Used Trimming Unit for sale (31,815)

Condition: used, functionality: fully functional, mileage: 287,319 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Ibsdpfx Aeztm I Ejqqja Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 13 mm Front right - 13 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: ready for operation (used), Siemens stator for 1FK7042-5AF71 servo motor, serial number YFV343660309002, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ibjdpfx Aqjzuu A Hoqsa

Condition: used, mileage: 765,000 km, power: 537 kW (730.12 HP), first registration: 03/2017, fuel type: diesel, overall weight: 30,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2017, Information in English: SCANIA R 730 BOOGIE, FULLY EQUIPPED, SPECIAL INTERIOR, TOP CONDITION First registration: TÜV (German technical inspection): Mileage: 765,000 km Chassis number: YS2R6X20002132529 Engine power: 537 kW (730 hp) V8 Transmission: Automatic Wheelbase: 315 cm (Axle 1 to 2) Iodpfx Aqszuq Rmjqoba Unladen weight: 10,075 kg Permissible total weight: 28,000 kg GCW (Gross Combination Weight): 50,000 kg Cab color: White and Blue Body color: Red Suspension: Fully air-suspended, air suspension front and rear. Emission class: EURO 6 Configuration: 6x2 Front tires: 385/65 Michelin (L60%, R60%) Axle 2 tires: 315/70 L50% R50% Michelin Axle 3 tires: 315/60 L30% R30% Bridgestone Rims: Alcoa DuraBrights (2 years old) Brakes: 60 %, 39 %, 42 % Next service due after: 55,000 km Clutch: 100%. Replaced at 732,000 km. Fifth wheel coupling height: 116 cm Type of fifth wheel coupling: Sliding fifth wheel coupling Cab interior: R Extras: Retarder, air suspension on the front axle, leather steering wheel, upholstered cab, 2x King of the Road luxury seats, climate control with automatic climate control, double glazing, auxiliary heater, refrigerator, navigation system, 27MC, Smart Tacho Gen 2, adaptive cruise control, 2x aluminum tanks with a total volume of 820 liters (500 l and 320 l), numerous additional headlights, spoiler, mudguards, side skirts, sliding fifth wheel coupling, good tires all around, the clutch was completely replaced at 732,000 km, a new retarder was installed at 740,000 km, very well-maintained Scania, immediately available and ready for use. Further information: * Payload: 19925 kg * Height: 3900 mm * Width: 2550 mm * Length: 6650 mm * Type | First Axle: 385/65 R22.5 R * Tire size | First Axle: 385/65 R22.5 * Tire tread depth inside left | First Axle: 60% * Tire tread depth inside right | First Axle: 60% * Maximum axle load | First Axle: 9000 kg * Type | Second Axle: Michelin R * Type | Third Axle: Bridgestone R * Tire size | Second Axle: 315/70 R22.5 * Tire size | Third Axle: 315/60 R22.5 * Tire tread depth outside left | Second Axle: 50% * Tire tread depth outside left | Third Axle: 30% * Tire tread depth inside left | Second Axle: 50% * Tire tread depth inside left | Third Axle: 30% * Tire tread depth outside right | Second Axle: 50% * Tire tread depth outside right | Third Axle: 30% * Tire tread depth inside right | Second Axle: 50% * Tire tread depth inside right | Third Axle: 30% * Maximum axle load | Second Axle: 11500 kg * Maximum axle load | Third Axle: 7500 kg * Wheelbase: 445 cm * Cab: Yes * Price on request: Yes * Position | First Axle: Front * Brand | First Axle: Other * Brake type | First Axle: Disc brakes * Suspension | First Axle: Air suspension * Steering | First Axle: Yes * Alloy rims | First Axle: Yes * Position | Second Axle: Rear * Position | Third Axle: Rear * Brand | Second Axle: Other * Brand | Third Axle: Other * Brake type | Second Axle: Disc brakes * Brake type | Third Axle: Disc brakes * Suspension | Second Axle: Air suspension * Suspension | Third Axle: Air suspension * Reduction | Second Axle: Single reduction * Lift axle | Third Axle: Yes * Twin tires | Second Axle: Yes * Twin tires | Third Axle: Yes * Driven | Second Axle: Yes * Differential lock | Second Axle: Yes * Alloy rims | Second Axle: Yes * Alloy rims | Third Axle: Yes Further equipment: * Tires

Condition: good (used), Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable Ibjdjb Uhn Uepfx Aqqsa -with counter -Table height: 278 mm -Table surface: 1600 x 295 mm -Table thickness: 18 mm -Price: per piece -Number: 2x available -Dimensions: 1600/295/H278 mm -Weight: 170 kg

Year of construction: 2018, condition: used, Compressor system Ibodjzu Al Aspfx Aqqoa Manufacturer: Atlas Copco Type: GA15VSD+FF Year of manufacture: 2018 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, Dust extraction system Manufacturer: Felder Type: RL 300 Year of manufacture: 2021 - Like new, never used - Isdezu Ai Ijpfx Aqqjba Technical data - Airflow rate: max. 6000 m3/h - Rated airflow rate at 20 m/s: 5090 m3/h - Negative pressure at the total connection at 20 m/s: 2680 Pa - Dust extraction connection (can be mounted on the left or right): 300 mm - Filter area: 50 m2 - Sound pressure: 75 dB - Chip collection container (liters): 2 x 250 l Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Return air and exhaust air ducting: The cleaned air is returned to the machine room via galvanized sheet metal ducts. The return air duct is connected to the upper part of the filter unit. A tested fire protection damper K 90 is installed in the area where the duct passes through the workshop wall. Ibodpjzu Ah Djfx Aqqea Technical data: Duct cross-section: 700x700 mm Return air velocity: 7.5 m/s Exhaust air velocity from the workshop:

Condition: used, 4-roll feed unit Ibodpjzuz N Hofx Aqqea Manufacturer: Steff Technical data - Feed rate: 6.5 - 33 m/min Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1987, 4-roller feed mechanism Manufacturer: Schneider Type: V4N Year of manufacture: 1987 Iodozuz Najpfx Aqqeba Technical data - Feed rate of 4 - 22 m/min Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1995, Multi-blade saw with infeed and stacking system Manufacturer: Paul Type: K 34G / 1500 Ibedezuyydspfx Aqqja Year of manufacture: 1995 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2012, Softforming edge banding machine with panel cutting device Manufacturer: Elwood Year of manufacture: 2012 Technical data: - Adhesive application system with slotted nozzle - Compatible with EVA and PUR adhesives - Meler adhesive melting and application system - Electronically controlled adhesive temperature and melting time - Panel thickness: 10-60 mm - 2 profiling milling units - IR heating lamps for material preheating - Spray device for release agent - Pressing zone with heated tower pads (can be replaced with pressing rollers) - Edge band magazine - Front and rear trimming units - Top and bottom flush trimming units for longitudinal edge overhang (2 at the top + 2 at the bottom) - Top and bottom polishing units Ibodpfx Aqszuyi Seqsa - Computer control for quick, easy and precise adjustment of the machine's main functions and units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), CNC control, operator panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control from CNC machining center Mikron VC500D Ibjdpfsztvqiox Aqqea -Type: LE 407 A 264 430 99 -Individual components: see photos -Dimensions: 475/325/H140 mm -Weight: 9.4 kg

Condition: good (used), CNC control, operator panel, logic unit, path control -Manufacturer: Heidenhain, logic unit railway control Ibsdpopz Sf Ejfx Aqqea -Type: LE 407 A 236 484 10 -Individual components: see photos -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Condition: used, Year of construction: 2010, tank capacity 400 l Iodpsm Sk Rgefx Aqqjba working pressure 35 U,210 bar feed pressure / bar weight 900 kg required space 1,72 x 1,00 x 1,81 m

Condition: new, Year of construction: 2021, weight / kg Ijdpfxjzcq N Te Aqqsba

Year of construction: 2003, condition: used, tank capacity 160 l feed pressure 160 bar weight / kg Isden Tvg Eepfx Aqqsba

Condition: used, tank capacity / l working pressure / bar feed pressure / bar weight / kg Iodpfx Ajzdvfzeqqeba required space / m

Year of construction: 2014, condition: used, Capacity / kg/h / type / material / Two-component (2K) adhesive dispensing and mixing system – FERE / Walther Pilot Ijdpfozhxnaox Aqqjba For sale: a used, fully automatic 2K adhesive dispensing and mixing system. Manufacturer: FERE Dosier- und Klebesysteme GmbH Year of manufacture: 2014 Material pressure: up to 6 bar Control voltage: 24 V DC Operating voltage: 3 × 400 V / N / PE Dispensing system: Servo-electric drive Includes Walther Pilot pressure vessel and pneumatic cylinders The system was used for dispensing and mixing 2K adhesives on trim strips and is also suitable for similar applications. Used condition Sold as shown Viewing possible by appointment Assistance with loading available Please contact us if you have any questions or are interested.

Condition: used, Year of construction: 2001, Industrial cooling lubricant or oil cleaning system Belt filter system for cleaning cooling lubricants with cooling unit The system is a centralised system for cleaning and processing cooling lubricants or oils used in metal-cutting production (e.g. grinding, milling, turning) It combines mechanical filtration (belt filter), liquid storage and temperature control by means of an integrated cooling unit. Isdey S D E Uspfx Aqqjba General information Machine type: Centralised system for cooling lubricant preparation Filter unit manufacturer: KNOLL Maschinenbau GmbH, Bad Saulgau Type: PF160 / 200 Year of manufacture: 2002 Reference number: 80.0917 Manufacturer cooling unit: HYFRA Industriekühlanlagen GmbH, Krunkel Type: TRK 50 EF-SS Serial number: Chiller year of construction: 2001 2. technical data - chiller (HYFRA TRK 50 EF-SS) Cooling capacity: 2000 W Max. Ambient temperature: 37 °C Permissible operating overpressure: 29.5 bar Refrigerant: R 407c Voltage: 3~ / PE / 400 V Frequency: 50 Hz Max. Operating current: 5.9 A Connected load: 3.3 kW Water filling weight (total): approx. 160 kg 3. function & area of application The system is used for centralised cleaning, cooling and recirculation of cooling lubricants or grinding oil in metal-cutting operations. It consists of a belt filter module (KNOLL PF160/200) for the filtration of solids and chips, a cooling unit (HYFRA TRK 50 EF-SS) for temperature control of the liquids Translated with (free version)

Condition: used, weight / kg taper MK / Included in delivery: Make: Lenzkes 5x low-tensioner LH 012 4x tensioner extension (large) 3x tensioner extension (small) Isdey Suqhepfx Aqqoba 2x non-matching claws

Condition: used, Year of construction: 1990, tank capacity 160 l feed pressure 160 bar weight / kg Hydraulic power pack - NACHI S. hydraulic unit Manufacturer: NACHI-FUJIKOSHI CORP. (Japan) Type: Hydraulic equipment Model/serial number: S Year of manufacture: 12/1990 Condition: Used, fully functional, with hydraulic filter, valve unit and motor Application: Suitable for machine tools, presses, automation technology 3. hydraulic pump Manufacturer: NACHI-FUJIKOSHI CORP. (Japan) Model: UPV-1A-22M1-2.2-4 Power: 2.2 kW Ibodpfx Asylz D Tsqqoa Type: UNI PUMP - compact pump with integrated motor Connections: Standard industrial thread Construction: Compact unit - ideal for retrofit or replacement Origin: Dismantled directly from MAZAK machining centre Condition: Used, ready for operation, suitable for oil temperature control in hydraulic systems The unit was dismantled from a MAZAK machining centre and was in perfect working order until it was dismantled.

Condition: new, Year of construction: 2021, weight / kg taper MK / Material: iron 200x60x150mm Ibedpfx Aqoy S Dxhoqja Opening size: 150mm Magnetic force: 10-20kg Inventory: 4

Condition: used, Year of construction: 2024, tank capacity / l working pressure / bar feed pressure / bar weight / kg Ibjdpfxeyn R Sxe Aqqsa required space 1,72 x 1,00 x 1,81 m HYDAC hydraulic unit CA2R05H07.4-155-03-20X+3055404+G24-XXX Condition: As new

Condition: used, tank capacity / l working pressure / bar Ibedpjzdvf Iofx Aqqea feed pressure / bar weight / kg required space / m

Condition: used, weight / kg taper MK / Set of 3 clamping blocks with T-slots Ibodovcd N Aepfx Aqqsa Length: 1000mm Width: 80mm Height: 160mm T-slot size: 32 x 18 T-slot height: 32mm Clamping plate – clamping block – clamping table – clamping arm – T-slot plate