Used Arburg 320K 700-250 for sale (15,451)

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 45 mm, For sale: injection moulding machine by KraussMaffei, model KM 125-700C2. The machine is fully functional and was in production until recently. Technical specifications: Year of manufacture: 2000 Operating hours: 69,000 h Clamping force: 125 t Ppedpfx Ajx Ituqom Tew Screw diameter: 45 mm Needle shut-off: Pneumatic Core pull: 2*Hydraulic Internal pressure sensor

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes replaced; major maintenance package carried out approx. one year ago (machine has not been in operation since)! TECHNICAL DETAILS Distance between centers: 700 mm Spindle speed range: 1 - 4,000 rpm Tool spindle speed: 10,000 rpm Bar capacity: 80 mm Mounting: MT5, revolving tailstock Without center Turret: 12 stations, bolt-on turret Overhang for driven tools: ±100 mm Psdoy A Icropfx Am Tspw Assemblies: Integrated MK4 bearing for live center Chip and coolant system: Scraper-type chip conveyor with magnetic separator, discharge height approx. 1,000 mm Coolant system: high pressure 5 bar, pump 800 W, delivery rate 20 l/min Coolant shower at chuck, including high-performance pump Compressed air blow-off system for tool holder sleeves Compressed air blow-off system for tailstock live center Line filter for coolant system MACHINE DETAILS Control: M730UM, CELOS - ERGOline Touch Total power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) EQUIPMENT Interface for oil mist separator (diameter: 150 mm) Signal beacon: red, yellow, green, blue EtherNet/IP interface for automation Robot interface for portal robot DMG Mori Seiki Transformer: 45 kVA, three-phase autotransformer X-axis direction ISO Note: The machine is supplied without a chuck, tool pre-setter, or workholding devices.

Condition: excellent (used), Year of construction: 2011, Control system MXS 850 IV Data: Max Swing over bed 755 mm Max swing over support 740 mm Max Turning diam. 366 mm Turning length 785 mm Movements X 260 mm Podsyilzhjpfx Am Tjpw Y 100 +-50 mm Z 795 mm Rapid transport X/Y/Z 30/20/50 m/min Spindle power 26/22 kW Spindle speed 4,000 rpm Bar Capacity 80 mm Chuck diameter 250 mm Spindle nose JIS A2-8 Spindle indexing 0.001° Sub Spindle power 11/7,5 kW Sub Spindle speed 6,000 rpm Sub Bar cap. 80 mm Sub spindle Chuck diameter 150 mm Sub Spindle nose JIS A2-5 Sub Spindle indexing 0.001° Number of tools in turret/driven 12/12 pcs. Power driven tools 5.5 kW Spindle speed driven tools 6,000 rpm Machine weight 6,200 kg Machine dimensions LxWxH 4.34 x 2.00 x 2.120 m Equipment: Chip conveyor, 3-jaw chuck Kitagawa BB-210 in main Spindle and a Kitagawa B 206 in Sub Spindle, Part catcher, Various tool holders, Parts catcher, Interface for Bar-Feed, Synchronised threading, The machine has 17800 work hours.

Condition: used, Year of construction: 2011, turning length: 705 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 30,000 m/min, Mori Seiki NL2500SY-700 Brand: Mori Seiki Model: NL2500SY-700 Category: CNC Lathe Year: 2011 CNC Control: Mori Seiki MSX-850 IV Machine weight: 6.2 tons Capacity Ppedpfjyxmh Sjx Am Tew Max. swing over bed: Ø 579.8 mm Max. swing over carriage: Ø 755 mm Max. turning diameter: Ø 356 mm Max. turning length: 705 mm Bar capacity: Ø 80 mm Axis travels X-axis: 260 mm Y-axis: ± 50 mm (100 mm total) Z-axis: 795 mm C-axis: ± 360° Main spindle Spindle diameter: 254 mm Speed: 4,000 rpm Spindle nose: ASA-8 C-axis indexing: 0.001° Power: 18.5 kW (cont./30 min) Sub spindle Speed: 5,000 rpm Spindle nose: ASA-6 C-axis indexing: 0.001° Power: 15 kW (cont./30 min) Turret 12 driven tool stations Tool speed: 6,000 rpm Tool power: 5.5 kW Turning tools: 25x25 mm Boring: Ø 50 mm Feed rates Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 30,000 mm/min Rapid traverse Z-axis: 10,000 mm/min C-axis: 400 rpm Accessories Static toolholders + 4 driven (2 radial, 2 axial) Chip conveyor + tank Top Automazioni – Magic bar feeder Electrical transformer Part unloading arm 250-liter coolant tank Manuals + electrical diagrams CE Declaration

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, MAIN SPINDLE: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4,000 rpm Max. spindle bore: 80 mm Max. machinable diameter: 366 mm C-axis 0.001 degree TURRET: Ppedpfxox Rvgzs Am Tew Number of positions: 12 pcs. Number of driven tools: 12 pcs. Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6,000 rpm Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3,800 x 2,143 mm Machine height: 2,232 mm Machine weight: 6,100 kg ACCESSORIES: Control: MORI MSX-850 II Tool measuring device Parts removal Chip conveyor Coolant tank Tool holders and driven tools

Condition: excellent (used), Year of construction: 2013, operating hours: 4,300 h, functionality: fully functional, machine/vehicle number: NL 254131163, CNC controller M730BM with MAPS IV Capacity X-axis travel mm: 250 Y-axis travel mm: +/- 50 Z-axis travel: mm 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Swing over bad mm: ø 920 Swing over cross-side mm: 742 Bar work capacity mm: 80 Upper turret Number of tool slots St: 12 Speed driven tools RPM: 10.000 Ppedpfx Amet Akirj Tjw Drive power driven tools kW: 5,5 / 3,7 (3 mm / cont) Main spindle Speed spindle rpm: 4,000 Drive power spindle kW: 18.5 / 15 (50% ed / cont) Chuck type: BB210 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstocktravel mm: 734 Holder: MT5 equipment Chip conveyor Tool measuring arm Foot switch for chuck or collet system Interface for bar feeder

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" Podpfx Amszp Ifwo Topw The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: good (used), Note: The images are for illustrative purposes only. - The workbench frames are commissioned unassembled; - Production time is typically approximately 3-5 business days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Included in delivery: 4x square tubes, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole pitch: 75 x 50 mm Drill hole diameter: 13 mm Podpfowgicbsx Am Tspw 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 1x chipboard, used Thickness Chipboard: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: coated if necessary (two-part if necessary) 6x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 16x washers: M12 Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 Ppsdpfx Amegrzh Eo Tsw 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, Injection molding machine ARBURG, type Allrounder 320 C 600-100 Year of manufacture: 09/2002 Clamping force: 60 tons Ppedpfszqglrex Am Tew Screw diameter: 25 mm The machine will be dismantled on August 17, 2026, and transported to our warehouse or directly to your location.

Condition: ready for operation (used), Year of construction: 2007, clamping force: 1,000 kN, This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: Psdpfx Aex D Hgvem Topw • Five-point double toggle with servo-electric adjustment • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/bad parts (Pos 375/00)

Condition: like new (used), Year of construction: 2022, operating hours: 12,182 h, functionality: fully functional, machine/vehicle number: 259303, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, All-electric injection molding machine with Multilift, conveyor belt, and safety fence from current production Manufacturer: Arburg Type: 520 E 1500-400 Control: Selogica Year: 2022 Machine No.: 259303 Operating Hours: 12,182 h Injection Unit Injection unit/screw: 40 mm Injection volume: 201 ccm Injection weight: 184 g Heating power: 9.7 kW Heating zones: 5 Nozzle travel: 300 mm, 50 kN Injection pressure: 2000 bar Clamping Unit Clear column spacing: 520 x 520 mm Platen size: 695 x 695 mm Clamping force: 150 tons / 1500 kN Opening stroke: 450 mm Maximum platen distance: 700-1000 mm Minimum tool height: 250-550 mm Ejector stroke: 175 mm / Ejector force: 40 kN Weight: 7000 kg Extras • Thermoplastic processing • Cylinder liner, highly wear-resistant • Open nozzle 400 mm incl. heating band • Nozzle tip, flat • Servo-controlled nozzle travel • Electrical connection for needle-gate nozzle • Tool monitoring for ejector plate safety • Protective device, open at the top • Automatic central lubrication • Volume flow for hydraulic core pulls: 60 l/min • 2 x core pull control • 2 x blow-out • Electrical mold height adjustment • Cooling water with 6 free circuits • Machine-specific cooling circuits, programmable • Conveyor belt, electrically programmable • Selection unit, good/bad • Pneumatic maintenance unit • Equipment packages • Extended travel movements: • Increase in the number of travel stages and intermediate stop functions • Production control: • Production control with temperature setpoint control and programmable alarm cycles • Optimization/Operator Assistance: for adapting the machine to individual operational needs • Quality assurance: • Extends the standard quality monitoring and documentation: • Options for process analysis • Documentation with actual value protocol • Boosting (starting the hot runner nozzles with temperature increase) - free melting • Freely configurable page for start parameters (adjust cycles with other parameters instead of production parameters) • Socket combination: 1x CEE and 1 x Schuko • Socket distributor: (3x CEE and 3 x Schuko) • 12 x electrical heating circuits, each with 2 kW (230V) • Increased power for heating circuits 1-6 to 3.5 kW / 230V each • Connected Systems (CPU Ethernet prepared for 4th service - remote maintenance) • Robot interface Euromap 67 • Coloring interface • Multilift Select / Transversal design, 6 kg handling weight 3 CNC axes can be moved simultaneously / incl. pneumatic valve / vacuum equipment as well as C-axis (folding axis) pneumatic X, Y and Z-axis drives, servo-electric z-1400 mm / X-400 mm / y-800 mm / c-pneumatic folding axis 0-90° 13 Nm / Weight 1.2 kg with special equipment X-axis extended to 600 mm / Y-axis to 1000 mm / C-axis, end positions monitored Clearance height increased by 200 mm • Conveyor belt • Safety fence Ppsdezn Av Iepfx Am Tsw • 8 freely programmable inputs • 1 interface with 4 freely programmable inputs and outputs The machine is in top condition and can be inspected while powered on. From current production. The machine is available in our warehouse immediately. Free loading onto the buyer's truck or free delivery to the buyer's location against reimbursement of freight costs.

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 250 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 250 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR25 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 250 cm x 110 cm, disassembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 8690,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : On request, delivery can be carried out by our partner shipping company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Pedszpvvkspfx Am Topw Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Manufacturer: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards. Pedpfx Asxvy Rlsm Topw Key advantages of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. Pedpfx Ameyiz U Tj Topw The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes. The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications. Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.

Year of construction: 2007, condition: as good as new (ex-display), “UNUSED – Schenck SLG 2.500 x 5.700 mm“ for Sale Podpoglvw Ijfx Am Tepw Find our complete stock on our website. Manufacturer: Schenck Type: SLG Size: 2.500 x 5.700 mm Deck: 1 Fert. No.: VO35406.A01 Year of Manufacture: 2007

Condition: used, Year of construction: 2005, 1 hydraulic injection molding machine, ARBURG ALLROUNDER SELECTA 270S Self-dismantling capability Color: as shown in the pictures, matching the images and inspection Year of manufacture: 2005 Machine number: 198190 Dimensions L/W/H: 350x110x200cm Condition: used Ppodpjzqcl Iefx Am Tew

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, clamping force: 100 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details. • Selection unit: yes • Single platen: yes • Beam spacing: 470 x 470 mm • Operating hours: 22,626 h • Electricals: • Operating voltage: 400 V, 3~, 50 Hz • Control voltages: 230 V, 50 Hz; 24 V~ • Motor/heating rated current: 80 / 58 A • Total rated current: 138 A • Total connected load: 75 kW • Condition note: small servo motor problem Pjdpjzm S Auofx Am Topw Additional equipment • Geiger handling (optional)

Condition: excellent (used), Year of construction: 2020, operating hours: 12,436 h, functionality: fully functional, machine/vehicle number: 254633, clamping force: 500 kN, screw diameter: 30 mm, We offer this very well-maintained Arburg ALLROUNDER 320 C 500 - 170 machine, manufactured in 2020, including an integral picker. - Golden Edition model with SELOGICA direct control - Clamping plate set with central injection position and centering diameter of 125 mm - Plasticizing cylinder set 30 mm (without nozzle) - Open nozzle 30 mm with internal thread M 24 x 1.5 - Granulate container, stainless steel, 50 l The machine is in very good condition and is being sold from current production. Loading and transport are not included in the price and are the responsibility of the buyer. Collection is possible from September 2026. Podpfxjzmvi Es Am Topw Machine location: 47574 Goch If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 243708, screw diameter: 15 mm, total length: 2,500 mm, total width: 1,500 mm, total height: 2,500 mm, overall weight: 1,700 kg, power: 39 kW (53.03 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 64 A, controller manufacturer: SELOGICA, control voltage: 230 V, ARBURG ALLROUNDER 220 S 180-70 injection molding machine - Rated current for motor heater: 57 A Ppedpjzldp Rjfx Am Tow - Includes core puller, manufacturer: MARCZINKOWSKI Please note: the item must be picked up on September 3, 2026, at a date to be confirmed. FCA D-58507 Lüdenscheid - loaded onto a truck.

Condition: used, Year of construction: 2013, operating hours: 45,000 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Podpfjzp R I Iex Am Tjpw terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2023, operating hours: 15,000 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz Ppsdszp R Izepfx Am Tsw delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), LAIPPLE / KEB M63L / 4a-SO, serial number: L113063970025005, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Pedpfxoi D I D Ns Am Tepw

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request Pedpfoxl Hi Tex Am Tspw terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2010, (1) Injection molding machine, Handling: Wittmann | W832-0185 | 2010 Ppjdpfjy N R Tyex Am Tow Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling System 1x Conveyor Belt 1x Hopper Dryer, company TORO-systems 1x external Hot Runner Unit, company Mold Masters 1x Conveyor Unit, company Motan