Used Single Column Rapid Motion Press for sale (25,921)

Year of construction: 2003, condition: used, Pressing force: 63kN, stroke: 300mm, motor power: 7.5kW, on-site inspection is possible. Kdjdoz R A Rvspfx Acpsu

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Ksdper I E Itjfx Acpsdu Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Year of construction: 1979, condition: used, machine/vehicle number: 3534, Pressing force: 630 kN Return force: 100 kN Maximum ram stroke: 200 mm Installation height: 400 mm Stand height (approx.): 350 mm Table size: 610 x 800 mm Through-hole in the table: 100 mm Ram bore: 40 mm Ram speed (forward stroke): 350 mm/s Ram speed (pressing stroke): 18 mm/s Ram speed (return stroke): 380 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 1800 x 920 x 2440 mm Weight: 3.94 t Kdedsb Hk Dzepfx Acpeu

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz Kdodpsx U Eiajfx Acpou - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: new, Year of construction: 2025, neu 2025 070145 prompt, Zwischenverkauf v Türkei 44500 € 849.95 € 1 Ksdpjxcg D Sjfx Acpjdu 40 to 4 mm 630 mm 450 mm 160 mm 3 - 75 mm 154 1/min 420 x 275 mm 8 75 mm 40 mm 230 mm 293 mm 4 kW 1174 mm 1540 mm 2200 mm 2850 kg 8-fold ram guide 2-hand control panel and foot pedal Automatic central lubrication Front light guard Vibration pads User Manual in German with CE Declaration of Conformity

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU Kjdpfx Acodzqltjpedu - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Condition: new, Year of construction: 2026, pressing force: 15 t, C-Press – 15 T – 300 × 300 mm For sale is a C-press from the manufacturer DURENDUS with a maximum pressing force of 15 tons. The machine has a table size of 300 × 300 mm, a maximum installation height of 350 mm, and a stroke of 250 mm, making it suitable for insertion work, assembly processes, and small-batch production in industrial applications. ##### Technical Data + Information: ==== General Information - Design: C-frame / Single-column press - Manufacturer: DURENDUS - Pressing force: 15 T - Table size: 300 × 300 mm - Plunger plate: 300 × 300 mm - Installation height max.: 350 mm - Working height: 800 mm - Overall height: approx. 2,000 mm - Overall width with control cabinet: approx. 900 mm - Overall depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Plunger plate guidance: 2-way Ksdpfx Asy Twg Ijcpsdu ==== Hydraulic Cylinder - Stroke: 0–250 mm - Working pressure: 250 bar - Starting speed: 17 mm/s - Return speed: 25 mm/s ==== Hydraulics & Drive - Hydraulic unit: DUPLOMATIC - Hydraulic pump: ASC - Flow rate: 7.5 l/min - Tank volume: 50 l - Cooling: Air cooler - Oil level monitoring: electronic - Hydraulic unit: mounted on top of the machine ==== Control - PLC: SIEMENS S7-1200 - Touchscreen: SIEMENS 7" - Pressure setting via touchscreen - Stroke setting via touchscreen - Temperature monitoring of hydraulic oil - Error display on display - Remote service / remote maintenance possible - Operation: Two-hand operation ==== Safety - Light curtain - Two-hand operation - Temperature monitoring - Automatic shutdown in case of overheating - CE-compliant design ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 2.2 kW - Lighting: LED - Protection class control cabinet: IP 54 ##### Application areas: Insertion, assembly work, small-batch production, jig and fixture construction, toolmaking, metalworking, fine assembly, testing, workshop applications (Hydraulic press, C-press, C-frame press, Single-column press, 15 T press, 15-ton press, assembly press, insertion press, small-batch press, workshop press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly attractive prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, Year of construction: 1972, pressure 40 t throat 220 mm stroke 8-88 mm stroke - stepless adjustable 30-140 mm ram adjustment 63 mm Kdsdjztfz Rspfx Acpju weight of the machine ca. 2600 t

Condition: used, pressure 45 t throat 230 mm Ksdpfx Acsykb Ddspodu stroke 10 - 140 mm no. of strokes 80 Hub/min ram adjustment 55 mm total power requirement 3,0 kW weight of the machine ca. 2,7 t

Condition: used, pressure 25 t throat 250 mm stroke 10 - 120 mm no. of strokes 120 Hub/min Kdedjykb A Tjpfx Acpsu ram adjustment 45 mm total power requirement 1,5 kW weight of the machine ca. 1,95 t

Condition: used, pressure 35 t throat 300 mm stroke 10 - 120 mm no. of strokes 110 Hub/min ram adjustment 50 mm total power requirement 3 PS Kdjdpfx Acoykb D Rspsu

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressing force: 63 t, pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Kdjdefhcc Ujpfx Acpju Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: used, Year of construction: 1970, ja weight of the machine ca. 9,5 t serial number 10457/2 160000 KG stroke of worktool slide 41 Hub/min Kjdpfxjvvx Exj Acpjdu +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec Kodpfx Acsu Nfudepodu daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Year of construction: 1974, pressure 075 t throat 380 mm stroke 16- 140 mm number of strokes - idle run 105 /min shut height (stroke down, adjustm. up) 260 mm ram adjustment 80 mm table surface area 750 x 640 mm Ksdpez N Hu Nsfx Acpedu ram surface 500 x 200 mm hole in the table 150 mm table height over floor 800 - 920 mm total power requirement 7 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Machine has an adjustable table and air operated clutch and brake.

Year of construction: 1989, condition: ready for operation (used), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible. Ksdpjvyirksfx Acpsdu

Condition: new, Year of construction: 2026, neu 2026 070223 prompt, Zwischenverkauf v Türkei 25700 € 490.87 € 1 15 to 1.4 mm 320 mm 490 mm 130 mm 1 - 40 mm 200 1/min 4 40 mm 30 mm 210 mm 215 mm 1.5 kW 1160 mm 1180 mm 1730 mm 922 kg Welded steel frame construction 4-fold ram guide Kdedpfx Aswirldjcpou Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate

Condition: used, pressure 100 t throat 355 mm stroke 8 - 130 mm table surface area 710 x 1200 mm T-slots at tabel 3 clamping plate thickness 75 mm no. of strokes 50/80 Hub/min ram adjustment 80 mm ram surface 450 x 560 mm T-slots at ram 2 tool shank hole (depth x diameter) 100 x 50 mm max. distance table - ram 540 mm distance between columns 400 mm connected load 11,5 kW weight of the machine ca. 9,0 t Overall size 1,65 x 2,25 x 3,05 mm - increased installation height Kodpfetqm Dhox Acpsdu - with die cushion - converted to safe control (Pilz PLC), safe for “hand inlay work”. on the open tool"

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Technical specifications: - Maximum pressing force: 160 t - Maximum ram stroke: approx. 500 mm - Average working speed: approx. 92 mm/s - Return speed: 125 mm/s - Installation height: approx. 1000 mm - Overhang to center of ram: 360 mm - Ram mounting pin: 40 mm - Table size: 900 x 630 mm - Table bore/opening: 220 mm - Table height above floor: 720 mm - Oil capacity: approx. 200 liters - Drive: 400 V / 17 kW Kdjdpjzn H Rvofx Acpju - Space requirement: approx. W 1150 x H 3600 x D 1850 mm - Weight: approx. 7500 kg

Condition: used, pressure 100 t stroke 300 mm Cylinder 205 mm distance between table / ram 520 mm table surface area 1100X350 mm ram surface 350X350 mm total power requirement 7,5 kW with roller conveyor, 1: Roller conveyor: 2000x500 inlet Kodpfx Aoyutqwecpodu 1: Roller conveyor: 2000x500 outlet The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1991, pressure / t plate thickness / mm no. of strokes / Hub/min Condition: used The punching machine works perfectly. A functional video is available. Ksdpfswgi S Nsx Acpodu

Year of construction: 2020, condition: like new (used), pressing force: 150 t, pressure:150 t stroke:500 mm Weight of machine approx.:ca. 8,5 t dimensions:1200x1800x3100 mm Engine Output:10 kW Max Working height:1000 mm Approaching Speed max. :9,9 mm/sec Pressure Speed:100t = 9,9 bis 0 mm/sec Table height above ground level (approx.):1000 mm :Schmiernippel column diameter:230 verchromt mm Return Speed:25 mm/sec Kdodpfx Acodxvfijpeu :500 l demand for oil:ca 400 l Maintenance Balcony:5800 ? :3900 ? :2800 ? :4800 ? :29000 ? :8200 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Condition: used, Single-column – Eccentric press PELS - RICHTER, type PEKR 125 Machine no. 20684, year of manufacture 1967 Pressing force: 125 tons Reach: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 450 mm Arbor hole: Ø 50 mm Stroke rate: 60 strokes/min Table height above floor: 900 mm Motor power: 7.5 kW Power connection: 380 volts, 50 Hz Kdjdpjfim Thsfx Acpou - Overload protection by shear plate in the ram - Compressed air coupling-brake combination DESCH - Ram weight balancing cylinder - Manual ram adjustment - Two-hand operation - Cam indexing mechanism - Central grease lubrication system Vögele - Stroke counter Space requirement L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Condition: used, Year of construction: 1981, Technical details: Kdjdjyk Utljpfx Acpsu pressure: 40 t

Condition: new, Year of construction: 2026, machine/vehicle number: YC27-200T, functionality: fully functional, pressing force: 200 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 140 mm/s, table width: 940 mm, table length: 740 mm, table height: 750 mm, throat depth: 400 mm, overall weight: 14,000 kg, Equipment: CE marking, documentation/manual, Digima YC27-200T Single-Column Press Hydraulic C-frame press with a 200-ton capacity for metal forming. The Digima YC27-200T is a modern, hydraulic single-column C-frame press designed for a wide range of metal forming processes. This machine is suitable for cutting, blanking, bending, light stamping, straightening shafts, and processing components requiring very high clamping forces. The C-frame design provides convenient access to the work area from three sides, facilitating material handling, workpiece positioning, and tool changes. The welded steel frame ensures high rigidity, minimizes deformation under load, and supports process repeatability. Key Advantages Why choose the Digima YC27-200T press? 200-ton capacity — very high working force for blanking, bending, stamping, and straightening components. C-frame design — access to the work area from three sides simplifies operation and tool changes. Welded steel frame — high rigidity, reduced deformation, and stability under load. Integrated valve block — compact hydraulic system design and rapid machine response. Fully enclosed drive — increased work safety and easier machine maintenance. Intuitive operation — lever-pedal system and control panel support comfortable operator use. Kdsdpfx Acez Ari Topou Applications Where will the YC27 hydraulic press be useful? The Digima YC27-200T single-column press is designed for use in production facilities, tool rooms, maintenance departments, and industrial workshops where high clamping forces, convenient workpiece positioning, and a repeatable work process are required. Bending and forming — processing metal components using appropriate tooling. Blanking and cutting — working with parts requiring high, controlled clamping force. Light stamping — application in metal component forming processes. Straightening shafts and components — correction of machine components and technical parts. Tool rooms — assembly, fitting, testing, and servicing of production tools. Industrial production — repetitive operations with stable and safe working conditions. Technical Specifications: Model: YC27-200T Machine type: Hydraulic single-column C-frame press Nominal capacity: 2000kN/200ton Motor power: 18.5kW Maximum system pressure: 25MPa Stroke adjustment: 10-180mm Maximum slide stroke: 180mm Maximum mounting height / clearance: 80-380mm Table height from the ground: 750mm Slide dimensions: 770x580mm Table opening: 250mm Mounting hole: Ø70 mm Throat depth / outreach: 400mm Fast descent speed: 21 mm/s Working speed: 8mm/s Return speed: 140mm/s External machine dimensions: 1800x2100x3600mm Machine weight: approx. 14000kg Type: Press Brand: Digima Condition: New Main application: Cutting, blanking, bending, light stamping, straightening shafts and components.