Used 1/2-2 Inch Threading Machine for sale (126,661)

Condition: used, 2 Threading drills Roughing and finishing cutter R 2 1/4 inches Weight 4 kg Nwjdpfxsdk Rgro Abujn

Condition: good (used), Whitworth thread tap Manufacturer: Reishauer Whitworth 1 1/2 inch, 601 D Rapid Nwededx Ug Eepfx Abuen

Condition: used, REISHAUER US is a Thread grinding machine of high precision, engineered for superior accuracy and reliability. Capacities: grinding length 450 mm; clamping 1055 mm; max Ø 250 mm; thread Ø 2–250 mm; spindle bore 45 mm; weight on centres 200 kg; pitch ≤100 mm; angles ±40°; module ≤10; wheels Ø280–350 mm, width 4–40 mm. Specs: wheel speeds 6 steps 1700–2540 rpm; work spindle 27 steps up to 160 rpm; 3×380 V 50 Hz; grinding spindle 4 kW; total 15 kVA; machine ≈4700 kg; footprint 3300×1930×1800 mm. Accessories: coolant, wheel set, flanges, gear set, centers, oil-mist extractor. Achieves tight tolerances; suitable for automotive, aerospace, watchmaking, machine tools, medical. Nwjdpez Dbh Esfx Abusn

Condition: excellent (used), Year of construction: 2026, operating hours: 100 h, functionality: fully functional, machine/vehicle number: MT1212_2026_31, working range: 1,250 mm, overall weight: 1,400 kg, compressed air connection: 6 bar, total height: 1,610 mm, total length: 2,550 mm, type of input current: AC, warranty duration: 36 months, workpiece weight (max.): 80 kg, table width: 1,250 mm, air pressure: 6 bar, input current: 16 A, table length: 1,250 mm, space requirement height: 1,610 mm, space requirement length: 2,550 mm, space requirement width: 1,770 mm, Equipment: documentation/manual, rotational speed infinitely variable, Multitapper 1212 Automatic Threading Machine CoastOne - Made in Finland Demonstration Machine Nwjdpjz A U T Ejfx Abujn Machining area: 1250 x 1250 mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2 thread cutting and forming stations; 1 countersinking and drilling station Micro-lubrication for each spindle/tool station Control: TC15 touchscreen Numeric input, import of punch and NC files Warranty: 36 months after installation Immediately available; subject to prior sale Viewing under power is possible at any time by appointment

Condition: new, thread dia. M6 - M36 mm turning speeds 156 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Nsdpfjg N Nl Ijx Abuewn Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. 1 each GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 Substructure 900 x 600 x 875 mm

Year of construction: 2007, condition: good (used), useful lenght 5000mm blades 500 mm Nedpe Afn Risfx Abuown

Condition: good (used), Year of construction: 2009, functionality: fully functional, Thread rolling machine. Control system: Fanuc. Nwsdpsz Rzdzsfx Abuon

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm Nodpfeg N Nl Dox Abuswn - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: ready for operation (used), * Brand: Allis Chalmers * Surface: 4000 x 1200 mm - 2 decks Nwjdeywl S Hjpfx Abujn

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. Nwsdpjv Sa I Tofx Abuen While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Cone CM4 DECKEL Spindle speed: from 40 to 2000 RPM Horizontally tiltable head Spindle motor: 2 speeds Motor: 1,5 kW Feeds: X - Z auto / Y manual Supplied without table only with one 4 concentric jaws Ø 140 mm Nwodpoz Nx Axjfx Abujn Voltage: 380 V Width: 1200 mm Depth: 1200 mm Total height: 1600 mm Weight: approx 900 KG

Condition: ready for operation (used), * Brand: dbr Fördertechnik * Surface: 5000 x 2000 mm – 1 deck. * Driving: E-motor 15 kW * Incl.: springs and springsupport. * Stock: 2 pieces. Nsdpfsy R Rvwjx Abuswn

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Power: 3,200 W Nwjdpoyyygkofx Abusn

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI Nedpfx Asuxfu Nsbuswn - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, Technical Data Max. Workpiece Diameter: 3,800 mm Max. Rotational Speed: 100 min⁻¹ Nwsdpfx Aozu S U Hjbuon Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 × 47 slots (94 slots total) Travel Paths X1-Axis (Right Support): 3,200 mm X2-Axis (Left Support): 2,800 mm Z1-Axis (Right Support): 750 mm Z2-Axis (Left Support): 750 mm Workpiece Spindle Speed Range up to 100 min⁻¹ Nominal Power: 67.4 kW Maximum Power: 202.2 kW Max. Torque: 71.6 kNm Max. Table Load: 35,000 kg Water-Cooled Motor Spindle Multifunction Head B-Axis with Stepless Positioning Swivel Range: 180° Driven Tools up to 6,000 min⁻¹ Hydraulic Clamping Direct Measurement System High-Pressure Cooling up to 70 bar Tool Magazines 2 Chain Magazines with 47 Slots Each Tool Diameter up to 120 mm Up to 150 mm with Appropriate Magazine Loading Max. Tool Length: 400 mm Max. Tool Weight: 20 kg Chip and Coolant System 2 Knoll Chip Conveyors Knoll Band Filter System KF400-2300 Electrical Data Operating Voltage: 3 × 400 V AC Protection Class: IP55 Connection Power: 280 kVA Control: Siemens SINUMERIK 840D sl Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: ready for operation (used), * Brand: Metso CFBK Nodpfx Aez R Aclebuswn * Surface: 6000 x 1800 mm - 2 decks * On stock: 1 piece * 1x screen opening: upper deck 17 mm, lower deck 12 mm. * Incl.: E-motor and springs.

Condition: used, Year of construction: 1997, machine/vehicle number: 707, Ingramatic thread rolling machine RP21 RV, year 97, used Nedpfswiu Afox Abuewn

Condition: used, functionality: fully functional, This machine is capable of producing bent bolts with threads on one end (eye bolt) or both ends (u bolt) Nsdezt S U Repfx Abujwn

Condition: used, Offered: Mechanical tapping machine with change-gear feed. Equipped with T-slot worktable, tool holder, mechanical operating levers, foot switch and emergency stop button. Inspection possible by appointment. Nwodpfs Afzaksx Abuen

Condition: new, tube diameter 1/2 - 2.0 Zoll wall strength 2.75 - 4.5 mm ST pressure 10.0 t weight of the machine ca. 46.0 kg With a hinged bending frame for efficient work - Various bending dies included - Universally applicable for gas, boiler, and water pipes - Fast work thanks to rapid feed - With a tripod stand for safe work - Also ideal for copper and coated pipes Nwsdpfx Abjxaac Neusn - Bends up to 90° can be created Features: - Bending dies: ½" - ¾" - 1" - 1 ¼" - 1 ½" - 2"

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutting -Manufacturer: Alrowa, thread cutting head with Strehler jaws -Type: No23 -inch thread: 1/4 - 1 1/2" -Dimensions: 730/150/H125 mm Nodpfx Aboz Aq Hksuswn -Weight: 8.0 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutting -Manufacturer: Alrowa, thread cutting head with Strehler jaws -Type: No6 Nsdpfx Absz Arhvouown -inch thread: 1 1/2 - 3" -Accessories: incl. 3 sets of Strehler jaws, see photos -Dimensions: 950/200/H150 mm -Weight: 15.7 kg

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 0049, overall weight: 12,000 kg, Manufacturer: Profiroll Nsdoz Tznrepfx Abuewn Type: UWRA 160S Control system: Siemens Machine type: Ring rolling machine Pressing force: 63 t Max. outer diameter of round parts: 160 mm Dimensions: 80 mm Roller bore: 30/100

Condition: good (used), Pressing tool, sheet metal former, forming tool, straightening tool, special punches/mandrel elements, centering or positioning tool -Manufacturer: Mubea, Punching tool: Pipe notching tool, 18 pieces -Matrices: 8 pieces, sizes 1" to 1 1/4" Nedpfx Abo Aa Tlhouewn -Stamps: 10 pieces, sizes 1" to 2" -Quantity/Dimensions: see photos/parts list -Submission/Price: complete -Transport dimensions: 360/170/H45 mm 170/150/H30 mm -Weight: 10.7 kg / 3 kg

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Tapping head Adjustable slip clutch Thread M3 - M10 Mechanical condition very good optically there are traces of storage Nwjdetqlq Eepfx Abujn