Used Scm Record 110 Prisma for sale (8,102)

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Nljdpfx Aho Aflwye Seh

Condition: excellent (used), CATALOGUE NUMBER 8021 TECHNICAL DATA - max. width of workpiece 1100mm - max. height of workpiece 150mm Nedeztaqaepfx Ah Selh 2 units: 1) ribbed rubber roller for calibrating 2) ribbed rubber roller - motor power 11kW - brake - from above: - metal, sliding, split roller - pressure roller - unit - pressure roller - unit - pressure roller - cleaning brush - from below: - 2 metal, sliding rollers - conveyor belt - 2 metal, sliding rollers, output - new conveyor belt - pneumatic belt oscillation - electric table lifting - stepless feed rate adjustment - feed motor 1.5kW - grinding thickness potentiometer - working pressure 8-10 bar - diameter of dust extraction port 3x165mm, 1x140mm - overall dimensions L/W/H 1870x1850x2210mm - weight 2165kg ADVANTAGES – Made in Italy, SCM brand – new conveyor belt – 2 units – grinding thickness potentiometer – unpainted – used sander, very good condition Net price: 26900 PLN Net price: 6255 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, total width: 2,200 mm, total height: 2,680 mm, total length: 2,200 mm, Year of manufacture: 1999 Colour: Grey Empty weight: 1.900 kg Wide belt sander SCM Sandya 10S M2 110 Built in 1999 Sanding belt dimensions 2620x1115mm 380V 1st sanding unit Contact roll 180mm Engine 18.5kW 2nd sanding unit Combi aggregate with sanding pad Engine 11kW Sanding width max 1100mm Sanding height Min/max 4/170mm Throughput speed 4.5-9 m/mins Njdpfoz R A U Uox Ah Selh Dimensions 2300x2205x2500mm, weight 1850kg - Year: 1999 - CE marking present: Yes - Serial number: 101513 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Bottom - - Type of unit: Contact roller - - Sanding belt length [mm]: 2500 - - Sanding belt width [mm]: 1100 - - Roller diameter [mm]: 180 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Bottom - - Type of unit: Combi - - Sanding belt length [mm]: 2620 - - Sanding belt width [mm]: 1115 - - Roller diameter [mm]: 180 - - Roller material: Steel - - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Infeed table length [mm]: 350 - Outfeed table length [mm]: 375 - Feed motor [kW]: 1.5 - Min. feed speed [m/min]: 4.5 - Max. feed speed [m/min]: 9 - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 2200mm x 2200mm x 2680mm (l x w x h) - Transport weight [kg]: 1900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece length (max.): 2,480 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, table length: 2,480 mm, table width: 1,250 mm, CNC – MORBIDELLI UNIVERSAL 2412 TV (SCM Group) Technical specifications: Machine dimensions: approx. 4320 x 1800 x 2100 mm Machine weight: 2100 kg Working range of X-axis: 2480 mm Working range of Y-axis: 1250 mm Z-axis stroke: 150 mm Maximum workpiece thickness: 80 mm X/Y axis speed: up to 78 m/min Z-axis speed: up to 24 m/min Power supply: 3 x 400 V / 50–60 Hz Total installed power: 16.5 kW Rated current: 29 A Operating pressure: minimum 7 bar Compressed air consumption: 100–200 NL/min Drilling unit: - 12 vertical spindles - 6 horizontal spindles (2+2 in the X-axis and 1+1 in the Y-axis) Nlede Aduqaspfx Ah Sjh + integrated grooving saw in the X-axis. Milling spindle: - power: 6.6 - 7.5 kW - speed: 1500-24000 rpm - clamping system: HSK 63F - tool rack with 10 positions Beam-type work table: 6 beams Software: Xilog Plus + PanelMac Windows XP Additional equipment: Suction cups Light curtain safety gate Vacuum pump 90 m3/hour Features: Suitable for MDF, chipboard, and solid wood Robust and reliable construction. Easy operation and maintenance. The machine is suitable for small to medium-sized production facilities. Inspection and testing on site are available. The machine is in good technical condition and has been regularly maintained.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, rotational speed (max.): 8,000 rpm, shaft length: 145 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Router unit Number of motors: 1 Shaft length: 145 mm Motor power: 4 kW Speed: 8,000 rpm Nledpfxexxar Uj Ah Sjh MACHINE DETAILS Installed total power: 5 kW Motor power: 3 kW

Condition: good (used), Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, quick-change tool holder -Turning tool holders: Tool holders 43 pieces -Tool holders: various designs -Inset prism: 110/94 mm -Dimensions: see photos Njdpfxop E Hz Ns Ah Solh -Sale/Price: complete -Transport dimensions: 1200/800/H200 mm -Weight: 450 kg

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 107 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, overall weight: 4,070 kg, Equipment: documentation/manual, We offer this used SCM Casadei Axo 400/38 panel saw, manufactured in 2019. Brand: SCM Casadei Sempre Serial number: AE00000295 Type: SEZ.MON.2 Nlodpfsz R Su Sjx Ah Seh Model: AXO (Passat) 400/38 Year of manufacture: 2019 Weight: 4070 kg Rated voltage: 400 V Number of phases: 3 Current: 40 A Frequency: 50 Hz Short-circuit current: 10 kA If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AB00016224, overall weight: 1,672 kg, type of input current: three-phase, workpiece height (max.): 170 mm, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, workpiece width (max.): 1,100 mm, Equipment: double-sided, Machine in excellent condition. Vacuum table included. Nodpsz Rzyvjfx Ah Sslh For sale due to new acquisition.

Condition: used, Year of construction: 2003, functionality: fully functional, input voltage: 400 V, cutting height (max.): 105 mm, cutting width (max.): 3,200 mm, total length: 4,500 mm, total width: 1,600 mm, total height: 1,800 mm, overall weight: 5,200 kg, Equipment: CE marking, saw blade guard, scorer, SCM Sigma Impact 105 C Beam Saw – 3200 × 3200 mm – 2003 Price: €19,500 + VAT – Ex Works, Ireland SCM Sigma Impact 105 C industrial beam saw / panel sizing saw. Year: 2003 Cutting capacity: 3200 × 3200 mm Blade projection: 105 mm Manufacturer: SCM Model: Sigma Impact 105 C Location: Ireland Condition: Used Availability: Immediately available The machine has been dismantled and is ready for loading and shipping. The SCM Sigma Impact 105 C is a heavy-duty industrial panel sizing saw designed for accurate, high-volume processing of sheet materials including MDF, MFC, chipboard and similar wood-based panels. Machine Specification 3200 mm cutting length 3200 mm rear loading/pusher capacity 105 mm blade projection Automatic programmable pusher Pneumatic workpiece grippers Main saw and scoring saw Pressure beam clamping Automatic cutting cycle Industrial SCM construction Condition & Sale The machine is used and is offered as seen, ex works Ireland. The machine is currently dismantled and prepared for transport. Inspection of the machine and components can be arranged by appointment. The buyer is responsible for collection, transport, installation and commissioning unless otherwise agreed prior to purchase. Assistance with loading and international transport can be arranged at additional cost. Payment in full prior to collection. Export The machine is immediately available for collection from Ireland. We can assist international buyers with: Loading arrangements European and UK transport quotations Installation and commissioning quotations if required Price: €19,500 + VAT, Ex Works Ireland Nodpfxsz Iykme Ah Sjlh Contact for further information, photographs, videos or transport enquiries. Search Keywords SCM Sigma 105, SCM Sigma Impact 105 C, SCM beam saw, used beam saw, used beamsaw, panel sizing saw, automatic panel saw, CNC panel saw, SCM panel saw, 3200 beam saw, 3200 x 3200 panel saw, Holzma alternative, Selco alternative, Gabbiani alternative, used woodworking machinery.

Condition: used, operating hours: 9,974 h, total height: 2,700 mm, total length: 7,700 mm, total width: 2,420 mm, Year of manufacture: 2012 Empty weight: 7.390 kg CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Nodpjwnhccefx Ah Selh Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Details: - └ Description: Machine gives malfunction spindle - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002032 - Operating hours: 9974 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 - Transport dimensions: 7700mm x 2420mm x 2700mm (l x w x h) - Transport weight [kg]: 7390kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: AB00022616, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 901 kg, SCM Class TI 145ep shaper in CE version, manufactured in 2022. Equipped with the READY 3 UP system, featuring a shaper fence with mechanical programming, a FAST sectional table with manual adjustment, and a support for the feeder with manual vertical and horizontal movements. Interchangeable shaper arbor with MK 5 coupling, tool holder cone MK 5 with adapter and clamp (right), and a T-SET rapid tool clamping system. LL version with 2 cast iron table extensions for profiling. Nledpfxjz Nggrj Ah Ssh

Condition: used, Year of construction: 2022, Panel saw Manufacturer: SCM Type: NOVA 400 Year of manufacture: 2022 Technical data Length of sliding table: 3200 mm Maximum saw blade diameter: 400 mm Power supply: 400 V Machine weight: approx. 718 kg Equipment Sliding table made of aluminum Machine start buttons on the sliding table Parallel fence with digital position display Scoring device for clean cuts in composite panels Cross-cutting fence with stops for repeatable cuts Rip fence with position lock Upper saw blade guard on an independent support arm Nodpfo Adr Hlox Ah Sjlh Extension table for large panels Adjustable saw blade height and tilt angle Control panel with emergency stop button Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, total width: 1,899 mm, total height: 2,264 mm, total length: 2,580 mm, working width: 1,350 mm, grinding width: 1,370 mm, overall weight: 1,890 kg, table height: 900 mm, Wide-belt sanding machine Manufacturer: SCM GROUP spa Brand: Casadei Type: Libra 55 RTC 135 Year of manufacture: 2018 Weight: 1,890 kg Technical specifications: Max. working width: 1,350 mm Working height (adjustable table): 4 to 170 mm Working height (optional fixed table): 4 to 200 mm Sanding belt width: 1,370 mm Sanding belt length: 2,620 mm Nsdpoz Ippxjfx Ah Sjlh Feed rate: 3 stages: 4, 5, and 9 m/min Power of feed motor: 0.45 / 0.8 kW Power of main motor: 11 kW (15 hp) Purchase price net: €30,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing available Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2022, overall weight: 718 kg, Circular Wood Saw manufactured in 2022. This SCM NOVA 400 features a sliding table length of 3200 mm and a maximum saw blade diameter of 400 mm. It includes an aluminium sliding table, a scoring device for clean cuts, and an adjustable saw blade height and tilt angle. If you are looking to get high-quality cutting capabilities, consider the SCM NOVA 400 circular wood saw we have for sale. Contact us for further details. • Sliding table length: 3200 mm • Maximum saw blade diameter: 400 mm • Power supply: 400 V • Equipment/features: • Aluminium sliding table • Machine start buttons on the sliding table • Rip fence with digital position display • Scoring device for clean cuts in composite panels • Crosscut fence with stops for repeatable cuts • Riving fence with position lock • Upper saw blade guard mounted on an independent support arm • Extension support table for large panels Nljdpfxj Ad E Sns Ah Seh • Adjustable saw blade height and tilt angle • Control panel with emergency stop button

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,259 kg, This SCM SI 5 panel saw was manufactured in 2019. It features a maximum cutting height of 200 mm at 90° and a sliding table version of 3800 mm, allowing for format cuts up to 3800 x 3200 mm. The machine is equipped with an "EASY TOUCH 7" electronic control unit, enabling up to 999 storable programs. If you are looking to get high-quality cutting capabilities, consider the SCM SI 5 panel saw we have for sale. Contact us for further details. - Controlled Axes: Up to 3 axes (Main Saw Height, Main Saw Tilt, Programmed Rip Fence / Scoring Unit positioning) - Voltage: 400 V - Phases: 3 ~ - Current: 22 A - Frequency: 50 Hz - Short-circuit current (Icc): 12 kA - Main Motor Power: 9 kW (12 HP) at 50Hz (with automatic star-delta starter) - Scoring Motor Power: 0.9 kW (S6-40%) - Main Saw Blade Diameter: Up to 550 mm (without scoring blade); up to 450 mm (with scoring blade) - Max. Cutting Height at 90°: 200 mm - Max. Cutting Height at 45°: 130 mm - Saw Blade Swivel: 46° - Saw Blade Speeds: 2500 / 3500 / 5000 RPM - Scoring Saw Speed: 8500 RPM - Cutting Width at Rip Fence: 1500 mm - Sliding Table Version: 3800 mm (Format cuts up to 3800 x 3200 mm) - Exhaust Socket Diameters: 120 mm (on frame), 100 mm (on saw blade guard) - Fence System: Programmed rip fence with THK guide and recirculating ball screw (25 m/min speed), fully swingable under the table - Blade Clamping: "Pro-Lock" system for quick clamping of main saw blade with keyless riving knife adjustment Nsdps Adti Usfx Ah Sjlh

Condition: used, Year of construction: 2019, overall weight: 1,047 kg, Combined Surfacing and Thicknessing Planer Manufacturer: SCM GROUP spa Model: SCM Type: L Invincible FS7 Year of Manufacture: 2019 Weight: 1,047 kg Usable Working Width: 520 mm Total Table Length: 2310 mm Cutterhead Diameter: 120 mm Planerhead Speed: 5000 rpm 4 Knives: 35 x 3 x 520 mm Aluminum Surfacing Fence: 1200 x 190 mm Surfacing Fence Angle Adjustment: from 90° to -45° Min./max. Planing Height: 3 / 250 mm Feed Rate (Thicknessing): 5 - 8 - 12 - 18 m/min Dust Extraction Port Diameter (Surfacing): 120 mm Dust Extraction Port Diameter (Thicknessing): 120 mm Purchase Price (Net): €15,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m. Nodpsz Iqqksfx Ah Sjlh

Condition: used, Year of construction: 2018, saw blade diameter: 550 mm, Panel saw Manufacturer: SCM GROUP spa Brand: SCM Nedpfx Asz Iqg Eeh Sslh Type: SI 5 Year of manufacture: 2018 Main saw blade diameter: 550 mm Saw blade swivel angle: 46 degrees Max. saw blade cutting height at 90 degrees: 200 mm Max. saw blade cutting height at 45 degrees: 130 mm Cutting width with parallel fence: 1,500 mm Purchase price (net): €16,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible If desired, we can arrange suitable financing through our company. Please contact us. Subject to change, errors and prior sale. Sale is made without warranty and guarantee, and only to commercial businesses. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AH/109736, functionality: fully functional, input voltage: 400 V, edge thickness (max.): 2 mm, height adjustment type: mechanical, overall weight: 250 kg, Equipment: CE marking, machine in excellent condition, used very little practical and versatile edge gluing machine for carpenters for straight edges for angled edges particularly suitable for edge banding of shaped parts Nsdpfx Ajzvmygoh Sjlh READY FOR OPERATION

Condition: used, Year of construction: 2016, We are offering this used SCM STARTECH CN drilling machine, manufactured in 2016. Nlsdpfx Ahjz Afdke Soh Year of manufacture: 2016 Serial number: AB/226922 Type: F004 Model: STARTECH CN The advertised price is €14,500 net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Nljdpjz Ebzhjfx Ah Seh Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Nsdsz Ehvxjpfx Ah Solh

Condition: excellent (used), Year of construction: 2019, Clean air filter (filter class M, filter bags, i.e. suitable for fine dust) Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Intake nozzle diameter: 300 mm Max. volume flow: 5,750 m3/h Negative pressure at rated flow: 3,100 Pa Filter area: 30.0 m2 Number of filters: 60 pcs Compressed air cleaning Incl. integrated pre-separator Incl. integrated extinguishing system (connection to the water supply) Chip collection volume: 3 x 250 l Sound pressure level: 75 dB(A) Incl. dust baffle Nljdpfxo Aazbwe Ah Ssh Incl. CE & all documents Dimensions L x W x H = 3435 x 1100 x 2440 mm Weight 850 kg Note regarding used machines: • Subject to errors in technical data and prior sale. • Indicated prices are ex-works prices, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machine on site. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Nlodpfx Ahez Iyvpj Seh

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 3285401, type of input current: three-phase, SCM Superfici Mini Plus P spray booth, automatic spraying machine, year of manufacture 2023. Nljdpfx Ahoz Nggxj Seh

Condition: ready for operation (used), Year of construction: 2023, overall weight: 623 kg, Panel saw manufactured in 2023. This SCM NOVA SI 30 features a maximum main blade diameter of 315 mm and a cutting height of 100 mm at 90°. It offers a rip capacity of 1000 mm to 1270 mm, depending on configuration. If you are looking to get high-quality cutting capabilities, consider the SCM NOVA SI 30 machine we have for sale. Contact us for further details. • Max. main blade diameter: 315 mm • Max. cutting height at 90°: 100 mm • Max. cutting height at 45°: 70 mm • Blade tilting: 90°–45° Njdpfxez Sqpvj Ah Selh • Rip capacity (parallel fence): 1000–1270 mm (depending on configuration) • Voltage: 400 V (three-phase) • Frequency: 50 Hz • Nominal current: 12 A