Used Rovema Tube Bagging Machine for sale (65,957)

Condition: like new (used), Year of construction: 2022, operating hours: 170 h, functionality: fully functional, machine/vehicle number: 156-600, total height: 2,920 mm, total width: 1,480 mm, total length: 2,600 mm, type of input current: AC, overall weight: 2,500 kg, film width: 100 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (min.): 50 mm, product height (max.): 110 mm, product width (max.): 50 mm, product length (min.): 50 mm, product width (min.): 50 mm, product length (max.): 110 mm, nominal power (apparent): 8 kVA, filling weight (min.): 5 g, filling weight (max.): 20 g, air demand: 0.4 m³/h, input current: 12 A, roll diameter: 76 mm, Equipment: documentation/manual, safety light barrier, The FlexiBag Bi 260 was acquired as a test machine for processing polymer-bound phase change granules. All specifications regarding packaging width, package weights, and output rates refer to polymer granules with a bulk density of 550 kg/m³ and a density of 860 kg/m³. In principle, the machine can be used for all types of granulates, powders, etc. For dosing, a BW211 Micro belt weigher from DOWATEC is installed. This enables very precise dosing. Thanks to two dosing belts, a high productivity of 30 cycles per minute can be achieved by the packaging machine. The FlexiBag Bi 260 is suitable for impulse and heat-sealable films as well as nonwovens. The packaging machine has only been used as a test machine and has a low total operating time of 170 hours. Ncodpfx Adjyi Eqxjter

Condition: used, Year of construction: 1979, Roundo plate/pipe roller. In recent years, it has primarily been used for rolling smoke pipes with a diameter of 150–160 mm. Four pallets with rollers are included; they are used to determine the pipe diameter. Using a pneumatic cylinder, the end is opened to remove the rolled pipe. I have tested the machine, but the rollers do not run. There is probably a simple solution for this. Machine and rollers weigh approximately 3–4 tons. Ncedpoyvqc Uofx Adtsr

Condition: ready for operation (used), Year of construction: 1994, A Stiegler side weld bag-making machine in need of repair is available. Working width: 1000mm, film material: PE/PP, feed range: 80mm-600mm, max. clearance: 900mm, film width range: 200mm-1380mm, film thickness range: 0.025mm-0.085mm, output: 160cycles/min, max. C-fold triangle: 1380mm. Including bottom gusset device, hot stamping units, thermal transfer units, ribbon unwinding unit, unwinding station and various accessories. The control system of the line must be renewed. Documentation available. An on-site inspection is possible. Nsdpfx Adoyx H H Uetocr

Condition: good (used), Year of construction: 1985, functionality: limited functionality, Filling and Packaging Machine Manufacturer: Volpak Model S130D Volpak S-130-D three-side seal pouch machine for powders and granulates, Duplex operation Njdpfx Aey Ah Rpsdtecr Includes two agitator hoppers and screw feeder Hot foil coder. Pouch sizes from 50 x 50mm up to 130 x 200mm. Output up to 80 pouches per minute (duplex operation) Very well-suited for food products Technical specifications in the images Includes many spare and wear parts Includes original documentation (German + English)

Condition: ready for operation (used), Year of construction: 2005, - USED - TUBE BENDING MACHINE AXIS: 3 MAX TUBE DIAMETER: 30X2 mm Ncsdpfxevhc Uus Adtsr WORKING LENGHT: 3000 mm X-AXIS POSITIONING SPEED: 900 mm/sec Y-AXIS BENDING SPEED: 200 °/sec Z-AXIS ROTATION SPEED: 360 °/sec MAX BENDING RADIUS: 20 A 170 mm CONTROL UNIT: DNC800

Condition: ready for operation (used), Year of construction: 2007, A vertical high-performance flow wrapping machine Robert Bosch is available. Format range: 360mm, packaging capacity: 80bags/min. An on-site inspection is possible. Expected to be available June 2026. Nsdpeyxratefx Adtjcr

Condition: good (used), functionality: fully functional, Year of construction: 1998, bending radius (max.): 600 mm, mandrel length: 1,200 mm, wall thickness: 8 mm, Transfluid DB 40100ST Mandrel bending machine Tube bending machine The above machine is a mandrel bending machine designed exclusively for the production of tubes and profiles with an outer diameter of 40-100 mm, max. 110x5 mm with a max. wall thickness of 8 mm or for the processing of solid materials with an outer diameter of up to 70 mm. Pipe push-on length/usable length: 1200 mm Radius range max:600 mm Bending height:1200 mm Machine data Length:4000 mm Ncjdper H Havsfx Adtsr Width:2600 mm Height:1400 mm Weight:9000 kg

Condition: reconditioned (used), functionality: fully functional, Löser RP+S374-1, centerless tube grinding machine, cylindrical grinding machine, wet grinding, wet machining Belt grinding station: one Grinding belt: 150 x 2500 mm Contact wheel: 150 x 400 mm Belt tension: pneumatic Wheel drive: 5.5 kW Part feed: 0 - 8 m/min Part diameter: 10 - 100 mm Part length: 60 - .....mm Working direction: from right to left Ncodpeyxdglefx Adtjr

Condition: good (used), functionality: fully functional, Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Nsdpfx Adsytpimotocr Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants Ncodpoytfyzsfx Adtsr - Operating manual

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 E Fully automatic drilling machine, measuring length 6000mm (2-axis NC drilling machine) Ncedpfsfu Irzjx Adter Item No. 6019 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X and Y values ​​or calling up a program that has already been written, the machine works completely independently. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 2-axis control incl. LAN interface for data transmission Pneumatic vice (span 200 mm) Alternatively also available with 300 mm. Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV Alternatively also with Unimax 4 Basic (For technical data see data sheet) anti-rotation device tapping device motorized height adjustment NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile as dirt protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / Mounting bracket / roll width 407 mm / insert plates / struts Roller diameter 50 mm / steel rollers It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00 Ncodpjyvhl Hsfx Adter

Condition: new, Year of construction: 2026, SEMI-AUTOMATIC DRILLING RIG “UNIBORFIX 50” With the UniBohrFix 50 drilling system, all profiles can be machined against a stop or with grippers. The Drilling is done manually using the lever, with the materials on the X-axis automatically pointing to the drive to the next drilling position. Easily drill entire programs or work with the stop plate quickly carry out individual drillings. The system is suitable for weights up to 100 kg. The facility also contains a minimum quantity spray unit with holder and spray can. The technical data of the standard version can be found in the table. If necessary, all components of the system can be adapted to your requirements. You can choose between different drilling machines, roller conveyors, select positioning systems and vices. Plantec configures the system so that it suits you perfectly! ADVANTAGES A sequence of holes is automatically executed at precise intervals. Potential operator errors are drastically reduced. Programming takes just a few minutes. Very good value for money. Significant reduction in manpower. Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 2 T Spindle MK2 Nodpfogwt Slsx Adtjcr Continuous drilling capacity 18 mm Speed ​​ranges: 100-2000rpm, 200-4000rpm Projection 225 mm Spindle/table distance 60-400 mm Adjustable vice with measuring linear display Positioning length stop: PD-100e control for automatic positioning Positioning: absolute or chain dimensions Easy to read LED display Trolley with DC servo motor Positioning accuracy +/- 0.1 mm/m Attachment arm with spring damping Stop plate with groove Memory control with 3,000 memory options Roller conveyors: RD-200/3 load capacity 200 kg/m Roll width 290 mm Roll diameter 40 / 50 mm insert sheets Struts for stabilization switch cabinet Available options: Minimum quantity spray system with spray head and holder Gripper tongs for clamping the material on the stop plate

Condition: good (used), functionality: fully functional, We offer for sale 2 units of SOCO DEF FA 85 tube end forming machines. These machines are designed for processing tube and profile ends and are suitable for serial production. They are robust and reliable devices from the renowned manufacturer SOCO. Technical specifications: Tube diameter: 25–85 mm Workpiece length: 25–320 mm Type: automatic tube end forming machine Quantity: 2 units Condition: Used, functional. Test runs can be arranged under working conditions. Advantages: Proven SOCO brand Easy operation Suitable for serial production Ncedpfjy A R Ahox Adtor Discount possible when purchasing both machines

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, pipe diameter (max.): 127 mm, bending angle (max.): 182 °, bending radius (max.): 400 mm, mandrel length: 4,000 mm, overall weight: 16,000 kg, total length: 7,000 mm, total width: 2,200 mm, total height: 1,800 mm, input voltage: 400 V, type of input current: three-phase, feed length Z-axis: 4,000 mm, wall thickness: 5 mm, Equipment: documentation/manual, Capacity, Ø mm / 127 x 5 Radius, min./max. / 50/400 Bending speed/repeatability / 40º/s. ±0,1° Nedpfx Aou Rf E Eedtecr Mandrel length 4 000 Weight, kg 16 000 Motor kW / 40 Length feed 900 mm/sec Degree of tolerance 0.05-0.1°/mm Tools: 63 mm

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used tube bending machine from Jutec Type: 5000 Capacity: up to approx. 40 mm Mandrel length: 4500 mm CNC controlled Automatic head Nedpfxjyfmwxe Adtscr Manually rotatable head with hydraulic clamping Incl. 3 sets of tools Year of manufacture: 2009 Very little used

Condition: new, The KPB 81, a robust Tube and Profile Rolling Machine, excels in high-performance bending, combining modern mechanical engineering with powerful hydraulics. This advanced machine allows you to bend medium and heavy steel profiles with remarkable precision, making it ideal for various applications in metal construction, locksmithing, and mechanical engineering. Equipped with three motor-driven rollers, hardened and ground shafts, and an overload slip-clutch, the KPB 81 ensures efficiency and safety. The modular roller system provides optimum adaptability for bending a wide range of profiles, while the hydraulically adjustable bending rollers enhance versatility, allowing for both horizontal and vertical machining. Standard equipment includes a digital display, control panel, and operator manual for intuitive operation. To experience the precision and performance of the KPB 81 in the Tube and Profile Rolling Machines category, you can request a quote today. Ncjdpfx Asn Upglsdter

Condition: excellent (used), Year of construction: 2008, Description to follow! Nedpfjyrhmbjx Adtocr

Condition: used, The RGM 3, a top-tier Tube End Finishing Machine from KNUTH, is designed for precision and efficiency in tube processing. Its rigid construction and small footprint make it an ideal choice for any workshop looking to optimize space without sacrificing performance. The machine features a jaw chuck at the front and a clamping chuck at the rear, allowing for versatile operations. Additionally, it comes equipped with a tube cutter and an inside deburrer, ensuring clean and accurate finishes on all types of tubing. With the inclusion of a mobile base, the RGM 3 offers easy maneuverability, enhancing its usability. Whether you need to perform intricate tube work or handle larger projects, this highly robust machine is built for the task. Don't miss out on the opportunity to enhance your tube and profile processing capabilities; order online today to bring the RGM 3 to your workshop. Nedpsuxc Rhefx Adtocr

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) - positioning accuracy +/- 0,2mm - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm - display speed on touch panel - illumination drilling unit - integrated tool cabinet Ncodpfolgvkijx Adtsr - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Nedpsd E A I Iofx Adtjcr Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: used, Brush deburring machine, tube deburring machine ERINI type 250 Year of construction approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2,2 / 2,8 kW Njdpspu R Ngjfx Adtecr Mains connection 380 Volt, 50 Hz - Material support - New deburring brush - Suction connection Ø 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition

Condition: repair required (used), functionality: not functional, Year of construction: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC: PC control Beckhoff Technical Specifications: - Maximum tube diameter x wall thickness: 80 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius (to tube centre): 25 mm - Maximum bending radius (to tube centre): 240 + 50 mm - Maximum bending angle: 180° - Maximum tube lift length: 1000 mm - Bending direction: right - Machine weight: 7000 kg - Total installed power: 39 kW Ncsdpfxoxzubvs Adtjr - Voltage: 400 V / 50 Hz - Amperage: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed for slide rails - Automatic tube feed and rotation device - Electric mandrel bending device - Pneumatic mandrel rod safety device - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety guard Machine requires repair: The planetary gearbox of the transport trolley is defective and must be replaced. Spare parts costs according to offer: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT Without installation. Cheap sale in current condition – sale as is. Immediately available, free loading onto truck included.

Condition: like new (used), Year of construction: 2020, Maximum product dimensions (width) 400 mm Maximum product dimensions (height) 240 mm Maximum product dimensions (length) ∞ Ncsdpfx Asyrm Ecodtor Maximum coil dimensions (Ø x length) 350x700mm Infeed belt height 870 mm (with rollers) 830-910 mm (with feet) Machine dimensions (safety guards open) 2893x1340x1558 mm Machine dimensions (safety guards closed) 2893x1820x1980 mm Hourly production 3600 p/h The PRATIKA 56 MPS X2 is a servo-assisted automatic shrink wrapping machine, equipped as standard with the Side Seal device, a continuous seal with no length limitation, as well as Center Sealing and fully electric operation. This machine, suitable for packaging formats up to 400 mm wide and 240 mm high, has been improved in all mechanical and electronic components to achieve a production rate of up to 3600 pieces per hour (depending on product dimensions and the film used).

Condition: like new (used), The CS-Matic 100 is offered together with the matching infeed conveyor (Audion ACC2000/4, year of manufacture 2021). The machine runs fully electric—no pneumatics, no compressed air required—making it exceptionally quiet in operation. Packaging capacity: up to 4,200 packs per hour (depending on product size, package configuration, and film type) Conveyor speed: 10 – 30 m/min Maximum package height: 200 mm Maximum package width: 400 mm Maximum package weight: 30 kg Sealing length: 500 mm Maximum film size: 600 mm (center-folded – ø 350 mm) Compatible films: Polyolefin (up to 30µ), Polyethylene (from 15 to 80µ with optional PE sealing bar) Machine dimensions (L x W x H): 2,170 x 1,875 x 1,665 mm Machine weight: 715 kg - Automatic centering seal adjustment - Automatic control of sealing bar height - User-friendly LCD control panel, 7" color touchscreen - Storage and retrieval of process statistics (counters, package length measurements, real-time output, machine performance, irregular pack detection) Nsdpfx Adjyrm D Ejtscr - Electronically adjustable conveyor speed - Single pack/multi-pack mode - Continuous, fully electric 4.0 packer with 2 belts - Cross sealing bar with PTFE-coated sealing blade, controlled via inverter and encoder - Faulty package detection - Inverter and encoder controlled This system allows all operations to be managed simply and precisely. - Power and control section - Electronically controlled conveyor speed - Reduced power consumption