Used Soitaab Lineatech-Nova for sale (219)

Year of construction: 2014, operating hours: 59,436 h, condition: used, functionality: fully functional, machine/vehicle number: 100010336, Buderus Loganova EN20 CHP Unit, 19 kW electric / 38 kW thermal For sale is a Buderus Loganova EN20 combined heat and power (CHP) unit manufactured in 2014. The unit comes from a commercial property in 70567 Stuttgart and is being decommissioned due to an upgrade of the energy supply. Since commissioning, the CHP unit has been regularly serviced as part of a premium maintenance contract. A documented service history is available. °°°Technical Data:°°° * Manufacturer: Buderus * Type: Loganova EN20 * Serial Number: 100010336 * Year of Manufacture: 2014 * Electrical Power: 19 kW * Thermal Power: approx. 38 kW * Fuel: Natural Gas * Fuel Power: 35–56 kW * Electrical Operating Range: 9.5–19.0 kW * Supply Voltage: 400 V * Rated Current: 36 A * Rated Frequency: 50 Hz * Pre-fuse: min. 63 A * Gas Inlet Pressure: 20–65 mbar * Max. Supply Temperature: 85 °C * Max. Operating Pressure: < 6 bar * Device Type: B23 * Protection Class: IP40 * Rated Speed: 1,522 rpm °°°Operating Hours:°°° * 59,436 operating hours * 6,031 start cycles °°°Condition:°°° The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. Based on initial assessment, the heating water pump is defective. The CHP unit is currently out of operation and is being offered with the corresponding repair requirements. °°°Location:°°° Gjdpfezv Sfnox An Ieug 70567 Stuttgart, Germany The planned decommissioning or dismantling is expected to take place between August and September 2026. An inspection is possible after prior arrangement. We will gladly provide additional photos, technical documents, and information on the available service and maintenance history upon request. Sale of a used technical unit in its current condition.

Condition: excellent (used), 1 x Oddy Novatek 2 Roll Plant Gujdpfsy Hk Daox An Isg

Condition: used, Year of construction: 2015, operating hours: 607 h, functionality: unexamined, overall weight: 544 kg, input voltage: 24 V, power: 2.13 kW (2.90 HP), battery voltage: 24 V, gradeability: 10 %, We are offering this used Comac INNOVA 70S scrubber dryer, manufactured in 2015. Model: INNOVA 70S Guedjzzq Skspfx An Ijg Year of manufacture: 2015 Voltage: 24 V Maximum incline: 10% Power consumption: 2130 W Battery weight: 132 kg Machine weight: 544 kg Protection class: IP23 Part number: 105732 Serial number: 115000030 If you have any questions or require further information, please do not hesitate to contact us.

Condition: new, 1 brand-new hydraulic press brake with 2-axis NC positioning control, make ELGO P 40 Make: LAMI NOVA, Origin China Model: P 2600 Exclusive representation! Technical data: Pressure capacity 100 t Folding length 2600 mm Clearance between the uprights 2050 mm Projection 320 mm Installation height 405 mm Stroke 140 mm Feed speed 60 mm/s Working speed 7.5 mm/s Retraction speed 55 mm/s Drive power 7.5 kW Dimensions L x W x H 3050 x 1650 x 2520 mm Weight 6200 kg Accessories / special features: - 2-axis NC positioning control, make ELGO P 40 for motorized plunge depth and backgauge plunging depth and the back gauge - PM 1 upper tool, consisting of 3 x 835 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 60 x 60 mm with several V-openings - Back gauge with ball screws, length approx. 600 mm - Front support arms - Foot pedal with EMERGENCY STOP - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electrical system SCHNEIDER Gueder Hby Hopfx An Ijg - Operating instructions - CE-compliant Delivery time: approx. 8-10 weeks, after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: new, 1 brand-new hydraulic press brake with 2-axis NC positioning control, make ELGO P 40 Make: LAMI NOVA, Origin China Model: P 2100 Exclusive representation! Technical data: Pressure capacity 100 t Folding length 2000 mm Clearance between the uprights 1550 mm Projection 320 mm Installation height 405 mm Stroke 140 mm Feed speed 60 mm/s Working speed 7.5 mm/s Retraction speed 55 mm/s Drive power 7.5 kW Dimensions L x W x H 2650 x 1650 x 2520 mm Weight 5500 kg Accessories / Special features: - 2-axis NC positioning control, make ELGO P 40 for motorized plunge depth and backgauge plunge depth and back gauge - PM 1 upper tool, consisting of 2 x 835 mm and 1 x 435 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 60 x 60 mm with several V-openings - Back gauge with ball screws, length approx. 600 mm - Front support arms - Foot pedal with EMERGENCY STOP - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electrical system SCHNEIDER - Operating instructions - CE-compliant Delivery time: approx. 8-10 weeks, after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Gusder Hbx Njpfx An Isg DE - 44143 Dortmund-Wambel

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Guedpfx Anev S Uz Ie Iog Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: used, Year of construction: 2020, _____KTS 30 Special / Crane-Manure Tank Saddle Trailer, 3-axle, 30 cbm tank capacity - V2A stainless steel tank, DIN 1.4301, manufactured in-house - Nova-Gray powder-coated frame - Tank diameter 2200 mm - Manhole at the rear - 3 baffle plates specially welded - Rinsing system for stirring the contents - 2 x hose storage, aluminum - Tire size 385/65 R 22.5 - 3 axles, SAF with air suspension - ABS - EBS - Disc brakes with special off-road protection - Wabco braking system with spring brake accumulator and parking brake - 1st axle as a lift axle with starting aid - 2nd axle rigid - 3rd axle trailing steering axle with automatic locking from 30 km/h and when reversing - Automatic filling shut-off via float and indicator at the front - Free filling and venting - 6 x polyethylene fenders - 2 x LED work lights at the rear - Aluminum support legs - Underrun protection with truck tail lights - 1 x lockable storage box on the left, water tank with soap dispenser for hand washing on the right - Document holder - Ge-Ka couplings for filling at the suction arm - Compressed air discharge at the suction arm for suction hose - TÜV inspection - Surcharge for tank with 31.7 cbm - KTS surcharge for 31.7 cbm tank instead of 30.0 cbm (longer chassis required) - All KTSPROFI package, KTS 30 light - Simplest operation by pressing a button - Fully automatic interlocking of the tank ventilation valves - No possibility of incorrect operation - With overpressure and underpressure valves - Ventilation valve and suction valve as pneumatic flat gate valves - Main control panel at the rear left in a stainless steel housing with laser-engraved control panel - Additional control panel at the front left, level indicator at the rear with cover - Automatic pump shut-off when full - Pump Vogelsang 6 cbm KTS 30 - Vogelsang rotary lobe pump VX 186-260, 6,000 liters / min. - Injection system and interchangeable housings - Docking funnel at the top, 8 inches with knife gate valve (KTS) - with pneumatic actuation (flat gate valve) for all vehicles - Pump mounting parts in stainless steel 1.4301 - instead of galvanized version - Flat gate valve under the tank, KTS 30 - Flat gate valve under the tank for discharging with KTS 30 (MANDATORY !! for KTS docking funnel at the bottom and if there is the possibility of transferring liquid) - Overflow tank, KTS - made of stainless steel with swivel flap and drain valve - Additional LED headlight at the front (2 pieces) - 2 LED spotlights at the front, mounted under the hose trays on the right and left - Transfer crane 6" KTS short - Transfer crane in 6" up/down, right/left, approx. 6 m long. Only for emptying! - Slide dome cover 600 KTS 30 - Slide dome cover 600 pneumatic for KTS 30 - Storage location: BNP PARIBAS LEASE GR Guedpfx Anszpgrie Isg

Condition: good (used), Year of construction: 2003, machine/vehicle number: 271537, functionality: fully functional, power: 14 kW (19.03 HP), input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, Equipment: documentation/manual, This machine was previously used in the Aptiv manufacturing plant. It has been professionally decommissioned, carefully disassembled, and securely packed in a wooden crate for safe transportation and storage. Godpfxjzi U Npo An Ijug

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000211, empty load weight: 7,707 kg, maximum load weight: 27,293 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 15,030 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 101 m³, total length: 15,350 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: silver, The images are archive photos; the vehicle may still be in use! Vehicle consists of: Chassis: Semi-trailer for freight forwarding Fine-grained steel welded construction in lightweight design up to the support legs, fifth wheel plate with replaceable 2" king pin 24 t, 2-speed landing gear, single-sided operation, with a straight bottom section Guedpfsy Snmpjx An Isg Rear extension ladder Side door holders 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mudflaps Foldable mudguard for the lighting assembly Quarter mudguards Rear impact protection Curtain pole with holder 1 plastic toolbox Axles & Suspension 3 BPW disc brake axles "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air brake system Color-coded line layout for easy service Spring-loaded parking brake Duomatic coupling EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system AAC Basic, automatic lift axle acting on the rear axle as maneuvering aid, up to 20 km/h, manually switchable Axle load detection via EBS-CAN bus signal Wheels and tires 385/55 R22.5, make at manufacturer’s discretion Electrics 24 volts, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to the indicator, 'flashing side marker lights' 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding mechanism built into the floor. 2-circuit hydraulic system. Forward/reverse switching is electric via wired remote control. Hydraulic operation via truck PTO Hydraulic connection with hose at the front wall and HDK screw connection Recommended pump performance: Displacement: 110 l/min Pressure: 250 bar Minimum oil tank volume: 100 l Floor boards made of aluminum, 8 mm ribbed profile Aluminum box body from high-quality, wear-resistant material. Front and side walls made of aluminum hollow profiles, top all round welded with a wide special reinforcement profile from aluminum Sliding wall for improved unloading of cargo, with reinforced curtain flaps at the bottom. Rear wall made of aluminum hollow profiles, as two-leaf door, split 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 external locking bars, locked at the top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left in the direction of travel. With swingable cross beam at the top. Standing platform with ladders on both sides 3 removable, swingable cross beams for tarpaulin support Roll tarp, can be stowed on one side, with 2 longitudinal tension straps, 3 side tensioning straps with ratchet Operating notices: Special permit required if overall train length exceeds 16,500 mm Country of registration / license plates: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) Warning panel 'Long truck' Long truck overall assessment Driver instruction at the Triptis plant for up to 4 persons per truck combination Paintwork: Frame: DB 7350 Nova Grey Body: Natural aluminum Roll tarp: RAL 7035 light grey

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 700 kg, warranty duration: 12 months, Precision & stability through robust construction. The static, dynamic, and rigid mechanical design ensures long-term operational stability with high performance. Linear glass scales in X, Y, and Z axes enable precise position detection and minimize measurement errors. Compact & rigid mechanical concept. The short C-frame design, combined with generously dimensioned cast components, guarantees mechanical stability and precision throughout the machine’s entire service life. Its high level of robustness absorbs all machining forces, ensuring a consistently accurate spark gap between workpiece and electrode. Godpfeyh Nf Usx An Ijug Key features at a glance: - Manual eroding with jog function via hand control and joystick functionality - High vibration damping due to sturdy cast construction - Maximum removal rates and accuracy for all material pairings - Low-wear final dimension tuning - Fully encapsulated, integrated measuring systems - Fully integrated work area lighting - Automatic centralized lubrication Technical data: - Height: approx. 2400 mm - Width: approx. 2410 mm - Depth: approx. 2270 mm - Weight without fluids: approx. 2800 kg - Table (L x W): 700 x 400 mm - Dielectric above table: 350 mm - Dielectric filters: 3 cartridge filters - Max. workpiece weight: 700 kg - Travel range X-Y: 400 x 300 mm - Travel range Z: 350 mm - Resolution X-Y-Z: 0.001 mm - Max. electrode weight: 50 kg - Dielectric capacity: 450 l - Required cooling capacity: 4.5 kW - Air flow rate: 10 l/min - Required air pressure: min. 6 bar - Electrode changer: 4-position

Condition: new, functionality: fully functional, mileage: 100 km, power: 368 kW (500.34 HP), gearing type: automatic, fuel type: electric, axle configuration: 8x4, first registration: 03/2026, Year of construction: 2026, operating hours: 10 h, Equipment: ABS, air conditioning, parking heater, traction control, New vehicle, model year 1985 Standard superstructure DINO Vario 12 m³ Volvo FH500 8x4-4 NLA vacuum tanker DINO Vario 12 m³ Standard equipment: MTS vacuum superstructures MTS twin-fan system (patented) MTS material separation system (patented) Automatic filter cleaning Compressed air compressor 4.5 m³/min, 8 bar POWERARM articulated boom with 7 m suction hose 3 stabilizer supports PLC control system with remote diagnostics Remote control Set of demolition and air release tools Documentation TÜV inspection Optional extras: Container with stainless steel lining MEGAARM articulated boom Rotating suction pipe system IKE/PERFOR Simultaneous suction, driving, and steering HYDROSTAT Full fairing DESIGN High-pressure water system 30 l/min, 160 bar, 500 l tank Full fairing DESIGN Electric steering Storage box made of stainless steel (max. 1,200 mm wide) 3-step access ladder under the hose rack 3-step access ladder (on both sides of the machinery housing) Industrial equipment: Stepless speed control for special models HBC radio remote control with display (2x radio with cable function) Gusdpfx Anjz Anrwo Ijg Accessories - lighting: Light package I: 3 LED lights on the vehicle frame Light package II: 2 LED lights on the central joint of the articulated boom Light package III: LED light strips in the tool box Light package V: LED lights next to the articulated boom shaft Light package VIII: Light bar on the cover (rear) New vehicle Errors and prior sale excepted. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: used, Year of construction: 1988, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 20992, Dear Mr. / Mrs., we have opportunity to offer you IPSEN VTTC-324 from 1988. Characteristic of vacuum furnace: Sn = 165 kVA Un = 400 V, 50Hz In = 240 A Useful dimension: 450mm x 600mm x 900mm Power of heaters = 120 kW Voltage of heaters = 43V, 50Hz Current of heaters = 1613 A Temperature range = 350 - 1320 C Absolute vacuum = 1 x 10e-5 (diffusion pump) Absolute pressure = 5 bar Gjdpfx Anewah R Rj Ieug Also, with furnace is coming lot of spare parts and equipment for thermal heating process (tank for gas, heaters, lot of controllers, chargers and everything). For all information that you need, please contact me.

Condition: new, Basic equipment and accessories10-year guarantee on the guide system of the saw carriage- Saw carriage with anodized aluminum profile guide made of hardened,ground and flanged steel guides- Saw carriage length 3200mm- "READY" electronic control, 2-axis control (3rd axis onrequest) with:- Height adjustment and inclination of the saw unit (control of therip fence on request)- Management of the tool data with automatic correction of theCutting height in relation to the angle of inclination of the saw blade- Manual, semi-automatic and automatic mode with 99storable work programs- Additional functions: calculator and hour meter- Trimming frame for quick positioning of the stopmiter cuts- Table extensions in the outlet- Cutting length at the rip fence 1270 mm- 2-axis control with 99 programsMotor 7kW 50Hz (8kW 60Hz)- Motor with direct connection with push buttons- Three main saw blade speeds- Scoring unit with independent motorization, externally adjustable andStops for easy saw blade positioningSecurity/Protection- Emergency stop button on the front- Emergency stop button on the side near the rip fence (Version CE)- Thermal protection switch- Saw blade swing protection (version CE) integrated suction, suction nozzlewith a diameter of 80 mm- Saw blade swing protection with integrated suction, suction nozzle with 80 mmdiameter- Automatic motor brake on the main saw blade (CE version)- Lockable main switch- 110 V auxiliary circuit- CE Declaration of Conformity (CE version)Technical specificationsMax cutting height at 90° (mm) 140 with blade 400Max cutting height at 45° (mm) 97 with blade 400Saw blade tilt (degrees) 45Programmed lifting and swiveling of the saw blade unitSaw blade speed (rpm) 3000- 4000- 5000Scorer speed (rpm) 8500Main engine power (S6 -40%) kW (hp) 50 Hz 7 (9.5)Scoring unit power (S6 -40%) kW (HP) 50 Hz 1.3 (1.7)Format cuts:- with trolley 1600 (mm) n.a.- with trolley 3200 (mm) 3200x3200Cutting width for parallel cuts (mm) 1270Suction nozzle diameter:- on frame (mm) 120- on the saw blade guard (mm) 80- on the riving knife (mm) n.a.Net weight base machine (kg) 1050109999 Execution according to safety regulationsR10078 nova si 400ep CE version930731 volts 400 EU931201 Frequency 50 Hz570343 Digital readout for rip fenceComplete with:- Digital display and magnetic tape570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star/delta switch kW9 HP12 Hz50 (kW11 HP15 Hz60)083202 base109993 MACHINE LANGUAGE: German Gjdpevxr Skofx An Ijug

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34202036640, empty load weight: 6,213 kg, maximum load weight: 35,787 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. ## Fliegl Thermo Semi-Tipper Trailer ### Chassis – Semi-Tipper Light Construction * Lightweight high-strength chassis construction * Fifth wheel plate with replaceable 2” king pin * Patented curved front end design ### Axles & Suspension * SAF disc brake axles with 430 mm brake discs * Laser-aligned axles and running gear for reduced tyre wear and improved fuel efficiency * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid ### Braking System * 24 V EBS electronic braking system with front EBS socket (without connecting cable) * External brake cylinder pressure test connection at EBS module * Raise-and-lower valve integrated * Trailer brake system electronically controlled via truck (no truck-side installation required) * Automatic tipping lowering function with shut-off valve * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via towing vehicle EBS system (truck preparation required, basic tyre equipment only) * Axle load detection via EBS CAN bus signal for display in the driver’s cabin (truck must be pre-equipped; no additional truck installation required) ### Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims ### Electrical System * LED side marker lights linked to indicators (flashing side lights) * 2 white LED front position lights * 2 white/red LED rear outline marker lights * LED work lights on both sides * 2 additional integrated LED rear work lights ### Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * Hard-chrome plated first stage piston rod * HDK screw coupling, fixed section, NW 48 mm * Without hose connection * Hydraulic operation via truck PTO (power take-off) ### Tipping Body – Thermo Asphalt Body * Steel round-body design in “Stone Master” specification made of high wear-resistant HB 400/450 steel * Sloped front wall with external hydraulic cylinder mounting * Internal ladder access at front wall * Aerodynamic “Greenline” tapered body design * “Membrane” tailgate with hydraulic rear door, large opening upwards, approx. 2,200 mm clearance height * Side walls: 5 mm continuous steel * Floor: 8 mm continuous steel * Fully insulated body (Fliegl Asphalt Profi Thermo system) * Insulation on front, sides, bottom and rear ### Cover System * “Flip Top” sliding tarpaulin system * Automatic rear closing as folding bow system * Tarpaulin moves forward to the front * Electrically driven system Gujdpfx Ansyylapo Iog * 7-pin front power socket (charging plug), no connecting cable included * No truck-side installation required * Operation via trailer control panel and remote control ### Operating Notes * For transporting salt, lime, and similar aggressive materials, a hydraulic cylinder with hard-chrome plated piston rod is recommended to prevent corrosion and wear * The stated total weight is technically possible; depending on payload distribution, the maximum permissible axle, drawbar, and fifth wheel loads may limit achievable payload * Incorrect load distribution may negatively affect driving stability and trailer tracking behaviour ### Paint Finish * Chassis: DB 7350 Nova Grey * 10-year anti-corrosion warranty against perforation rust * Landing gear: black coated * Tipping body: RAL 1007 daffodil yellow * Sliding tarpaulin: RAL 7038 agate grey

Condition: used, maximum load weight: 29,660 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2021, next inspection (TÜV): 12/2026, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,420 mm, total width: 2,550 mm, total height: 3,390 mm, Year of construction: 2021, Equipment: ABS, * Saddle height approx. 1270 mm * Foldable underrun protection * Towing hook at the rear * Camaro convertible top, electric drive with remote control * SAF axles, off-road version * Disc brakes, 430 mm diameter * Air suspension * 1st axle as a lift axle (automatic and can also be operated from the truck) * Lift axle with forced lowering and starting assist * Polished aluminum rims * LED lighting * Hydraulic system, low-pressure cylinder, 170 bar * Rear wall with hinged flap * Side wall, 4 mm thick, continuous * Floor, 4/5 mm thick * Dump body color: steel gray * Frame color: nova gray Gsdezvz Thepfx An Ieug * Support legs, galvanized * Aluminum ladder, 3300 mm with bracket * Broom and shovel including bracket on the front wall * SP 06.2027 * And more * Subject to errors, changes, and prior sale

Year of construction: 2021, operating hours: 500 h, condition: like new (used), functionality: fully functional, DLyte PRO500 Dry Electropolishing System – Complete Set – Only 500 Operating Hours For sale: DLyte PRO500 by GPAINNOVA, a complete dry electropolishing / surface finishing system. The machine is in excellent condition, almost like new, with only approximately 500 operating hours. It has been used in a clean production environment and is fully functional. The set can be inspected and tested at our factory before purchase. Included in the set: * DLyte PRO500 machine * SMC Thermo Chiller HRS150-AF-40 Gujdpfxeziln As An Ijg * Original workpiece holders / fixture system, as shown in the photos * Mobile holder trolley / storage system * Accessories, as shown in the photos Machine details: * Manufacturer: GPAINNOVA / DLyte * Model: PRO500 * Article No.: GP4012691 * Serial No.: 200300-000081 * Year: 10/2022 * Weight: approx. 1600 kg * Rated power: 25 kW * Voltage: 400 Vac, 3P + N + GND * Frequency: 50–60 Hz * Rated current: 35 A * Full-load current: 40 A * Air supply: 6–7 bar Chiller details: * Manufacturer: SMC * Model: HRS150-AF-40 * Year: 2023 * Cooling capacity: 5 kW * Power supply: 3-phase, 380–415 V, 50/60 Hz * Refrigerant: R410A * Weight: approx. 177 kg Condition: * Very low usage: approx. 500 operating hours * Excellent technical and visual condition * Ready for production * Tests can be performed at our factory before purchase Price: €250,000

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, rotational speed (max.): 18,000 rpm, workpiece width (max.): 410 mm, workpiece height (max.): 120 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gusdpfexw U Nxex An Ijg Maximum workpiece width: 410 mm Maximum cutting height: 120 mm Maximum speed: 18,000 rpm MACHINE DETAILS Installed total power: 5 kW Motor power: 4 kW Saw spindle: bottom EQUIPMENT CE marking

Year of construction: 2009, operating hours: 89,479 h, condition: good (used), functionality: fully functional, Grinding robot for machining forged or cast water fittings, operating air pressure 5.5-6 bar, Guedpezvn Tzefx An Isg operating voltage 400 V-50 Hz, rated current 13 A, rated power 8 kW, ongoing maintenance until 2026, extensive range of accessories.

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. The robot cell has been diemanteled, it is now a stand alone machine. Gsdpfezk U Rpjx An Ioug A bar feeder can be added. *

Condition: used, machine/vehicle number: WFDFLT21802036328, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 60 %, color: grey, Note: The images shown are archive photos. The vehicle may currently be in use! Tandem-Axle Swap Body Trailer Type TWP 180 Mega-EL WEIGHTS AND DIMENSIONS Gross vehicle weight: 18,000 kg Payload approx.: 14,800 kg Axle assembly load rating: 18,000 kg Support load (drawbar): 1,000 kg Unladen weight (base version) approx. only: 3,200 kg +/- manufacturing tolerance Frame height lowered approx.: 1,010 mm Frame height raised approx.: 1,390 mm Frame height in driving position approx.: 1,070 mm Parking height approx.: 1,040-1,320 mm Standard stop to front locking approx.: 985 mm Locking distance: 5,853 mm Coupling height approx.: 380 mm Parking heights apply on level ground. The towing vehicle must have a similar lift stroke to the trailer, otherwise the body will sit at an angle. CHASSIS - CENTRE-AXLE SWAP BODY TRAILER Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 twist locks with sturdy brackets, 20" base For 7.45 m swap bodies (Note: combined with the underrun protection, this projects beyond a 7.15 m swap body) 1 pair of geared landing legs front, straight foot, single-side operation on the right 1 pair of geared landing legs rear, straight foot, single-side operation on the right 2 wheel chocks with holder Gujdpfx Anozufl So Ieg Aluminium side underrun protection Steel rear underrun protection Rear mudflaps, full width (not combinable with forklift pocket holder) Half-shell mudguards Mudflaps DRAWBAR / TOWING GEAR (CENTRE-AXLE TRAILER) Drawbar with certified 50 mm towing eye, haulage version Adjustable drawbar coupling height, 2,200 mm Coupling height: 380 mm AXLES & SUSPENSION SAF disc brake axles Axles/running gear laser-aligned - reduces tyre wear and fuel consumption Air suspension BRAKING SYSTEM Two-line compressed-air braking system Colour-coded line routing for easy servicing Air reservoir capacity: 208 litres Spring-loaded parking brake 2 mismatch-proof coupling heads at front, with connecting lines to the tractor unit, connection on the right 24V EBS (electronic braking system) with EBS plug at front, connecting cable, connection on the right Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lowered and raised position WHEELS AND TYRES 445/45 R19.5", make at manufacturer's discretion Steel rims, factory silver ELECTRICS 24V multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red rear outline marker lights 2 x 7-pin mismatch-proof plugs at front, with connecting cable, connection on the right 2 additional LED work lights at the rear, activated via reversing light 1 LED work light front-centre between the beams, facing rearward, activated via reversing light REGISTRATION COUNTRY / PLATES Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape acc. to ECE R48, white on sides, red at rear PAINT Frame: DB 7350 Nova grey 10-year warranty against corrosion perforation

Condition: used, machine/vehicle number: WFDFLT21802036327, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,070 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 70 %, color: grey, Swap-Body Trailer Please note: the images shown are archive photos. #Chassis - Swap-Body Centre-Axle Trailer - Fine-grain steel welded construction - Front stop, longitudinally adjustable and foldable - 2 pairs of removable guide rollers, front and rear - 4 twist locks with sturdy brackets on a 20" base, for 7.45 m and 7.82 m swap bodies (note: combined with the underrun protection, this protrudes on a 7.15 m swap body) - 1 pair of geared landing legs front, with straight foot and single-side operation on the RHS (direction of travel) - 1 pair of geared landing legs rear, with straight foot and single-side operation on the RHS (direction of travel) - 2 wheel chocks with holder - Aluminium side impact protection - Steel rear underrun protection - Full-width rear mudflaps (not in combination with forklift pockets) - Half-shell mudguards - Mudflaps #Coupling Gear - Centre-Axle Trailer - Drawbar with certified 50 mm tow eye, haulage-specification version - Low-mounted drawbar coupling, 2200 mm - Coupling height: 380 mm #Axles and Suspension - SAF disc brake axles Gusdpfx Anszu Iv Hs Iog - Axles/chassis laser-aligned - reduces tyre wear and fuel consumption - Air suspension #Braking System - 2-line air braking system - Colour-coded pipework for easy servicing - Air reservoir capacity 208 litres - Spring-loaded parking brake - 2 anti-mismatch coupling heads at the front, with connecting lines to the towing vehicle, connection on the RHS - 24-volt EBS electronic braking system with EBS connector at the front, with connecting cable, connection on the RHS - Warning: this trailer must only be towed by towing vehicles that guarantee the effectiveness of the ABS! - With lift-and-lower valve, hold function in both lowered and raised positions #Wheels and Tyres - 445/45 R19.5" make of manufacturer's choice - Steel rims, factory silver #Electrics - 24-volt multi-chamber lights, yellow LED marker lights at the sides - 2 white front position lights - 2 white/red rear tail lights - 2 x 7-pin anti-mismatch connectors at the front, with connecting cable, connection on the RHS - LED work lights on both sides (switched via reversing light) - 2 additional LED work lights at the rear, switched via reversing light - 1 LED work light at the front, centred between the beams, facing rearward, switched via reversing light #Country of Registration / Plates - Germany - With Dekra inspection and certificate (in accordance with §13 EC-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective tape to ECE R 048, white at the sides and red at the rear #Paintwork - Frame: DB 7350 Nova Grey - 10-year warranty against corrosion perforation

Condition: good (used), machine/vehicle number: 3495, total length: 7,900 mm, total width: 2,810 mm, Year of construction: 2010, operation weight: 8,200 kg, load capacity: 120,000 kg, Novatech NOVATECH RT20-120T from Uniktruck Gjdpfxezvzh Ej An Ijug

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 9001522010300263, type of input current: three-phase, input voltage: 400 V, Widepower MKT 15K UPS - 15kVA/13.5kW, Three-Phase: Online double-conversion UPS, three-phase, up to 2 hours autonomy at 8kW load. AC input/output: 400V 3P+N+PE, 50Hz. DC bus: 240VDC. Purchased new in 2023 (original invoice available). Condition: Very good. Suitable for warehouses, small industrial facilities, server rooms, or technical rooms requiring three-phase backup power. Buyer should organise delivery. UPS Widepower MKT 15K - 15kVA/13,5kW, Trifásica: UPS online de dupla conversão, trifásica, com autonomia até 2 horas a 8kW de carga. Entrada/saída AC: 400V 3P+N+PE, 50Hz. Barramento DC: 240VDC. Adquirida nova em 2023 (fatura original disponível). Estado: Optimo. Ideal para armazéns, pequenas indústrias, salas de servidores ou salas técnicas que necessitem de alimentação trifásica de emergência. O comprador deve organizar/providenciar a recolha. Gsdszxtxbspfx An Ieug

Year of construction: 2024, operating hours: 200 h, condition: new, functionality: fully functional, Dear Mr./Mrs., company Planit have opportunity to offer you new plasma nitriding equipment. Equipment is new, our production, cold wall equipment, used in 10 batches just to be tested. Characteristics of equipment: - Dimension of equipment: 1400x800x2000 - Chamber dimension: D500x600 - Maximum dimension of work piece: D400x500 - Equipment has own lifting device Gsdpfx Anevfdv Io Isug - Dimension of electrical cabinet: 860x600x2000 - Power supply of equipment: 3x400V,50 Hz - Nominal power of equipment: 18 KW - Nominal power of plasma: 15KW, maximum current 38A, voltage 0-800 VDC - Pulse mode: 0-20kHz,unipolar,changable pulse and pause - Automatic control of arc - 3 gasses supply with MASS FLOW CONTROLLERS (technology of post oxidation) In addition to equipment, we also offer its installation, giving all technology (nitriding,post oxidation), technical documentation. Also, we are making equipment according to customer request.

Condition: excellent (used), Year of construction: 2025, operating hours: 3,700 h, functionality: fully functional, machine/vehicle number: 21220, total height: 1,310 mm, tank capacity: 450 l, usable tank capacity: 310 l, input voltage: 400 V, outer diameter: 1,480 mm, We offer this very well-maintained rotary vibrator RA21, manufactured in 2025. This rotary vibrator is a versatile finishing machine for deburring, rounding, and polishing parts. It offers high finishing performance, easy operation, and reliable processes. The rotary vibrator has a sloped container bottom, which reliably guides the workpieces to the integrated screening area. The large screening area with a tangential outlet ensures safe separation of workpieces and grinding media. An automatic washing system is installed, which automatically removes grinding dust from the parts. The cleaning centrifuge is used to process contaminated process fluids. These systems are characterized by their high cleaning performance and are equipped with a separate process water tank for dirty and clean water. If you have any questions or require further information, please feel free to send us a message or call us. Gedpfszgti Aex An Ioug