Used Astron Buildings Gmbh for sale (70,148)

Condition: excellent (used), Strapping machine Mosca RO-M Manufacturer: Mosca Type: RO-M Semi-automatic carton strapping Strap width: 4 to 12 mm Hot wedge welding system Adjustable strap tension Control: ecomat 100 Foot pedal for strapping release Dodpfx Amotncc Uogsci Table surface: W 640 mm Working height: 830 mm Power supply: 400 V Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Fully automatic MOSCA strapping machine RO-TR 700-2 Dcedetzbhcopfx Amgji Manufacturer: Gerd Mosca GmbH Type: R0-TR700-2 PLC control Control panel for setting the operating modes, strapping distances, strap tension Automatic PP straps width 5, 6, 7, 8, 9 or 12 mm Operating voltage: 400 V 3AC Power consumption: 3 A Power: 2.1 kW Frequency: 50 Hz Castors: four swivel castors, two of which are lockable Overall dimensions: approx. 1350 x 1200 x 1650 mm (WxDxH) Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Djdpju Tha Iofx Amgjci Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Dcsdeu Thh Eepfx Amgji Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Dcedpfeyq Hgkex Amgsi Filling range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: new, R. & S. Keller control panel for Sinumerik 820 T, unused, 100% functional. Djdpfxji Ecl Ij Amgeci

Condition: new, R.& S. Keller control panel cover, Dialog 11, unused, 100% functional. Dcodpfx Amei Ecmaegji

Condition: new, R.& S. Keller control panel cover, Dialog 11 model, in original, unopened packaging, unused, 100% functional. Dedpfji Ecmdox Amgjci

Condition: new, R. & S. Keller operating panel for Sinumerik 820 T, unused, in open original packaging, 100% functional. Dcjdpfxji Ecl Se Amgei

Condition: new, Bee GTE-88/090/-08-V17-F pneumatic ball valve, 24V DC coil voltage, unused, 100% functional, scope of delivery as shown in the photos. Dcodpfxsi D T Iye Amgoi

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center Dsdpfx Amedz Spwsgeci - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 053 389 601, Offered for sale is an extrusion tool for PVC, used in the manufacture of PVC pipes. Dcjdjzhuqkopfx Amgei Pipe diameter range, min.: Ø63 mm Pipe diameter range, max.: Ø160 mm Output: approx. 750 kg/h Design: Mandrel carrier system designed for PVC melts, completely made of 1.2316 Flow contour polished Equipped with cylinder heaters and thermocouple M14x1.5, type “J” Includes 3 m connection cable, without plug connector for the extruder Technical data: 230V, 50Hz for max. 3600W per zone, 16A Number of heating zones: 6 Two copies of the operating manual, in German or English, are included in the scope of supply.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero QTX-340, The device was used for research purposes. SPE-Spero QTX-340, MIR microscope with 'Hyper Spectral Imaging' capability. Spectral coverage of the fingerprint region (1900 - 950 1/cm). High-Resolution IR Objective: 12.5X; NA: 0.7, 650μm FOV. Enhanced LowMag Lens Visible: 4.0X; NA: 0.13, 650μm FOV. 480*480 pixels, Broadband Microbolometer Camera, Visible camera. QT-Laser-Performance-Package including high precision automated stage (< 1μm repeatability). High-speed data acquisition, joystick, control computer, Win10. 'Discrete Frequency IR Imaging' in real time. Transmission and reflection mode. 4000 hours laser active time. Dcsdjy Dcd Hepfx Amgei

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero-LTX-340, The device was used for research purposes. SPE-Spero-LTX-340, MIR microscope with "Hyper Spectral Imaging" function; spectral coverage (1900 to 950 1/cm). Enhanced LowMag lens 4.0X; NA:0.3, 2.0mm FOV. Dedicated IR-transmission mode. Broadband 480*480 pixel microbolometer camera, including high-precision automated stage ( Dsdpfsyxc Twox Amgjci

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20-3443, input voltage: 400 V, total width: 2,286 mm, total length: 11,994 mm, total height: 2,582 mm, temperature: -80 °C, type of input current: three-phase, cooling capacity: 12 kW (16.32 HP), input current: 63 A, ambient temperature (min.): -20 °C, input frequency: 50 Hz, ambient temperature (max.): 42 °C, For sale is a mobile, redundant low-temperature storage unit in a container design, consisting of an antechamber with an operating temperature of -20 °C and a storage room with an adjustable temperature up to -80 °C. Technical data: Storage temperature (adjustable): up to -80 °C Dcjdpfx Ajzg Dtxjmgei Permissible ambient temperature: -20 °C to +42 °C Number of refrigeration circuits: 4 Sound pressure level (1 m free field): 73 dB(A) Refrigeration circuit – Stage 1 Refrigerant: R449A (GWP: 1,397) Number of compressors: 2 Compressor type: semi-hermetic reciprocating compressors, frequency-controlled Refrigeration circuit – Stage 2 Refrigerant: R508B (GWP: 13,396) Number of compressors: 2 Compressor type: semi-hermetic reciprocating compressors, frequency-controlled Condenser Number of condensers (Stage 1): 2 Heat output per condenser: 35.0 kW Fans per condenser: 2 Fan type: EC fans, speed-controlled Nominal air flow rate per condenser: 8,800 m³/h Electrical data Power consumption at operating point (total): 24.2 kW Current consumption at operating point (total): 43.9 A Recommended fuse rating: 2 × 63 A (CEE connector, redundant) Power supply: 400 V / 50 Hz / 3 phases + N Control system PLC: Siemens S7-1214C Operating panel: Siemens TP900 Comfort, 9 inches, 16.7 million colors Operating languages: German and English Inspection An inspection of the unit is possible at any time at our factory by prior appointment. Upon request, the unit can be put into operation during the inspection so that you can be convinced of its function and performance.

Condition: used, Year of construction: 2015, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm control: Mitsubishi M70 table-size: 2 × 700 × 400 mm mm table load capacity: 2 × 250 kg kg tool taper: SK40 / ISO40 Revolution per minute: 12.000 U/min. tool changer with: 24 Plätze (+1 Werkzeugwechselposition) total power requirement: 25 kW Dedpfx Aezgu Aqomgoci Weight approx.: 6,6 t

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: Dcodjzka Ruopfx Amgji be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 066 404 601, An extrusion tool for the production of PE or PP pipes is offered. Pipe diameter range min: Ø140 mm Pipe diameter range max: Ø250 mm Output approx.: 1000 kg/h Design: Spiral distributor system, Dedpozhnd Rofx Amgjci completely made of 42CrMo4 Flow contour polished Equipped with cylinder heaters and temperature sensors M14x1.5, type “J” Incl. 3 m connection cable, without plug connector for the extruder Technical data: 230V, 50Hz for max. 3600W per zone, 16A Number of heating zones: 7 2 copies of the operating manual in German or English are included in the scope of delivery. The offer includes the following items: - Base tool PO G 250 - Covering package for a max. 10% outer layer - Flex die insert for Ø250/180 - with this die insert, all dimensions from Ø250 to Ø180 can be produced in SDR17 + SDR11 - Tool mounting carriage, swiveling by 90° - Internal cooling for oil or water in the spiral distributor - Prepared for the installation of a pipe head air cooling system

Year of construction: 2018, condition: ready for operation (used), operating temperature: 950 °C, ambient temperature (max.): 70 °C, nominal flow rate: 40 m³/h, overpressure (max.): 0.2 bar, machine/vehicle number: 220173941, TECHNICAL DETAILS Maximum overpressure in the pipes: 0.2 bar Dcjdezddb Eepfx Amgoi Maximum operating temperature in the pipes: 950°C Maximum ambient temperature: 70°C Pipe volume: 40 l EQUIPMENT Dew point or cp control Soot filter in duplex version Fully automatic power control in the range of 50-100%

Condition: new, functionality: fully functional, power: 17.1 kW (23.25 HP), fuel type: diesel, color: orange, overall weight: 2,200 kg, operation weight: 2,200 kg, maximum load weight: 1,200 kg, tire condition: 100 %, shovel volume: 0.4 m³, digging bucket width: 140 mm, suspension: steel, Year of construction: 2026, Equipment: 4 in one shovel, all wheel drive, cabin, hydraulics, pallet forks, The TEC-POINT YX918 wheel loader presents itself as a compact, premium wheel loader for professional users who are looking for a maneuverable, robust, and immediately ready-to-use machine with exceptionally extensive equipment. Designed for daily use on farms, construction sites, in agriculture, in gardening and landscaping, in municipal operations, and on storage and commercial properties, the YX918 combines compact dimensions with high versatility, comfortable operation, and modern technology. Highlights ✅ Kubota V1505 diesel engine – stands for reliability, solid performance, and proven technology. ✅ Engine power: 17.1 kW ✅ Year of manufacture: 2026 ✅ Enclosed comfort cab with heating – provides significantly more comfort and protection from wind, rain, cold, dust, and dirt. ✅ Adjustable comfort seat ✅ Hydraulic joystick pilot control – ensures precise, sensitive, and comfortable operation. ✅ Electric control lever ✅ Quick-change system for fast attachment changes ✅ 4-in-1 bucket included ✅ Pallet fork included ✅ Additional hydraulic function for attachments ✅ Boom lowering protection device – further increases safety when working with the boom. ✅ Work lights ✅ Bucket volume: 0.4 m³ ✅ Transport weight: 2,200 kg ✅ Load capacity: 1,200 kg ✅ CE marking available ✅ New, unused, and immediately available ✅ Europe-wide delivery possible The YX918 wheel loader is ideally suited for: Agriculture, farm work, gardening and landscaping, construction sites, municipal operations, storage areas, equestrian centers, firewood businesses, municipal depots, commercial enterprises, material transport, pallet handling, and private users with professional requirements. Whether bulk goods, earth, gravel, sand, wood, feed, building materials, tools, or pallets – thanks to the extensive accessories package, the YX918 is immediately prepared for a wide range of tasks. ⚙️ Technical data Manufacturer / Brand: TEC-POINT GmbH Model: YX918 Machine type: Wheel loader / Compact loader Condition: New / unused Year of manufacture: 2026 Engine: Kubota V1505 diesel engine Engine power: 17.1 kW Operating weight: 2,200 kg Payload: 1,200 kg Bucket volume: 0.4 m³ Gradeability: 25 % Minimum turning radius: 2,000 mm Maximum dumping height: 2,300 mm Maximum dumping distance: 700 mm Tire type: 20.5-16 Dcsdpfx Asyky E Homgoi Tire pressure: 350 kPa Cab: enclosed Control: hydraulic joystick pilot control Operation: electric control lever Steering: hydraulic Braking system: hydraulic Condition & Availability ✅ New ✅ Unused ✅ 12 months warranty ✅ Spare parts and service directly from us from our warehouse in Rheda-Wiedenbrück ✅ Immediately available ✅ Factory-tested ✅ Ready for use ✅ Europe-wide delivery possible via freight forwarder 📩 Request now and secure an individual offer! 📍 Location: Rheda-Wiedenbrück 📅 Come by, test the machine, and convince yourself on site! Inspection possible by appointment.

Condition: new, Year of construction: 2024, functionality: fully functional, Next-Generation Mobile Banding Machine – Flexible, Efficient, and Innovative Looking for a modern and efficient solution for bundling and labeling your products? Our next-generation mobile, manually operated banding machine combines maximum flexibility with innovative technology to deliver reliable and cost-effective packaging processes. Its compact design allows the machine to be easily moved and used at different workstations. The intuitive operation enables fast and secure banding of products, cartons, printed materials, and bundled goods. A key feature is the vacuum-assisted band guiding system, ensuring precise, smooth, and highly reliable band feeding throughout the banding process. In addition, the machine features QOL (Quick-On-Line) band changes, significantly reducing setup times and minimizing downtime. This results in increased productivity, greater operator convenience, and a more efficient packaging workflow. Key Benefits: Mobile design for maximum flexibility Simple and intuitive manual operation Next-generation banding technology Innovative vacuum-assisted band guiding system for enhanced process reliability QOL (Quick-On-Line) band changes for rapid material replacement Reduced setup times and downtime Compatible with paper and plastic banding materials Compact, space-saving construction Sustainable packaging solution with reduced material consumption Ideal for small to medium production volumes Applications: Shipping and logistics Food and consumer goods industries Printing and publishing Warehousing and order fulfillment Dcedozd Aqkopfx Amgji Retail and manufacturing The next generation of banding technology – mobile, reliable, and efficient.

Condition: new, Year of construction: 2021, Mobile Banding Machine – Flexible, Compact, and Ready to Use Looking for a simple and efficient solution for bundling and labeling your products? Our mobile, manually operated banding machine offers maximum flexibility for a wide range of applications in production, shipping, and logistics. Thanks to its compact design, the machine can be easily moved and used at different workstations. Its user-friendly operation enables fast and reliable banding of products, cartons, printed materials, and bundled goods without the need for complex installation. Using paper or plastic bands, products can be neatly bundled, identified, and secured for transport. Key Benefits: Mobile design for flexible use Manual operation – simple and intuitive Fast bundling and labeling of products Suitable for paper and plastic banding materials Compact, space-saving construction Sustainable packaging solution with reduced material consumption Ideal for small to medium production volumes and seasonal applications Applications: Shipping and logistics Dodpfxezd Apgo Amgjci Food and consumer goods industries Printing and publishing companies Warehousing and order fulfillment Retail and manufacturing operations Bundle efficiently, package sustainably, and work flexibly with a mobile banding machine designed for modern business needs. Suggested Advertisement Headline: Mobile Banding Machine – Flexible Bundling, Easy Operation, Sustainable Packaging

Condition: like new (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 837192, total width: 1,300 mm, total length: 2,110 mm, total height: 1,500 mm, outer diameter of label roll: 300 mm, inside diameter of label roll: 76 mm, input voltage: 230 V, All-around labeling machine 152C Machine running direction from left to right, viewed from the operator side - Aluminum frame + plate - Machine is mobile - Equipped with the HERMA 500 labeling unit - Printer integration possible after technical evaluation - Product diameter possible after technical evaluation from 20-100 mm Dcsdpfx Asziygtomgei - Roll separator diameter 100 mm - Belt conveyor belt length approx. 1,540 mm, width 100 mm with a conveyor belt that can handle accumulating products - Lockable main switch with emergency stop function mounted on the top of the base frame Further information available upon request. Additional demonstration machines are regularly available in our standard range. We would also be pleased to invite you to our showroom to familiarize yourself with the machines during a visit or live demonstration. Please feel free to bring your own products so that we can demonstrate the application in a practical manner under your individual conditions.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: BDE-821809, total width: 3,200 mm, total length: 6,300 mm, total height: 3,500 mm, For sale is a Huning SBCK-060 m³ walking floor container, designed as a two-material conveying system with two 60 m³ compartments, including associated spiral conveyors (for material discharge, with a vertical and horizontal configuration, see photos) and a G420 weighing system (by P.T.M.). The system is used for the metered discharge of biomass, compost, silage, wood chips, and comparable bulk materials. Thanks to the SBC twin design, the system can alternately meter two different bulk materials. The container was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in very good condition and fully functional. Key data: - Year of manufacture: 2012 - Serial number: BDE-821809 - Type: SBCK-060 m³ walking floor Dcjdpfx Amszgut Asgoi - Design: SBC twin with loosening shaft - Volume: approx. 2 x 60 m³ - Dimensions: approx. 6,300 × 3,200 mm - Overall height: approx. 3,500 mm - Pusher frame: S235 - Operating hours: approx. 300–400 h The internal conveyors are not part of the offer, but can be included as a package if desired (see photos). Further details can be provided upon request. Detailed technical documentation is available. Sale from the Diekirch, Luxembourg location. Dismantling, loading, collection, and transport are the responsibility of the buyer and are not included in the offer.

Condition: used, Year of construction: 2002, Rico Unpacking System Varia with S7 control The machine is dusty but in good condition. Djdpfxjziwyqs Amgoci