Used Chip Centrifuge Chip Processing for sale (24,113)

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be Lhodpfx Ajydh Agja Ieg lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: used, Year of construction: 2020, Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks: What is a Temperature-Controlled Processing Tank? A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle. Key Features - Heating and Cooling Systems: - Heaters: Can be electric or steam-based to raise the temperature of the contents. - Chillers: Usually water or glycol-based cooling systems to lower the temperature. - Insulation: Tanks often come with insulation to minimize heat loss or gain from external environments, maintaining stable internal conditions. - Temperature Control Systems: Sophisticated controllers and sensors (like thermocouples) monitor and adjust the temperature in real-time, providing precise control over the processing environment. - Mixing Mechanisms: Many temperature-controlled tanks have integrated mixers or agitators to ensure uniform temperature distribution throughout the contents. - Material Construction: Typically made from stainless steel or other materials that are resistant to corrosion and can withstand high temperatures. Applications in the Food Industry - Pasteurization: Heating milk and other liquids to kill bacteria while maintaining product quality. - Cooking: Precise temperature control during cooking processes (e.g., making sauces, soups, or jams) to ensure proper texture and flavor. - Fermentation: Regulating temperatures during fermentation processes (e.g., beer, yogurt) to ensure the right conditions for microbial activity. - Storage: Maintaining the quality of sensitive ingredients (like chocolate or dairy) by controlling temperatures to prevent spoilage. Advantages of Temperature-Controlled Processing Tanks - Quality Assurance: Consistent temperatures lead to uniform product quality, flavor, and texture. - Safety: Helps in maintaining food safety standards by ensuring thorough cooking or pasteurization processes. - Energy Efficiency: Advanced control systems can optimize energy use, reducing operating costs. - Versatility: Suitable for various processes including heating, cooling, and maintaining temperatures for different food products. Considerations - Control Precision: The accuracy of temperature control systems is crucial; look for tanks with advanced control features for better reliability. - Cleaning: Ensure that the tank design allows for easy cleaning to comply with sanitation standards, especially in the food industry. - Integration: Consider how easily the tank can be integrated into existing processing lines and systems. High shear mixers are essential equipment in the food processing industry, particularly for emulsifying, blending, and homogeneously mixing ingredients with varying viscosity levels. Here’s an overview of how they work and their applications: Ljdpoy E Hy Uofx Aa Iehg What is a High Shear Mixer? A high shear mixer is designed to create high shear forces that thoroughly mix ingredients together. It typically consists of a rotor-stator assembly where the rotor rapidly spins, creating a vacuum that draws ingredients into the m...

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Ljdjhwt H Aopfx Aa Ijhg Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Leder R Ewlopfx Aa Iohg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Ljdpsif Sg Sjfx Aa Ijhg Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: excellent (used), Schmalenberger Z32-16 centrifugal pump / coolant pump Lhsdpfx Asq I N Htea Isg

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available. Lhodpfx Asy Tiyaja Ieg

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Ljdpfxjy Tindj Aa Ijhg Drive power 30 kw A total of four dryers of this model are available.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Lhodpfxjy Th Ipo Aa Isg A total of four dryers of this model are available.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Ledpfxoy Thw Re Aa Ishg Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw

Condition: ready for operation (used), functionality: fully functional, Wolfking 1500 L spiral / paddle mixer whit discharge hatch in the bottom. Very strong built model that is perfect for hard and heavily products. Lhsdpfsy Tl Rhex Aa Ieg

Condition: used, Wolfking TSMV 1750 L double-paddle mixer designed for cooling with injection and vacuum. A very strong and reliable machine. Lhodpfx Aey Tl Imja Ijg

Condition: good (used), Karl Schnell FD3 Process Automat Cutter-Mixer-Emulsifier This machine combines in a unique way mixer, cutter and emulsifier in a closed system. The advantages are obvious: – Space-saving by compact design, – Complete evacuation of the product in the pre-cutting bowl under vacuum with simultaneous mixing and premincing, – Stable end product with reproducible quality by fully automatic process control, – The possibility for direct and indirect heating and cooling, – The possibility to produce fine emulsion and paste-like masses as well as products with fine- up to coarse grained small pieces. In short: Time and cost saving with improved product quality. Manufacturer: Karl Schnell Model: FD 3 Hole Plate: 175 mm Batch Capacity: 310 liter Drive Emulsifier: 18/37 kW Pre-mincing motor: 15/30 kW Agitator motor: 0,7 kW Ljdpfexnkcisx Aa Ijhg Revolution agitator: 13,3 min-1 Drive infeed screw: 1,5 kW Machine Dimensions LxWxH: 2.250x1.800x2.100 mm Machine Weight: 3.000 kg.

Condition: used, This listing is for Eppendorf Centrifuge 5804 The unit is in full working condition and ready for immediate use. High-performance benchtop centrifuge designed for medium- to high-throughput applications, offering precise speed control, quiet operation, and compatibility with a wide range of rotors for versatile lab workflows. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Lsdpfx Asy Hwl Rsa Iohg • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: excellent (used), Koppens BR 3000 / 6000 electric fryer. 600mm wide belt with 3m frying length. fire suppression system. working on snack food Lhjdpfx Aoy H Rkaea Ieg

Condition: used, Cam switch assembly with 6 switching tracks, tool monitoring, process monitoring BALLUFF type BSW 493-6 K3 /06 Year of manufacture: 1988 Number of cam switches: 6 Switching voltage: 230 Volts Switching current: 6 A Drive shaft: Ø 20 mm with 6 mm key - 6 mechanical cam switches BALLUFF Ledpfx Ajy Sbw Uea Iohg - Cam length adjustable - Adjustment tool missing Enclosure dimensions (L x W x H): 240 x 185 x 140 mm Weight: 6.3 kg Good condition

Condition: used, functionality: fully functional, Mabi 4QS + Stanze 4H Quadro seam-forming machine and tacking device Mabi 3000E segment shear Mabi casing bending machine Mabi hole punch Mabi 40 cap trimming machine + Mabi 4K cap punch Lhodpeyz Ad Uefx Aa Iog

Condition: used, This listing is for the Thermo Scientific Multifuge Pro Centrifuge Series The units are in full working condition and are ready for immediate use The Thermo Scientific™ Multifuge™ Pro Centrifuge Series (including the X4R refrigerated model) is a high-performance, versatile laboratory centrifuge designed for high-capacity, general-purpose processing. Featuring a 4-liter capacity, these units are ideal for cell culture, blood separation, and microbiologyKey Features: - Auto-Lock™ Rotor Exchange: Tool-less, push-button rotor exchange for fast application changes in under 3 seconds. Lhsdpoyt Naxefx Aa Ijg - Intuitive Interface: A full-color touch screen provides easy, rapid programming, with storage for up to 100 programs. - Versatility & Capacity: Compatible with up to 18 different rotors (swing-out and fixed-angle) with a maximum speed of 15,200 rpm (up to 25,830 x g). - Sample Protection: ClickSeal™ biocontainment lids provide certified, glove-friendly, snap-on sealing for safety. - Efficient Design: The X4R refrigerated model includes a powerful cooling system for temperature-sensitive samples, with a range of -10°C to +40°C. - SMARTSpin™ Technology: Advanced rotor management optimizes acceleration, braking, and residual load imbalance.

Condition: excellent (used), Kolbe stainless steel Bandsaws several Models available Models K430 and 380 saws Lhedpov Aktbofx Aa Ieg Fixed tables Offered in guaranteed good working condition Year 2016 / 2018

Condition: refurbished (used), Kolbe stainless steel Bandsaws - 7 machines in total Model K430 S Year 2018 Fixed table Ljdpfx Aasvzmmue Ijhg Excellent condition

Condition: good (used), Year of construction: 2005, Machine is in good working condition. Lhodpoy T I U Njfx Aa Iog

Condition: used, working area 2.600 x 1.250 mm spindle drive 7,5 kW feed max. 38 m/min x-axis 2.700 mm y-axis 1.600 mm Ljdpfx Aon A Dwgsa Iohg z-axis 250 mm SCM Routech R 3000 CNC machining center for processing sheet material with automatic feeding (vacuum destacker) and discharge. Video: Upon request Special price for self-disassembly and self-collection.

Condition: excellent (used), Toyo Jidoki TT9-CW Rare 2 lane pouch filling and sealing machine, for tear top stand up pouches. In excellent condition direct from ultra high care factory. Perfect for packing sauces, dairy products, babyfoods, ready meals etc. Lhsdpfxsyzi Ige Aa Ieg

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,000 kg, Discover the GEA-CFS SuperFry 5000/650 Fryer, an industrial fryer specifically engineered for continuous large-scale frying operations. Its stainless steel construction ensures robustness and durability, making it ideal for demanding food production environments. Thanks to its automated conveyor, it efficiently handles high volumes of food, ensuring uniform and precise cooking of products. Additionally, the SuperFry is equipped with advanced control and safety systems. It enables precise adjustment of conveyor speed, ranging from 1.2 to 15 m/min, and frying time, from 20 to 250 seconds. As a result, it offers exceptional flexibility to meet the specific requirements of any production process. Optimized sediment management and oil circulation contribute to superior finished product quality. Regarding technical specifications, the machine provides an output of 313 kW and operates at 3 x 400V, 50Hz. The minimum oil volume is approximately 1,009 liters with an oil level 2 cm above the conveyor. Weighing 4,000 kg, it is also equipped with electric lifters, a circulation pump, and a sediment removal system. Finally, a required amperage of 462A highlights its energy performance. The SuperFry 5000/650 is thus the ideal solution for companies seeking to optimize their frying processes while ensuring impeccable food quality and safety. Technical Specifications: Manufacturer: GEA-CFS Model: SuperFry 5000/650 All stainless steel Capacity: 3 x 400V, 50Hz Power: 313 kW Adjustable speed Minimum oil volume at 2 cm above conveyor: approx. 1,009 L Weight: 4,000 kg Amperage: 462A Lhsdpfou Hhvfex Aa Ieg Frying time: 20-250 sec Conveyor speed: 1.2-15 m/min Equipped with electric lifters, circulation pump, sediment removal

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively Lsdpswm Nq Eefx Aa Iehg