Used Weingarten Eccentric Press Weingarten 80 Ton for sale (32,568)

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control Ljdet Ei Hnspfx Aiferp

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m Lodju N Dfhopfx Aiferp - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! i.D. *

Condition: refurbished (used), MAE Hydraulic Press 25 Ton Details Manufacturer: MAE. Type: HY-S25. Condition: Refurbished. Lredpozd Shfsfx Aifsp Specifications Press force: 25 tons Frame type: C-frame Drive: Hydraulic Stroke: approx. 400 mm Table surface: approx. 800 × 500 mm Motor power: approx. 5.5 kW Hydraulic tank capacity: approx. 140 liters Operation: Two-hand operation. Dimensions Length: approx. 950 mm. Width: approx. 1700 mm. Height: approx. 2900 mm. Weight: approx. 4000 kg.

Condition: excellent (used), functionality: fully functional, pressing force: 2,000 t, clearance between the columns: 5,100 mm, retraction force: 130 t, HYDRAULIC PRESS LOIRE SAFE mod. EDIMC 2000 Maximum force adjustable slide Ton 200 to 2,000 n. 04 Cylinders Net slide return force Ton 130 Maximum piece dimensions mm 5,000 x 2,800 x 1,700 Maximum piece weight kg 60,000 Upper part weight Kg 35,000 Slide stroke mm 1,500 Maximum clearance between worktops mm 2,500 Minimum clearance between worktops mm 1,000 Front distance between uprights mm 5,100 Lateral distance between uprights mm 2,000 Moving Bolster Front: Front mm 5,000 Lateral mm 2,800 Plan height above zero level mm 650 External stroke mm 4,000 Capacity Ton 60 Slide Plane: Dimensions mm 5,000 x 2,800 Number of guides n° 8 Guide height mm 1,800 Lower blank holder cushion (6 cylinders, force 600-6,000 kN) Upper slide cushion (force 300-3,000 kN) Lrodpfxswlgr Ro Aifjp Spark plug diameter (40 mm) and center distances (150x150 / 200x200 mm) Working speed: Minimum mm/sec 3 Maximum mm/sec 110 Approach mm/sec 400 Return mm/sec 350 Stop time ms 219 Safety distance mm 438 Weight without tools kg 365,000 USED MACHINE

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm Ljdpozkmi Dofx Aiferp (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: good (used), Manufacturer: DIGÉP Lrsdjm Uc R Aspfx Aifjp Tip: SD 100

Condition: used, Russian manufacturing, Lrodpjxbf Sfjfx Aifop Max. pressing force: 25 t Table size: 550 x 400 mm

Condition: used, Year of construction: 1974, machine/vehicle number: 4139, functionality: fully functional, pressing force: 80 t, stroke length: 140 mm, table width: 530 mm, table length: 750 mm, ram plate width: 335 mm, ram plate length: 440 mm, Equipment: documentation/manual, For sale is a robust eccentric press from Beutler Maschinenbau with approximately 80 tons of pressing force. The machine is ideally suited for punching and forming operations. Specifications: • Table area: approx. 750 x 530 mm • Ram area: approx. 440 x 335 mm • Ram adjustment: approx. 150 mm • Stroke: adjustable from 20 – 140 mm • Max. installation height: approx. 320 mm • Table opening: approx. Ø 230 mm Sold without warranty, ex works. The machine will be delivered without electrical power and compressed air connection. Lodpfjzb Eaqjx Aiforp Payment before collection.

Condition: good (used), Year of construction: 1960, functionality: fully functional, Weingarten Eccentric Press ER 80 – 80 tons – Year of manufacture 1960 For sale is a robust WEINGARTEN eccentric press, type ER 80, manufactured in Germany. Technical specifications: Manufacturer: Maschinenfabrik Weingarten A.-G. Type: ER 80 Pressing force: 80 tons Lrodozkhnnjpfx Aifsp Stroke rate: 60 strokes/min Adjustable ram stroke: 8–112 mm Ram adjustment: 80 mm Year of manufacture: 1960 The machine is in used condition, commensurate with its age. Ideal for metalworking, stamping, and forming operations. Inspection possible by arrangement. Sale from the current location; the seller will handle loading, and the buyer will organize transport.

Condition: good (used), Year of construction: 1982, Hydraulic press JKM Kindsmüller UPS 100 E – 110 tons For sale: a hydraulic workshop/industrial press, JKM Kindsmüller, type UPS 100 E. Technical specifications: Lsdpfey Unl Rex Aiforp * Pressing force: 1100 kN (110 tons) * Operating pressure: 283 bar * Stroke of upper piston: 700 mm * Year of manufacture: 1982 * Control system overhauled/renewed in 1992 * 400 V connection The machine can be inspected by arrangement.

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Ljdpfxewp Nv Hj Aifjrp Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Year of construction: 2010, condition: good (used), Make: Hegenscheidt MFD Type: PR 250 / 1000 Control: Siemens TOUCH Year: 2010 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Specifications Metric US Standard Centre height 550 mm Max. wheel tread Ø 1100 mm Max. wheelset length 2500 mm Max. pressing force 250 T Max. cylinder stroke 500 mm Cylinder Ø 300 Working speed 10 - 80 mm/min. Pinole feed 1300 mm/min. Return speed 1300 mm/min. Dimensions (Estimate) Length 6100 mm Width Lrodpokvnggjfx Aifep 5730 mm Height 3750 mm Weight 15900 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), pressing force: 100 t, total width: 3,000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Lredpfjvwcdusx Aifep Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Year of construction: 1980, condition: good (used), Make: SCHARMANN Type: TDV 80 Year: 1980 Portable / Transportable with levelling schoes AWF Fixatoren ROD Heidenhain indexing scale with Dro Left and Right rotation in 3 indexing feed rates Power 18 kW Quick posititining fixed angle 0-90-180-270 Gr Specifications Metric US Standard Table Length 3500 mm Lrodpjmb Urdjfx Aifop Table Width 3500 mm Table load 80000 Rotation B-Axis 360000 ° Dimensions (Estimate) Length 6000 mm Width 3500 mm Height 1400 mm Weight 28000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 8900, functionality: fully functional, pressing force: 20 t, stroke length: 60 mm, throat depth: 176 mm, ram adjustment: 55 mm, stroke rate (max.): 155 1/min, TECHNICAL DETAILS Press force: 20 t Stroke rate: 155 strokes/min Ram stroke: 6 - 60 mm Ram adjustment: 55 mm Ram contact area: 130 x 248 mm Pin hole in ram: 25 x 65 mm Inclination: 28° Lrodpszb Du Hofx Aifep Overhang: 176 mm Distance from table to ram: 270 mm Passage width: 470 mm Table dimensions: 300 x 450 mm Through hole in table: 90 mm Table height above floor: 775 mm Air pressure (required): 5.5 - 6 bar MACHINE DETAILS Total power consumption: 3.5 kW Control type: conventional Dimensions & Weight Machine dimensions (L x W x H): 1,300 x 1,100 x 1,950 m Machine weight: 1 t EQUIPMENT High-performance press Central lubrication with light curtain (monitored) Linuflex Stroke counter Steel plate (dimensions: 315 x 400 x 50 mm) with center hole (diameter: 63 mm)

Condition: new, Year of construction: 2024, Are you looking for a powerful press brake that can handle even the most demanding tasks? Then the Durma press brake AD-S 803000 with a pressing force of 3000 tons might be the perfect solution for your needs. With an impressive length of 8 meters and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with the highest precision. The installation height of 1000 mm allows for flexible and convenient positioning of the workpiece. The heart of the machine is the DELEM-DA 66T movable control system, which ensures intuitive operation and precise control of the workflow. Furthermore, the press brake is a custom-made design and can be configured according to customer requirements to meet all individual needs. If you are interested in the Durma press brake, we would be happy to provide you with personal advice. Other machines are also available and can be inspected. Please contact us for more information and let us work together to find a customized solution for your needs. Control type: DELEM DA-66T Protection oil: suitable for sea transport Front safety system: FPSC (MANUAL) Sheet metal support systems: Movable support arm Stroke: 750 MM Back gauge type: X=1500 X, R Overhang: 1050 MM Crowning: Hydromechanical Ledpfx Aiji Da Sysforp Installation height: 1000 MM Power: 400V 50HZ Body type: Welded frame Lower tool holder: DURMA Wide

Condition: new, Year of construction: 2024, Everything can be configured according to your requirements, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data: Bending force: 600 tons Bending length: 6050 mm Distance between uprights: 5100 mm Stroke: 365 mm Installation height: 700 mm Overhang: 510 mm Table height: 990 mm Table width: 154 mm Y rapid traverse: 80 mm Y working speed: 7 mm/sec. Y return speed: 80 mm/sec. X-axis working speed: 350 mm/sec. R-axis working speed: 300 mm R-axis travel: 250 mm X-axis distance: 750 mm Motor power: 55 kW Length: 8050 mm Width: 3200 mm Height: 4250 mm Weight: 72000 kg Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor for back gauge & linear guided ball screw system (X-R) CNC crowning European-style tool clamping system Adjustable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard Electrical equipment according to worldwide standard Optional equipment Control unit - ModEva Premium, 69T and 66T Lodpfx Aiofir U Njferp CE Manual F. AKAS II M FPSC-B-C + safety guards with switch CE F. AKAS-LC II AKAS-3 M Motorized + FPSC (Safety PLC) CE BLVT safety – only for tandem machines Z1, Z2 axes X1, X2 axes R1, R2 axes Delta X-axis, +/- 250 mm stroke or +/- 125 mm CNC controlled X-axis = 1000 mm – rear protection with light curtain AP3-AP4 bending aid Height-adjustable laser angle measuring system Quick clamping system Hydraulic and pneumatic tool clamping system Upper and lower tool Lower tool positioning system Parking area Central lubrication system Oil cooler Additional back gauge finger and additional adjustable support arms Special packaging for overseas transport Request more information

Condition: new, Year of construction: 2024, Everything can be configured according to your requirements, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical specifications available upon request. AD-R 80400 Bending force: 400 tons Bending length: 8050 mm With over 60 years of experience in the research and production of machines for sheet metal processing, and with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned producers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on-site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to offer you services related to training and customer support. We would be happy to support you from Germany – from consulting to purchase and throughout the entire life cycle of your machine. With our German branch, we are always on-site to respond quickly and efficiently when you need us. Ljdpfsfin N Ssx Aiforp Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: used, functionality: fully functional, COLMAL hydraulic press brake 3000x250 ton, 4 axes, throat 300 mm. Dimensions: 380x350x180 (H) cm, weight 14,100 kg. Ljdpfewyng Sex Aiferp

Condition: like new (used), Year of construction: 2022, pressing force: 80 t, Bystronic Xpress 80/2100 Hydraulic Press Brake Manufacturer: Bystronic Model: Xpress 80/2100 Serial Number: Xpress 22334EU Year of Manufacture: 10/2022 Ljdpfsy U I Tusx Aiferp Technical Data: Maximum Press Force: 800 kN Maximum Working Length: 2100 mm Maximum Stroke: 200 mm Machine Weight: 6000 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, pressing force: 315 t, stroke length: 300 mm, Equipment: CE marking, Table dimensions (x-y/mm)  2150 x 1200 Ledpfx Aezi Rbbsiferp Ram dimensions X-Y (mm)  2000 x 1200 Stroke (mm)  300 Slide adjustment (mm)  200 Strokes per minute  5 - 50 Side window dimensions (x-y/mm)  800

Condition: good (used), Year of construction: 1963, functionality: fully functional, Weight: 7,000 kg Pressing pressure: 180 t Spindle press machine Weingarten P 160 Manufacturer / Year of production: Weingarten A.G. / 1963 Type / Serial number: P 160 / 715/61 Electrical connection: 400 V / 10 kW Ljdpfszlg Tljx Aifsrp Maximum stroke: 350 mm Minimum stroke: 120 mm Clamping surface: 600 x 600 mm Comment: The press is equipped with a mechanical safety system, is still in operation, and can be tested. Documentation is available.

Condition: used, Year of construction: 2021, Used metal stamping press ALP-25J (25T, 2021) for sale. Condition: used, good condition. Can be tested. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25J Year of manufacture: 2021-04 Compact and reliable mechanical eccentric stamping press designed for forming, cutting, blanking, and stamping various metal parts. Lredozktuaopfx Aifjp Technical specifications: Nominal capacity: 25 T Stroke: 65 mm Stroke frequency: 100 strokes/min (SPM) Max. die height: 260 mm Height adjustment: 55 mm Slider working area: 560 × 370 mm Table (bolster) area: 250 × 220 mm Country of origin: China Weight: 800 kg Application: The ALP-25J press is suitable for: stamping, cutting, bending, and forming metal parts; small pressing operations in the production of tools, metal structures, and automotive parts; working with thin and medium-thickness sheet metal. If you have any further questions, please do not hesitate to ask.

Condition: excellent (used), Year of construction: 1990, Single-action eccentric press ERL 125 HELMERDING 1990. Ledpfx Aozlb Hmeifsrp

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Lsdpfx Aiey Tptajforp Machine year of manufacture: 1970 Cylinder No.: 6017 Cylinder stroke: approx. 600 mm Operating pressure: 320 bar Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Cylinder diameter: 255 / 370 / 390 mm Overall length with piston rod retracted: approx. 1350 mm Piston rod extension: 70 mm - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg The hydraulic cylinder is used and comes from a warehouse clearance.