Used Teknohaus Plasma Cutting Machine for sale (65,859)

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for Rcedpevpalaofx Adzob bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: used, MicroStep MG 18001.30 PraG Dimensions: 18,000 x 3,000 mm 1x plasma rotator: renewed in 2022 1x straight oxy-fuel torch Hypertherm HPR 260XD plasma source Excluding filter unit Rsdpfx Adoytga Njzjcb

Condition: ready for operation (used), Year of construction: 2021, This ESAB Suprarex HD 4000 plasma cutting machine was manufactured in 2021. It features a track width of 4000 mm and a track length of 12000 mm, supporting a maximum working length of 9000 mm. The machine is equipped for both oxyfuel and plasma cutting, handling material thicknesses up to 200 mm. If you are looking to get high-quality cutting capabilities, consider the ESAB Suprarex HD 4000 machine we have for sale. Contact us for more information. Rcsdpfx Asx D D N Ujdzjb Application Types Cutting

Condition: good (used), Year of construction: 2008, functionality: fully functional, Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Cuts mild steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. Rodpfowinpxjx Adzjcb The machine can be inspected under power in Vilnius.

Condition: good (used), MicroStep SPL-PA Plasma Cutting System with Extraction and Compressor Technology Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Machine type: CNC plasma cutting system Rcjdoyvd Uispfx Adzob CNC control: iMSNC Design: gantry construction with linear guides Extraction unit: Donaldson Torit DCE Electrical connection (extraction unit): 400 Volt Motor power (extraction unit): 7.5 kW Compressed air generation: screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE certification: available Location: Waltenhofen, Germany Dismantling and loading by the seller included.

Condition: used, Plasma cutter CLOOS type CPS 40/80 Year of manufacture 1990 Power at 60 % ED 80 Amp. Rodpfx Asdzqccodzecb Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Rjdpfxsdzqa He Adzecb Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Aventa PLUS 4 x 2, type of input current: DC, working range: 40,002,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, cutting current: 300 A, Equipment: documentation/manual, Macchina in operazione Rodpfow Al Rmex Adzjcb

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: RoboRail, type of input current: three-phase, working range: 12,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, overall weight: 6,500 kg, input voltage: 400 V, total width: 3,200 mm, total height: 2,600 mm, total length: 20,000 mm, workpiece weight (max.): 550 kg, table length: 12,500 mm, cutting current: 125 A, working length: 12,500 mm, height adjustment type: mechanical, input frequency: 50 Hz, ambient temperature (max.): 45 °C, RoboRail: All-in-one Robot Plasma Cutting Machine We regularly hear from manufacturers that automation is not for them because everything they do is different, but that is precisely what makes automation so important! With the RoboRail, each individual part can be different and the plasma cutting machine will cut and deliver the parts 1-for-1, directly from the CAD files. Does your project require complex cuts? Send it to the RoboRail. Does your project require a wide variety of delivered profiles? Send it to the RoboRail! This machine will become the workhorse of your factory, giving you time to focus on what your company does best! Easy design input: Import files from SDS2, Tekla, or a Solid model. Or simply draw your design on the machine work surface. Optimal material usage: No more waste with HGG-optimized nesting. The more files you upload, the smarter the nesting process becomes. Rsdpfx Adjq Nz Skszecb Seamless processing: Upload your file and RoboRail takes over. Automatic loading of material and accurate determination of starting point. No need for operator intervention during the cutting process. Perfect results, every time: Get flawless cut steel, exactly matching your CAD design. Experience uninterrupted production with seamless repetition. RoboRail ensures readiness for the next production step. This machine is available in several configurations, including variants with different maximum material feed lengths. Based on your selected configuration, we can provide you with an appropriate price proposal. Please refer to our brochure for a complete listing of available options. If you have further questions, please do not hesitate to contact us!

Condition: good (used), Plasma cutting machine, plasma cutter for plasma cutting system -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF -Dimensions: 295/175/H370 mm Rcodpfxewpg I To Adzsb -Weight: 9.9 kg

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Rcjdpjyug Enjfx Adzjb

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 286.001.911.20, working width: 3,000 mm, working length: 6,000 mm, controller model: Global Control S mit 15 Zoll Farb-Touchscreen, No minimum bid – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 6,000 mm Number of cutting torches: 2 Gas flow regulation: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA ATTENTION: The Zinser cutting bed is not included in the offer! Rcsdpfx Adeyi Ub Hszsb EQUIPMENT according to the original invoice – details provided without guarantee Joystick and handwheel for Global Control S panel Cooling system for the control cabinet Laser diode Heat shield plate without air cooling Track for double-sided longitudinal drive HEB 9 m OmniFlow oxy-fuel supply up to 70 m³/h ALFA machine cutting torch with internal ignition SmartLifter 200 SensoMat ARKI Full gas addressability Light barrier systems Safety device: wheel arch foot switch Energy supply via 9 m energy chain for oxy-fuel Drag chain driver Further technical data from the manufacturer – details provided without guarantee: Track gauge: 4,000 mm Chain height: 500 mm Positioning speed: 50 m/min Operating speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg

Condition: used, Year of construction: 2004, Sato cutting machine for sale Rcedevx N I Njpfx Adzeb

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Rsdpfx Asv I U Hcedzjcb Sold without cutting table.

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Compressed air connection approx. 6 bar - with pressure reducer Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Rcjdpfx Adjxciumezob Weight approx. 50 kg Good condition

Condition: new, Titan DrillCut – Flexible Cutting and Drilling Center for Maximum Efficiency The Titan DrillCut is a powerful CNC machining center that combines thermal cutting (plasma or oxy-fuel) with precise drilling and thread cutting in one machine. The robust gantry design ensures vibration-free processing even with heavy material thicknesses up to 200 mm. Equipped with the integrated VarioDrill system, it allows for efficient, non-hardening machining of holes from Ø 6 to 40 mm as well as thread cutting from M4 to M20. An automatic tool changer enables rapid switching between drilling, countersinking, and threading – ideal for automated production processes. Rcsdpfefz A I Eex Adzsb This machine is the perfect solution for steel construction, mechanical engineering, and industrial metalworking, where utmost precision, flexibility, and production speed are essential.

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, cutting current: 260 A, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: double-sided, We offer this used Ajan PP15088 AUTO plasma cutting machine, year of construction 2015. Working area: 2000 x 6000 mm Rodjy Annbjpfx Adzjcb Machine type: PP15088 AUTO Construction year: 2015 Input voltage: 380 V Phases: 3 Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Rcedperi Skajfx Adzsb

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 80 mm, table length: 6,000 mm, working width: 3,000 mm, table width: 3,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, Equipment: documentation/manual, CNC Plasma Cutting Machine 6000x3000 mm – Messer MetalMaster Xcel 6030 – Hypertherm XPR300 – Bevel Head CNC Plasma Cutting Machine Messer MetalMaster Xcel 6030 General Information • Manufacturer: Messer Cutting Systems year of manufacturing 2020 • Model: MetalMaster Xcel 6030 • Machine Type: CNC Plasma Cutting Table • Condition: Used – good working condition • Availability: Immediate available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and high-speed cutting of carbon steel, stainless steel, and aluminum. Rsdpjyx Svbofx Adzecb Equipment / Options • Bevel cutting unit: BEVEL-R (5-axis bevel cutting system) for weld preparation and angled cuts • Software: OmniWin – programming and nesting software for optimized material usage Dust extraction system • BEUTING PFM3-9 (100 L extraction unit Machine Advantages • Robust industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts • Efficient nesting and programming via OmniWin software • Suitable for heavy steel fabrication and industrial production Applications • Structural steel fabrication • Industrial metal cutting • Manufacturing of machine components and steel constructions Additional Information Sold as it is dismantling and shipping not included. Machine can be inspected under power by appointment. Further technical details, photos, and videos available on request.

Condition: used, Year of construction: 2009, machine/vehicle number: 725, ECKERT plasma-gas cutting machine - JANTAR 2 Parameters: Rcjdpfxeqntkie Adzsb Working width 2500 mm Working length 6000 mm Positioning accuracy +/- 0,005mm Thickness of plasma cutting - 35 mm Thickness of torch cutting - 120 mm Max thickness of sheet metal/cutting max 120 mm

Condition: new, Plasma cutter Erfi PS990 Manufacturer: Erfi Type: PS990 Rodpsxwmb Tsfx Adzocb Plasma cutting machine ERFI PS990 - powerful, single-stage plasma cutter. Up to 20mm clean cut in steel, up to 25mm separating cut. Contact-free ignition by HF-ignition also on paint and rust by pilot arc. Includes 6m torch, standard filter and integrated pressure reducer with pressure gauge. The ERFI devices are produced with the utmost care in Germany - that is why ERFI always gives a guarantee of 3 years - without restriction. Technical data: Mains voltage 3x400V Frequency 50Hz Fuse protection 32A slow-blow Cutting current 60A level 1/ 90A level 2 Air pressure 6-10bar Weight 105kg Available immediately. For collection by the customer. Forklift available. Shipping also possible Subject to errors and prior sale

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, sheet thickness (max.): 38 mm, overall weight: 3,500 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Cutting range for steel: 1–38 mm X-axis travel: 3,000 mm Y-axis travel: 1,500 mm MACHINE DETAILS Rcjdpfex I Ehpjx Adzob Cutting medium: HiFocus 161i Control system: MicroStep Total power requirement: 6 kA Machine weight: approx. 3,500 kg EQUIPMENT Kjellberg plasma power source HiFocus Plus 161i

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3700x2400x1470 mm Rcedpfjvz E A Iox Adzeb Weight 1500 kg Total power requirement 8,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3200x1960x1470 mm Rcjdsvz E Azopfx Adzjb Weight 1000 kg Total power requirement 8,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3200x1960x1470 mm Weight 1000 kg Total power requirement 8,5 kw Rcodevz E Aujpfx Adzob