Used Z73-4/454 for sale (57,793)

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights. Nwjdpfsfdkb Tjx Anfef

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Nwsdpfxed Tqalj Anfsf We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Nwodpfx Aefdkb Uonfsf Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany Nwedpfx Anjguk A Hsfef - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Nwedpfjfdkbhsx Anfof - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone Nwedpfx Asguk Dkonfef - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: Nwedpfx Ajguk Dvjnfef - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 6 mm length 450 mm 40 pieces in a package Nedpshhyitsfx Anfswf 6 packages available 95 Euro per package

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 Nodpfx Anshhyizsfswf diameter 3,25 mm length 350 mm 120 pieces in package 2 packages available 95 Euro per package

Condition: used, mileage: 420,520 km, power: 425 kW (577.84 HP), first registration: 02/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, loading space length: 5,700 mm, loading space width: 2,500 mm, Equipment: ABS, air conditioning, navigation system, parking heater, * Sun visor * Driver airbag * ABS (Anti-lock Braking System) * ASR (Anti-Slip Regulation/Traction Control) * ESP (Electronic Stability Program) * Rain sensor * Adaptive cruise control * Active Brake Assist * Roll Stability Control Njdpoyw Da Ajfx Anfewf * Attention Assist * Lane Keeping Assist * On-board computer * Auxiliary air conditioning (parking A/C) * Auxiliary heating (parking heater) * Cruise control * Air horns * Hill start assist * Electric window regulators * Electrically adjustable mirrors * Mirror heating * Central locking * Fog lights * Automatic driving lights * Cornering lights * Electric vent roof hatch * Driver comfort seat * Seat heating * Cool box * Rear axle differential lock * Lift axle * Amber beacon * High-mounted air intake * Alloy wheels * Trailer coupling * 2-line air connection * Radio * Navigation system * 12-speed * Suspension: leaf/air * Payload: 7,950 kg * Continuous brake: retarder ----Special equipment: Crane. Fassi F 455 A.2.24 E-Dynamic, folding, radio remote control, 4-stage hydraulic extension (working height approx. 15.5 m), fully hydraulic 4-point support, oil cooler. Read load chart: Lifts at 2.85 m - 13.5 t, 4.35 m - 9.5 t, 6 m - 6.535 t, 8.15 m - 4.7 t, 10.15 m - 3.6 t, 12.15 m - 3 t. ----Superstructure: Open platform with bulkhead, hardwood/steel floor, lashing rings, 1 pair of container locks at front, insertion pockets for stake pockets. Loading height approx. 1,090 mm----Interior style package, leather steering wheel, tinted windscreen, axle load measuring system Sale to businesses only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!! ALL INFORMATION IS WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. All sales contracts, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (see legal notice/imprint).

Condition: new, Year of construction: 2025, I sell here several machines, devices, etc. for woodworking, forklifts, work platforms, as well as accessories and spare parts. Therefore, they necessarily also note my other auctions! Format circular saw table circular saw carpenter circular saw format saw WH- machines Type: Z45 - 400E Professional New wide aluminum format carriage 320 cm with carbide round bar guide system width approx. 415 mm cantilever table with extendable aluminum cutting fence, incl. 2x folding fence cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the saw unit. Electric tilting of the saw blade up to 45 with digital display of the tilting angle. Precise tilting segment guide of the saw unit. rip fence up to 125cm with fine adjustment stable 50 mm round bar guide Njdoh Hauyepfx Anfswf parallelogram protection device with upper suction can be folded away for standing workpiece cuts. 2 different speeds adjustable ( 4000/ 600rpm) saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer with 120 mm scoring saw blade and electrical height adjustment Engine power main engine 5,5 KW with overload protection and thermal monitoring. Motor power scorer 1,1KW Body made of sturdy 6mm box construction with reinforcement Stable cast iron worktop incl. trimming wedge and eccentric workpiece holder The machine can also be purchased via installment plan with a term of 36 months. This offer is an installment plan leasing offer via the company DLL Leasing with a term of 36 months. Credit check and processing is done by DLL Leasing. Further terms and conditions on request. For further data, delivery times and availability please ask. Depending on availability, the machine can be inspected and tested at our warehouse. prior inspection is expressly desired, just leave tel. no. by mail, then I will get back to you about a viewing appointment. Subject to prior sale, All information without guarantee. The machines can be picked up yourself or shipping by forwarding at the expense of the buyer. Loading and packing can be organized by us. The shipping costs are a guideline, depending on distance and unloading possibility, they may vary, please inquire. An invoice with sales tax will be issued.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting height (max.): 400 mm, cutting width (max.): 400 mm, total height: 1,720 mm, total length: 2,600 mm, total width: 2,400 mm, overall weight: 2,200 kg, table height: 700 mm, cutting range round steel at 90°: 400 mm, feed length X-axis: 600 mm, saw band length: 5,700 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsawing machine in heavy-duty construction, with a horizontally parallel traversing saw blade, designed for cutting profiles, pipes, and solid materials of all grades, including extremely tough-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. The saw unit is constructed in a fully solid design from polymer concrete, providing maximum running smoothness and service life for the saw blades. Guidance of the sawing unit is via two vertical square columns (double-column guide) with hardened and ground guide rails. Mechanical saw band tensioning with preloaded carbide saw band guides. Material clamping is performed by two horizontal frame clamping vises. Material feed is via a non-driven roller conveyor integrated into the machine with twelve transport rollers, enabling easy transport of short offcuts. Nwjdpfx Ajupvrxenfef Year of manufacture: 2008 Cutting range round: 400 mm Cutting range square: 400x400 mm Material feed (automatic): 600 mm Multiple material feed: 99,999 mm Cutting speed (infinitely variable): 20–130 m/min Total drive power: 7 kW Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material support height: 700 mm Saw band dimensions: 5,090 x 41 x 1.3 mm Minimum cut length in automatic mode: 6 mm Remaining piece length in automatic mode: 80 mm Voltage: 380V/50 Hz Dimensions (LxWxH): 2,600 x 2,400 x 1,720 mm Weight: 2,200 kg Equipment: • Coolant system • Full enclosure • CNC control • Standstill monitoring • Side guide rollers • Height measurement system • Light barrier

Condition: used, Year of construction: 2021, operating hours: 1,250 h, Magni DTB 24 RT telescopic boom lift, year of manufacture: 2021, operating hours: 1,250h, 4x4 all-wheel drive, working height: 24.80m, horizontal outreach: 17.90m, capacity: 3 persons (454kg), engine: Deutz [55.4kW/75HP], weight: 14,250kg, dimensions (LxWxH): 10.25m x 2.50m x 2.89m, fully operational! Leasing or financing offers available on request. Mr. Ebert (Tel.) will be happy to assist you. For further details, please visit our homepage. Subject to errors and prior sale! Particulate filter, rental possible. = Further information = Nwsdpfx Ajyfqqionfsf Boom type: Articulated boom Please contact Tobias Ebert for more information.

Condition: excellent (used), mileage: 4,790 km, power: 103 kW (140.04 HP), first registration: 06/2023, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2023, General Information Number of doors: 5 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 2,300 cc Functional Superstructure brand: Carrier Xarios 300 Nwsdoxdw Taspfx Anfjf Cooling engine: Diesel Condition Technical condition: very good Visual condition: very good Damages: none Warranty Warranty: None

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,150 kg, load capacity per storage section: 3,050 kg, total length: 22,800 mm, total height: 3,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 22,800 mm, 4 double-bay pallet racks (M35112711-3) Each 5.7 m long, 3.5 m high, 1.1 m deep, Each with 2 bays, 2.7 m wide, Each with 3 beam levels, shelf load capacity 3000 kg. - 12 frames (RM3511 - RAL5019) - 24 base plates, shim material, fastening material - 48 floor anchors (ZZBA1210) - 48 single beams (T2711 - RAL2008) - 4 load capacity signs (BSMcP) Njdpfsyz Iccjx Anfowf Frames bolted, not pre-assembled Freight / Delivery: - Max. 20 working days after receipt of payment - Delivered free to site/installation location - Unloading from the truck to be carried out by the buyer using their own lifting equipment - Deliveries available throughout the Federal Republic of Germany (except islands); deliveries to EU countries upon individual agreement.

Year of construction: 2007, condition: excellent (used), Description to follow! Nwedpfoyr Siyex Anfof

Condition: excellent (used), load capacity: 4,000 kg, Equipment: foot remote control, Heinrichsglück 4 ton load capacity, TOP condition Nwedoyuph Ejpfx Anfof 4000 kg capacity welding positioner, complete set Horizontal load capacity: 4000 kg, tilted: 4000 kg Infinitely variable tilt and speed adjustment Very robust construction Speed continuously adjustable from 0.05 to 1.5 rpm, digital display Table diameter: 1500 mm Height horizontal: 1230 mm, tilted to center: 1000 mm Length 2.0 m x width 1.6 m Hand remote control and foot pedal

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Nodpfxjywpahs Anfswf Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 440 mm, rapid traverse X-axis: 400 m/min, rotational speed (min.): 2,500 rpm, controller manufacturer: HEIDENHAIN TNC 123, The machine is in very good condition. Immediately ready for use. Nsdpfx Asyxpraonfjwf

Condition: new, functionality: fully functional, machine/vehicle number: HR14346, Year of construction: 2026, load capacity: 4,500 kg, lifting height: 18,000 mm, fuel type: diesel, mast type: triplex, construction height: 3,040 mm, power: 85 kW (115.57 HP), fork length: 1,200 mm, empty load weight: 14,100 kg, total length: 7,260 mm, drive type: Diesel, construction width: 2,420 mm, Rotatable telehandler Chassis number: HR14346 Nwedpfx Aoyn Tcmenfsf Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Gearbox: Hydrostatic Condition: New device Technical condition: New Front tires type: Solid rubber Front tires size: CAMSO A8 158 4LR1 4057020 14PR Front tires condition: New Rear tires type: Solid rubber Rear tires size: CAMSO A8 158 4LR1 4057020 14PR Rear tires condition: New Description: 12 month factory warranty / Max. 2000 operating hours STVZO, full cabin, CE certificate, interior mirror, exterior mirror, joystick, seat, battery 2x12V wheel chocks TÜV preparation

Condition: excellent (used), Electric motor from Kaltenbach Maschinenfabrik for sale Price applies to 1 unit Nsdsyv Uvxspfx Anfjwf Condition: used, fully functional Motor tested with measuring instrument Normal signs of use and storage visible Technical data Manufacturer: Kaltenbach Maschinenfabrik Type: DKV 112M 238 4 Three-phase motor Power: 1.7 / 2.6 kW Voltage: 400 V, 50 Hz Protection class: IP54 Insulation class: F Speed: 700 / 1415 rpm Dahlander multi-speed motor Shaft diameter approx. 28 mm

Condition: refurbished (used), functionality: fully functional, We offer 4 units of Schlick turbines – 320 mm, including 7.5 kW motors. Turbines from Schlick ROTO-JET RB500 5.2/4/7.5. Turbine type – 5.2. Abrasive quantity – 140 kg/min. Abrasive exit velocity – 70 m/sec. Turbines after complete overhaul. Shot blasting machine, blasting, sandblasting unit. Price per unit – 3000 EUR. Nsdpfsvphf Usx Anfswf

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, pallet spaces: 108 euro pallets, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Nwedpfxov Ukz Ae Anfjf Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: NR: 220.10.029.19, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, High-quality Format4 Tempora 60.06 EL edgebander for sale – ready to work! Take your production to the next level with this lightly used Format4 Tempora 60.06 EL edgebander in excellent condition. Built for industrial performance, this machine delivers outstanding precision and a flawless finish on every panel. Nedpey Dg N Tjfx Anfowf - High-precision automatic edge banding - Pre-milling unit for perfect edge preparation - Reliable, consistent gluing system - Complete processing: trimming, milling, polishing - Easy operation and dependable performance Included extras: - Red air tank (as shown in the photos) - Additional heated glue pot – ideal for quick switching between different glue colors Carefully maintained, lightly used, and fully operational – ready to be put straight into production. The machine is available due to factory restructuring. Contact us for more details or to arrange a viewing.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, total length: 71,000 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, load capacity: 6,000 kg, frame height: 4,000 mm, load per truss pair (max.): 3,000 kg, Pallet Racking System 4 m high, each bay with 2 beam levels (clear width 2700 mm) Scope of supply: 32 frames, 4 m high 128 floor anchors 18 corner impact protectors 100 beams, 2.7 m long, 0.11 m high 150 mesh decks 89/110, load capacity 1000 kg 7 load capacity signs Delivery: free to site Frames bolted, not pre-assembled Njdjyyny Eepfx Anfewf Freight / Delivery: - Maximum 20 working days after receipt of payment - Free delivery to site / assembly location - Unloading from the truck is carried out by the customer using their own lifting equipment - Delivery to anywhere in Germany except islands! Deliveries to EU countries are subject to individual agreement.