Used Triggered Backworking Ms52 for sale (188)

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area Gjdpfxjw Ryt Do Agpeit - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Condition: like new (used), Year of construction: 2013, operating hours: 400 h, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, total height: 890 mm, total width: 986 mm, total length: 705 mm, overall weight: 170 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, SPECIAL OFFER with optional full service (delivery, commissioning) Technical Specifications of the HEXAGON OPTIV CLASSIC 321 GL tp Measuring Machine Year of manufacture: 2013 Maximum traverse speed in X, Y, Z axes: 160 mm/s Maximum workpiece weight: 20 kg Measurement resolution: 0.05 µm Measurement accuracy in X, Y axes (optical sensor): Ex, Ey = (1.6 + L/250) µm Measurement accuracy in XY axes (optical sensor): Exy = (2.0 + L/250) µm Measurement accuracy in Z axis (optical sensor): Exy = (3.9 + L/200) µm Measurement accuracy in X, Y axes (touch-trigger probe): Ex, Ey = (2.0 + L/250) µm Measurement accuracy in XY axes (touch-trigger probe): Exy = (2.5 + L/250) µm Measurement accuracy in Z axis (touch-trigger probe): Ez = (2.9 + L/200) µm Measuring volume Optical Sensor: X 300mm Y 200mm Z 150mm Measuring volume tactile sensor: X 230mm Y 200mm Z 150mm Dimensions (L x W x H): 705 x 986 x 890 mm Machine weight: 170 kg Measuring machine features: Giedexmgvpspfx Agpst 3-axis microprocessor CNC with vector path control Metrology software: PC-DMIS Vision Vision sensor for non-contact measurement of the smallest and most precise components CCD camera with 6.5x motorized CNC zoom DC servo motors TESA touch probe system (1 body and 1 module) Modular probe changer: TESASTAR with 4 slots and 4 modules Linear guides on all axes Coaxial LED incident light (white LED) LED backlight (green LED + diffuser) Multi-segment LED ring light Including evaluation computer by Dell Optional services: Delivery (extra charge) Commissioning (extra charge)

Condition: ready for operation (used), functionality: fully functional, CNC dividing head with stepper motor control, - Divisions from 1-999 possible - Odd divisions also possible Gjdpewmd Irsfx Agpjit - Ideal for face grinding, divisions – saws with high tooth pitch, or even slow cylindrical grinding of circular knives - Can be retrofitted to any tool grinding machine - Rotatable, pivotable in all directions, horizontally and vertically - Easy installation on the machine table using T-nuts - Can also be supplied with a small mounting angle - Center height 190 mm or 140 mm measured from the machine table. - CNC dividing head available with MT5 chuck or SK 40 chuck - Division is triggered via foot switch or optionally a simple contact/switch, etc. on the machine table can be triggered - The division process can be fully automated with the hydraulic machine table or linked via the CNC machine control system. New price: €12,800

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Sub Spindle Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Giodpeyn Imysfx Agpst Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: used, Falch 3 phase high pressure cleaner 500 bar pressure @ 15lpm only done about 360 hours and works perfectly. Sold with trigger but no hose used for cleaning boat hulls stone work excavator tracks and any cleaning where very high pressure is required Gjdpfx Ajxc Numjgpeit

Condition: good (used), Turbo systems stainless depositor Model: D900 Gedpfx Ajffh Adegpjit Stainless depositor, 25Kg hopper, variable speed, hand operated trigger for discharging product

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 (3D), spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive axis travels of 1100 mm in X, 560 mm in Y, and 510 mm in Z. The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 control system. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details. • Operating hours: • Spindle hours after replacement: 2,900 h • Spindle hours (machine counter): 32,420 h • Power-on hours (counter): 60,300 h • Condition: Powered on and running in production; inspection possible (operation, geometry, overall condition) • Worktable size: 1400 × 560 mm • Axis dynamics: Rapid traverse 30 m/min (linear axes) • Spindle: • Tool clamping: DIN 69872 • Tool magazine: 30-position chain-type magazine with double gripper • Cooling/media: Coolant–air switching via M-function (external), chip tray • CNC control: HEIDENHAIN TNC 620 (3D) with ASCII keyboard and 15" monitor • Measuring systems: Direct measuring systems (linear scales) on X/Y/Z; air purge for measuring system • Additional machine options: • Safe voltage package: X and Y axis motors with brake, overvoltage limiter, undervoltage monitoring with emergency stop trigger • Software options – HEIDENHAIN: • Option 3 (#21): M120 tool radius compensation for contouring, LOOK AHEAD up to 99 blocks, 3D machining, M118 handwheel positioning during program execution Additional equipment • Scraper-type chip conveyor (left side) • Coolant tank, 250 l • Manual wash gun for machining area • 4-color signal tower • HEIDENHAIN probing package: Wireless workpiece measuring probe and probe calibration ring • Manual handwheel (portable control panel) Technical Specification Taper Size SK 40 Gijdpfx Ajylkl Togpot

Condition: excellent (used), Year of construction: 2017, Mazak Optiplex Nexus 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 12/2016 Condition: used, very good, under power Availability: from July 2023 Operating hours: Time CNC AN 16.276h Time Laser AN 15.653h Time automatic operation 11.096h Cutting time 10,964h Total cutting time 7,365h CNC control: MAZATROL PREVIEW 3 Weight: 12800 kg Power requirement: 57 kVA. Dimensions: 8,490mm x 3,485mm x 2,010mm Axis travel: 3,100mm x 1,580mm x 110mm GENERAL MACHINE OPTIONS 6981SD120 1 set of adjustment tools 6981TL307 Support grid (distance between bars 100mm) 6981AS670 Automatic calibration device 6981SD154 Non-contact height sensing with repeat function 6981AS684 Nozzle cleaning brush 6981AS678 Focus position adjustment 6981SD168 Manual workpiece clamping 6981SD130 Machine feet / leveling shoes 6981SD282 Machine status indicator light 6981SD216 NC monitoring for shielding gas pressure 6981SD189 Without resonator 6981NO513 Programming function on the control unit via fixed programs 6981CV222 Collecting container for material waste 6981NO612 Cutting table layer detection 6981EL110 Transformer for the European market 6981SD200 Additional selector switch for cutting gas CUTTING HEADS 6981LN705 Multi-Control cutting head 6981LN005 Lens for Multi-Control cutting head 6981LN610 Cassette for focus lens Multi-Contro cutting head 6981LN602 Protection window for Multi-Control cutting head 5 pieces NOZZLES 6981NZ068 Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm 5 pieces each 6981SD317 Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces 6981SD303 Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 6981TL321 3rd auxiliary gas line (30 bar) PAINTING 6981SD728 Mazak standard color PROTECTIVE HOUSING 6981CC096 Laser safety screen (5 pieces) SAFETY DEVICE 6981SD030 Work area lighting 6981SD748 Machine with CE mark 6981ES230 Preparation for dust separator FACTORY AUTOMATION 6981AS050 Automatic switch-off via circuit breaker trigger The power supply is switched off at the end of a program. PALLET CHANGER 6981PC010 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL Giodpfeyuchxox Agpot 6981NC319 15″ Xga Color Tft monitor 6981NO869 LAN interface 6981NC083 Mazatrol Preview 3 control unit 6981FT575 NC repeat function 6981MZ200 Relocation Detector 6981NO870 USB interface for PC MACHINE MODEL 6981SD185 Preparation for 4kW resonator GENERAL MACHINE OPTIONS 6981AS662 Automatic nozzle change magazine with 8 slots 6981AS685 Nozzle cooling function 6981DEAA002 Fiber Laser Resonator 4kW incl. cable and cooling unit 6981SD118 Intelligent monitoring + focus point detection 6981RB165 Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED 6981DEES001 Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION 6981SD073 Set of manuals in electronic form on CD

Condition: excellent (used), Year of construction: 2016, Mazak Optiplex 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 05/2016 Condition: used, very good, under power Availability: from May 2023 Operating hours: Time CNC AN 29.999h Time laser AN 15.653h Time automatic operation 11.839h Cutting time 28,708h Total cutting time 6,665h CNC control: MAZATROL PREVIEW 3 Weight: 15000 kg Travel: 3,100mm x 1,580mm x 110mm Power requirement: 54 kVA. GENERAL MACHINE OPTIONS 1 set of adjustment tools Support grid (distance of the bars 100mm) Automatic calibration device Non-contact height sensing with repeat function Nozzle cleaning brush Focus position adjustment Manual workpiece clamping Machine feet / leveling shoes Machine status indicator light NC monitoring for shielding gas pressure without resonator Programming function on the control unit via fixed programs Collecting container for material waste 6981NO612 Cutting table layer detection Transformer for the European market Additional selector switch for cutting gas CUTTING HEADS Multi-Control cutting head Lens for Multi-Control cutting head Cassette for focus lens Multi-Contro cutting head Protection window for Multi-Control cutting head 5 pieces Gsdpfxsyucguo Agpeit NOZZLES Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm each 5 pieces Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 3rd auxiliary gas line (30 bar) PAINTING Mazak standard color PROTECTIVE HOUSING Laser safety screen (5 pieces) SAFETY EQUIPMENT Work area lighting Machine with CE mark Preparation for dust separator FACTORY AUTOMATION Automatic switch-off via circuit breaker triggering The power supply is switched off at the end of a program. PALLET CHANGER 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 15″ Xga Color Tft monitor LAN interface Mazatrol Preview 3 control NC repeat function Relocation Detector USB interface for PC MACHINE MODEL Preparation for 4kW resonator GENERAL MACHINE OPTIONS Automatic nozzle change magazine with 8 slots Nozzle cooling function Fiber Laser Resonator 4kW incl. cable and cooling unit Intelligent monitoring + focus point detection Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION Set of manuals in electronic form on CD

Condition: used, Very handy and ergonomic, easy to use stroboscope with high lighting intensity (up to approx. 50 cm distance) and low energy consumption. Design with plug-in exchangeable battery pack. High frequency stability and easy adjustment with frequency doubler and splitter. Phase shift + / - 6° for observing different positions. Sensor input for external trigger. SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFNL016 Gjdpfxsxzh Upe Agpsit Listing name: ALLURIS SMS 400 StroboVision Stroboscope

Condition: excellent (used), Year of construction: 2014, operating hours: 31,000 h, functionality: fully functional, CNC-swiss type automatic lathe Gedpfeytq Ahox Agpsit brand: STAR type: SV-38R new in: 2014 equipped with: FANUC 31i control, turret with B, Y, X, and Z axis, driven tools, 2x C-axis, Y2 axis, subspindle, high pressure pump, oil mist, backworking, chip conveyor, parts conveyor, fire extinguishing system, useable for short and long parts automatic bar loader FMB TURBO 5-55

Condition: refurbished (used), functionality: fully functional, overall weight: 600 kg, type of input current: AC, Watkiss PowerSquare 224 Offline / Manual Operation The machine is in very good condition. The PowerSquare is not only versatile, but also extremely easy to operate and produces unbeatable professional brochures. • Booklet maker for brochures up to 56 sheets / 224 pages at 80 gsm • Heavy-duty wire stitch head (completely overhauled) • Product size: Min. feed size: 120 x 200 mm // Max.: 370 x 520 mm • Automatic format adjustment, automatic wire length adjustment • 2 new front edge trimmer blades • 1 - 6 stitches, evenly distributed on the spine. Production of brochures without staples also possible. • Wire from spool: up to 291,500 stitches • Machine has been completely overhauled and operates without defects • Fully automatic machine setup • Immediately operational / production starts from brochure 1 • Test run possible by arrangement Gsdsxn Rdaopfx Agpsit • Automatic triggering • 230 Volt / 600 kg • Format range from 120 x 200 mm to 370 x 520 mm Produce unbeatable professional brochures with the PSQ 224. Euro 27,900.00 plus VAT. Shipping / delivery available. Please note our offers refer to used machines, which may show signs of previous use (minor scratches or discoloration). Collection possible, shipping possible, installation and instruction available.

Condition: good (used), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, warranty duration: 12 months, Equipment: documentation/manual, DELIVERY TO UK ONLY Global S Green 05.07.05 HH-AS6-T5, 5° Automatic Indexing Head HP-TM Touch Trigger Probe Standard Styli Kit PC-DMIS Measurement Software Year of Manufacture 2019 Please contact us for alternative configurations. Measuring Range: X 500mm, Y 700mm, Z 500mm Gisdpfxsu Snthj Agpjt MPE(E0/E150) (18 °C - 22 °C) 1.5 + L/333

Condition: new, Year of construction: 2024, Handheld laser welder LWH-2000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W Giedpfxsh H Ngte Agpjt - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN Gsdpfxjyb Tw Rs Agpsit OPTION: TRANSPORTABLE ON WHEELS

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%. Gjdjfxygwspfx Agpeit

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7F001-7, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, No reserve price – guaranteed sale to the highest bidder! According to the manufacturer, the year of manufacture is likely 2015. TECHNICAL DETAILS Measuring range X-axis: 300 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 150 mm Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Maximum traverse speed X, Y, Z-axis: 160 mm/s Measuring accuracy of optical sensor X, Y-axis: Ex, Ey = (1.6 + L/250) µm Measuring accuracy of optical sensor XY-axis: Exy = (2.0 + L/250) µm Measuring accuracy of optical sensor Z-axis: Ez = (3.9 + L/200) µm Measuring accuracy of touch-trigger probe X, Y-axis: Ex, Ey = (2.0 + L/250) µm Measuring accuracy of touch-trigger probe XY-axis: Exy = (2.5 + L/250) µm Measuring accuracy of touch-trigger probe Z-axis: Ez = (2.9 + L/200) µm Measuring volume, optical sensor X: 300 mm Measuring volume, optical sensor Y: 200 mm Measuring volume, optical sensor Z: 150 mm Measuring volume, tactile sensor X: 230 mm Measuring volume, tactile sensor Y: 200 mm Measuring volume, tactile sensor Z: 150 mm MACHINE DETAILS Metrology software: PC-DMIS Vision CCD camera zoom: 6.5x CNC motorized Dimensions & Weight Gedpfx Agjyl U S Depeit Dimensions (L x W x H): approx. 705 mm x 986 mm x 890 mm Machine weight: approx. 170 kg SCOPE OF DELIVERY PC including PC-DMIS Vision measuring software Documentation / manuals Workpiece clamps / stops for securing the items to be measured Various probes included Probe change rack for storing 4 probes

Condition: new, Year of construction: 2026, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 Giedpfsidun Dox Agpet HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed Gisdegwt S Topfx Agpjt • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, neu 2025 030140 prompt, Zwischenverkauf v Deutschland 13429.36 € 257.84 € 1 30 mm MK 3 280 mm Stufe 1: 125 - 4000; Stuf U/min 0,9 / 1,45 kW kW M20 820 mm 520 mm 1900 mm 320 kg 0 - 300 mm/U 240 - 790 mm 420 x 340 mm 125 mm Drilling capacity / normal drilling performance25/30 (in E335/ST60) Automatic feed Digital speed-, drilling depth and feed display Drilling depth adjustment with fine adjustment and undervoltage trigger Giodpfxsxcg D Es Agpjt EMERGENCY STOP pushbutton Stepless speed control Table height adjustment via toothed rack Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth display Drilling depth shut-off; programmable; easy operation Drilling cross with pushbutton for feed on/off switching Optional transparent or black protective hood (stock machine transparent) LED lighting as standard OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Giedpedz Srbefx Agpet Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Condition: new, Year of construction: 2026, Aluminum circular saw BC 450 HA, semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swivel range of 45° to the left and 22.5° to the right and an automatic mitre adjustment via stop functions. The saw stroke runs automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally. can also be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! Equipment Double mitre machine with powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Large mitre range from -22.5° to +45°, Swivel range 67.5° - 0° - 45° Automatic miter adjustment, fixed stop functions at -45° / 90° / +45° and two variable stop functions adjustable to the desired angle! Two horizontal pneumatic clamping cylinders Clearly arranged control panel Large protective hood covers the entire working area, is lifted pneumatically Adjustable blade and cutting feed Connections for extraction system Minimal lubrication system Air gun for cleaning the machine Saw blade ø 450 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the Gjdpjpa Nxaefx Agpeit The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the clamping vice and remove or advance the material Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, Aluminum circular saw UK 800 HA, semi-automatic The UK 800 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 800 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Giodpfx Agsidun Iepot Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 800 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Gjdpfegwt S Eex Agpoit Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: good (used), Year of construction: 2017, Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. -Up to approximately 30 strapping cycles per minute. -Frame internal dimensions approximately 850 x 600 mm. -Secure strapping with 12 mm strap. -Automatic strap feed and return. -Adjustable strap tension. Giedpfxoyxqrnj Agpot -Strapping can be triggered via hand button or foot switch, or alternatively automatic operation selectable (sensor in the tabletop). -Simple and ergonomic spool change and threading system. -Equipped with ergonomic roller conveyors on the table surface. -Working height approximately 820 mm. -The machine is mobile on castors. -The machine can be demonstrated under power.