Used Ticab Asphalt Recycler for sale (2,694)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2012 1140, total width: 1,700 mm, total height: 1,500 mm, total length: 1,200 mm, empty load weight: 500 kg, Equipment: dust extraction, No minimum price – guaranteed sale to the highest bidder! For sale is a machine set consisting of a briquetting press and a dust extraction system! MACHINE DETAILS Transport packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,700 x 1,500 mm Unladen weight: 500 kg EQUIPMENT Briquetting press Dust extraction system Pjdpfx Asz Eaw Ueazegt

Condition: excellent (used), Year of construction: 2020, Used MS Sand Plant Year 2020 Made In France Pgsdpfx Aaozx Hruszst Consists Of 2 x Dewatering Screens, Coarse Sand Cyclone, Fines Cyclone Dewatering Screens Are Each 12ft x 6ft Complete With Electric Motors, Pumps, Pipework, Handrails, Framework Excellent Condition This Is A Serious Sand Plant. Built To Handle Large TPH

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D Pjdpfx Asznz Ezeazogt • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,828 h, functionality: fully functional, machine/vehicle number: 61700170, total width: 2,300 mm, total height: 3,300 mm, total length: 9,200 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Year of manufacture: 2016 Operating hours: 1,828 h Serial number: 61700170 Color: Blue CE certificate available: No Documentation available: No MACHINE DETAILS Dimensions and weight Overall length: 9,200 mm Overall width: 2,300 mm Overall height: 3,300 mm Unladen weight: 10,000 kg Transport data Transport dimensions: 9,200 × 2,300 × 3,300 mm (L × W × H) Transport weight: 10,000 kg Pjdpfsz Ea Rbjx Aazogt Transport packages: 3 pcs.

Condition: new, Year of construction: 2026, Bitumen Sprayer+Crack Sealer 2in1/ BM Combo (Without trailer) Melt and apply asphalt crack filler machine Combo has a wide range of applications. BCM-120 is professional equipment that has proven itself in the road construction industry, maintenance or repair of road surfaces. Trailed asphalt distributor ensures accurate and efficient spreading of bitumen emulsion. An upgraded bitumen machine BM-Combo runs on diesel engine with hydraulic pump drive and heats emulsion from diesel burner. The bitumen emulsion sprayer is equipped with a separate tank. Another one is installed to be filled with mastic. Materials are mixed manually. A crack sealer has an automatic control of mastic heating and the purging system. GENERAL 1. Diesel engine – 14-18 hp 2. Compressor receiver – 25L 3. Pumps drive – hydraulic CRACK SEALER 1. Bitumen tank – 120L 2. Bitumen pump – up to 10L/min, 5 bar 3. Hand spraying rod + hose 2m (not heated) 4. Manual mixing 5. Bitumen heating – diesel/gas burner 6. Heating control – automatic 7. Blowing system BITUMEN EMULSION SPRAYER 1. Emulsion tank – 1000L 2. Pump – 36L/min, 2 bar 3. Emulsion heating – diesel/gas burner 4. Hand spraying rod + hose 4m 5. Spraying bar 7 nozzles 6. Pipe line cleaning system and spray bar blowing Psdpfxjvptd No Aazsgt Advantages -You get a bitumen emulsion sprayer and a crack sealer in one machine. -An economical diesel engine comes as standard. -You can heat the mixture from gas or electricity. -We offer the price from the manufacture and unsurpassed service.

Condition: used, Year of construction: 1979, MAN 19 280 F BREINING body FEDERAL Emulsion / Asphalt Sprayer Note: Suitable only for emulsion, not for liquid asphalt! Control panel for the superstructure located in the cab! • Manual transmission • Differential lock • Long-distance cab • 1 bunk • Leaf/leaf suspension • Tyres: 12 R 22.5 (alternative: 315 / 80 R 22.5) • Tank capacity: 6,000 litres emulsion • Burner NEW! • Spray bar foldable on both sides! Errors and prior sale excepted! Pgodpfowmpcnox Aazet = More information = Fuel type: Diesel Mileage: 67,000 km Applicable material: Asphalt Damages: Damaged vehicle (not drivable)

Condition: new, functionality: fully functional, Year of construction: 2026, Available in stock Capacity – 500 l. Diesel engine. Self-Propelled. Diesel Burner. Engine fuel tank – 50 l. Oil tank – 30 l. Pjdpfx Aed Swd Ueazogt Thermal oil heater – 80 l. Electrically heated hose – 6 m. Heating the mastic through the thermal oil (thermal oil jacket).

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 24559, pressing force: 34 t, total width: 2,400 mm, total length: 6,500 mm, total height: 2,400 mm, overall weight: 4,635 kg, filling opening length: 1,000 mm, filling opening width: 1,900 mm, power: 5.5 kW (7.48 HP), Well-maintained waste container Pedpfez En Dpox Aazogt Husmann SPB20SEN Lifting and tilting mechanism for 660-liter roll-on/roll-off containers Lifting and tilting mechanism with increased height for a 1,200 mm high platform Discharge flap

Condition: good (used), functionality: fully functional, power: 35 kW (47.59 HP), fuel type: diesel, overall weight: 4,600 kg, operation weight: 4,600 kg, Year of construction: 2001, operating hours: 1,828 h, VÖGELE 6-90 Track-Driven Asphalt Paver For sale: a robust and reliable VÖGELE 6-90 asphalt paver, ideal for smaller to medium-sized roadworks, repairs, and maintenance projects. 🔧 Technical specifications: Make: VÖGELE (Joseph Vögele AG – Germany) Model: 6-90 Year of manufacture: 2001 VERY LOW HOUR COUNT = only 1828 operating hours. Power: 35 kW Serial number: 690617 Max. operating weight: 4600 kg Track drive for optimal stability and traction 💪 Key features: Compact and maneuverable machine, perfect for urban environments Very suitable for bicycle paths, parking lots, driveways, and small roadworks Solid German quality – built to last Simple operation and maintenance Mechanically in good working order (as can be seen in the photos) 🛠️ Condition: Used machine with normal signs of wear and tear Ready for use, in fully good working order. Always used in a professional environment Ideal for someone looking for an affordable paver without a large investment General synonyms: Asphalt spreader Road asphalt machine Asphalt layer Road layer Asphalt laying machine Asphalt paver (commonly used in the industry) Paver Pedpfx Aaezbmuvjzsgt Road construction machine (more general) Bitumen spreading machine (slightly broader, depending on use) Asphalt machine Road construction spreader Compact asphalt layer

Condition: used, Year of construction: 1999, operating hours: 13,300 h, * Bitelli SF 200 asphalt milling machine * Year of manufacture: 1999 * Operating hours: 13,000 h * MB engine Pjdpfozm Epbex Aazegt * Milling width: 2 m * Hydraulic folding conveyor belt * Weight: 29,000 kg * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: new, functionality: fully functional, Year of construction: 2026, BS-500 PRO(without trailer) Even the best road coating wears during exploitation. Heavy traffic, unfavorable weather conditions, and other factors negatively affect the asphalt. Bitumen pressure distributor BS-500 PRO – is the number-one equipment to protect the load-bearing structure of the road with surface treatment. The model has a safe and inexpensive heating system, responsible for maintaining the required temperature of the emulsion. The 500-liter emulsion tank is insulated with solid mineral wool. Pedovuaccopfx Aazsgt Technical Specifications Engine power (petrol, air cooled)-4.3 kW (5.8 hp) Emulsion tank capacity-500 l Productivity-28 l/min Nozzles on the spraying bar- 7 pcs Spraying width-1.7 m Diesel cleaning system Spraying bar is modularised, consisting of 3 sections, with rubber protection plates that protect against contamination and emulsion in unplanned areas Remote control of the spraying bar Electric starter Tank self priming function Emulsion tank heating system Ability to connect a third party compressor for cleaning the spraying bar

Condition: new, functionality: fully functional, Year of construction: 2026, Lintec 160 To./h fully mobile asphalt mixing plant - year: Neu - capacity: 160 To./h - cold feeder: 4x 7.5 m³ single trailer - dryer drum Pgjdpfx Aajyi Hm Iszst - drag elevator to load asphalt onto the trucks with 1m³ silo space - dust collector Dry system with Nomex sleeves filters ; filter space 415m² - mixer Body in carbon steel plate structure, with heating cabinet by thermal oil, internal coating system anti-wear, sealing caps and inspection - control room with fully automatic software and manual mixing desktop - Mobile Tank 60.000L (40.000L bitumen / 20.000L fuel) available for extra price

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Dimensions of the feed opening: 119.5 cm x 65 cm Pgodpoz E Nimsfx Aazet The HSM 1160 V-Press features easy operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 16232, overall weight: 19,400 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 4,400 kg, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 60 l, Equipment: documentation/manual, Avermann MPC 16 P/E – 16 m³ | Discharge hatch | Fully rubber-lined For sale: Avermann MPC 16 P/E compaction container, built in 2010, with a capacity of 16 m³. This robustly built Avermann compaction container is specifically designed for applications involving the processing of moist or wet waste streams. The machine is equipped with a discharge hatch and is fully rubber-lined on both the front and rear sides. This makes this compaction container particularly suitable for situations where good sealing is important and where, for example, wet waste, industrial waste, or other moist waste streams are processed. The container is equipped with a hook lift system on the front, making it suitable for transport with a hook arm system. Technical data: Pgedoz Eqzqjpfx Aazjt Brand: Avermann Type: AVOS MPC 16 P/E Year of construction: 2010 Serial number: 16232 Capacity: 16 m³ Power supply: 400 V / 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP54 Maximum working pressure: 200 bar Own weight: approx. 4,400 kg Permissible total weight: 15,000 kg Hook lift system on the front Equipped with a discharge hatch Front and rear sides fully rubber-lined Robust industrial construction Special features: Due to the combination of the discharge hatch and the rubber lining, this machine is very suitable for processing wet and moist waste streams. The large feed opening makes it easy to quickly feed larger quantities of waste. The compaction container is in used condition and has signs of wear consistent with its age and use. Technically, it is a heavy-duty and robustly built Avermann compaction container for professional use. Suitable for, among others, industry, food companies, manufacturing companies, catering, recycling and waste processing. Inspection and testing are possible by appointment. Please feel free to contact us for more information, price or technical questions. Keywords: Avermann, AVOS, MPC16, MPC 16 P/E, compaction container, 16m3, waste compactor, container compactor, wet waste, discharge hatch, rubber sealing, rubber-lined, hook lift, waste compaction, recycling, compactor.

Condition: new, Year of construction: 2026, BITUMEN EMULSION SPRAYER BS-2000 - Spray bar for 11 nozzles with a width of 2.4 m - Spray width with tyre - 2.4-2.8 m - System cleaning - 3-level, diesel fuel - Tanker self-pumping function - Mounting on a frame or on a trailer on request - Emulsion tank heating system - Own 2000 l tank - Possibility of connecting a third-party compressor for cleaning the sprinkler bar - Mechanical thermal sensor Pgodpovpg Eaefx Aazet - Lance for manual sprinkling Completing: - Tank truck 2000 l - Power block - Hose - 4m with rod and nozzle for manual spraying - Hoses for supplying bitumen emulsion - Spray bar for emulsion with 11 nozzles - Gas burner with regulator Specifications: Power block (Petrol Engine HONDA GX-200) Engine power – 4.1 kw - Spray rate of bitumen emulsion with hand lance4 l/min - Spraying rate of bitumen emulsion through tyre 55 l/min - Engine 4-stroke petrol engine with air cooling - Bitumen emulsion consumption 0.8 l/m2 - Tank capacity 2000 l - Recommended gas cylinder 27 l (not included) - Overall dimensions (portable) without trailer 257*190*160 cm - Shoulder weight (without emulsion) 715 kg Price: 9600 Euro (Netto) Price on the trailer: 15000 Euro

Condition: used, Year of construction: 2008, operating hours: 5,281 h, * Type: Demag DF 65P * Year of manufacture: 2008 * Power: 52 kW Pgjdpjy Hblhsfx Aazet -----Internal vehicle number: 10326----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp – German, English – WhatsApp – German, English, Arabic

Year of construction: 2020, operating hours: 2 h, condition: reconditioned (used), functionality: unexamined, For sale is a complete PET bottle recycling washing plant for processing used PET bottles into clean PET flakes. The plant is designed for a production capacity of approximately 1,000 kg/h and is suitable for recycling companies, plastics processors, and companies that want to industrially sort, shred, wash, and dry PET bottles. According to the documentation, the water-contacting components are made of SUS304 / stainless steel 304. Technical Specifications Feature Specification Plant type PET bottle recycling and washing plant Capacity approx. 1,000 kg/h Pedpfozhifiex Aazjgt Raw material used PET bottles End product cleaned PET flakes Residual moisture ≤ 1% Flake size approx. 14 mm, adjustable Proportion 8–12 mm ≥ 90% Fine granulate ≤ 3% Powder content ≤ 5% Installed power 238 kW Power consumption approx. 153 kW/h Water requirement approx. 6–8 t/h, recyclable Working area approx. 59 × 4 × 6 m / approx. 208 m² Personnel requirement approx. 9 people Plant scope The line consists of the central machines for the complete recycling process: Conveyor belts Bale opener / De-Baler Label remover Manual sorting station Metal detector Plastic mill / Crusher Screw conveyor Float-sink washing systems High-speed dewatering machines Hot steam washer High-speed friction washer Zig-Zag label blower for label and dust separation Storage or product silo Electrical control cabinet Description This PET washing plant is designed for the industrial recycling process of post-consumer PET bottles. The process begins with the feeding of the compressed bottle bales, followed by bale opening, label removal, manual sorting, and metal detection. Subsequently, the bottles are shredded and cleaned in several washing, friction, and dewatering stages. The plant features a hot steam washer that operates with water at approximately 90–95 °C and, together with cleaning agents, removes oil, dirt, adhesives, and label residues. The flake stream is further cleaned via float-sink washers to separate caps, label residues, and other foreign substances. The final drying takes place via high-speed dewatering units. The result is clean PET flakes with a residual moisture content of a maximum of 1%, suitable for further processing, e.g., granulation, extrusion, or recycling into plastic products.

Condition: excellent (used), fuel type: diesel, first registration: 02/1997, Year of construction: 1997, HATZ DIESEL 2L40CH Tank 1200 litres = Further information = Gross vehicle weight: 3,800 kg Technical condition: very good Pgodpfsydfa Aox Aazjt Visual condition: very good Serial number: 12057 Please contact Thierry Leemans for further information.

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 13.645, pressing force: 38 t, total width: 2,500 mm, total length: 6,200 mm, total height: 2,500 mm, overall weight: 14,700 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 4,700 kg, input current: 32 A, year of last overhaul: 2023, Avermann MPC16PE compaction container – fully overhauled in 2023 – double hook connection – drop gate For sale: Avermann MPC16PE compaction container with a capacity of 16 m³. This machine was fully overhauled by us in 2023. During the overhaul, the compaction container was completely inspected technically and subsequently blasted and repainted in RAL 7016 anthracite gray. As a result, the machine is in very good condition both technically and visually. The compaction container has a double hook connection, allowing it to be lifted from both sides. In addition, the machine is equipped with a drop gate, making this model particularly suitable for processing wet waste and other moist waste streams. Due to its robust construction, a load capacity of 10,000 kg, and its practical design, this compaction container is very suitable for, among others, industry, manufacturing companies, the food industry, hospitality, waste processing, and recycling. Pgsdjz Ephcspfx Aazot Technical specifications: Brand: Avermann Type: MPC16PE Machine number: 13,645 Overhaul year: 2023 Capacity: 16 m³ Power supply: 400 V Power: 5.5 kW Fuse: 25 A slow-blow Own weight: approx. 4,700 kg Maximum load weight: 10,000 kg Color: RAL 7016 anthracite gray Double hook connection Equipped with a drop gate Suitable for hooklift transport Very suitable for wet waste / moist waste streams Details: The machine was completely overhauled, blasted, and repainted in 2023. During this process, the compaction container was technically inspected and reassembled in excellent condition. A very neat and well-executed compaction container for companies looking for a professional, overhauled machine without the investment of a new compaction container. Inspection and testing are possible by appointment. Please feel free to contact us for more information, prices, or technical questions. Keywords: Wortmann, Avermann, MPC16PE, MPC16, compaction container, 16 m³ compaction container, waste compactor, container compactor, wet waste, drop gate, double hook connection, waste compaction, recycling, compactor, overhauled compaction container.

Year of construction: 2009, condition: used, Complete cable recycling plant for sale – including MG Recycling Compact 220T (in excellent condition) For sale is a complete cable recycling plant (dry process) for the efficient recovery of copper from cables. ⭐ Core component of the plant: MG Recycling Compact 220T (year of manufacture 2009) * Industrial compact system for separating copper, aluminum, and plastic * Capacity: up to 400 kg/h * Power consumption: approx. 37 kW * High-quality granulation & separation * Very robust design (approx. 3.2 t machine weight) ➡️ Proven system for cable recycling with high purity and reliable continuous operation. ⸻ ⚙️ Other components of the plant: * Large screening system (TST – separation & sorting technology) * Additional separation table for post-separation * Various conveyor belts & screw conveyors * Large two-shaft shredder for pre-shredding * Cable stripping machine Pedpfxezgx H He Aazjgt The components from TST are specifically designed for industrial separation and screening processes and enable very precise classification and purification of materials. ⸻ Performance data of the complete plant: * Throughput: approx. 200–300 kg of cable per hour (realistic in operation) * Recovery: up to 99% copper content * Process: completely dry (no water, no sludge) * Ideal for: * Copper cables * Electronic scrap * mixed cable batches ➡️ Very efficient post-processing through additional screening and separation tables → maximum yield! —————- Special features: * Completely coordinated production line – ready for immediate use * Expandable / modular design * Perfect for commercial cable recyclers & recycling companies * Energy-efficient separation technology without wastewater —————- Condition & sale: * Plant is in good condition and currently in operation * Sale due to operational restructuring * Inspection possible by appointment —————- Price: Negotiable – realistic offers welcome

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 19439, pressing force: 38 t, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 80 l, pressure: 200 bar, year of last overhaul: 2023, Avermann AVOS SP-12 stationary baling container | Overhauled in 2023 | Not used since For sale: Avermann AVOS SP-12 stationary baling container, year of manufacture 2014. This reliable Avermann baling container was overhauled by us in 2023 and has not been used since the overhaul. As a result, this is an interesting machine for anyone looking for a well-maintained used baling container that can be put back into operation immediately. The AVOS SP-12 is a robust baling container, suitable for compacting various waste streams and ideally applicable in industries, logistics companies, manufacturing companies, and waste processing plants. Technical data: Brand: Avermann Type: AVOS SP-12 Year of manufacture: 2014 Serial number: 19439 Power: 7.5 kW Pgedpfxsz Enubj Aazjt Power supply: 3 x 400 V + N + PE, 50 Hz Fuse rating: 32 A Maximum working pressure: 200 bar Protection class: IP55 Integrated hydraulic pressing unit Large feed opening Suitable for transport with a hook lift Specifics: The machine was overhauled by us in 2023. After this overhaul, the baling container has not been used and has been idle since. The machine is in good used condition visually. There are, of course, some minor signs of wear and tear that are consistent with the age and type of machine. A great opportunity for companies looking for a professional Avermann baling container at a more attractive investment than a new one. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, AVOS, SP-12, baling container, waste compactor, container compactor, waste compaction, recycling, compactor, pressing unit, self-compacting container.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 18166, pressing force: 38 t, total width: 2,500 mm, total length: 6,900 mm, total height: 2,500 mm, overall weight: 15,000 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 5,350 kg, input frequency: 50 Hz, input current: 32 A, oil tank capacity: 60 l, Equipment: documentation/manual, Avermann MPC 20 P/E/L/W – 20 m³ | Double-sided cable & hook connection | Extra-large feed opening For sale: Avermann MPC 20 P/E/L/W compaction container, year of manufacture 2012, with a capacity of 20 m³. Pjdpfx Asz Ep R Djazjgt This robust Avermann compaction container stands out due to its very large feed opening – the largest in its class. This allows larger and bulkier waste streams to be easily and quickly fed into the container. The feed opening is equipped with two separate lids that can be opened sideways, ensuring that the opening remains easily accessible and the machine can be used flexibly. In addition, this compaction container can be connected on both sides and is suitable for both cable and hook connections. This makes the machine particularly practical when different transport and removal systems are used. The machine is heavy-duty and suitable for professional use in various sectors, including industry, logistics, manufacturing, distribution, recycling, and waste processing. Technical specifications: Brand: Avermann Type: MPC 20 P/E/L/W Year of manufacture: 2012 Serial number: 18166 Capacity: 20 m³ Power supply: 3 x 400 V + N + PE, 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP54 Max. working pressure: 200 bar Own weight: approx. 5,350 kg Permissible total weight: 15,000 kg Double-sided connection Suitable for both cable and hook connections Two sideways-opening lids on the feed opening Very large feed opening – the largest in its class Special features: Thanks to the very spacious feed opening, this compaction container is ideally suited for feeding in larger quantities and bulky materials. The two separate, sideways-opening lids ensure that the feed opening can be easily made fully accessible. The combination of double-sided connection and both cable and hook connections also makes this machine particularly flexible for transport and emptying. The machine is in used condition and shows signs of wear and tear, as can be seen in the photos. Technically, it is a well-built, industrial Avermann compaction container with a generous capacity of 20 m³. Inspection and testing are possible by appointment. Please feel free to contact us for more information, price, or technical questions. Keywords: Avermann, AVOS, MPC20, MPC 20, MPC 20 P/E/L/W, 20m3 compaction container, compaction container, waste compactor, container compactor, double-sided connection, cable connection, hook connection, removal compactor, waste compaction, recycling, compactor, large feed opening.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 21239, pressing force: 38 t, overall weight: 15,000 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 5,580 kg, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 80 l, Equipment: documentation/manual, Avermann AVOS MPC 20 + HKV – 20 m³ | Tilting mechanism 240/660/1100 L | Cable & hook attachment | Discharge flap For sale: Avermann AVOS MPC 20 P/A/L/R + HKV compaction container, built in 2016, with a capacity of 20 m³. This robust Avermann compaction container is equipped with an integrated hydraulic lifting and tilting mechanism, making it particularly suitable for locations where roll-on-roll-off containers need to be emptied directly into the container. The tilting mechanism features a hydraulic comb attachment for 240-liter containers and a DIN attachment for 660- and 1,100-liter roll-on-roll-off containers with a flat lid. This makes the machine versatile and suitable for various types of waste containers. In addition, the compaction container is suitable for both cable and hook attachments. At the rear, the machine is equipped with a discharge flap instead of a traditional discharge door, making this version particularly interesting for certain waste streams and applications. Technical specifications: Brand: Avermann Type: AVOS MPC 20 P/A/L/R + HKV Year of construction: 2016 Serial number: 21239 Capacity: 20 m³ Power supply: 3 x 400 V + N + PE, 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP55 Maximum working pressure: 200 bar Own weight: approx. 5,580 kg Permissible total weight: 15,000 kg Integrated hydraulic lifting and tilting mechanism Hydraulic comb attachment for 240-liter containers DIN attachment for 660- and 1,100-liter roll-on-roll-off containers Cable and hook attachments Equipped with a discharge flap Condition: The machine is currently in used condition and shows visible signs of wear and tear, consistent with its age and use. The compaction container can be delivered in its current state, but if desired, it can also be fully overhauled, sandblasted, and repainted in a color of your choice. Pgsdsz Ergzepfx Aazet Price in current condition: €9,000 Price fully overhauled, sandblasted, and repainted: €17,500 Due to the combination of the 20 m³ capacity, integrated tilting mechanism, and flexible container attachments, this is a very practical machine for, among other applications, industry, logistics, manufacturing companies, recycling, and waste processing. Inspection and testing are possible by appointment. Please feel free to contact us for more information or technical questions. Keywords: Avermann, AVOS MPC20, MPC 20, compaction container, 20m3, waste compactor, container compactor, HKV, lifting tilting mechanism, tilting mechanism, 240 liter, 660 liter, 1100 liter, DIN attachment, comb attachment, hook attachment, cable attachment, discharge flap, waste compaction, recycling.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 16632, pressing force: 34 t, overall weight: 18,200 kg, tank capacity: 60 l, type of input current: three-phase, input voltage: 400 V, electrical fuse: 25 A, empty load weight: 6,200 kg, Husmann 22 m³ compaction container with tilting mechanism | Geesink connection | Hook and cable For sale: Husmann compaction container with a capacity of 22 m³, equipped with a hydraulic tilting mechanism with a Geesink connection. This robust compaction container is suitable for professional use in various sectors, including waste collection, industry, logistics, production, and recycling. Thanks to the integrated tilting mechanism, containers can be easily emptied mechanically into the compaction container. The machine can be attached to the front using either a hook or a cable. The container is also equipped with a connection at the rear, but this side is only suitable for hook attachment. This makes the compaction container versatile and compatible with different transport systems. Technical specifications: Brand: Husmann Capacity: 22 m³ Machine number: 16,632 Year of manufacture/refurbishment: 2017 Power supply: 400 V Power: 5.5 kW Fuse: 25 A slow-blow Weight: approx. 6,200 kg Load capacity: 12,000 kg Color: RAL 7016 Hydraulic tilting mechanism with Geesink connection Front: hook and cable attachment Rear: hook attachment Large intake opening Heavy-duty industrial design Condition: The compaction container has been used and shows clear signs of wear, consistent with its age and use. The machine has not been cosmetically refurbished but is still functional and ready for use. The robust Husmann construction, large capacity of 22 m³, and integrated tilting mechanism make this an interesting machine for companies looking for a functional compaction container at an attractive price. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Pgjdez Ep Upepfx Aazst Keywords: Husmann, compaction container, 22m3, 22 m³, waste compactor, container compactor, tilting mechanism, Geesink, Geesink connection, lifting tilting mechanism, hook attachment, cable attachment, waste compaction, recycling, compactor, waste container.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 332/18, Plastic regranulation line prepared for processing both film flakes and regrind. Machine capacity: 800–1200 kg, depending on the material. Equipment: 1. Forced feeder 2. 160/54D extruder with two independent degassing zones 3. Cutting system on head, model OR1000 4. Centrifugal dryer 5. Vibrating sieve 6. Additional plasticizing unit (screw + cylinder + feed hopper) Not included in the offer: 1. Automatic mesh filter GB1000 (equivalent to Britas ABMF1050-09) Pedpey N T Uyjfx Aazsgt