Used Rogi Radial Drilling Machine for sale (65,467)

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 horizontal adjustment of the boring slide: 700 mm vertical adjustment of arm: 600 (motorisch) mm swivel range of the arm: 90° rechts/links Grad distance table - lower edge spindle: min./max.: 200 / 1120 mm spindle taper MT: 4 bore spindle stroke: 420 (manuell-automatisch) mm range of revolutions per minute - continous: 20 - 2000 / 3 step U/min feed: 01, / 0,2 / 0,3 / 0,4 / 0,8 / 1,2 mm/U column diameter: 250 mm base plate surface area: 1100 x 600 mm total power requirement: 4,6 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,8 x 0,8 x 2,5 m Tool ejection via expulsion wedge Pedpfx Agsvhbpqe Tegn Equipment: Coolant system with pump (without feed) Drill cube L: 760 x W: 500 x H: 510mm / horizontal surface 760 x 500mm and vertical surface 760 x 510mm Machine ilumination *

Condition: used, Year of construction: 1960, Technical details: workpiece height max.: 600 mm Arm length: ca. 700 mm bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm Pgjdpfox Afn Nsx Ag Tsn

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps Pedpfx Asu T Ty Hsg Tegn - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, Radial drilling machine with table WEBO type HRH 100 / 3000 Machine No. 10009555/7 -- 1110185 -- 6046 -- Year of manufacture 1979 Drilling capacity: Ø 100 mm in ST 60 at a feed rate of 0.5 mm/rev. Nominal overhang: 3000 mm Maximum overhang: max. 3100 mm Spindle mount: MK 6 Spindle speed: 22.4 - 1600 rpm, 36 steps Feed rate: 0.05 - 2.5 mm/rev, 18 steps Distance spindle - baseplate: 970 - 2335 mm Quill stroke: 325 mm Swivel range of the arm: 360° Traverseable on bed, bed length: 7500 mm Clamping area of the table: 8000 x 2100 mm - Electric central clamping device - Drilling unit on the machine bed, traversable lengthwise by electric motor - Table consisting of 2 clamping plates with 7 x T-slot, (length 4000 x width 2100 x plate thickness 360 mm) Pgedpofbt Huefx Ag Tsn Space requirement L x W x H: 8000 x 4550 x 4300 mm Maximum height: 4300 mm Transport height (bed with drilling machine): approx. 3150 mm Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions table: L x W x H 4000 x 2100 x 900 mm (2 plates stacked on top of each other) Transport weight table: approx. 14 tons Good condition

Condition: new, Main Motor Power: 5.5 KW, 380 V Operating Type: Hydraulic Operating Type: Geared Coolant Pump Power: 90 W Drilling Capacity: 63 mm Spindle Taper: MK5 Spindle Stroke (Spindle Travel): 400 mm Pgsdpfxey T H S He Ag Tsn Spindle-Column Distance: 450-2050 mm Spindle-Table Distance: 400-1600 mm Column Diameter: 450 mm Speed: 20-1600 rpm Number of Steps: 16 Table Size: 950x630x500 mm Spindle Feed: 0.04-3.2 mm/rev (16 steps) Machine Size: 2900x1250x2500 mm Dimensions (L x W x H): 3110x1250x3150 mm Net Weight: 6800 kg Gross Weight: 7150 kg

Condition: new, Radial drilling machine with hydraulic clamping and thread cutting device. Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Podpfxsuxrtfj Ag Tegn Thread cutting steel Ø: 40 mm Thread cutting cast iron Ø: 50 mm Diameter of the column: 320 mm Projection (min/max): 330 - 1650 mm Travel of the spindle head (horizontal): 1320 mm Distance spindle nose - base plate (min/max): 465 - 1405 mm Travel height of the cantilever: 670 mm Clamping surface cube table: 630 x 500 x 500 mm Base plate size: 2550 x 970 x 200 mm Spindle holder: MK 5 Spindle stroke: 270 mm Speeds: (12) 37 - 1253 1/min Feed rates: (3) 0.06 / 0.10 / 0.20 mm/rev Motor power, approx.: 3.7 kW Max. total height: 2790 mm Weight, approx.: 3300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping - A special lifting safety device prevents the arm from dropping abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury, even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard equipment: - Tapping device - Coolant device incl. pump - Machine light - Cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - Protective device for spindle - CE

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. Pedpfxsp Atipo Ag Togn - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Condition: excellent (used), machine/vehicle number: M100037, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 45 mm, spindle mount: MK 4, drilling depth: 250 mm, height adjustment type: mechanical, actuation type: mechanical, rotational speed (max.): 2,650 rpm, rotational speed (min.): 30 rpm, total width: 900 mm, total length: 1,900 mm, total height: 2,200 mm, table width: 760 mm, table length: 1,120 mm, overall weight: 1,800 kg, year of last overhaul: 2026, Equipment: CE marking, CARIMATI CTU 40/45 x 1000 radial drill press in excellent overall condition, fully functional machine, tested and ready for use. Key features: drilling capacity 45 mm Morse taper MK4 spindle speed 30 – 2650 rpm automatic feeds 0.05 – 0.3 mm/rev spindle stroke 250 mm table stroke on column 1000 mm power supply 400V three-phase complete with chuck, vise, and quick-change chuck column and head locking coolant system machine complies with CE standards Transportation is the responsibility of the buyer. Psdpszdqklofx Ag Togn Loading onto the truck will be carried out by us. If customized/tailor-made packaging is required for transport, the related cost will be borne by the buyer. Machine sold as is, with no warranty.

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance: - Spindle bottom edge: min. mm 140 - Table top edge: max. mm 740 Boring radius: - min. mm 540 - max. mm 1590 Travel range U-axis: mm 2600 Travel range Y-axis: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling performance in solid material: - St 60: mm 40 - GG 22: mm 50 Thread cutting: - St 60: M 36 - GG 22: M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque: Nm max. 250 Constant from: min-1 15 - 200 Podpoy Ttrtefx Ag Togn Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, infinitely variable: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positional accuracy X, Y axis at 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positional accuracy Z axis: mm ± 0.05 Repeatability Z axis: mm ± 0.03 Positional accuracy W axis: mm ± 0.05 Repeatability W axis: mm ± 0.03 Electrical data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible in each cycle Chip breaking / chip removal: possible in drilling cycle Drilling patterns: Hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero-point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning cast and sintered parts - Angle detection for round parts by probing the reference edges or surfaces Data interfaces Paint finish with signs of use Standard paint finish, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test report for mechanics, electrical system and safety devices

Condition: good (used), Year of construction: 1978, machine/vehicle number: 973, Offer 26099 Technical data: - Drilling capacity in steel ST 60: 32 mm - Drilling capacity for step drilling: 40 mm - Thread cutting device - Drill spindle mount: MK 3 - Drill spindle stroke: 200 mm - Outreach min / max: 250 / 1000 mm - Stroke of the arm: 600 mm - Min. / max. distance: - Spindle - base plate approx.: 650 - 1250 mm - Processed base plate clamping surface: B 1150 - 700 mm - 12 spindle speeds: 56 - 1220 rpm - 4 feed rates: 0.15 - 0.30 mm/rev - Drill spindle drive: 400 V / 3.5 kW - Square table - Space requirement approx.: W 1700 x H 1960 + 500 x D 700 mm - Weight approx.: 1200 kg Psdpfsy U Htajx Ag Togn

Condition: ready for operation (used), Year of construction: 1995, Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Clamping area of the table: 600 x 1800 mm Height adjustment of the boom: 450 mm Min./max. drilling radius: 305/1305 mm Spindle taper: SK 40 Quill stroke: 200 mm Infinitely variable spindle speeds: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency controlled: 5.5 kW Electrical connection: 400 V, 14 kVA Pgodpfx Aoy I Ua Ieg Ton Weight: 3400 kg Space required: 3800 x 2000 x 2500 mm

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 45 mm arm length 325 / 1000 mm workpiece height max. ca. 1000 mm spindle taper MT 4 spindle turning speed range 40 - 1700 U/min Pgodjvh Nb Ijpfx Ag Tjn feeds 0,125 - 1,25 mm/U distance spindle/base plate 385 / 1400 mm quill stroke 325 mm crossrail adjustment vertical 700 mm 360 ° boring head horiz. adjustable 675 mm base plate surface area 1300 x 800 mm total power requirement 6,2 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 2,30 x 0,98 x 2,82 m - autom. feed - right-/left spindle run Accessories: box table 1000 x 750 x 500 mm, hydr. vice, width of jaws 200 mm, coolant

Condition: used, Year of construction: 1980, bore capacity in steel (diameter) 50 mm arm length 1250 mm distance spindle/base plate 1350 mm bore capacity in cast iron 60 mm spindle taper MK 5 Pgsdpfxjvh Nbze Ag Tsn spindle turning speed range 12,5 - 1000 U/min feeds 0,06 - 0,5 mm/U crossrail adjustment vertical 620 mm column diameter 350 mm total power requirement 7,7 kW weight of the machine ca. 4,6 t dimensions of machine L x W x H 2,53 x 1,15 x 2,82 m Accessories: swivelling box table, coolant - additional column guide at the end of arm -

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 50 mm arm length 1100 mm workpiece height max. ca. 1000 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 28 - 2500 U/min feeds 0,05 - 2 mm/U quill stroke 300 mm distance basic plate - spindle nose 630 - 1380 mm crossrail adjustment vertical 750 mm total power requirement 6 kW weight of the machine ca. 4 t dimensions of machine L x W x H 2,74 x 1,14 x 2,59 mm - with thread cutting attachment - Pgsdpfsu Sblwsx Ag Ten Accessories: box table 550 x 550 x 550 mm, vice, coolant

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 50 mm arm length 1250 mm workpiece height max. ca. 1150 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 25 - 2000 U/min feeds 0,06 - 0,5 mm/U crossrail adjustment vertical 620 mm column diameter 350 mm total power requirement 7,5 kW Podpfx Ajvh Nbheg Tegn weight of the machine ca. 4,6 t dimensions of machine L x W x H 2,50 x 1,08 x 2,50 m Accessories: box table 1100 x 700 x 550 mm, coolant pump

Condition: used, bore capacity in steel (diameter) 120 mm arm length 2500 mm workpiece height max. ca. 1800 mm bore capacity in cast iron 160 mm drilling radial min./max. 880 / 2825 mm throat min. 555 mm column diameter 650 mm bore spindle diameter /taper 90 / MK 6 mm diameter of quill 160 mm bore spindle turning speed range 10 - 660 U/min bore depth 650 mm feeds 0,07 - 3,0 mm/U distance spindle/base plate min. 300 / max. 2100 mm vertical adjustment of the arm 1150 mm base plate surface area 3000 x 1550 mm total height of machine 4500 mm total power requirement 15 kW Pjdpovh Ncxjfx Ag Togn weight of the machine ca. 16 t - right-/left spindle run - thread cutting device Accessories: DRO HEIDENHAIN on X-and Z-axis (arm and boring depth)

Condition: excellent (used), Rapid radial drilling machine / Radial drilling machine / Drilling machine (used) Manufacturer: Mikrosa Year of manufacture: 2001 Type: SRB 35 Drilling capacity: - Steel: 35 mm - Cast iron: 40 mm Thread cutting: - Steel: M20 - Cast iron: M24 Spindle taper: MK 4 Spindle speed: 20 – 2800 rpm, infinitely variable Automatic feed: infinitely variable Spindle stroke: 140 mm Arm reach: 1000 mm Table size: 1050 x 400 mm Column diameter: 200 mm Installation height: 600 mm Connected load: 7.8 kW Space requirement: approx. width 1250 mm, depth 2100 mm, max. height 2700 mm Pgjdpfx Agey Skrze Ton Weight: approx. 2000 kg Hydraulic clamping Thread cutting device Depth stop Lateral clamping surface Drill chuck 2 gearbox stages The machine is in very well-maintained condition, runs very smoothly, and is ready for immediate operation. Forklift available, free loading on truck. Affordable shipping possible. Location of the machine: 48477 Hörstel

Condition: ready for operation (used), DONAU DR 23 - High-speed radial drilling machine Psdpfxey Uv Tvs Ag Togn - Drilling capacity / steel approx. 28 mm - Arm length 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Subject to errors and omissions.

Condition: good (used), Hello, For sale: RF-50/1250 radial drilling machine. The machine is in working condition, currently in continuous operation, and can be inspected and tested on site. The price listed in the advertisement is net and VAT must be added. Pedoxykctspfx Ag Togn The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Condition: excellent (used), Caser radial drill mod. F50-1250 complete with cube Pgsdjv Hngmjpfx Ag Ten

Condition: repair required (used), bore capacity in steel diameter / mm arm length 1000 mm Pedpovmtlhsfx Ag Tjgn workpiece height max / mm - throat (max) 1000 mm - sleeve stroke 250 mm MILLING SPINDLE / HEAD / - spindle revolutions (min) 47.5 /min - spindle revolutions (max) 2120 /min - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm - total weight approx. 2500 kg Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 65 mm arm length 1600 mm workpiece height max. 1600 mm surface area 1800x800 mm Pgodpfxey Tplvs Ag Ten turning speeds 18-1800 U/min Feed -2,54 mm/U The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Drilling capacity cast iron / steel ----- 31.5 / 25 mm Tapping capacity cast iron / steel ----- 20 / 16 mm Speed range ----- (8) 100 ~ 1600 rpm Spindle stroke ----- 135 mm Unload ----- 300 ~ 720 mm Podpfxeq E Izms Ag Tjgn Spindle intake ----- MK3 Spindle feed ----- 0.08 / 0.14 / 0.22 mm/omw Cube table----- 250 x 250 x 250 mm Column diameter ----- 150 mm Foot ----- 1200 x 620 mm Maximum distance spindle - base ----- 275 ~ 680 mm Motor ----- 1.1 KW Voltage ----- 400V / 3 Phase Weight ----- 580 KG INCLUDING * Cooling system * CE plug * SCHNEIDER electrics OPTION * Floor cabinet

Condition: used, y-axis 1.000 mm table dimensions 1.000 x 600 mm bore depth 150 mm Podpfxsy A Tc De Ag Tjgn bore diameter 32 mm spindle tunring speed 30 - 2.650 U/min output 6 kw In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: Pjdjy Ed I Ajpfx Ag Togn - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.