Used Veneer Splicing Machine New Condition for sale (99,846)

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Lodox D Tbmopfx Ah Sshn Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2015, functionality: fully functional, Machines connected in one line (all three machines are only sold together): 1. Veneer cross-jointing machine FURNIMASTER FZR-21 2. Direct unloading device DA-12R 3. Scissor lift INCLUDED Veneer specifications Veneer strip length (grain direction) 350 - 2100 mm Veneer strip width (cross grain) 50 - 500 mm Veneer strip thickness 0,3 - 1,5 mm Power data Maximum nominal output / machine cycles 30 cycles/min. Lsdey Tpb Rjpfx Ah Sohn Average production speed 17 - 20 cycles/min. Connection data (Basic machine) Connection power 9 kW Compressed air 6 bar Power consumption Electric energy 6,2 kWh Compressed air 15 NL/min. Dimensions and weight (Basic machine) Length 3500 mm Width 1500 mm Height 1530 mm Working table height 930 mm (+50/-0 mm) Net weight, approx. 2500 kg

Condition: used, Year of construction: 1995, Stand-outreach: 630 mm, table model. Veneer thickness: 0.4 - 2.0 mm. Feed rate: approx. 7 m/min. Operating voltage: 230 V. Dimensions: 880 x 370 x 480 mm. Weight: 35 kg. Storage location: Nattheim. Lsdpfsy Hry Nsx Ah Sjhn

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Ljdpezuzptsfx Ah Sshn Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 Lhsdpfxjw Ed U Ne Ah Sen - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Lhodpfx Ahswz Rife Sjn Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Year of construction: 1995, Max. veneer thickness: 3.0 mm Gluing system: glue application roller with roller heating Disc: Yes, for transporting the veneer across the veneer table. Machine type: stationary Feed rate: 5 - 15 m/min Feed type: stepless Stand overhang: 950 mm Working height or feed table height: 940 mm Description: The glue is applied from below; the outer side of the veneer is always visible, with automatic thickness and tolerance compensation. Approximate weight: 400 kg Dimensions: 1700 x 900 x 1550 mm Ljdpezkh S Hjfx Ah Sshn Motor power: 0.8 kW Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Lodpfx Ahozrnkre Sjhn Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: new, Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, nominal power (apparent): 15 kVA, controller manufacturer: Fanuc, controller model: 0iMF, workpiece weight (max.): 800 kg, total height: 2,875 mm, total length: 4,090 mm, total width: 3,475 mm, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 150 mm, spindle motor power: 11 W, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 140 mm, tool weight: 800 g, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, An ECOM VL10i vertical machining center is immediately available. This is a NEW machine that has never been used in production and has never been installed at an end customer’s site. The machine was purchased in 2021 as part of a stock program designed to ensure immediate availability for customers. This is the last unit remaining in stock, available at our facility and ready for delivery without the usual lead times required for a new machine. The machine is supplied complete with: - 10.4" LCD monitor Lsdpfx Aozcmhxeh Sshn - BT40 direct drive spindle - 24-position tool magazine with swing-arm tool changer - spindle cooling system - 30 bar high-pressure system - refrigeration system - belt-type chip conveyor - rigid tapping

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Lsdjvwfaxspfx Ah Sehn

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features Lhedszuz Hljpfx Ah Ssn - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Lhedpfxszav D Ds Ah Sen Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 140611/3, Fisher + Rückle Gluemaster - glue applying machine. Machine is 100% functional. Lhjdpfx Ahjum R Ago Ssn

Condition: like new (used), TETRA PAK CARDBOARD PACKER CBP 32 VERSION 400 Lhedpfx Ahjya I Sge Ssn YOM 2010 2177 RUNNING HOURS ONLY!! MULTI PACKER FOR 200/250/1000 ml AS NEW CONDITION LOCATION - POLAND READY FOR SHIPPING

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Ledpfx Ahjuna E He Sshn

Condition: used, mileage: 798,990 km, power: 353 kW (479.95 HP), first registration: 05/2004, fuel type: diesel, tire size: 385/65R22.5, tire condition: 60 %, axle configuration: 8x4, wheelbase: 5,700 mm, fuel: diesel, fuel tank capacity: 350 l, color: red, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: parabolic leaf (spring), total length: 8,000 mm, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = - PTO - Radio/CD = Further Information = General Information Year of Manufacture: 2004 Cab: Day Cab Technical Information Number of Cylinders: 6 Axle Configuration Tire Size: 385/65R22.5 Suspension: Parabolic Suspension Front Axle: Tire Tread: 60%; Reduction: Single Reduction Rear Axle 1: Tire Tread: 70%; Reduction: Single Reduction Rear Axle 2: Tire Tread: 40%; Reduction: Single Reduction Rear Axle 3: Tire Tread: 90%; Reduction: Single Reduction Weights Unladen Weight: 12,540 kg Payload: 24,460 kg GVW: 37,000 kg Functional Body Manufacturer: Hydraulic Transport Systems Condition Damage: None = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website: Lodpfjz Ucfzsx Ah Sshn

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Ljdpfsyahv Sjx Ah Sehn Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: good (used), Year of construction: 2005, Console table with vacuum suction plate New control system installed in 2022 (price: €9,000) Lodpfjzhgz Ijx Ah Sshn Control program: Xilog Plus X-axis between stops: 2500 mm Y-axis with milling: 1240 mm Y-axis with drilling: 1080 mm Z-axis: 200 mm (max. workpiece height: 100 mm) Main spindle HSK 63 with 6.5 kW, up to 24,000 rpm 4 tool changers at the front 4 tool changers at the rear Drilling unit External dimensions: 5.8 x 2.8 m

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse JADE 240 Year 2019. Special offer: Machine almost NEW !! Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Edge banding manual adjustable / 2 glue tanks for EVA glue Pressure zone manual adjustable End cutting saw pneumatic adjustable Lsdoxncrvopfx Ah Sjhn Tilting radius milling manual adjustable Corner rounding unit 2-motor manual adjustable Radius scrapers manual adjustable Glue scrapers pneumatic adjustable Polishing brushes Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-60 mm Edge thickness 0,4-8,0 mm Feeding speed 12 m/min. Only 9250 meters edgebanded. Machine almost NEW !! CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: used, see website text Year of manufacture 2026 or Year of manufacture 2025 New floor scrubber, DAEWOO type DAFR70 Electric, battery-powered ride-on floor scrubber Serial no. 25DW07004ALE01 Year of manufacture 2026 Theoretical cleaning capacity approx. 3500 m²/h Working width 560 mm Cleaning brush / scrubbing brush Ø 560 mm Brush speed 200 rpm Suction nozzle width: 800 mm Fresh water tank volume: 70 liters Dirty water tank volume: 70 liters Travel speed 0-5.5 km/h Working time per battery charge approx. 3.5 hours Noise level 65 dBa Climbing ability max. 10% Battery voltage 24 volts Mains connection to the charger 230 volts, 50 Hz, with Schuko plug - Battery charger 24 volts, permanently installed in the cleaning machine Lhodpfez Ek R Ejx Ah Sen - 2x drive battery 12 volts, 100 AH = 24 volts, 100 AH - one cleaning brush Ø 560 mm - two separate tanks for fresh and dirty water - electric motor-driven drive on the front wheel - very maneuverable due to 3-wheel chassis Machine length: 1265 mm Machine width: 600 mm Machine height: 1150 mm Machine unladen weight approx. 200 kg Transport dimensions L x W x H 135 x 98 x 140 cm Transport weight approx. 250 kg New machine, from stock New - Original packaging - unused, from stock

Condition: ready for operation (used), Consisting of: full tools, books and accessories available Technical Data Working range -base machine with electric equipment -in feed unit, MR -book bloc in feed with splitter -gluing unit -pre-heater and heated rounding unit -paternoster with press on unit -belt delivery 370mm x 270mm x 80mm max 125mm x 100mm x 6mm min Lhedpfx Aoq Aufqsh Sen 14 – 36 cycles per minute

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor. Lhodpfjz Eh Nljx Ah Ssn

Condition: used, Year of construction: 2006, operating hours: 10,010 h, Equipment: all wheel drive, MAKE: NEW HOLLAND KOBELCO TYPE: E135SR-1E YEAR: 2006 CE: YES WORKING HOURS: 10,010 HOURS TYRES/UNDERCARRIAGE: 60% POWER: 63 KW ENGINE: ISUZU BB-4BG WEIGHT: 14,100 KG OPTIONS: 14,100 KG MACHINE HYDRAULIC QUICK COUPLER CLIMATE CONTROL FULL PIPING (HAMMER LINES) SORTING FUNCTION TRACKS 60% GOOD Lodpoyzliyjfx Ah Sehn GOOD CONDITION Price is Ex VAT.

Condition: excellent (used), Year of construction: 2022, 400mm swing, 220mm max diameter, 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, Ledpfxez Hatfs Ah Sohn 17kW Spindle Motor, Spindle Speed 4000rpm, 3 jaw chuck, low volt light, coolant, Tool setter, swarf conveyor

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing Features of the Wohlenberg Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure Lsdpfx Ajzw Tzash Sshn – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.