Max. speed: 17,500 Rpm TOOL INTERFACE HSK 63 TOOL MAGAZINE Chip-to-chip time (VDI 2852): 2.9 s Tool positions: 56 Tools atc Tool length: 530 mm Weight: 9 kg Diameter with fully occupied magazine: 85 mm Diameter with empty positions: 175 mm CONTROLLER / INSTALLATION Siemens 840D SL A-axis: ±180° B-axis: 360° Cooling Blum Touch Probe Rotary table 350 MM Xtra Spindle for heavy works Input power: 95 kVA Installation dimensions (L/W/H): 4.6 / 3.4 / 3.2 m Weight: 25,000 kg Additional Equipment Included: 1 x Rotary Table for advanced multi-axis machining 1 x Touch Probe for precise measurement and quality control 1 x Extra Spindle (ready-to-install for maximum uptime) Ready For Delivery. Increased productivity with two spindles operating simultaneously High flexibility for complex parts and multi-side machining Equipped with additional accessories to maximize machine versatility and reduce downtime

Condition: good (used), Year of construction: 2011, spindle diameter: 40 mm, number of spindles: 7, Weinig Unimat 500 Year of manufacture: 2011 Planing width: 230 mm Planing height: 120 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Number of rollers in the table: 2, driven with 150 mm width Feed rate: 5 - 30 m/min Feed motor: 5 kW Memory function: 3 sets of radially CNC-controlled adjustments for spindles 3, 5, and 6 Spindle arrangement: Ijdjzzv Abopfx Afhebb Bottom: 7.5 kW Right: Left: 7.5 kW Right: 5.5 kW Top: 7.5 kW Top: 7.5 kW Bottom: 11 kW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of rollers: 3 Number of driven rollers: 2 Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of top roller: 140 mm Diameter of bottom rollers: 140 mm MACHINE DETAILS Drive: Hydraulic Control: Conventional Power: 3 kW Dimensions & Weight Isdpszza U Ujfx Afhebb Dimensions (L x W x H): 2,900 x 900 x 1,400 mm Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT CE marking

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Ibsdpfoxr N Rmsx Afhsb Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 83,422 h, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 820 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,600 mm, table width: 630 mm, table load: 850 kg, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,000 W, number of slots in tool magazine: 24, swivel angle A-axis (max.): 150 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KOVOSVIT MAS MCU 630V-5X was manufactured in 2011. It features a HEIDENHAIN iTNC 530 control, a spindle speed of up to 12,000 min⁻¹, and a maximum torque of 157/215 Nm. The machine supports a table load of 850 kg and includes options like cooling through the spindle and a Probe OPM40. Ideal for complex machining tasks, the KOVOSVIT MAS MCU 630V-5X vertical machining centre we have for sale. For more information about this vertical machining centre, please reach out to us. Machine Benefits Qualitative Machine Benefits • Perfect condition • Full documentation available including service history Technical Machine Benefits • Rapid traverse x, y, z: 60 m/min • Acceleration x, y, z: 6. 5 m/s² Ijdpfozv N Iaox Afhobb Dimensions Machine Depth 4200 mm Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,574 h, punching force: 20 t, total height: 2,082 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, overall weight: 13,000 kg, controller manufacturer: AMADA, controller model: AMNC-F, product length (max.): 4,165 mm, This AMADA AC2510 NT + MP 250 was manufactured in 2009. It features a 51-station turret and can handle sheet sizes up to 1270 × 5000 mm, with a maximum thickness of 3.2 mm for mild steel. The machine includes a loading system MP 250, enhancing its efficiency. Consider the opportunity to buy this AMADA AC2510 NT + MP 250 CNC punching machine. Contact us for more information. • Turret type: 51-station turret • Maximum workpiece size: 1270 × 5000 mm • Maximum sheet thickness: 3.2 mm (mild steel) • Maximum sheet weight: 50 kg (feed speed F1); 150 kg (feed speed F4) • Position deviation: ±0.1 mm • Strokes per minute: Punching (5 mm pitch, X-axis) 350; Nibbling (5 mm pitch, Y-axis) 260 • Maximum stroke length: 42 mm • Maximum feed speed: X 80 m/min; Y 60 m/min Iedoz Apf Eepfx Afhebb • Turret indexing speed: 30 per minute • Electrical connection power: 19 kVA • Compressed air consumption: 500 l/min • Operating air pressure: 5 bar Additional equipment • Loading system MP 250 included

Condition: excellent (used), Year of construction: 2007, Akbend ASM140 Bending Rolls 3 Rolls Ibedpozxtbvjfx Afheb 140mm top roll 1250mm length x 5mm thickness Year 2007 Motor power 2.2kw