Used Vi Technology 3D5K for sale (28,063)

Condition: used, 5 x Horiba Analyser Units Fsdezvc U Hjpfx Aayepl MEXA-7400 SLE, CVS-7200SLE & MEXA-7500D Analysing Accuracy +/- 1 % Full Scale, Response 2.0 Seconds Analysing: THC,CO,CO2,NOx,CH4. Horiba Analysers With Dilute 3 Phase Bagged Emissions And 2 Direct Raw Sample Lines (Pre & Post Cat)

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-201-08-1422, functionality: fully functional, operating hours: 17,952 h, number of slots in tool magazine: 24, working width: 1,600 mm, spindle motor power: 15 W, number of spindles: 2, working length: 4,760 mm, Machining center with automatic material handling (serial number: 0-205-08-1424) TECHNICAL DETAILS Travel in X-axis: approx. 4,760 mm Travel in Y-axis: approx. 1,600 mm Main spindles: 2 Power of main spindles: 15 kW each Tool interface: HSK F63 Number of drilling heads: 2 Fjdjzx Anfjpfx Aayspl Tool changer: 2 × 12-position MACHINE DETAILS Control system: PC85 / woodWOP Operating hours CNC: 17,952 h EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveyor system Portal handling Vacuum crossbar Conveyor technology C-axes FLEX-5 preparation Automatically positionable vacuum clamps Liquid ring vacuum pumps Note on machine designation: BOF 712/48/16/AP was the actual historical machine type. CENTATEQ E-500 is the later/current model designation, which is now visible on the machine.

Condition: used, Year of construction: 2015, functionality: fully functional, BAC VXC S455 evaporative condenser, 2015, R134a, s/n H150832701 — chiller heat rejection. Used 6 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE Fpedpfxjzz Sido Aayol BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1624, tooth pitch: 1 mm, We offer this new ILPRO Technology I80GF-C saw-blade sharpening and I70 GF setting machine, year of manufacture 2025. Model: I80GF-C sharpening machine for bandsaw blades Serial number: 1624 Year of manufacture: 2025 TECHNICAL DATA: BANDSAW BLADE Width 8-80 mm Thickness 0,4-1,2 mm Fsdpfx Aezudfwoayopl Tooth pitch 1-28 mm Clearance angle 0°-12-20° Teeth/minute 10-100 Model: I70GF setting machine for bandsaw blades Serial number: 1625 Year of manufacture: 2025 TECHNICAL DATA: BANDSAW BLADE Width 8-80 mm Thickness 0,4-1,2 mm Tooth pitch 3-28 mm Clearence angle 0°-12-20° Teeth per minute 120-200 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), functionality: fully functional, A good used 6 station Volumetric cup filler which has been fitted with a variable speed indexing drive and PLC controls - cup volume of 3Litre max in single drop and system capability of multidump set on HMI controls This machine is ideal for filling any free flowing granular product or seeds/pulses - complete on floor stand and supplied with a top sub hopper. Fpodpozzkr Dsfx Aayjl Please request more pictures and videos which can be sent on Whats App Ready to ship worldwide

Year of construction: 2013, condition: used, This listing is for Agilent Technologies 2200 Tapestation The unit is in full working condition and ready for immediate use This automated electrophoresis system provides rapid, scalable analysis of DNA, RNA, and proteins. It accelerates sample quality control workflows using minimal sample volumes Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Fpodszgfpnjpfx Aayel Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: good (used), CNC control, control rack, electronic module Fpodpswt R Irjfx Aaysl -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg

Condition: excellent (used), Year of construction: 2010, operating hours: 70,257 h, functionality: fully functional, overall weight: 645 kg, input voltage: 415 V, We have for sale a 2010 FANUC M-710 iC 50s robot with a 30iA controller in very good condition. please see the photos for run times. just been greased and tested Fsdpozxrqcofx Aayspl

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1261, total width: 8,500 mm, total length: 24,000 mm, total height: 3,650 mm, No minimum price – guaranteed sale to the highest bidder! Two complete filling/packaging lines are for sale, consisting of the following: 2 x B&C (Bertoncello & Cecchin, Italy) pouch filling machines CV 80 DN, manufactured in 1997 2 x Latz palletizers LHP 1800 (new Siemens S7 control system in 2025) 1 x Latz stretch wrapper The lines include various roller conveyors. Fpjdpfx Aozzn I Aoaysl The machines will be dismantled in week 38. TECHNICAL DETAILS Possible sack volumes: 10, 15, 20, 45, 50, or 70 liters MACHINE DETAILS Connection power: approx. 38 kW Overall width: 8,500 mm Overall length: 24,000 mm Overall height: 3,650 mm EQUIPMENT Defect removal belts Roller conveyors Latz stretch wrapper

Condition: used, Year of construction: 2005, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 10910806050010, tank capacity: 350 l, usable tank capacity: 300 l, total length: 1,560 mm, total width: 1,560 mm, total height: 1,100 mm, inner diameter: 300 mm, outer diameter: 450 mm, overall weight: 410 kg, wall material: stainless steel, wall thickness: 12 mm, wall structure: double-walled, manhole location: top, reception height: 600 mm, discharge height: 600 mm, operating temperature: 120 °C, operating pressure: 1 bar, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, The Metos Viking Combi 300E is a high-performance, Finnish-made heavy-duty industrial mixing and cooking kettle. The primary physical, structural, and technical documentation outlines the exact specifications for this 300-liter model: 📐 Dimensions & Clearance: Width: 1,560 mm Depth: 1,100 mm (varies up to 1,165 mm depending on the specific safety lid protrusion). Height: 900 mm to the kettle lip / 1,535 mm total height including the elevated control pillar. Tilting Discharge Height: 600 mm clearance from the floor when tilted. ⚖️ Weight: Net Weight (Empty): 410 kg (Standard 4G model) / Up to 414 kg depending on the configuration of structural sub-surface installation frames. Shipping Weight: Approx. 545 kg packed. ⚡ Electrical & Heating Power Voltage Requirement: 400/230 V, 3NPE, 50/60 Hz Total Power Consumption: 43.6 kW Amperage/Fuse Size: 80 A Heating System: Steam-jacketed indirect electrical system (maximum working pressure of 1.0 bar, yielding up to +120°C inside the jacket). Fpsdpfx Aszzxyisayjl 🚰 Utility Connections: Cold Water (CW): R½" (Ø15 mm) connection. Hot Water (HW): R½" (Ø15 mm) connection. Connection Heights: Water inlets enter at roughly 270 mm from the floor; the main power cable input gland enters at 510 mm. ⚙️ Operational Features: Integrated Mixer: Stepless variable mixing speeds from 20 to 110 RPM with an auto-reverse program and structural scrapers. Tilting: Smooth, heavy-duty electrical motor-driven tilting mechanism.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 325, overall weight: 350 kg, fuel type: electric, color: white, total length: 4,000 mm, total width: 1,000 mm, total height: 1,550 mm, PSA HSA2500 semi-automatic sleeve cutting system for cardboard sleeves Features: Manual sleeve loading Automatic clamping Automatic feed Automatic length measurement Automatic cutting process PLC control with display Fpodjy Nyb Tspfx Aayel Storage of up to 50 different sleeve lengths and 3 quantity settings Suitable for: Paper sleeves and plastic sleeves with a diameter of 50 to 200 mm Maximum sleeve length: 2500 mm The system is equipped with a 76 mm spindle.

Condition: good (used), 1 x Coating Drum 4m long. Fpjdpjzz It Sofx Aayjl Infeed diameter 750mm. Outfeed 1m

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, total length: 9,720 mm, total width: 2,300 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. Fpodpfx Aaoy Hi D Seyel The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1979, MAN 19 280 F BREINING body FEDERAL Emulsion / Asphalt Sprayer Note: Suitable only for emulsion, not for liquid asphalt! Control panel for the superstructure located in the cab! Fodpjwmpcnofx Aayopl • Manual transmission • Differential lock • Long-distance cab • 1 bunk • Leaf/leaf suspension • Tyres: 12 R 22.5 (alternative: 315 / 80 R 22.5) • Tank capacity: 6,000 litres emulsion • Burner NEW! • Spray bar foldable on both sides! Errors and prior sale excepted! = More information = Fuel type: Diesel Mileage: 67,000 km Applicable material: Asphalt Damages: Damaged vehicle (not drivable)

Condition: used, KRONES ROUND GLASS LINE 500/600BPM 700ml, 750ml, 1 Litre STORK MINIATURE LINE 200 BPM 50ml Glass & PET BERTOLASO LINE 200BPM 200ml, 300ml, 375ml, 500ml Glass & PET Fpedpozrf A Eofx Aayel STORK GLASS LINE 200BPM 350ml, 700ml, 750ml, 1.14 Litre

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, machine/vehicle number: 90300934, CLC 600 Docter machine Fsdpfx Aaoy D H Rdsyopl Unwind 600 mm Rewind 600 mm

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BR-BTRS-100-250003, As-new Brinkmann Technology BTRS100 screw conveyor, year of manufacture 2025, equipped with control unit, flushing valves, adapter pieces, adjustable motor power, and Easy-Clean cleaning package. We have only tested the screw conveyor. Due to a change in technology, it has never been put into operation. Manufacturer: Brinkmann Technology GmbH Year: 2025 Type/Model: BTRS100 Fpodpfx Asytql Nsayol Designation: BTPS100 pipe screw conveyor Serial number: BR-BTRS-100-250003 Power: 1.5 kW Original price: €13,000 (net) Further documents (technical drawings, operating manual, invoice, etc.) available upon request. If you have any questions or require more information, feel free to send us a message or call us.

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Fedpoyh Na Esfx Aayspl

Year of construction: 2001, condition: used, Indirectly driven conveyor vibrator suitable for transporting food products. The vibrator is made entirely of stainless steel, with the exception of the drive units and spring leaves. Vibrating pan width: approx. 850 mm Vibrating pan length: approx. 7,100 mm Drive: 2 x unbalanced motor Fpsdjzmfqrjpfx Aayel

Year of construction: 2018, condition: excellent (used), Type: Low Voltage Distribution Board / MCCB Panel Installed equipment Fedpozlii Njfx Aayspl 1 × Schneider Electric Compact NSX400NA main incomer Main incomer rating: 400 A 3-pole configuration Ui: 800 V Uimp: 8 kV 4 × Schneider Electric Compact NSX160F outgoing MCCBs 4 × Schneider TM125D thermal-magnetic trip units Outgoing MCCB rating: 125 A each Breaking capacity: approximately 36 kA at 415 V 1 × additional Schneider / Merlin Gerin outgoing device rated 125 A 1 × additional Schneider / Merlin Gerin outgoing device rated 63 A Three-phase L1/L2/L3 distribution Internal busbar system Labelled outgoing circuits Spare internal capacity / blanked positions Heavy-duty floor-standing steel enclosure Lockable double front doors The board appears complete and is in good visual condition. Operational testing and final electrical inspection should be carried out by the purchaser before installation. Available for inspection. Additional photographs and technical information can be provided.

Condition: ready for operation (used), Year of construction: 2007, total height: 2,450 mm, travel distance X-axis: 3,090 mm, travel distance Y-axis: 1,540 mm, overall weight: 8,400 kg, table width: 3,000 mm, table length: 1,500 mm, controller manufacturer: FANUC, controller model: FANUC 16I-PB, This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information. Additional equipment • Integrated Auto-Index system • Automatic tool change system with 15 stations • Waste extraction system at the die • Pedal for opening/closing sheet clamps • Pedal for single punching operation • Automatic collision prevention for tilting parts and cutouts • Interactive CAD with export function • Import of CAD drawings in common formats • Interactive nesting (freehand, bump nesting) Fpsdpfx Aezn Hk Neayol • Automatic positioning of special tools Machine Benefits Qualitative Machine Benefits • Maximum punching diameter with technology tools: 100 mm • Maximum punching diameter with trumpf tools: 80 mm • Maximum punching and nibbling thickness: 6 mm • Automatic tool sharpening recovery: 10 mm • Tool change time: 4 seconds • Automatic sheet metal processing, including residual grid destruction Technical Machine Benefits • Workpiece repositioning: automatic • C-frame structure: c-frame (schwanenhals) • Operating manuals included • Technical support available • Processable sheets with automatic repositioning: 1500 x 6000 mm • Steel and ball plates for sheet metal support • Front horizontal plane for sheet metal unloading • Number of stored stations: 15 • Number of rotating stations: 15 Extra Information Machine still under power Dimensions Machine Depth 6190 mm

Condition: used, This listing is for ATI Porta Sens 11 Gas leak detector The unit is in full working condition and ready for immediate use. Reliable handheld gas monitor designed for efficient leak checks across laboratory facilities. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility Fodjxv Dh Iopfx Aayopl • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2019, condition: good (used), Saroseal VI-2520 Vacuum / Gas Seal Machine The SaroVac VI machines use MSB technology. The Modular Sealing Bar system is an innovation that makes it possible to change the sealing bar width within a few minutes. All temperature, time and closing pressure settings are automatically adjusted to the change in width! Maintenance of the used sealing bar can be carried out in parallel without any problems, and the packaging process can continue. Manufacturer: Saropack Model: VI-2520 Year: 2019 Max. seallength: 2.500 mm Fsdjx Ifqkjpfx Aayspl Max. welding width: 8 mm Max. film thickness: 50-100 my Power 3x 400V / 50Hz / 3,6kW Vacuum Pump: Becker 300m3/h Machine Dimensions LxWxH: 2.750x1.400x1.850 mm Machine Weight: 500 kg.

Condition: used, Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, machine/vehicle number: HS6434, path measurement accuracy: 620 mm, type of input current: AC, total width: 620 mm, total length: 3,820 mm, total height: 700 mm, overall weight: 300 kg, input voltage: 230 V, The Cox & Plant HS6434 is a high-performance, industrial-grade electromagnetic vibratory conveyor designed specifically for the hygienic handling of bulk solids, particulates, and fragile products. Manufactured in 2015, this unit represents the pinnacle of Cox & Plant’s specialist engineering in efficient, low-maintenance food and chemical processing technology. Utilizing a precise 6mm stroke amplitude driven by heavy-duty electromagnetic coils, the system offers instantaneous start/stop control and eliminates the mechanical wear components (like belts, bearings, and eccentric drives) common in traditional conveyors. Fpjdpfx Ajzz Ax Aeayol

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 13,979 h, machine/vehicle number: A3231E0532, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 4,541 h, laser power: 24,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 60 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 24 kW (2023) High-spec 2D fiber laser cutting machine, one owner from new. 3000 x 1500 mm working area. Siemens Sinumerik 840D SL control with 21.5" multi-touch display. In daily production and under TRUMPF maintenance contract from new. Key data Machine No.: A3231E0532 Year of manufacture: 09/2023 Laser source: TruDisk 24001 (external, separate energy supply) Laser power: 24,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 60 mm / stainless 60 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight: 7,650 kg Supply: 400 V 3~ / 50 Hz, 22.0 kVA, 3 x 63 A Hours: 13,979 h operating / 4,541 h laser-on Fodpfezz Sd Uex Aayjpl Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (right). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle cleaning. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Mild steel slats, 67 mm spacing. Slag cart under pallet changer. Cleaning brush. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Automatic nozzle centring. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK 840D SL. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Nanojoints. Oseon Go. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package, gas mix cutting package (N2/O2). Gas Witt gas mixer unit with hardware gas mixer for two gases, plus additional cutting gas connection. Pallet changer / automation Automatic heavy-duty pallet changer in longitudinal direction. LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB interface. RJ45 network interface. Central Link. Remote support. Installation Currently installed on a mezzanine. Mezzanine steel structure not included in the sale. Condition and availability One owner from new, used in daily sheet metal subcontract production in Braintree, Essex. Under TRUMPF maintenance contract from new (two services per year) and still covered - full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available on request. Enquiries Full TRUMPF order confirmation, service history, hours report, cut samples and video of the machine running available on request.