Used Rwm 1000 for sale (8,509)

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Ljdpfx Aei Uli Esl Neac

Condition: excellent (used), Year of construction: 2014, Rarely available for sale, GEA Comas Tartomatic 1000 in beautiful condition. Has not been used very much. Comes with many accessories as shown in the photographs. Ledpevd Elnjfx Al Noac

Condition: not inspected (used), Well maintained 7m x 1000mm thermal oil fryer, direct from closed poultry factory where it was frying chicken burgers and nuggets. Complete with top hold down belt. The hoists to lift the canopy have been lost by the storage company so these will need to be remanufactured. Machine was in lovely condition prior to being removed from the factory when it closed in 2016. Laedpfx Ajht T Ilol Njc

Condition: not inspected (used), 3m x 1000mm thermal oil fryer, direct from closed snack food factory where it was frying samosas and onion bhaajis. Complete with top hold down belt and teflon infeed. Machine was removed from the factory when it closed in 2015 and has been in storage ever since. Ljdpfx Aljh Uhams Noac

Condition: excellent (used), Year of construction: 2018, Syspal tote bin tumbler in almost as new condition. Bought new in 2019 and only used for a short time. Lasdpfxsvyq Srj Al Njc

Condition: used, Year of construction: 1978, x-travel 1.000 mm y-travel 340 mm z-travel 450 mm Lajdpozf Nrdefx Al Nsc table: 1.300 x 400 mm spindle taper ISO 40 SK turning speeds 32 - 1.400 U/min spindle stroke 80 mm total power requirement 7,5 kW Features: - Universal console milling machine with HEIDENHAIN digital display - Mechanical tool clamping - Cooling system - Various SK 40 tool holders - Machine documentation in German

Year of construction: 2026, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter Lsdpfx Aouia Dqsl Nsac and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: good (used), Year of construction: 2016, Riggs 1000 Twin head depositor 2016, Stainless frame, twin head depositor, one head fills from 50ml to 600ml and the other from 125ml to 1200ml, on mobile scissor lift table Lajdjy Umxpspfx Al Nec

Condition: excellent (used), Weiss Type: WT3-1000/40 Weiss temperature test chamber with S!MCON / 32 control system, water-cooled Control panel: “Touch panel” The “Touch panel” control panel allows all control and operating commands to be executed simply by touching the function symbols. Adjustable feet To compensate for unevenness in the floor and to ensure sufficient ventilation of the machine, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be placed in the test chamber. Feedthrough installed as standard R1: 125 mm L1: 50 mm Test chamber volume: approx. 990 liters Test chamber dimensions: height 950 mm, width 1100 mm, depth 950 mm External dimensions: height 2000 mm, width 1415 mm, depth 2105 mm Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 4500 W Data for operation: Test chamber lighting: halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 22.0 A, rated power 11.5 kW Fuse on customer side: 32 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front, 1 m height: 56 dB(A) Refrigerant: R-404A Weight: 840 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Ljdezgbt Nopfx Al Nsac Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Weiss Type: WK1-1000/70 Weiss Climate Testing Chamber, Water-Cooled (Refrigerant converted to R-452A) Control panel: "Touchpanel" All control and operating commands can be initiated on the "Touchpanel" by simply touching the function symbols. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be placed in the test chamber. Feedthroughs: 1 feedthrough, diameter 125 mm, installed on the right 1 feedthrough, diameter 50 mm, installed on the left Volume: 990 liters Test chamber dimensions: Test chamber: width 1100 mm, depth 950 mm, height 950 mm Housing: width 1385 mm, depth 1850 mm, height 1980 mm Data for temperature tests: Minimum temperature: -70 °C Maximum temperature: +180 °C Temperature deviation, over time: ± 0.1 to ± 0.5 K Temperature homogeneity, spatially: ± 0.5 to ± 2 K Temperature change rate, heating: 4 K/min Temperature change rate, cooling: 2.5 K/min Maximum heat compensation: 2750 W Data for climate tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatially: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Data for operation: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 29A, rated power: 19.8 kW Refrigerant: R-452A / R23 Weight: approx. 910 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components Lsdpfezgbtpex Al Njac 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: defective spare-parts repository (used), Vickers Type: HVS 1000 The digital micro-Vickers hardness tester HVS 1000 features a unique and precise design in the areas of mechanics, optics, and light source, and is capable of producing a clearer image of the impression, thus enabling more accurate measurements. Main purpose and scope of application: 1. Iron and steel, non-ferrous metals, metal foils, hard alloys, sheet metal, microstructures 2. Carburized, nitrided, and decarburized layers, surface hardening layers, plating, coatings 3. Glass, wafers, ceramic materials Specifications: Model HVS1000 Type Digital Micro Hardness Tester Test forces (N) 0.098 / 0.246 / 0.49 / 0.98 / 1.96 / 2.94 / 4.90 / 9.80 Ljdpfx Aezgbr Sel Nsac Test forces (Kgf) 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 Load control Automatic loading and unloading Objective-indenter turret Manual Dwell time (s) 0~60 Microscope magnification x 400x for measurement, objective 40x, eyepiece 10x 100x for observation, objective 10x, eyepiece 10x Micrometer resolution (μm) 0.01 Test range 5 HV~3000 HV Dimensions of XY test table 100X100 mm Travel range of XY test table 25X25 mm Max. sample height 120mm Max. sample width 110mm Hardness conversion HK, HRA, HRB, HRC, HRD, HR15N, HR30N, HR45N, R15T, HR30T, HR45T, HV, HBW Output Built-in printer, RS232 interface Power 220V, 60/50Hz Dimensions (mm) 441 x 270 x 480 Net weight / kg) 35 Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and information!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS cabinet series is structured as follows: e.g., Type TSR-30/1000 1) T means: Temperature 2) S means: Stress Screening 3) R means: External Conditioning 4) -30 means: Lower temperature -30 °C 5) 1000 means: 1000 liters test chamber volume Technical performance data: A) TSR-30/1000 base unit without hose connections, Lajdpszgbntjfx Al Nec i.e., for use as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ±0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation, and without additional equipment. Air volume flow rate approx. 2000 m³/h B) TSR-30/1000 base unit with hose connections, for connection to an on-site external test chamber Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K over time Average temperature change rate, measured with the circuit short-circuited Heating 4.0 K/min Cooling 4.0 K/min in the range of +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation, and without additional equipment, measured with the circuit short-circuited Caution: The on-site external test chamber must be absolutely sealed and appropriately insulated; any penetrations must be optimally sealed on-site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions height 900 mm width 1000 mm depth 1100 mm External dimensions height 1950 mm width 1270 mm depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, hermetically sealed stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door stop on the left, one-hand operation, lockable. Insert grid: stainless steel, support area 970 x 980mm Load per grid max. 35 kg Total load with max. grid capacity 100 kg Test chamber lighting: Halogen lamp 20 W, 12 V Control: - 32-bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), * Brand: Svedala * Model: vibrating chute * Dim: length 5000 mm - width 1000 mm Ledpfx Aezgf Auol Njac * incl.: steel construction and grizzly bars.

Condition: good (used), Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator Laodpfx Aexxkbajl Noc Manufacturer: MS, Ultrasonic welding generator -Type: SoniGEN 35/1000 or similar, unfortunately no exact designation -Power output: kVA -Dimensions: 460/150/H150 mm -Weight: 5.5 kg

Condition: good (used), Year of construction: 1971, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Walter Gieseking, Container rotating device, Welding rotating device type SG1 -Load capacity: 1200 kg -Roller spacing: 187 - 1000 mm -Rollers: Ø 175 x 50 mm -Rolling speed: 0.2 to 0.85 m/min Right/Left rotation Ledpfx Ajzgalqel Noac -Control unit: with manual control, speed control via handwheel -Individual components: see photos -Transport dimensions: 1610/570/H330 mm / 1250/300/H330 mm -Total weight: 217 kg

Condition: good (used), CORIMPEX BEAM WELDING MACHINE TYPE BWM TC 2000-1000 3-15 machine. WEB : Height 200 -:- 2000mm (flanges included). Thickness 5 -:- 25mm FLANGE : Width 150 -1000mm Thickness 8-40mm Max. post-deforming thickness = 35 mm on 1000 mm flange width MAX. BEAM WEIGHT : 1000 Kg / metre MIN. BEAM LENGTH : 3000 mm MAX. BEAM LENGTH : 15.000 mm. HYDRAULIC CYLINDER : 1800 mm. TACK-WELDING : Not needed. POWERED ROLLS IN THE : speed = 12 m/min. ENTRY/EXIT CONVEYORS PISTON WORKING : 6/9 Tons. TRAVEL SPEED RANGE : 0,2 -:- 2,1 m/min WELDING PROCESS : submerged Arc Tandem. Ledpfjzc Rl Usx Al Nsac

Condition: excellent (used), Weiss Temperature Chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume approx. 990 liters Data for temperature tests: Temperature range -40°C to +180°C Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min Heat compensation max. 4500 W Feedthrough, installed as standard R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm Maximum load (evenly distributed over the area) of the test chamber floor 150 kg Per insert shelf 50 kg Total load of the shelf supports 100 kg Data for operation: Test chamber lighting: Halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Ledpfx Ajzfzamjl Nsac Rated power 11.5 kW Rated current 22 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 840 kg Type: WT11-1000/40 For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm Laedpfx Ajxm Sagsl Nsc -Table height: 925 mm -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Condition: excellent (used), Weiss Temperature Chamber We offer a Weiss temperature chamber here. Weiss temperature chamber, air-cooled with Weiss condenser cooler Test chamber volume approx. 990 liters Data for temperature tests: Temperature range -70°C to +180°C Temporal temperature deviation in the center of the useful space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min Heat compensation max. 2750 W Feedthrough integrated in the standard configuration R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert shelf 50 kg Total load of the shelf supports 100 kg Data for operation: Test chamber lighting Halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation of water-cooled test cabinets max. heat dissipation to the environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: (converted to R-452a) Ljdezfy Rwjpfx Al Noac Weight: approx. 960 kg Type: WT11-1000/70/5 For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the telephone.

Condition: good (used), Year of construction: 2004, functionality: fully functional, PEDDINGHAUS TDK 1000/9 DRILLING MACHINE Lajdpfjzc I Iyex Al Nsc 9 SPINDLES MAXIMUM PROFILE 1000 X 420mm MEBA 1020 DGP SAWING MACHINE cutting diameter: 510 mm capacity 90 degrees: round: 510 mm capacity 90 degrees: flat: 1020 x 510 mm capacity 60 degrees: round: 500 (400) mm capacity 60 degrees: flat: 500 (400) x 510 mm capacity 45 degrees: round: 510 mm capacity 45 degrees: flat: 750 (670) x 510 mm

Condition: new, rotational speed (min.): 25 rpm, rotational speed (max.): 1,500 rpm, Distance between centers 1000 mm Max. swing over bed 560 mm Max. swing over carriage 350 mm Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Lsdpfjzdr Rysx Al Njac Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, overall weight: 1,720 kg, total height: 1,700 mm, total width: 1,080 mm, total length: 2,200 mm, Distance between centers 1000 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Spindle Taper Camlock D1-6 Spindle speed 25 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm Laodpfx Aozdr Husl Njc If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2013, turning diameter 360 mm turning length 1000 mm Laedpfx Ajzfqi Rel Njc swing diameter over bed slide 215 mm reus 30 - 3000 U/min spindle bore 38 mm feed längs 0,043 - 0,653 m/min total power requirement 3,5 kW weight of the machine ca. 1500 kg dimensions of the machine ca. 1900 x 900 x 1300 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter: 350 mm, turning diameter over bed slide: 350 mm, turning diameter over top slide: 196 mm, center height: 175 mm, turning length: 650 mm, Model: Multiturn 1000 Lodpfxjy N Uk Ns Al Noac Control: Fanuc Oi-TC Year: 2007 S/No.: N91013 Swing Over Bed: 350mm Swing In Gap: 535mm Swing Over Top Slide: 196mm Distance Between Centres: 650mm Spindle Speeds: 1-3500 RPM (3 Ranges) Spindle Bore: 42mm Motor: 7.5 KW Machine with: 150mm 3 Jaw Chuck Duplumatic 8 Station Turret Turret Tool Holders Tail Stock Coolant Pump

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table width: 450 mm, table length: 1,200 mm, spindle nose: BT40, Dugard Eagle 1000 Vertical Machining Centre Model: 1000 VMC Year: 2005 Control: FANUC Oi-MD Table Area: 1200mm x 450mm ‘X’ Traverse: 1020mm ‘Y’ Traverse: 510mm ‘Z’ Traverse: 510mm Max. Spindle Speed: 8000 RPM Spindle Taper: BT 40 ATC capacity: 20 station Machine with: Laodpfx Aey N Ukcjl Noc Swarf Conveyor