Second-hand machinery for sale (200,000)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91128554, Year of construction: 2018, operating hours: 1,440 h, load capacity: 1,400 kg, lifting height: 4,550 mm, mast type: triplex, construction height: 2,200 mm, fork length: 1,150 mm, The forklift is in very good technical and visual condition. Iiedpfxozdf N Do Ag Usc The tires have been replaced, and a battery service was performed in June 2026. TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 4,550 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex Transmission: AC Battery type: 48V 4EPZS 620 Battery capacity C5: 620 Ah Number of cells: 24 Acid volume: 153 l Front wheels: Pneumatic tires, size 1x BA Three new wheels installed in May 2026 Control type: Standard joystick Operating hours: 1,440 h Motor power: 6.0 kW Battery service: June 8, 2026 Battery load test result: 72% (Result see appendix of the advertisement) Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,270 x 2,200 mm Weight without battery: 2,105 kg Battery weight: 935 kg Total weight with battery: 3,040 kg EQUIPMENT Battery charger (Model: SLT150, Year of Manufacture: 2018) Operator protection roof

Condition: used, Little used MAN Rollo model E3262 L232 CHP Plant fuelled by natural gas, made in 2022 with only 2000 hours of use! Engine manufacturer is MAN Rollo which is V12 configured with gross engine power output of 515 kW, 1500 RPM. The alternator is rated 415V, 3 phase and 50Hz. Iodpszcwiaefx Ag Ueic Output capacity is 435 kWel, 553 kWth.

Condition: used, Used Stainless Steel Millchem Dissolver type FMG25HD. Driven by a 22/15kW, 380V, 1500/750 rpm motor. Stainless Steel Turbine has a diameter of approximately 300mm. Supplied with (1) stainless steel tank with a capacity of approximately 1300 litres measuring 1180mm diameter x 1240mm. Iiodpfx Agozd Urgo Uoc

Condition: excellent (used), Year of construction: 2010, Capacity Swing over bed 750mm / 29.5" Swing over carriage 480mm / 18.9" Max. Turning diameter 750mm / 29.5" Max. Turning length 3935mm / 155" Distance between centres 4000mm / 157.5" Max. load between centres 3000kg Max. load by chucking 750kg Spindle Spindle speeds 3-1000rpm spindle speed range manual 2 steps Spindle nose type A2-11 Spindle bore 6.9mm / 6.9" Spindle taper MT6 Carriage Max travel X axis 425mm / 16.7" Max travel Z axis 3935mm / 155" Rapid traverse X axis 3m/min / 120ipm Rapid traverse Z axis 6m/min / 236ipm Ball screw (diameter x pitch) X axis 32 x 5 mm Z axis 50 x 10mm Cross side width 260mm / 10.2" Turret tool post Curvic type H-4 (Manual) Number of tool positions 4 Tool site 32 x 32mm (1.25 x 1.25") Tailstock Taper in tailstock spindle MT6 Tailstock quill stroke 200mm / 7.9" Tailstock quill diameter 112mm / 4.4" Iijdpfx Ajzfac Tog Uoc Motor Main spindle motor AC18.5/15kw (25/20HP) X axis servo motor AC1.0 kW (1.3HP) Z axis servo motor AC2.9KW (3.8HP) Lubricant pump motor for headstock 0.2kW coolant pump motor 0.18kW Lubricant pump motor for apron 0.025kW

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Capacity: 4,000 L Type of stainless: Stainless Steel Internal Pressure: 6 bar Internal Temperature: 130°C Jacket Pressure: 9 bar Diameter: 1,800 mm Straight Side: 2,450 mm Type Of Heads: Welded Dished Top and Bottom Iisdpfszdfb Hjx Ag Uoc Legs/Lugs: 4 Lugs

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss Iijdjzd Uv Espfx Ag Ujc 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: used, Year of construction: 2021, UK's Best Selling Automatic Crosscut Saw Built to meet the precise standards of fine joinery while embodying the robust quality of a sawmill, the globally acclaimed TR500 saw unit boasts a distinguished history of over 400 installations in the UK and over 50 years of industry use. A key component within the TR platform, the TR500 stands out with its ever-present 7.5kW saw motor - a consistent feature across the entire Stromab range. Its variable speed cutting cycle allows the precise cutting of softwoods or hardwoods, accommodating dimensions of up to 135mm in height or 360mm in width, all managed by a single top clamping unit. Infeed: The industry standard rack and pinion system featured through the Stromab range allows timber lengths of up to 14m and up to 90kg to be push fed without additional rollers. Featuring a table incline of 8 degrees, automatic lifting pusher system and a positioning accuracy of 0.4mm, the Stromab Matrix powers through your repetitive and bulk cutting requirements. Controller: Harnessing the power of an ELCO Top 12 colour touch screen, cutting lists are simple to programme using the innovative optimisation methods: BASE with board sequence, max length, or sequence. OPTI with base features and volume, minimum waste or priority. Alternatively, use our 'Design2Saw' software to pre-optimise files for the highest yield savings, loaded quickly via USB to reduce operator programming time. Specification Saw Unit: 7.5kw saw motor 500mm diameter saw blade 135mm x 120mm cutting height 360mm x 55mm cutting width Infeed & Outfeed: 90m/min positioning speed 0.4mm positioning accuracy 8 degree incline on table Servo driven rack & pinion 1m outfeed table as standard Automatic lifting of pusher arm Controller Elco TOP12 12" industrial touch screen PC Isdpfxszd Uqco Ag Usic 3 optimisation criteria - longest length, sequence & board sequence Fitted with the following options - 6000 mm in feed capacity Pneumatic lifting of pusher 10 hp saw motor Ø500 mm saw blade Opti version with full optimisation and board length reading Defect reading camera ( chalk mark reading )

Condition: excellent (used), Year of construction: 2017, Technical Specifications: Total pressing force 1500 kN Setting range 10 – 100 % Total pressing surface 3100 x 1350 mm Specific pressure at full charge 3,6 daN/cm² (kp/cm²) 6 cylinders 90 mm diameter 400 mm stroke Operating hydraulic pressure 395 bar Daylight height 400 mm Daylights 2 Daylight opening 150 mm 400V 50Kz 3 phase CE Iiedjzd T Uyspfx Ag Uoc 3 pieces heating devices each with 18 kW for heating up the fluid medium water to a working temperature of 130°C.

Condition: new, Unused Langfields approximately 7,766 litre total capacity Nickel 200 (BS3072N11) vertical mixing vessel. Unit measures approximately 1950mm straight side x 1950mm diameter. Unit has welded dished top and bottom heads. Internal rated 18.35 Bar design pressure at 200 deg.c. Unit has a top entry (2) tier (3) pitched blade Nickel 200 agitator driven by 3 kW variable speed drive at 1420rpm with double mechanical seal and thermistors. Unit is mounted on (4) carbon steel legs. Iisdpfozbt U Nsx Ag Usc

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Iijdpfx Agezb Ipzo Uec Coolant pump and tank

Condition: like new (used), functionality: fully functional, Are you looking for a good unused like new Chip/swarf conveyor? We have 3 units units of different sizes available for sale. Please contact us for more information and sizes required. Each unit is a bargain at only €1,200 each Iedpfsy Ifm Esx Ag Ueic

Condition: used, Year of construction: 2025, functionality: unexamined, Homag Centateq P110 PROFI BMG110/3115/F/K CNC machining centre (2025) with  Almig Combi XP15 receiver mounted air compressor (2025) Iisdpfx Aozc Rzpeg Uec Air Plants Dust Extraction Ltd dust extraction system (2025)

Year of construction: 2018, condition: used, functionality: unexamined, Sasso K500 CNC bridge saw (2018) 3 axis Iodpfx Ajzc Rgrjg Ujic Also available from the same location - Bellani Modulo edge polisher (2010)

Year of construction: 2010, condition: used, functionality: unexamined, Bellani Modulo edge polisher (2010) Iijdpfx Aezc Rf Iog Uoc

Condition: good (used), Year of construction: 2015, 2015 Haas VF 3SS CNC Vertical Machining Centre Table Size 1,219mm x 457mm (5 'T' Slots 16mm Wide x 80mm Pitch). Table Load 794kg. Axis Travel 'X'=1,016mm, 'Y'=508mm, 'Z'=635mm. Distance From Spindle Nose To Table 742-107mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 330mm, Maximum Tool Weight 5.4kg. S/No. 1119704 (2015). Iiodpfxszc Ih To Ag Uoc With Coolant Filtration System (208L Tank), Auger Screw Chip Conveyor, Renishaw OTS Tool Setter, Renishaw Spindle Probe, Signal Tower, Handwheel & Manuals. Note: Tooling & Work Holding Not Included.

Condition: excellent (used), Year of construction: 2018, 2018 Haas ST-25 CNC Slant Bed Lathe Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018). Iedpozc Id Uofx Ag Ujic With Coolant System (Tank Capacity 208L), Tool Setting Arm, Tailstock, Jorgensen Chip Conveyor, Footswitch & Signal Tower.

Condition: excellent (used), Year of construction: 2020, 2020 Haas UMC-750 CNC 5 Axis Vertical Machining Centre Table Dimension Ø500mm (7 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=762mm, 'Y'=508mm, 'Z'=508mm, 'B'=-35° To +120°, 'C'=360°. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=22.9m/min, 'Y'=22.9m/min, 'Z'=22.9m/min, 'B'=50°/sec, 'C'=50°/sec. Maximum Cutting Feed 16,5m/min. Maximum Spindle Speed 8,100rpm (22.4kW Motor). Spindle Taper BT40. 40 + 1 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 305mm, Maximum Tool Weight 5.4kg. S/No. 1172799 (2020). With Coolant Filtration System (208L Tank), Hennig Chip Conveyor, Renishaw Tool Setter, Renishaw Spindle Probe, Signal Tower, Handwheel & Manuals. Note: Tooling & Work Holding Not Included. Isdpfxezc Idho Ag Uoic

Year of construction: 2025, condition: used, functionality: unexamined, Complete Automatic Roll Forming Line (fully compatible with all Unistrut products) Year of manufacture: 2025 Model: CIRF-2019-2486 Unistrut 41 x 41 and 41 x 21 profile Approximately 15 meters per minute UK / Irish wiring standard (UK wiring schematics, safety pull cord system around main beds) with 2-ton de-coiler 3-stage, 3-ram punching unit (Hole Size: Approx 12mm × 25mm / Hole Spacing: Approx 50mm centers) Fully automatic upstroke shear Auto Hydraulic Logo printer/stamper Discharge table Iedpfx Aszc Hkgeg Uoic Overall Length: Approximately 30 meters

Condition: excellent (used), Year of construction: 2018, Specification Length: 4605mm Workpiece Thickness: 40mm Edge Material Roll: 0.4 – 3mm Edge Material Strip: 0.4-3mm Feed Speed 8m/min Joint Trimming Unit 40mm Quick Change Application Unit Isdpfx Aozdklceg Ujic Magazine for Coiled Material Pneumatic 2 point adjustment Pressure Zone End Trim Unit with Pneumatic Adjustment Pneumatic Adjustment Fine Trim Contour Trimming Unit Pneumatic Adjustment Profile Scraping Unit Glue Joint Scraper Buffers LED Indoor Lighting EasyTouch Control System Manual Central Lubrication Manual Top Pressure Adjustment Roller Top Pressure

Condition: excellent (used), Year of construction: 2018, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine Ijdpfxozdki Uj Ag Usic Energy Saving Mode

Condition: used, turning diameter over bed slide: 1,000 mm, turning length: 6,500 mm, Swift Heavy Duty Long Bed Lathe Swing Over Bed: 1000mm Distance Between Centres: 6500mm Spindle Speeds: 7.5 – 450 RPM Machine With: 800mm 4 Jaw Chuck Fixed Roller Steady 400mm Dia Travelling Steady Rapid Traverse To Saddle Iiodpfezbx A Ssx Ag Uoc Digital Readout

Condition: used, functionality: fully functional, travel distance X-axis: 2,155 mm, travel distance Y-axis: 1,940 mm, travel distance Z-axis: 2,134 mm, spindle diameter: 130 mm, spindle speed (max.): 180 rpm, total width: 1,400 mm, table length: 1,600 mm, Union BFT 130 CNC Horizontal Borer Model: BFT 130 Control: Heidenhain TNC 360 Table Area: 1600 x 1400mm Spindle Diameter: 130mm Spindle Taper: ISO 50 Spindle Speeds: 4.5 – 900 RPM Facing Head Diameter: 800mm Facing Head Speed: 4.5 – 180 RPM Ijdpfx Aozbx Axeg Ueic Cross Travel: 2155mm Long Travel: 2131mm Vertical: 1940mm Spindle Travel: 760mm Machine With: 360 Degree Rotation of table via Control

Condition: used, Używana mobilna laboratoryjna suszarnia rozpyłowa produkcji Niro (Dania) model Mobile Minor. Części kontaktowe wykonana ze stali kwasoodpornej. Komora o wymiarach: średnica 800 mm, długość prostej linii boku 600 mm, wysokość dna stożkowego 650 mm. Komora posiada izolację i jest obłożona pomalowaną blachą ze stali węglowej. Urządzenie jest wyposażone w pneumatycznie napędzany dysk rozpyłowy, cyklon oraz orurowanie. Posiada elektryczną nagrzewnicę o mocy 9 kW. Zdolność odparowania w zakresie od 1 do 7 kg/h i zależy od produktu oraz temperatury wejsciowej. Zamontowana na przejezdnej ramie ze stali węglowej. Brak dokumentacji technicznej. Isdpfozcwnvox Ag Usic

Condition: used, Used Alfa Laval model LAPX404-SGP-31G/CG stainless steel clarifier centrifuge. Maximum density of feed 1,100kgs/m3, maximum density of sediment 1,499kgs/m3 and maximum density of operating liquid 1,000kgs/m3. Process temperature rated 0 to 100 deg.c. Maximum bowl speed rated 9,600rpm. Unit is driven by 3.7kW motor. Unit includes control panel. All mounted on common stainless steel mobile base. Iisdpfxezcwpts Ag Ujc

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Ijdpfxszcwitj Ag Ueic Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available.