Used Thomas Typ 8 Spezial for sale (37,436)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable king pins and 2 king pin positions Container receptacles: Included Rear extension retracted: 1 x 20 ft, flush with the rear, note: low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with gooseneck tunnel and rear overhang Without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. Plug adapter for front locking, to secure containers without a tunnel from below, with bracket when not in use Rear extension on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underride protection Extendable underride protection for 45 ft containers Half-shell fenders, included with anti-spray flaps according to EC regulations Rear impact guard Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons total train weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line compressed air braking system Color-coded lines for easy servicing 200 spring-loaded parking brake 2 keyed coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with raising and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! In some towing vehicles, false diagnoses may occur, even though the function is working) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole keyed sockets at the front, without connecting cable Operating Instructions When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from king pin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underride protection must be manually extended! An exemption permit according to § 70 StVZo is required! Registration Country/Signs Germany with DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder 390 contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Lhodpei Ri Eqefx Ac Aeh Painting Frame hot-dip galvanized including passivation 15-year warranty against rusting Support legs black coated

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Lhsdoi Rizuepfx Ac Aoh Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-spray flaps according to EG Rear impact protection Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport), up to 44 tons gross vehicle weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, the truck must be appropriately prepared Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front Operating Instructions Special permit required if the overall train length exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / Signage Germany Type approval according to EG 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape

Condition: good (used), Year of construction: 2022, Heating oil tank, 27,000 liters for heating oil/diesel – used - : Price: only €9,950 (net), ex location, emptied, cleaned and including loading! Manufacturer: Kampitz Manufacturer number: 42089 Year of manufacture: 2022 Type: Z 38 12-312 Volume at permissible fill level: 27.82 m³ Ledpfjy I Ry Dox Ac Aohh Permissible filling degree: 95% Material (inside and outside): S 235JR Hazard class: FP > 55°C Permissible density: 1.0 kg/ltr. Test pressure storage area: 2.60 mWs Test pressure leak monitoring area: -0.60 bar Max. medium temperature: 50°C Medium: heating oil / diesel Condition: good Available: immediately Location: Bünde, NRW

Condition: good (used), 1. DEMAG drum brake Type: TH806/60 - RT315 TH806 1 piece available. 2. ELDRO electrohydraulic lifting device Ed 1250/60 Lhodju Uvmfspfx Ac Aeh

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Lsdjza Aiyspfx Ac Aehh Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: used, Year of construction: 1974, machine/vehicle number: 4139, functionality: fully functional, pressing force: 80 t, stroke length: 140 mm, table width: 530 mm, table length: 750 mm, ram plate width: 335 mm, ram plate length: 440 mm, Equipment: documentation/manual, For sale is a robust eccentric press from Beutler Maschinenbau with approximately 80 tons of pressing force. The machine is ideally suited for punching and forming operations. Specifications: • Table area: approx. 750 x 530 mm • Ram area: approx. 440 x 335 mm • Ram adjustment: approx. 150 mm Ledezb Eaqspfx Ac Aohh • Stroke: adjustable from 20 – 140 mm • Max. installation height: approx. 320 mm • Table opening: approx. Ø 230 mm Sold without warranty, ex works. The machine will be delivered without electrical power and compressed air connection. Payment before collection.

Condition: reconditioned (used), Year of construction: 2009, machine/vehicle number: SN FX036084, functionality: fully functional, 12 months warranty, in-stock item, immediately available, in top condition. Resistance-heated system with a gas-tight furnace chamber suitable for hardening, soldering, sintering, annealing, ashing, and preheating. -Tmax 800°C -Rod program controller SE-402 -3-zone heating -Gas purging system -Max. gas operating pressure 7 mbar -Gas circulation -Gas purging system, vacuum-tight -Gas purging system -Vacuum system -Note: no safety package installed! Ljdpfjyxlwrsx Ac Aehh -Internal chamber dimensions WxDxH 580x830x1500 mm (special length) -Chamber volume approx. 722 liters -Max. load weight approx. 1000 kg -Two-stage rapid cooling with frequency converter -Burner with flame monitoring -Automatic shutdown / emergency purging in case of flame failure, but not in case of power failure! -Sight glass DN150 -Max. gas operating pressure 7 mbar -Power supply 400V, 3 phases, N, PE -Heating power 70 kVA -Rated current 3x97A -Weight 1900 kg -External furnace dimensions WxHxD 1700x1950x2750 mm -Control cabinet dimensions WxDxH 510x1360x500 mm -Operating manual, wiring diagrams, CE declaration The furnace is offered as a refurbished unit. Electrically tested, including measurement reports. Inspection in our warehouse by appointment! Not suitable for gas nitriding with NH2/ammonia! Furnace, industrial furnace, melting furnace, annealing furnace, heat treatment furnace, sintering furnace, protective gas furnace, stress-relieving furnace, hardening furnace, chamber furnace, brazing furnace, debinding furnace, dewaxing furnace, relaxation furnace, vacuum furnace, protective gas furnace.

Condition: used, mileage: 316,939 km, power: 132 kW (179.47 HP), first registration: 08/2010, overall weight: 8,600 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, parking heater, Body: - Küpper Weisser spreader - Model: STASF VES, year 2010 - ThermoMAT - Suitable for oil spill control - Storage boxes Equipment: - Cab: C (Compact) - Driver and passenger comfort seats, air-suspended - Automatic climate control - Additional air heater Eberspächer Airtronic D2 Ledpfx Acswmx Aqo Aehh - Mechanical sunroof - Flame start system - Fuel tank: 200 L - 6-speed manual transmission Technology: - Rear-view camera - On-board computer MAN-Tronic - Electrically adjustable and heated exterior mirrors - Electric windows - ETA circuit breaker - Beacon lights Safety/Environment: - Rear axle differential lock - Engine brake - Electronic braking system MAN-Brakematic - Rear axle stabilizer - EURO 5 engine Miscellaneous: - German first delivery - 1 previous owner - Engine 4.6 L – 132 kW Diesel - Registration: previously self-propelled working machine 'traffic safety vehicle' - Payload 2,785 kg according to registration certificate - Perm. total weight 8.60 t Since 1972, your reliable partner for all automotive and commercial vehicle needs in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always keeps approx. 200 vehicles in stock, including transporters, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide you with an individual offer! Trade-in of your commercial vehicle/construction equipment is welcome. If a new TÜV inspection is desired, we will gladly offer you this service through our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your 'new' commercial vehicle can be arranged nationwide by our external partners at an additional cost. All information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical errors and data transmission mistakes. Listed equipment features may need to be verified separately. Subject to errors and prior sale.

Condition: used, Year of construction: 2017, machine/vehicle number: EB70(QB)038, overall weight: 6,000 kg, Equipment: documentation/manual, POWERJET EB70U85S4 – 4-head, 2-station blow molding machine, 2016/2017 We offer for sale a fully automatic POWERJET EB70U85S4 blow molding machine. The machine is designed for the production of plastic products using the blow molding method. Thanks to its four-head design and two workstations, it provides high productivity and stable operation. Technical data: Manufacturer: POWERJET Model: EB70U85S4 Year of manufacture: 2016 / 2017 Design: 4-head, 2-station Automatic control Output: approximately 1700 pieces/hour Very good technical condition Machine used seasonally, for a few months per year Possibility to inspect during operation Included: complete set of 140/56 molds complete set of 180/56 molds technical documentation The machine is ready for operation and requires no additional investment. It is ideally suited for the production of containers and plastic components. It is possible to view the machine after prior arrangement of a date. For more information, please contact us by phone. Contact phone: 502 370 499 Price: 56,900 EUR Lhsdpfjxlrc Sjx Ac Aeh

Condition: like new (used), Year of construction: 2019, operating hours: 39 h, functionality: fully functional, machine/vehicle number: MZ-7321/19 / 11024, total height: 2,198 mm, total width: 1,648 mm, total length: 3,500 mm, overall weight: 3,500 kg, rotor diameter: 400 mm, rotor width: 850 mm, type of input current: AC, input voltage: 400 V, rotational speed (max.): 100 rpm, power: 30 kW (40.79 HP), As-new single-shaft shredder / size reduction system with minor signs of use. Used solely for testing purposes. The rotor shaft is equipped with a heavy-duty wear protection. Cassette system for rotor knives, 34 x 34 mm. Electric motor 30 kW, total installed power 37 kW, hydraulic power 3.75 kW, 400 V, 3-phase. Additional new rotor and stator knives included as spare parts. German operating manual. Three-part, adjustable stator knives. Hopper lockable, perforated screen 40 mm. The machine can be demonstrated under power. No warranty after purchase. Free loading from factory premises – Raesfeld. Detailed photos available on request. Subject to prior sale. Prices are net prices. Lhedpfxey E S S As Ac Ash

Condition: excellent (used), Demag crane P-Zug 3.2 t – Type P208H11, four-strand, with fast and precision lifting. Length: 1150 mm, height: 350 mm, width: 330 mm. Lhedpsyxbxxsfx Ac Aoh

Year of construction: 2012, condition: excellent (used), Manufacturer: Interroll Year of manufacture: 2012 Belt width: 800mm Tape length: 800mm Adjustable legs. Height: 800-900mm Speed: 30m/min Lhedol Raibopfx Ac Ash

Condition: good (used), Roller conveyor, conveyor belt, roller track -Roller width: 700 mm Lhodpeb Rr S Hsfx Ac Aoh -Conveyor length: 5020 mm -Roller diameter: 80 mm -Axle spacing: 100 mm -driven: via belt -Geared motor: 0.55 kW -Speed: 12.6 m/min -Number: 1x roller conveyor available Price: per piece -Dimensions: 5380/1050/H450 mm -Weight: 450 kg

Condition: used, Henninger high-speed milling spindle SK 40 Type 801 H580 Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. +60°C with tools over: ø 12 mm without collets Lodpfxevygzio Ac Aohh

Condition: used, enninger high-speed milling spindle SK40 Type 801 M326 Lhodpfx Acovyg A Ts Aoh Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm without collets

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, perforated plate Ledpsb A Nbnjfx Ac Aehh -Dimensions: 2280/1060/40 mm -Table height: 960 mm -with supporting ribs -Cast iron plate -Weight: 1050 kg

Year of construction: 1991, condition: good (used), AS crane hooks, frame formwork, pipe slings, shaft ring slings Lhsdpfsdi Smdex Ac Ash -Load capacity: 1000 kg -Number: 3 claws present -Price: per piece -Weight: 13 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Handover in its current condition as inspected Lhsdpfx Acectla Is Aoh -Mouth size: Ø 500 mm -one threaded insert is missing -all 4 cheeks are missing -Cone: Ø 105 mm -Through hole: Ø 80 mm -Bolt circle: Ø 132 mm -Weight: 45 kg

Condition: excellent (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines Lhodpfx Aeb A I Iyec Ajh -Drum: Ø 199 mm -Drum length: 384 mm -Speed: 2800 rpm -Power: 2.2 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 67 kg

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -with adjustable baffle -Roll width: 990 mm Lsdjb Rypajpfx Ac Aohh -Conveying length: 4800 mm -Diameter roller: 85 mm -Center distance: 155 mm -Height: mm -driven: via gearbox -Geared motor: kW -Speed: m/min -Dimensions: 4900/1350/H1100 mm -Weight: 1190 kg

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roll width: 805 mm -Conveying length: 3200 mm -Diameter roller: 90 mm -Center distance: 200 mm -Height: 280 mm -driven: via sprockets -Geared motor: 0.37 kW -Speed: 10.8 m/min -Number: 1x roller conveyors available Lhedpfx Asca Iaksc Aeh -Price: per piece -Dimensions: 3200/920/H280 mm -Weight: 362 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle for workpiece clamping Lhedpfxjb A I Igo Ac Aeh -Dimensions: W380/H355/L360 mm -Surface: milled -Weight: 50 kg

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink Lodjb Uhm Hjpfx Ac Ashh -Interior dimensions: 420 mm -Depth: 180 mm -Edge: 18 mm -Drain: Ø 54 mm -Number: 2x available -Price: per piece -Dimensions: 460/H180 mm -Weight: 2.5 kg

Condition: good (used), Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 390 x 285 mm -Depth: 120 mm -Drain: Ø 52 mm Lhodpfx Acjb Uhm Io Ajh -Faucet: Ø 28 mm -Dimensions: 495/350/H130 mm -Weight: 2.4 kg

Condition: good (used), Aluminum table, aluminum work table -Material: Aluminum -1x baseboard -2x plastic worktops -Dimensions: 1210/2010/H800 mm -Weight: 70 kg Lsdpfx Asb Rgyqsc Ajhh