Used Wafios Barbed Wire Machine for sale (65,608)

Condition: reconditioned (used), Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, empty load weight: 2,450 kg, Machine fully cleaned, inspected, and tested. Available for viewing at our premises in Semsales (Switzerland). Wire guides, 0.25 mm. Bedpfszf Akyex Ahvewp Large bobbin kit.

Condition: used, Year of construction: 2008, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2008 Control : Sonstige Movement X/Y/Z : 550/350/400 mm Workingspace: Movement in X/Y/Z:550/350/400 mm Movement in U/V:550/350 mm Table size:900 x 600 mm Workpiece dimensions (max.):1.200 x 700 x 400 mm Load capacity (max.):1.500 kg Dielectricheight (min./max.):0/435 mm Clearance angle (max.):+/- 45°/400 mm Bwodezbzb Ropfx Ahvsp Generator: Technology:ISOPULS-Doppelquellengenerator Cutting speed:400 mm²/min Finest arbitration:0,20 μm Ra Wire: Standard diameter:0,25 mm Wire guiding:Closed diamond guides Equipment/Accessory: Tankcapacity:1.200l Dielektrikum Dielektrikumsmanagement I:Filtercartige Dielektrikumsmanagement II:Chiller, Eckert Setup operations:Electronic Handwheel Workpiececlamping:Clampingjaw, EROWA Further Accessory:Misc. Electrodeholder, clamping devices and Erodingwire : Attention:The displayed Deionisationsfilters are not included in our offer.

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 18950 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm Bedpfxewzyvhs Ahvswp U 350 mm V 220 mm Year 2005

Condition: used, Year of construction: 2007, Travel distance: X 500 mm Y 350 mm Z 300 mm Water bath machine Bwjdouu Dl Rjpfx Ahvep Automatic wire threader

Condition: excellent (used), Year of construction: 2016, X-axis: 550 mm Y-axis: 350 mm Z-axis: 400 mm Max. workpiece dimensions: 1,200 x 700 x 400 mm Bedpjzcpifjfx Ahvewp Max. workpiece weight: 1,500 kg Machine weight: 2,850 kg Cutting range: 30 degrees on 400 mm Includes operating manual. Machine can be inspected while powered on.

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Bsdpsyxfqrofx Ahvewp Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Electrical Data: 400V; 21.5A Weight: 3500 kg Water Tank Size: 750 x 780 mm Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Width: 1320 mm Depth: 1460 mm Height: 1360 mm Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine Bwjdpfxsw Spa No Ahvep AGIE - Agiecut Progress 3

Condition: excellent (used), Year of construction: 2014, functionality: limited functionality, X-axis: 400 mm Bwodpfx Aheyvtbysvsp Y-axis: 300 mm Z-axis: 220 mm The machine was in daily use until mid-April; however, the "automatic threading" function is not working.

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 3,000 mm, total width: 2,300 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servo motors Glass scales in X and Y axes Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15“ TFT touch screen monitor Handheld remote control Automatic wire threading with thermal wire cutting, Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English Bwsdozhvhwspfx Ahvsp Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 230 x 300 x 200 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: € 2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 3,000 mm, total width: 2,300 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servo motors Glass scales in X and Y axes Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15” TFT monitor Handheld remote control Automatic wire threading with thermal wire cutting Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English A horizontal rotary axis (6th axis) is included. This was removed due to lack of need and was not in use. Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 230 x 300 x 200 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: €2,000.00 Commissioning, price based on effort Basic training, price based on effort Bwjdezhvhdepfx Ahvep

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances Bwodpfx Ahey Snbmjvop - X-axis: (mm) 500 - Y-axis: (mm) 350 - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 14 calibres, ranging from a maximum diameter of 11 mm to a minimum diameter of 3.5 mm Bwodpfjy Ubthox Ahvsp Weight: 260 kg In very good, well-maintained condition

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Bwedsza U Nlspfx Ahvjp Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: good (used), Year of construction: 2015, functionality: fully functional, GF AgieCharmilles CUT 2000 S Wire EDM Machine – Year 2015 – EROWA Tooling Package High-precision CNC wire EDM machine from GF AgieCharmilles in excellent technical condition. Manufacturer: GF AgieCharmilles Model: CUT 2000 S Year of manufacture: 2015 Bwjdpfx Aezgvl Tohvsp Axis travels: X-axis: 350 mm Y-axis: 250 mm Z-axis: 256 mm Maximum workpiece size: 750 × 550 × 250 mm Maximum workpiece weight: 400 kg Machine hours: Operating hours: 73,182 h Erosion hours: 16,508 h Technical data: Power supply: 3 x 400 V Machine weight: approx. 3,500 kg Equipment: • Automatic wire threading • CNC control system GF AgieCharmilles • Complete EROWA tooling package included • Multiple EROWA fixtures and clamping elements • Precision EDM tooling and accessories (see photos) Advantages: • Very reliable EDM machine for tool and precision part manufacturing • High cutting accuracy and excellent surface finish • Modern GF AgieCharmilles control system Condition: The machine is in good working condition. Machine is currently powered and can be inspected and tested under power. Location: Czech Republic Availability: Immediately

Year of construction: 1998, condition: ready for operation (used), X-axis: 500mm, y-axis: 350mm, z-axis: 256mm, taper cutting device: U=70mm, V=70mm, connected load: 9kVA, rated current: 13.1A, weight: 4.4t, equipment: automatic wire threading, lowering water tank, universal clamping frame, hand-held control unit, AgieSetup 3D automatic workpiece position compensation, flushing gun, paper cartridge filter and Lei/Wirecut programming software with dongle. An on-site inspection is possible. Bedpezadkxofx Ahvjwp

Condition: new, functionality: fully functional, Crimp force controller. Bwsdpfsy Ivdbjx Ahvsp

Condition: good (used), Year of construction: 2002, functionality: fully functional, Gamma 333 fully functional. Bwjdpfx Ajy Ah R Nshvjp

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Bedpfx Ajy N Df Nshvjwp

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. On site viewing and inspection recommended Bwjdjx R Uzdepfx Ahvjp

Condition: used, Year of construction: 1963, functionality: fully functional, machine/vehicle number: D06L/7457, Offer Number: D06L/7457 Machinetype: wire and strip bending machine Make: BIHLER Type: RM25 Constr. year: 1963 dia. range: 0,5-2,5 mm width of band: 50 mm feeding length: 170 mm number of slides: 5 punching power: 5 to Bwedpfewi S Rtsx Ahvsp output - pieces/min: 225 Location: In our warehouse

Condition: good (used), Year of construction: 2001, Travel ranges X / Y / Z: 220 x 150 x 150 mm Z-axis unit: Standard equipment (= 5th axis) Max. taper angle: 15° (for a workpiece 100 mm thick) Bedpfxog Icdye Ahvjwp Taper machining unit: Standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 – 0.25 mm Dimensions L x W x H: 1900 x 2345 x 2060 mm Weight: 3500 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Bodpfxey R Dtcs Ahvewp

Year of construction: 1985, condition: refurbished (used), Dimeter range- 4-10mm Cutting lenght - 2,0 m ,(possibly longer) Bedodt Arlopfx Ahvjwp Speed -90 m/min. Reconstruction- 2018 Control - PLC Siemens Double mechanic pay off wire

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. Bwedjyubh Ropfx Ahvep They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Bodpfx Aher Nfvmevjwp Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight