Used Bitumen Storage Hoppers for sale (10,796)

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Model: Trail jet 30 500-30-95-d Hfodpfxjy Sazfo Airol Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. Hedpfxox D Df No Airjfl - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: like new (used), Year of construction: 2019, We now have two Kardex Megamat RS 650 units available. Both machines were manufactured in 2019 and put into operation in 2020. They have been serviced annually by the manufacturer and are in very good condition. The Kardex Megamat RS 650 is a powerful vertical carousel designed for storing and handling heavy goods. Each carrier (base shelf) can hold up to 650 kg, making the machines suitable for storing large and heavy items. The two machines have a total of 34 carriers (base shelves) and 43 trays: 28 carriers without intermediate shelves, with a height of 348 mm Hfjdpfx Aoz Aiwbjirol 3 carriers with two intermediate shelves, providing a total of 9 trays with a clear height of 115 mm 3 carriers with one intermediate shelf, providing a total of 6 trays with a clear height of 170 mm The machines are also equipped with a Matrix display in the access opening. This LED display shows information such as the picking location, quantity, and other useful details. The Matrix display helps reduce search time and the risk of picking errors, making the picking process faster and easier. To utilize the full functionality of the Matrix display, the machines need to be connected to an ERP or Warehouse Management System (WMS). Technical Information: Model year: 2019 Model: MEG RS 650.1.3250.6.406.34 Machine height: 7,835 mm Machine width: 3,975 mm Machine depth: 1,711 mm Number of carriers: 34 Number of shelves: 9 Maximum carrier height: 348 Carrier width: 3250 Carrier depth: 628 Electronics: 3/N/PE 400V, 20A

Condition: ready for operation (used), Year of construction: 2006, Max. discharge volume: 4000cm³, net hopper volume: 1500cm³, stainless steel construction, corrosion protected, version with memory storage hoppers, circular multihead weighing system operating according to the partial quantity combination principle. Design features: chassis, frame, modules and product contact parts made of V2A, easy cleaning through enclosed design with load cells and vibratory drives integrated into the housing, electrical components integrated into the scale frame. Equipment: central product distributor with vibratory drive, inclination angle 20°, vibratory feed chutes with quick-release fasteners, dosing hoppers with motor-operated opening flaps, each driven by a separate motor, weighing hoppers with double-flap design and motor-operated opening flaps, each driven by a separate motor, all hoppers without flap return springs, storage hoppers arranged below the weighing hoppers to increase performance, line modules consisting of precision strain gauge load cells, hopper actuation system, electronic module for weight signal evaluation, control of the vibratory feed chutes, discharge chutes 55°. Electronics: control system with 32-bit multiprocessor module technology, MultiWeigh touch screen color display, with documentation. An on-site inspection is possible. Hfodpfxozfp Hbe Airjl

Year of construction: 2023, condition: excellent (used), functionality: fully functional, The 2023 Nilma Speedy Cutter is a reliable piece of equipment designed for efficient slicing and dicing in various food processing environments. This used model retains its robust functionality, making it a cost-effective choice for kitchens seeking high performance without the expense of brand-new machinery. Hfodpfxeztxy Ts Airel Engineered with precision, the Speedy Cutter offers consistent and uniform results, catering to a range of fruits, vegetables, and other ingredients. Its intuitive controls and easy-to-clean components ensure smooth operation and maintenance, optimizing productivity. Built to Nilma’s high standards, the Speedy Cutter embodies durability and practicality. This cutter is an excellent choice for anyone in need of dependable equipment that can significantly enhance food preparation processes.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Detailed description For sale: complete aisle Automated Storage and Retrieval System (AS/RS) (Knapp) Ideal lot for integrators and logistics companies wishing to enhance their automated storage capacity. Sold as is, complete lot ready for installation. Less than 100 hours of service! Lot contents: • 10 OSR units (Knapp shuttles) – shuttles for automatic storage and handling • 2 lifts (for connecting levels) • Infeed and outfeed conveyors included (for easy integration into the existing flow) Hfjdpsxtfa Hefx Airsl • 2,200 SILVERLINE plastic containers, European standard (or equivalent) + dividers included • Ladders, rails, and crossbars for racking (structural elements for storage) • Protective mesh (production) • No picking stations included Condition: equipment very little used. Inspected and functional. Sold as is. Numerous spare parts available! Delivery and installation possible, please contact us! No control system service or installation (software) provided. Advantages: • High automated storage capacity (2,200 containers) • Modular Knapp OSR solution, compatible with modern automated environments • Conveyors included to facilitate flow integration Price: €340,000.00 excluding VAT (complete lot). ⚠️ Important: ISC Recycle only handles the sale of the equipment. Integration available upon request.

Condition: good (used), Direct from closed food factory. Dimensions to follow. Hfodpfetp Nz Eex Airjl

Year of construction: 2016, condition: like new (used), Ytron Vibration Mobile Stainless Steel Feeder Hopper EX rated 11 2 D IP65, Atex Vibration motor Temperature probe Year 2016 As new condition Hedszp N Exepfx Airjfl Including control box

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Hjdpfx Aisvvi Anorjfl Storage location: Supplier

Condition: used, DSG Type 17 x 36 Gap Bed Centre Lathe Hfsdpfjzvp Iasx Airjl Ø405mm 4 Jaw Chuck. Swing Over Bed Ø432mm. Swing Over Cross Slide Ø229mm. Swing Over Gap Ø660mm. Centre Height 216mm. Distance Between Centres 1,000mm. (20) Speed Range 16-2,000rpm. Spindle Bore Ø76mm. QTC. S/No. 41238-3-79. With Coolant System, Bott 2 Door Storage Cabinet With Contents Of Toolholders, Tooling & Hand Tools. Steel Storage Rack With 3 Faceplates, 2 Fixed Steadies, Ø305mm 3 Jaw Chuck, Ø305mm 4 Jaw Chuck. Weight 2,540kg.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97.008706/001, total height: 6,500 mm, total width: 3,500 mm, total length: 2,000 mm, load capacity per storage section: 200 kg, This is a carousel racking system from Bellheimer Metallwerk GmbH, available for self-collection, with the following external dimensions (L x W x H): 2000 x 3500 x 6500 mm. Permissible total load capacity: 6330 kg Permissible shelf load with uniform load distribution: 240/200 kg max. Hfodezhu Tfspfx Airol Shelf dimensions (L x W x H): 590 x 2900 x 300 mm The carousel racking system is fully functional and can be inspected on site.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, Essentially consisting of: Hodjq Tcmvjpfx Airjfl Feed hopper (20 and 95 cbm), SANDVIK H-2000 cone crusher, double-deck screening plant, various conveyor and stockpile belts, power generator (300 kVA), electrical installation with control cabinet installed in container, storage silo, dust atomization system

Condition: used, functionality: fully functional, 4 x 20-foot sea containers/storage containers for sale Individual sale or complete purchase possible For sale are 4 used sea containers, which have previously been used as storage containers. The containers are ideally suited as storage, material, tool, or construction site containers, as well as for private or commercial use. Container 1 20-foot standard container Year of manufacture: 1999 External dimensions approx.: 6.06 x 2.44 x 2.59 m (L x W x H) Permissible total weight: 30,480 kg Container 2 20-foot standard container Year of manufacture: 2000 External dimensions approx.: 6.06 x 2.44 x 2.59 m (L x W x H) Hodpfez Ayb Djx Airjfl Permissible total weight: 30,480 kg Container 3 20-foot container Year of manufacture: 2010 External dimensions approx.: 6.06 x 2.44 x 2.90 m (L x W x H) Permissible total weight: 32,500 kg Container 4 20-foot high cube container Internal dimensions according to nameplate: Length: 5.23 m Width: 2.35 m Height: 2.39 m External dimensions approx.: 6.06 x 2.44 x 2.90 m (L x W x H) Condition Used, with signs of wear and tear due to age and use Some signs of rust Ideally suited as a storage and parking container Loading and transport by the buyer

Condition: used, Year of construction: 1995, with new perforated screen used Brand: RSN Hedpfjw U Emkex Airjfl Model: SL 400 Year of manufacture: 1995 CE type certified GS wood dust tested Motor: 18.5 kW Slow-running with hydraulic moving floor Hopper opening: 800 mm x 1000 mm Rotor width: 800 mm x 250 mm Vibration damper Number of knives: 18 pcs Screen hole diameter: 20 mm Original price approx. €27,000.00 Extraction connection: D 180 mm Space requirement approx. 1900 mm x 1300 mm x 1620 mm / plus platform Weight approx. 1500 kg Total connected load approx. 19.5 kW Storage location: 97447 Gerolzhofen, free loaded, unpacked Transfer in current condition as inspected without guarantee or warranty

Condition: used, functionality: fully functional, total height: 5,720 mm, total width: 3,470 mm, total length: 2,300 mm, load capacity per storage section: 250 kg, input voltage: 415 V, warranty duration: 12 months, Equipment: safety light barrier, MODULA LIFT SYSTEM MX25 MX1220043 GREY IN COLOUR 415V Hfjdpfx Aijwtrbgsrjl 250KG PER TRAY TRAY DIMENSIONS 2500mm x 800mm 35 TRAYS KEYPAD OPERATION 12 MONTHS WARRANTY SERVICE & MAINTENANCE CONTRACT AVAILABLE THIS MACHINE IS MODULA AND CAN THEREFORE BE REDUCED IN HEIGHT TO FIT ANY HEIGHT RESTRICTIONS

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Hjdsun Sd Ujpfx Airofl Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: used, Plant for the conditioned milling of malt into grist and for the subsequent storage of the grist. In a conditioning screw conveyor, the malt is moistened with water at 60°C before being ground into grist in the 6-roll mill (Künzel, 1966). The conditioning water is pre-treated in a water treatment system (Täuber, 2019). The grist is collected in a funnel-shaped grist hopper mounted on legs and fed into the grist transport system. Additional title: 6-roll mill for conditioned dry grinding; built between 1966 and 2019 Capacity: 1200 kg/h Hfodpfx Asziy U Djirel Features: 6-roll mill; conditioning screw; water treatment

Condition: used, Year of construction: 2010, load capacity per storage section: 300 kg, We are offering a used Medek pallet racking system / push-back racking system, type Boltless XL, manufactured in 2010, from our own inventory. Technical data: – Manufacturer: Medek – System/Type: Boltless XL push-back racking – Year of manufacture: 2010 – Total length: approx. 10.0 m – 18 push-back channels – 7 pallets per channel Hsdsz Ah E Depfx Airsfl – a total of 126 pallet spaces – permissible pallet weight: max. 300 kg per pallet The racking system is in used condition and has been regularly inspected during operational use. The racking is currently fully assembled and can be inspected by appointment at our location in 63165 Mühlheim am Main. If required, an additional racking inspection can be carried out before delivery. Dismantling, loading, and transport are the responsibility of the buyer and will be carried out at their own cost. The racking is sold in its current assembled condition. Technical data on the system, year of manufacture, and maximum pallet load are documented on the existing nameplate. Further detailed photos and available documents will be provided upon request. Price: €5,500 net plus statutory VAT – negotiable. Location: 63165 Mühlheim am Main, Germany Delivery terms: EXW / from location Sale exclusively to businesses.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 18 h, ✅ Used & in stock ✅ Up to 150mm branch thickness ✅ Shipping available Powerful wood chipper in top condition for sale! The device is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 22h Year of manufacture: 2025 SCHORR WOOD CHIPPER 150MM BRANCH THICKNESS RR150THX Powerful wood chipper for branches up to 15cm in diameter. Extremely robust and compact. -- 420 cc gasoline engine with 12.4 HP -- Self-feeding, no need to push -- 360° discharge -- With drawbar -- Highly user-friendly -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL ENGINE Equipped with a 420 cc gasoline engine, the RR150THX wood chipper offers outstanding performance that effortlessly handles even the most demanding tasks. The engine is conveniently started via an electric starter or pull cord. The engine's power is transmitted to the centrifugal clutch via the V-belt, ensuring consistently powerful power output. The engine also features a low-oil sensor that shuts down the engine if the oil level is too low to prevent serious consequential damage. HIGH PROCESSING CAPACITY With the ability to shred branches up to 15 cm in diameter, our chipper enables efficient and versatile processing of suitable wood stocks. The large hopper opening ensures optimal and convenient material feeding. High-quality workmanship and the use of durable materials ensure a long service life of the chipper, even with intensive use. EFFICIENT CUTTING SYSTEM The blades rotate at speeds of up to 2000 revolutions per minute, ensuring fast and efficient chipping of the material and reducing working time. The blades are made of high-strength steel and specifically designed for the chipper's demanding tasks. EASY MAINTENANCE Access to key components is designed to be particularly user-friendly, allowing maintenance to be performed quickly and easily, minimizing both operating costs and downtime. HIGH MOBILITY Thanks to the integrated drawbar and wheels, the chipper can be easily moved and positioned on your property, making handling, transport, and storage much easier. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model number: RR150THX Drive type: V-belt 17x1255La Max. branch thickness: 150mm Chopping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Weight: 255kg Basic dimensions Overall length: 2700mm Overall width: 1218mm Overall height: 1424mm Discharge angle: 360º Hsdpswh Rnbefx Airsfl Engine Displacement: 420cc Maximum power: 9.1kW / 12.4hp Starter: Recoil starter Our competent team is happy to answer any questions you may have about the SCHORR WOOD CHIPPER 150MM BRANCH THICKNESS RR100THX. We look forward to hearing from you and providing advice. Is the purchase price of a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing options, please feel free to contact us.

Condition: used, maximum load weight: 24,830 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 03/2003, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,870 mm, Equipment: ABS, * Heitling SDB 50 silo for dry feed & delicacies * 7 compartments individually fillable/emptiable * 4 hoppers * Cleaning system with large control/switch box * Hose extensions ----* Storage box * Work light * Chocks * Walkable with protective railing ----* 2nd axle forced steering (TRIDEC BTR) * SAF axles with disc brakes * Wabco braking system with ALB ----* Tire size: 425/65R22.5 * Technical total weight: 32,000 kg * Tare weight: 7,170 kg * Axle distances: 5880mm/2300mm * Overall length: 11,630 mm * TÜV & inspection due: / ----Vehicle number: 11968----Errors and prior sale excepted----Advertising and various lettering have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----* Trade-in of your old vehicle * Periodic technical inspection (TÜV)/inspection * Complete export processing * Arranging financing * Application for export license plates * Vehicle relocation * Vehicle registration * Vehicle recovery and transport Hfedpfsy Rdh Hox Airel ----?YOUR VTS TEAM

Condition: used, maximum load weight: 31,250 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 05/2027, loading space volume: 33 m³, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, * Grain conveyor * Liftable on axles 1 and 3 * SAF axles * Disc brakes * Hardox steel * Roller shutter * Jost outriggers * Foldable underrun protection * Platform * Aluminum ladder incl. bracket * Water tank on the left * Storage box on the right * Hopper * Overall length of the tipper body: 8990 mm * and more * Subject to errors, changes, and prior sale Hfodpfezdwg Tox Airol

Condition: excellent (used), functionality: fully functional, machine/vehicle number: XP2000, total height: 7,550 mm, total width: 2,780 mm, total length: 3,070 mm, load capacity per storage section: 500 kg, construction height: 7,600 mm, type of input current: three-phase, input voltage: 415 V, empty load weight: 500 kg, warranty duration: 12 months, load capacity: 20,000 kg, Equipment: documentation/manual, safety light barrier, Kardex shuttle 500 XP2000 415v Colour Blue & Grey Max load per tray 500Kg Number of Trays 40 Total machine load 20,000 Kg Tray Dimensions width - 2450mm x 864mm depth Hfodpfx Asrgqw Ejirjl Machine Dimensions 7550mm x 2780mm x 3074mm These machines are modula and can be reduced in Height to fit any facility Full installation service available with 12 months warranty Supply only without warranty Service & Maintenance available after installation if required

Condition: used, Linear feeder / Vibratory feeder / Sorting device Hfodpfoxf Urvox Airsl Vibratory linear feeder, vibratory hopper, dosing hopper, storage hopper Vibratory bowl feeder, bowl feeder Vibratory bowl, screw feeding system with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Year of manufacture: approx. 2000 Useful load: approx. 1.5 kg Oscillation frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W = 170 x 60 x 12 mm - Mounted track length 340 mm - Overall height with base plate and oscillating plate approx. 115 mm Required space L x W x H: 400 x 280 x 400 mm Weight: 9 kg Good condition

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine Hsdpfx Aex R Df Soirefl   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: WE173-000000006, total width: 1,350 mm, total length: 2,390 mm, total height: 1,980 mm, overall weight: 250 kg, pressure: 0.3 bar, Industrial HDPE 5000L process cooling tank, 3x 8" outlets either side Choice of 4, price per unit. Hedpjziazwsfx Airjfl