Used Shw Ufz 4 for sale (57,680)

Condition: good (used), Year of construction: 1995, functionality: fully functional, SHW UF 31, year of manufacture 1995, Heidenhain TNC 415 B control, travel X/Y/Z 1000/700/625 mm, feed rate X/Y/Z 2,000 mm/min, rapid traverse X/Y 4,000 mm/min, rapid traverse Z 2,000 mm/min, rotary table feed up to 4 rpm, main drive 20 kW, tool holder SK 50, programmable milling head, swivel time horizontal/vertical 6 sec, NC rotary table, spindle speed stepless up to 2,500 rpm, spur gearing, milling head swivels +/- 90°, quill manual 115 mm, quill motorized 100 mm, electronic handwheel, connected load 35 kW, milling spindle bearings replaced in 2025. Iiodpfxeyx Un To Apnob

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Iisdpfx Aped Tbbdenjb - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: Iodpjfdkb Tjfx Apnoib - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth Iisdpfx Apsd Tqalenob 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Iiedpfx Apefdkb Usnsb Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Iijdpfjguk A Hox Apnjb Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Iedpfx Asfdkbhjpnsib The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Iodpfxjguk Dks Apnoib - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Iedpfx Asguk Dvepneib When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, I am offering a professional drum pump from the renowned German manufacturer Lutz – designed for use with various liquids (chemicals, oils, industrial media). ✅ Condition: ✔️ New ✔️ Motor housing has been replaced with an original (factory) part – the previous one was damaged during transport ✔️ Fully functional, ready for operation 🔩 Technical data: Manufacturer: Lutz Pumpen GmbH (Germany) Pump model: MP PP 50/41-R DL SS Motor: MI 4-230 Power supply: 220–230 V / 50 Hz Power: 450–500 W Iisdeyzulwjpfx Apnob Current: 2.5 A Protection class: IP24 Tube length: 1200 mm Material: PP (polypropylene) + stainless steel (SS) ⚙️ Applications: - Industrial chemicals - Oils, technical fluids - Industry, workshops, manufacturing - Emptying barrels and tanks 📦 Included: ✔️ Lutz pump ✔️ MI 4-230 motor ✔️ Hose + fittings as shown in the photos 🌍 Country of origin: 🇩🇪 Germany ℹ️ Additional information: - High-quality equipment – German-made - Ideal for professional applications - Shipping or personal collection available

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting height (max.): 400 mm, cutting width (max.): 400 mm, total height: 1,720 mm, total length: 2,600 mm, total width: 2,400 mm, overall weight: 2,200 kg, table height: 700 mm, cutting range round steel at 90°: 400 mm, feed length X-axis: 600 mm, saw band length: 5,700 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsawing machine in heavy-duty construction, with a horizontally parallel traversing saw blade, designed for cutting profiles, pipes, and solid materials of all grades, including extremely tough-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. The saw unit is constructed in a fully solid design from polymer concrete, providing maximum running smoothness and service life for the saw blades. Guidance of the sawing unit is via two vertical square columns (double-column guide) with hardened and ground guide rails. Mechanical saw band tensioning with preloaded carbide saw band guides. Material clamping is performed by two horizontal frame clamping vises. Material feed is via a non-driven roller conveyor integrated into the machine with twelve transport rollers, enabling easy transport of short offcuts. Year of manufacture: 2008 Cutting range round: 400 mm Cutting range square: 400x400 mm Material feed (automatic): 600 mm Multiple material feed: 99,999 mm Cutting speed (infinitely variable): 20–130 m/min Total drive power: 7 kW Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material support height: 700 mm Saw band dimensions: 5,090 x 41 x 1.3 mm Minimum cut length in automatic mode: 6 mm Remaining piece length in automatic mode: 80 mm Iiodpfx Asupvrxspneb Voltage: 380V/50 Hz Dimensions (LxWxH): 2,600 x 2,400 x 1,720 mm Weight: 2,200 kg Equipment: • Coolant system • Full enclosure • CNC control • Standstill monitoring • Side guide rollers • Height measurement system • Light barrier

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H With manual gate valve Gas strut opening lid Internal stainless mesh screen Mobile on lockable castors Some with pneumatic vibration device. Some with level sensor device In excellent condition Isdjurf Twepfx Apneib

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame Iedpfxswq Sv Eo Apnjib

Condition: excellent (used), load capacity: 4,000 kg, Equipment: foot remote control, Heinrichsglück 4 ton load capacity, TOP condition 4000 kg capacity welding positioner, complete set Horizontal load capacity: 4000 kg, tilted: 4000 kg Infinitely variable tilt and speed adjustment Very robust construction Iijdpfx Apeyuph Eenob Speed continuously adjustable from 0.05 to 1.5 rpm, digital display Table diameter: 1500 mm Height horizontal: 1230 mm, tilted to center: 1000 mm Length 2.0 m x width 1.6 m Hand remote control and foot pedal

Condition: excellent (used), Pull stud (28542) SK 50 Iiodpjud Smmjfx Apnjb SHW Unit price 15 Euro Dimensions, see picture 54 pieces available / 98 mm 6 pieces available

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Feature Specification / Detail Capacity ~ 430 litres External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Iedpfx Aoxhdthspnsib Door Type Solid door (non‑glass) version Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: excellent (used), Year of construction: 2016, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (headstock vertical): 1,300 mm Isdpfx Apsh Rh T Henoib - Z-axis (headstock horizontal): 750 mm Control system - CNC control: Siemens 3 M Conversion to Heidenhain TNC 415 possible Automatic swivel head (change between horizontal and vertical machining) quill 120mm Milling spindle holder SK 50 speed 2500rpm Year of manufacture 1994 - 2016 general overhauled Stepless NC rotary table - Rückle PKTF 55 - Clamping surface: 1500 x 1250 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main focus is in the area of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - Control system modernization

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,500 mm, table length: 850 mm, rotational speed (max.): 2,500 rpm, quill stroke: 120 mm, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (vertical headstock): 1,000 mm - Z-axis (horizontal headstock): 750 mm Control system - CNC control: Heidenhain TNC 355 Automatic swivel head (change between horizontal and vertical machining) Quill 120mm Milling spindle holder SK 50 Speed 2500 rpm Partial overhaul 2014 - Year of construction 1990 - Inspection/repair 2025 Table assembly - Travel distance: X = 1,500 mm - Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard cabin We have ALL spare parts for this series (SHW UF 5) in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts Iiedsvfm I Tjpfx Apnsb - Customer service - Machine service - Machine overhauls - Control modernization _____ Used machine - used milling machine - used bed type milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - CNC milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - metal milling machine used metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM Milling Machine - MBM Machine

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 8 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, pivoting range: 340 °, table length: 5,000 mm, table width: 1,730 mm, table height: 300 mm, Technical Data Travel Distances • X-axis (bed): 5,000 mm • Y-axis (vertical): 1,600 mm • Z-axis (spindle head): 1,500 (1,200) mm Control System • CNC Control: Heidenhain TNC 415 Feed Rate • X, Y, and Z axis infinitely variable: 2 – 8,000 mm/min Iijdpfx Asyf Ai Repnob Universal Milling Head in Orthogonal Design • Swivel range of milling head mount (motorized): 340 degrees • Swivel range of milling head: 180 degrees • Tool holder: SK 50 Year of manufacture: 1992 Inspection: 2025 The machine has been recommissioned and tested by MBM and can be demonstrated under power at D-73479 Ellwangen. About Us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main area of expertise is tool milling machines. Our range of services includes spare parts delivery, on-site customer service, machine overhauls, and control system upgrades. Our Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ____ Used machine – used milling machine – used moving column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used CNC milling machine – used boring milling machine – used metal milling machine – used metal mill – used metal milling machine – used CNC mill – CNC milling machines – milling machine – large part machining – CNC large part machining – SHW – UF6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table length: 4,000 mm, table width: 1,500 mm, tank capacity: 500 l, SHW PowerSpeed 5 Travel Ranges • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle horizontal): 1,300 mm Control System • CNC control: Heidenhain iTNC 530 Feed Speed • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head swivel range (mounting): 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Short-term: 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Clamping Plate • Clamping surface: 4,000 x 1,500 mm Chip Conveyor • Fork length: 4,000 mm Coolant System • Tank capacity: 500 l Iisdpfow I Rz Hex Apneb Splash and Chip Protection • One-sided, with 2 manually sliding doors About the Company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts delivery, on-site customer service, machine overhauls, and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - CNC control modernization ----- _____ Used machine – used milling machine – used traveling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used boring and milling machine – used metal milling machine – used metal mill – used metal machining center – used cnc mill – cnc milling machines – milling machinery – large part machining – cnc large part machining – milling – shw – PS5 – PS 5 – Powerspeed – SHW PSZ 5 – SHW Powerspeed – SHW Powerspeed 5 – PSZ 5 – Heidenhain – MBM milling machine – MBM machine – column-type milling machine

Condition: excellent (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, pivoting range: 360 °, SHW PowerSpeed 5 Travel Paths • X-axis (Bed): 10,000 mm • Y-axis (Vertical): 2,100 mm • Z-axis (Horizontal spindle): 1,300 mm Control System • CNC Control: Heidenhain iTNC 530 Feed Rates • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Spindle speed range: 36 – 4,000 rpm o Intermittently 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Coolant System • Tank capacity: 500 l About the company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include supply of spare parts, on-site customer service, machine overhauls, and control system modernization. Services: Iodpfjxgq Ayjx Apnjib - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ---- Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used CNC milling machine - used bore milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC mill - CNC fraesmaschinen - CNC milling machines - milling machine - large component machining - large part machining - CNC large part machining - milling - SHW - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: excellent (used), Travels - X axis (bed): 16,000 mm - Y-axis (vertical): 2,100 mm o Option Y = 3.100 mm - Z-axis (headstock): 1,200 (1,500) mm Control - CNC control: Siemens Sinumerik 840 C o Option control modification Heidenhain iTNC 530 o Option control modification Heidenhain TNC 640 o Option control modification Siemens Sinumerik 840 SL Feed rate - X-, Y- and Z- axis stepless from: 2 - 12.000 mm/min Universal milling head in orthogonal design - swivel range milling head: 340 x 1 degree - swivel range milling head: 180 x 1 degree - tool holder: SK 50 DIN 69871 - Speed: 2.800 rpm Clamping plate - T-slots: 28 H7 - T-slot distance: 250 mm, - clamping area: 18.000 mm x 1.500 mm Chip conveyor (2 pieces) - Ejection height above floor: 1,250 mm Iiedpfonvd Tnex Apnob CNC insert rotary tables (4 pieces) - clamping surface diameter 1.250 mm Coolant system - Paper belt filter system o tank capacity: 30.000 l General overhaul 2016 • 1996 - Year of manufacture • 2016 General overhaul at MBM About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main focus is in the area of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - Control system modernization _____ _____ used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metal working - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - cnc milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - cnc milling machine used - metal milling machine used - metal milling machine used - cnc milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - cnc milling machine used metal milling machine used - used cnc milling - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - cnc large part machining - milling - shw - uf6 - uf 6 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 6 - UFZ 6 - UFZ6L - UFZ 6 L - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: good (used), The scope of delivery includes: 56x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: Iisdpfjpl Tfwsx Apnob This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Iodpfx Apjhq Txhjnoib Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 02x swivel castors, new 02x brake/steering rollers, new 01x angle set, new for mounting the worktop 08x safety hook, new Material color: compl. galvanized

Condition: good (used), Included in delivery are: 10x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Iiodpepl Tdgefx Apneb Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.