Used Technica Rotaflex Dv 25/15 for sale (29,354)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Pgsdpfsuxfu Nex Aazjt Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, This listing is for the Millipore Elix Advantage 15 Water Purification System The unit is in full working condition and is ready for immediate use Pgjdpfxex Tuctj Aazot The Elix Advantage 15 is a laboratory water purification system designed to generate Type II pure water directly from potable tap water using an advanced combination of purification technologies. It’s part of Millipore’s Elix series, which emphasizes reliable, continuous production with minimized maintenance needs.

Condition: good (used), functionality: fully functional, 315 mm and 250 mm chucks, with central adjustment and individual adjustment of the clamping jaws, Pjdpfxszz Amtj Aazogt

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 4,030 h, load capacity: 1,500 kg, lifting height: 3,000 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 1,970 mm, empty load weight: 3,100 kg, total length: 1,772 mm, drive type: Elektro, construction width: 1,060 mm, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Pgjdpfx Aezl Icusazst Mast type: Standard Technical condition: normal Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 48V Battery Ah: 500Ah Battery year of manufacture: 2025 Description: Thorough equipment cleaning, paint in orange, new seat cushion, new headrest, delivery including clamp or new side shifter, new inspection, new acceptance test according to FEM. 3rd valve, 4th valve, pulse control, CE certificate.

Condition: used, Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate with support ribs Psdpfx Aaokrgibezegt -Length: 2020mm -Width: 1250mm -Groove width: 25 mm -Total dimensions: 2020/1250/H315 mm -Weight: 2280 kg

Condition: refurbished (used), Year of construction: 2008, The wrist is new and has never been assembled. It was as a spare part for a paint shop with Fanuc robots. The new price at Fanuc is €18,000.00. Podoihb Axjpfx Aazsgt

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1500 mm plate height: 250 mm Pedpfxszcwr Ij Aazegt weight of the machine ca.: 4,6 t space requirements of the machine approx.: 4,0 x 1,5 x 0,25 m *

Condition: used, mileage: 10,616 km, power: 110 kW (149.56 HP), axle configuration: 4x2, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total width: 23,700 mm, total height: 28,500 mm, Year of construction: 2005, Equipment: ABS, EBS, For any inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (Tel. ...). MAN LE 8.150 4x2 Firefighting Vehicle Body: 2500 F, 2,500-liter foam tank, Schmitz: SLF 25/25, number of seats 3, manual transmission, cruise control, engine brake, ABS/ESP/ASR, PTO, halogen headlights, rotating beacons, 40 mm Rockinger coupling, tire tread: 1st axle 12-13 mm, 2nd axle 13-14 mm On request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. You can find more information on our homepage. ... Errors, changes, and prior sale reserved!!! Pedpfxey Ivq Uj Aazogt ESP Cab type: Short-haul = Further information = Engine displacement: 4,580 cc Gross vehicle weight: 8,600 kg Please contact Tobias Ebert for more information.

Condition: new, Year of construction: 2012, functionality: unexamined, machine/vehicle number: Modelo Y15V # de Serie C12070192, screw diameter: 22 mm, displacement volume: 36 cm³, injection pressure: 1,417 bar, injection weight: 44 g, ejector stroke: 200 mm, plate length: 240 mm, plate width: 200 mm, plate height: 40 mm, total length: 1,200 mm, total width: 1,200 mm, total height: 2,400 mm, overall weight: 700 kg, heating capacity: 2 kW (2.72 HP), power: 2.2 kW (2.99 HP), type of input current: AC, input frequency: 60 Hz, input voltage: 220 V, I am selling 3 Guan Ming Y-15 V machines and 1 Y-25V machine, all new from old inventory. They have been stored in their original packaging since they were received from China in 2012 and have never been put into production. There are 3 machines with a capacity of 15 tons and 1 machine with a capacity of 25 tons. Podpsz Aby Uofx Aazjgt The Y-15V machines have a 22 mm screw and a maximum injection capacity of 44 grams. The Y-25V machine has a 30 mm screw and a maximum injection capacity of 103 grams. All 4 machines are located in Tepotzotlán, State of Mexico. They are sold without molds, accessories, or spare parts. Price plus VAT. Loading, crane, maneuvering, insurance, and transportation are the responsibility of the buyer. The machines are sold subject to inspection and testing by the buyer. Payment must be made before the machine(s) are removed.

Condition: used, Year of construction: 2017, operating hours: 20,300 h, functionality: fully functional, overall weight: 350 kg, total length: 1,110 mm, total width: 800 mm, total height: 1,110 mm, power: 15 kW (20.39 HP), fuel type: electric, volume flow: 2,970 m³/h, operating pressure: 10 bar, noise level: 65 dB, protection type (IP code): IP55, ALUP Allegro 15 - 15 kW variable speed rotary screw compressor For sale: ALUP Allegro 15 industrial rotary screw compressor equipped with variable speed control. Thanks to frequency control, the compressor automatically adjusts its speed to the actual compressed air demand. This makes it an energy-efficient solution, especially for fluctuating compressed air usage. Specifications: Manufacturer: ALUP Model: Allegro 15 Power output: 15 kW Type: Rotary screw compressor Control system: Variable speed / frequency-controlled Pgjdpfx Aez Ahkmeazet Controller: ALUP Air Control 4 Condition: Good working order Professional industrial grade Asking price: €3,250 excl. VAT

Condition: used, Year of construction: 1990, Year of manufacture: Jun 1990 Pgedpfx Asxvx Nyoazjt OLD LOWLOADER TIRES.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: KHT, Steel / Stocker indoor crane, gantry crane, bridge crane, including steel structure + floor control Steel structure dimensions approx. length 15m x 9.5m width with 1 bridge crane 12500kg, lifting height 6m Payload/lifting capacity 12.5t System technical data: Crane runway/steel structure consisting of HEA/HEB180 girders, HEB240 guide rails Length of outer edge of steel structure approx. 15m Total width of outer edge (steel structure) approx. 9.53m Total crane height approx. 4.52m Top of guide rails approx. 3.99m Bottom of guide rails approx. 3.87m Top of bridge approx. 4.52m Bottom of bridge approx. 4.13m Hook height approx. 3.4m Track gauge approx. 6.23m Support spacing: left (2.65 + 4.44 + 4 + 3.5 m), right (4.6 + 4.9 + 4.9 m) System is delivered complete: Pgsdowgwrqjpfx Aazot Steel structure complete with conductor rail 1x bridge including travel drives 1x 12500 kg steel wire rope hoist SH 5032-25 4/1 1Am M4 lifting speed 1/6.3 m/min Crane is disassembled and immediately available The item is located in 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or pickup by appointment only

Condition: new, Year of construction: 2025, Decoiler RAZ-DV 1250/4 - up to 4,0 t stationary - with 5 clamping arms, ball bearings and with disc brakes Pjdov I Um Njpfx Aazegt - ecordable coil width: 1250 mm - Upper loading capacity: 3.000 kg - Downer loading capacity: 4.000kg

Condition: new, Year of construction: 2025, Decoiler RAZ-DV 1250/2 Pgodpev I Ur Eofx Aazet - up to 2,0 t stationary - with 4 clamping arms, ball bearings and with disc brakes - ecordable coil width: 1250 mm - Upper loading capacity: 2.000 kg - Downer loading capacity: 2.000kg

Condition: used, A Linck chipper canter line for continuous chipping, turning, profiling and sawing of round timber as well as for the production of main products and side boards is offered. 1) LINCK V30 chipper canter, feed speed: 50m/min/70m/min, drive power: 2 × 132kW, min. log diameter: 80mm, max. log diameter: 360mm, cutter heads: 18 chipping knives and 18 finishing knives, max. output: 1000fm/24h, 2) Linck DVN 55 turning device, function: turning and positioning of the preprocessed round timber between the chipper canter stages, 3) Linck V25 chipper canter, max. feed speed: 70m/min, drive power: 2 × 132kW, cutter heads: 18 chipping knives and 18 finishing knives, 4) Linck VPP 34 profiling unit, three-phase motors: 4, power: 32kW/50kW, speed: 1000rpm/1500rpm, feed: 4 geared motors, feed motor power: 1.3kW/2kW, max. feed motor speed: 66rpm, function: profiling of the side boards before the sawing process, 5) Linck VS 66 saw unit, three-phase motors: 4, power: 66kW/motor, speed: 3000rpm, fixed saw spacing: 24mm for 4 side boards. The chipper canter line will be available from January 2027. An on-site inspection is possible. Pgsdpfxszvy Eio Aazjt

Condition: used, Year of construction: 2017, operating hours: 4,168 h, lifting height: 4,250 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich EFG 215 electric forklift, year of manufacture: 2017, battery from week 32/2024, operating hours: only 4,168 hours! Previous owner: German Armed Forces. Rated load capacity: 1,500 kg. Lift height: 4,250 mm. Fork length: 1,000 mm. Sideshift, triplex mast with full free lift, in good condition and immediately ready for use. On request, we will be happy to provide you with a leasing or financing offer. Mr. Mihm (phone) will be pleased to assist you. Further information is available on our website. Subject to error and prior sale. Pgjdpfx Aajy Tth Ijzst Overhead guard = Further Information = Lifting capacity: 1,500 kg Overall height: 200 cm Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2017, operating hours: 3,092 h, lifting height: 4,250 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich EFG 215 electric forklift, year of manufacture: 2017, hours: only 3,092h, previous owner: German Armed Forces, rated capacity: 1,500 kg, lift height: 4,250 mm, fork length: 1,000 mm, sideshift, triplex mast with free lift, cabin with PVC door, good condition, immediately operational! On request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ...) will be happy to assist you. Further information can be found on our website. Subject to prior sale and errors excepted. Protective roof = Further information = Lifting capacity: 1,500 kg Overall height: 199 cm Please contact Tobias Ebert for further information. Pgsdpfjy Ttirjx Aazet

Condition: good (used), Year of construction: 2015, operating hours: 1,906 h, lifting height: 3,900 mm, free lift: 140 mm, fuel type: diesel, mast type: triplex, power: 36 kW (48.95 HP), motor manufacturer: Kubota 2.4L, gearing type: hydrostat, fork length: 1,000 mm, Weights Empty weight: 5.220 kg Functional Lifting capacity: 2.500 kg Maximum passing height: 216 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Supercushion Front tyre size: 7.00 x 12 -12 Rear tyre size: 7.00 x 12 -12 Fork carriage: Sideshifter Production country: US Additional information Please contact Sales Department Collé Sittard for more information Pgsdpfxsxct Taj Aazst = Additional options and accessories = - Pneumatic tyres

Condition: used, Year of construction: 2017, operating hours: 3,298 h, lifting height: 4,250 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich EFG 215 electric forklift, year of manufacture: 2017, operating hours: only 3,298 h! Previous owner: German Armed Forces. Rated load capacity: 1,500 kg. Lift height: 4,250 mm. Fork length: 1,000 mm. Equipped with sideshift, triplex mast with full free lift, cabin with PVC door. Battery: 10/2017. Good condition, immediately ready for operation! Upon request, we can provide a leasing or financing offer. Mr. Mihm (phone) will be pleased to assist you. Further information can be found on our website. Subject to errors and prior sale! Psdpsy Ttkiefx Aazegt Protective roof = Additional information = Lifting capacity: 1,500 kg Overall height: 200 cm Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2017, operating hours: 2,865 h, lifting height: 4,250 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich EFG 215 electric forklift, year of manufacture: 2017, hours: only 2,865 h, previous owner: German Armed Forces, rated load capacity: 1,500 kg, lift height: 4,250 mm, fork length: 1,200 mm, sideshift, triplex mast with full free lift, cabin with PVC door, battery dated 10/2017, in good condition, immediately ready for use. Leasing or financing options available upon request. Mr. Mihm (Tel.) will be happy to assist you. For more details, please visit our website. Subject to prior sale and errors excepted. Cabin, rental possible Psdpoy Ttilefx Aazsgt = Further information = Lifting capacity: 1,500 kg Overall height: 198 cm Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2017, operating hours: 2,819 h, lifting height: 4,250 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich EFG 215 electric forklift, year of manufacture: 2017, operating hours: only 2,819h! Previous owner: German Armed Forces. Rated load capacity: 1,500 kg. Lifting height: 4,250 mm. Fork length: 1,200 mm. Equipped with sideshift, triplex mast with full free lift, and cabin with PVC door. Battery dated 09/2017. Good condition, immediately ready for use! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale. Protective roof = Further Information = Lifting capacity: 1,500 kg Psdpsy Ttifefx Aazjgt Overall height: 199 cm For further information, please contact Tobias Ebert.

Condition: used, functionality: fully functional, machine/vehicle number: 33098, mileage: 59,900 km, power: 315 kW (428.28 HP), first registration: 08/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Chassis design for ADR, ADR type class EX/II including AT, weight variant 28 t, engine OM471, secondary water retarder, regulated water pump, transmission oil cooler, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, transmission lock for auxiliary drive, daytime running lights, rain sensor, light sensor, AHK Ringfeder (D40), tires: front axle/rear axle 385/65R22.5, drive axle 315/80R22.5 Pgsdoz Haruopfx Aazet M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), multimedia cockpit, tinted windshield, sunroof, electric windows, comfort central locking system, driver comfort air-suspended seat, co-driver functional seat, multifunction steering wheel, reversing warning system combined with hazard warning lights, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 24 V socket in the co-driver footwell, circuit breaker, pre-wiring for toll collection, air conditioning, cruise control, refrigerator on engine tunnel, attention assist, turning assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor Extension cylinder, total volume 15 m³, usable volume consisting of approximately 1 m³ fresh water tank and approximately 12 m³ sludge tank, tank wall thickness 6 mm, tank emptying by pushing using the extension cylinder, free discharge or by pressing with the vacuum pump, bottom flap to be opened hydraulically upwards over the entire cross-section, hydraulic latch, sealing of the closure base in NBR, lower and upper suction connection with Perrot DN 100 and with pneumatically operated sliding gate valve, sludge tank level indicator with float and external scale (graduation every 500 L), sight glass for water tank, discharge apron made of stainless steel, vacuum pump CVS RSW 1600 R (1600 m³/h) hydraulically driven, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, HD pump Pratissoli KT30 (approx. 80 l/min at max 175 bar) hydraulically driven, stepless pressure control, small hydraulic HD hose reel with approx. 40 m HD hose DN 13 and spray gun (with swivel joint), suction hose boxes on the right and left made of stainless steel, waste container mounted on the rear left galvanized, lockable tool box on the right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted on the rear right, radio remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/discharge, transport hose reel up/down, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, transport hose reel hydraulically driven, galvanized with approx. 40 m suction hose in DN 80, speed for unwinding/winding up can be adjusted steplessly, 5x LED work lights (2 on each side and 1 at the rear). 1x rotating beacon at the rear, reversing camera, trailer suction line, trailer hydraulics

Condition: used, Year of construction: 2017, operating hours: 4,029 h, lifting height: 4,250 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich EFG 215 electric forklift, year of manufacture: 2017, operating hours: only 4,029 hours! Previous owner: German Armed Forces. Rated load capacity: 1,500 kg, lift height: 4,250 mm, fork length: 1,200 mm, side shifter, triplex mast with full free lift, onboard scale with printer, cab, weight: 3,290 kg. Good condition, immediately ready for use! We can provide a tailored leasing or financing offer upon request. Mr. Mihm (tel.) will be happy to assist you. For further information, please visit our website. Subject to prior sale and errors excepted. Power steering, cab, rental option available. Podpsy Tthhsfx Aazjgt = Additional information = Lifting capacity: 1,500 kg Overall height: 200 cm Please contact Tobias Ebert for further information.

Condition: used, A package of six injection moulds for the series production of office organization products is available. The molds can be used to manufacture nestable filing trays, PET filing trays A4-C4, high-gloss and matte PS filing trays, a frame for a 3-tier filing tray unit, and a PET desk organizer. Materials processed: PET, recycled PET and PS. Mold numbers: W23630, W23635, W61014F2, W61015F5, W61019 and W62539. Mold dimensions depending on the mold: 397-570mm × 396-820mm × 369-637mm. Mold weights where documented: 450-1450kg. Average cycle times: 24.4-43.2s. Machine classes previously used where documented: 250t, 275t and 380t. According to the available documentation, the molds are in good condition. W61019 is used exclusively to manufacture the frame for the 3-tier filing tray unit. The molds are sold as a complete package. An on-site inspection of the molds is possible by arrangement. Pgodpszyq S Uofx Aazst

Year of construction: 2012, condition: as good as new (ex-display), 2nd hand Fill and seal machine, VI-500 - Format : True Quad (Stabilo) bag wide, 200 mm breit x 100 deep, the machine was never in use in consequence the machine has zero working hours Also for sale: fill and seal machine - VI-250 - Format : 50 mm wide Psdpfx Asff Hucsazogt